Modelling forest management within a global vegetation model—Part 2: Model validation from a tree to a continental scale

The construction of a new forest management module (FMM) within the ORCHIDEE global vegetation model (GVM) allows a realistic simulation of biomass changes during the life cycle of a forest, which makes many biomass datasets suitable as validation data for the coupled ORCHIDEE-FM GVM. This study uses three datasets to validate ORCHIDEE-FM at different temporal and spatial scales: permanent monitoring plots, yield tables, and the French national inventory data. The last dataset has sufficient geospatial coverage to allow a novel type of validation: inventory plots can be used to produce continuous maps that can be compared to continuous simulations for regional trends in standing volumes and volume increments. ORCHIDEE-FM performs better than simple statistical models for stand-level variables, which include tree density, basal area, standing volume, average circumference and height, when management intensity and initial conditions are known: model efficiency is improved by an average of 0.11, and its average bias does not exceed 25%. The performance of the model is less satisfying for tree-level variables, including extreme circumferences, tree circumference distribution and competition indices, or when management and initial conditions are unknown. At the regional level, when climate forcing is accurate for precipitation, ORCHIDEE-FM is able to reproduce most productivity patterns in France, such as the local lows of needleleaves in the Parisian basin and of broadleaves in south-central France. The simulation of water stress effects on biomass in the Mediterranean region, however, remains problematic, as does the simulation of the wood increment for coniferous trees. These pitfalls pertain to the general ORCHIDEE model rather than to the FMM. Overall, with an average bias seldom exceeding 40%, the performance of ORCHIDEE-FM is deemed reliable to use it as a new modelling tool in the study of the effects of interactions between forest management and climate on biomass stocks of forests across a range of scales from plot to country.     

Inter-annual variability of ecosystem production in boreal jack pine forests (1975-2004) estimated from tree-ring data using CBM-CFS3

We describe and apply a method of using tree-ring data and an ecosystem model to reconstruct past annual rates of ecosystem production. Annual data on merchantable wood volume increment and mortality obtained by dendrochronological stand reconstruction were used as input to the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS3) to estimate net ecosystem production (NEP), net primary production (NPP), and heterotrophic respiration (Rh) annually from 1975 to 2004 at 10 boreal jack pine (Pinus banksiana Lamb.) stands in Saskatchewan and Manitoba, Canada. From 1975 (when sites aged 41-60 years) to 2004 (when they aged 70-89 years), all sites were moderate C sinks except during some warmer than average years where estimated Rh increased. Across all sites and years, estimated annual NEP averaged 57 g Cm⁻² yr⁻¹ (range −31 to 176 g Cm⁻² yr⁻¹), NPP 244 g Cm⁻² yr⁻¹ (147-376 g Cm⁻² yr⁻¹), and Rh 187 g Cm⁻² yr⁻¹ (124-270 g Cm⁻² yr⁻¹). Across all sites, NPP was related to stand age and density, which are proxies for successional changes in leaf area. Regionally, warm spring temperature increased NPP and defoliation by jack pine budworm 1 year previously reduced NPP. Our estimates of NPP, Rh, and NEP were plausible when compared to regional eddy covariance and carbon stock measurements. Inter-annual variability in ecosystem productivity contributes uncertainty to inventory-based assessments of regional forest C budgets that use yield curves predicting averaged growth over time. Our method could expand the spatial and temporal coverage of annual forest productivity estimates, providing additional data for the development of empirical models accounting for factors not presently considered by these models.     

The sensitivity of carbon sequestration to harvesting and climate conditions in a temperate cypress forest: Observations and modeling

The role of disturbance and climate factors in determining the forest carbon balance was investigated at a Japanese cypress forest in central Japan with eddy flux measurements, tree-ring analyses, and a terrestrial biosphere model. The forest was established as a plantation after intermittent harvesting and replanting between 1959 and 1977, and acted as a strong carbon sink of approximately 500 g C m⁻² year⁻¹ for the measurement years between 2001 and 2007. A terrestrial biosphere model, BIOME-BGC, was validated using the eddy flux data at daily to interannual timescales, and the tree-ring width data at interannual to decadal timescales. According to the model simulation, during the observation period 270 ± 55 g C m⁻² year⁻¹ was additionally sequestered due to the indirect effects of the harvesting and planting, whereas the increase of CO₂ concentration and the change in climate increased the sink of 110 ± 40 and 30 ± 80 g C m⁻² year⁻¹, respectively. The model simulation shows that the forest is now recovering from harvesting, and that harvesting is a more important determinant of the current carbon sink than either interannual climate anomalies or increased atmospheric CO₂ concentration. We found that harvesting with long rotation length could be effective management activity in order to increase carbon sequestration, if the harvested timber is converted into products with long lifecycles.     

Estimating soil carbon turnover using radiocarbon data: A case-study for European Russia

Turnover rates of soil carbon for 20 soil types typical for a 3.7 million km² area of European Russia were estimated based on ¹⁴C data. The rates are corrected for bomb radiocarbon which strongly affects the topsoil ¹⁴C balance. The approach is applied for carbon stored in the organic and mineral layers of the upper 1 m of the soil profile. The turnover rates of carbon in the upper 20 cm are relatively high for forest soils (0.16–0.78% year⁻¹), intermediate for tundra soils (0.25% year⁻¹), and low for grassland soils (0.02–0.08% year⁻¹) with the exception of southern Chernozems (0.32% year⁻¹). In the soil layer of 20–100 cm depth, the turnover rates were much lower for all soil types (0.01–0.06% year⁻¹) except for peat bog soils of the southern taiga (0.14% year⁻¹). Combined with a map of soil type distribution and a dataset of several hundred soil carbon profiles, the method provides annual fluxes for the slowest components of soil carbon assuming that the latter is in equilibrium with climate and vegetation cover. The estimated carbon flux from the soil is highest for forest soils (12–147 gC/(m² year)), intermediate for tundra soils (33 gC/(m² year)), and lowest for grassland soils (1–26 gC/(m² year)). The approach does not distinguish active and recalcitrant carbon fractions and this explains the low turnover rates in the top layer. Since changes in soil types will follow changes in climate and land cover, we suggest that pedogenesis is an important factor influencing the future dynamics of soil carbon fluxes. Up to now, both the effect of soil type changes and the clear evidence from ¹⁴C measurements that most soil organic carbon has a millennial time scale, are basically neglected in the global carbon cycle models used for projections of atmospheric CO₂ in 21st century and beyond.     

Estimating California ecosystem carbon change using process model and land cover disturbance data: 1951-2000

Land use change, natural disturbance, and climate change directly alter ecosystem productivity and carbon stock level. The estimation of ecosystem carbon dynamics depends on the quality of land cover change data and the effectiveness of the ecosystem models that represent the vegetation growth processes and disturbance effects. We used the Integrated Biosphere Simulator (IBIS) and a set of 30- to 60-m resolution fire and land cover change data to examine the carbon changes of California's forests, shrublands, and grasslands. Simulation results indicate that during 1951-2000, the net primary productivity (NPP) increased by 7%, from 72.2 to 77.1 Tg C yr⁻¹ (1 teragram = 10¹² g), mainly due to CO₂ fertilization, since the climate hardly changed during this period. Similarly, heterotrophic respiration increased by 5%, from 69.4 to 73.1 Tg C yr⁻¹, mainly due to increased forest soil carbon and temperature. Net ecosystem production (NEP) was highly variable in the 50-year period but on average equalled 3.0 Tg C yr⁻¹ (total of 149 Tg C). As with NEP, the net biome production (NBP) was also highly variable but averaged −0.55 Tg C yr⁻¹ (total of -27.3 Tg C) because NBP in the 1980s was very low (-5.34 Tg C yr⁻¹). During the study period, a total of 126 Tg carbon were removed by logging and land use change, and 50 Tg carbon were directly removed by wildland fires. For carbon pools, the estimated total living upper canopy (tree) biomass decreased from 928 to 834 Tg C, and the understory (including shrub and grass) biomass increased from 59 to 63 Tg C. Soil carbon and dead biomass carbon increased from 1136 to 1197 Tg C.Our analyses suggest that both natural and human processes have significant influence on the carbon change in California. During 1951-2000, climate interannual variability was the key driving force for the large interannual changes of ecosystem carbon source and sink at the state level, while logging and fire were the dominant driving forces for carbon balances in several specific ecoregions. From a long-term perspective, CO₂ fertilization plays a key role in maintaining higher NPP. However, our study shows that the increase in C sequestration by CO₂ fertilization is largely offset by logging/land use change and wildland fires.     

A geospatial model of forest dynamics with controlled trend surface

This paper proposes a method of controlled trend surface to simultaneously account for large-scale spatial trends and non-spatial local effects. With this method, a geospatial model of forest dynamics was developed for the Alaska boreal forest from 446 constantly monitored permanent sample plots. The geospatial component of this model represented large-scale spatial trends in recruitment, diameter growth, and mortality. The model was tested on two sets of validation plots which represented temporal and spatial extensions of the current sample coverage. The results suggest that the controlled trend surface model was generally more accurate than both the non-spatial and conventional trend surface models. With this model, we mapped the forest dynamics of the entire Alaska boreal region by aggregating predicted stand states across the region. It was predicted that under current conditions of climate and natural disturbances, most of the Alaska boreal forest region may undergo a major shift from deciduous-dominant to conifer-dominant, with an average increase of 0.33 m² ha year⁻¹ in basal area over the Twenty-First Century.     

Spatially distributed modeling of the long-term carbon balance of a boreal landscape

Spatially and temporally distributed information on the sizes of biomass carbon (C) pools (BCPs) and soil C pools (SCPs) is vital for improving our understanding of biosphere-atmosphere C fluxes. Because the sizes of C pools result from the integrated effects of primary production, age-effects, changes in climate, atmospheric CO₂ concentration, N deposition, and disturbances, a modeling scheme that interactively considers these processes is important. We used the InTEC model, driven by various spatio-temporal datasets to simulate the long-term C-balance in a boreal landscape in eastern Canada. Our results suggested that in this boreal landscape, mature coniferous stands had stabilized their productivity and fluctuated as a weak C-sink or C-source depending on the interannual variations in hydrometeorological factors. Disturbed deciduous stands were larger C-sinks (NEP₂₀₀₄ = 150 gC m⁻² yr⁻¹) than undisturbed coniferous stands (e.g. NEP₂₀₀₄ = 8 gC m⁻² yr⁻¹). Wetlands had lower NPP but showed temporally consistent C accumulation patterns. The simulated spatio-temporal patterns of BCPs and SCPs were unique and reflected the integrated effects of climate, plant growth and atmospheric chemistry besides the inherent properties of the C pool themselves. The simulated BCPs and SCPs generally compared well with the biometric estimates (BCPs: r = 0.86, SCPs: r = 0.84). The largest BCP biases were found in recently disturbed stands and the largest SCP biases were seen in locations where moss necro-masses were abundant. Reconstructing C pools and C fluxes in the ecosystem in such a spatio-temporal manner could help reduce the uncertainties in our understanding of terrestrial C-cycle.     

Carbon, nitrogen, oxygen and sulfide budgets in the Black Sea: A biogeochemical model of the whole water column coupling the oxic and anoxic parts

Carbon, nitrogen, oxygen and sulfide budgets are derived for the Black Sea water column from a coupled physical-biogeochemical model. The model is applied in the deep part of the sea and simulates processes over the whole water column including the anoxic layer that extends from ?115 m to the bottom (?2000 m). The biogeochemical model involves a refined representation of the Black Sea foodweb from bacteria to gelatinous carnivores. It includes notably a series of biogeochemical processes typical for oxygen deficient conditions with, for instance, bacterial respiration using different types of oxidants (i.e denitrification, sulfate reduction), the lower efficiency of detritus degradation, the ANAMMOX (ANaerobic AMMonium OXidation) process and the occurrence of particular redox reactions. The model has been calibrated and validated against all available data gathered in the Black Sea TU Ocean Base and this exercise is described in Gregoire et al. (2008). In the present paper, we focus on the biogeochemical flows produced by the model and we compare model estimations with the measurements performed during the R.V. KNORR expedition conducted in the Black Sea from April to July 1988 (Murray and the Black Sea Knorr Expedition, 1991). Model estimations of hydrogen sulfide oxidation, metal sulfide precipitation, hydrogen sulfide formation in the sediments and water column, export flux to the anoxic layer and to the sediments, denitrification, primary and bacterial production are in the range of field observations.With a simulated Gross Primary Production (GPP) of 7.9 mol C m⁻² year⁻¹ and a Community Respiration (CR) of 6.3 mol C m⁻² year⁻¹, the system is net autotrophic with a Net Community Production (NCP) of 1.6 mol C m⁻² year⁻¹. This NCP corresponds to 20% of the GPP and is exported to the anoxic layer. In order to model Particulate Organic Matter (POM) fluxes to the bottom and hydrogen sulfide profiles in agreement with in situ observations, we have to consider that the degradation of POM in anoxic conditions is less efficient that in oxygenated waters as it has often been observed (see discussion in Hedges et al., 1999). The vertical POM profile produced by the model can be fitted to the classic power function describing the oceanic carbon rate (C_R=Z^−α) using an attenuation coefficient α of 0.36 which is the value proposed for another anoxic environment (i.e. the Mexico Margin) by Devol and Hartnett (2001). Due to the lower efficiency of detritus degradation in anoxic conditions and to the aggregation of particles that enhanced the sinking, an important part of the export to the anoxic layer (i.e. 33%, 0.52 mol C m⁻² year⁻¹) escapes remineralization in the water column and reaches the sediments. Therefore, sediments are active sites of sulfide production contributing to 26% of the total sulfide production.In the upper layer, the oxygen dynamics is mainly governed by photosynthesis and respiration processes as well as by air-sea exchanges. ?71% of the oxygen produced by phytoplankton (photosynthesis+nitrate reduction) is lost through respiration, ?21% by outgasing to the atmosphere, ?5% through nitrification and only ?2% in the oxidation of reduced components (e.g. Mn²⁺, Fe²⁺, H₂S).The model estimates the amount of nitrogen lost through denitrification at 307 mmol N m⁻² year⁻¹ that can be partitioned into a loss of ?55% through the use of nitrate for the oxidation of detritus in low oxygen conditions, ?40% in the ANAMMOX process and the remaining ?5% in the oxidation of reduced substances by nitrate.In agreement with data analysis performed on long time series collected since the 1960s (Konovalov and Murray, 2001), the sulfide and nitrogen budgets established for the anoxic layer are not balanced in response to the enhanced particle fluxes induced by eutrophication: the NH₄ and H₂S concentrations increase.     

Modeling net primary production of a fast-growing forest using a light use efficiency model

As interest grows in the quantification of global carbon cycles, Light Use Efficiency (LUE) model predictions of the forest net primary production (NPP) are being developed at an accelerating rate. Such models can provide useful predictions at large scales, but evaluating their performance has been difficult. In this study, a remote sensing-based LUE model was established to estimate forest NPP. Using the forest inventory data (FID) from the regional forest inventory survey in China and established allometric biomass equations, we calculated the biomass, the biomass increment, and the NPP of Eucalyptus urophylla (E. urophylla) plantation plots in the forestry jurisdiction of the Leizhou Forestry Bureau, Southern China. The FID-based NPP and the NPP from LUE model predictions were then compared to each other. Results show that the NPP from model predictions at a spatial resolution of 30 m × 30 m varied from 0 to 265 gC/(m² month) and showed regional differences. In addition, the stand age had variable effects on the average individual biomass of the E. urophylla plantation plots. The average individual biomass of the young and mid-age forests increased exponentially and logarithmically with the stand age (R² = 0.9178 and R² = 0.8683), respectively. For young and mid-age E. urophylla plantation plots, the LUE model-predicted NPP was fairly consistent with the FID-based NPP, but the model predictions of the NPP were higher than the estimates from FID. Through the analysis of the causes of uncertainty and the possible reasons for the discrepancy between the model-based NPP and FID-based NPP, the FID-derived estimates provided a foundation for model evaluation.     

Dealing with microtopography of an ombrotrophic bog for simulating ecosystem-level CO2 exchanges

Peatlands contain approximately 25% of the global soil carbon (C), despite covering only 3% of the earth's land surface. In order to evaluate the role of peatlands in global C cycling, models of ecosystem biogeochemistry are required, but peatland ecosystems present a number of unique challenges, particularly how to deal with the large variability that occurs at scales of one to several metres. In models, spatial variability is considered either explicitly for each individual unit and the outputs averaged, referred to as flux upscaling, or implicitly by weighting model parameters by the fractional occurrence of the individual units, referred to as parameter upscaling. The advantage of parameter upscaling is that it is much more computationally efficient: a requirement for hemispheric scale simulations. In this study we determined the differences between modelling a raised bog peatland with hummock-hollow microtopography using flux and parameter upscaling. We used the McGill Wetland Model (MWM), a process-based ecosystem C model for peatlands, configured for hummocks and hollows separately and then a weighted mixture of both. The simulated output based on flux and parameter upscaling was compared with eddy-covariance tower measurements. We found that net ecosystem production (NEP) for hollows was much larger than that for hummocks because total ecosystem respiration (TER) for hummocks was greater while gross primary production (GPP) did not differ significantly between the two topographic features. However, despite differences in components of NEP between hummocks and hollows, there was no statistically significant difference between the NEP based on flux and parameter upscaling using the MWM. Both flux and parameter upscaling show equivalent capability to capture the magnitude, direction, seasonality and inter-annual variability. The root-mean-square-errors (RMSE) are 0.66, 0.45, and 0.49 g C m⁻² day⁻¹, respectively for GPP, TER and NEP based on the flux upscaling, while 0.67, 0.44, and 0.48 g C m⁻² day⁻¹, respectively based on the parameter upscaling. The degree of agreement (d*) is 0.96, 0.97, and 0.88, respectively for GPP, TER and NEP based on the flux upscaling, while 0.96, 0.97, and 0.89, respectively based on the parameter upscaling. This result suggests that differences in processes caused by peatland microtopography scale linearly, which means an ecosystem-level model set-up (i.e. parameter upscaling scheme), is sufficient to simulate the C cycling.     

Development of TRIPLEX-Management model for simulating the response of forest growth to pre-commercial thinning

In order to simulate forest growth response to pre-commercial thinning (PCT), TRIPLEX1.0 - a process-based model designed to predict forest growth as well as carbon (C) and nitrogen (N) dynamics - was modified and improved to also simulate managed forest ecosystem thinning practices. A three-parameter Weibull distribution model was integrated to simulate thinning treatments within the newly developed TRIPLEX-Management model. The thinning intensity component within the model allows users to simulate thinning treatments by applying basal area, stand density and volume to quantify thinning intensity. Natural mortality decreased following thinning due to an increase in growing space for residual stems. Predicted litterfall pools also increased after thinning events took place. The TRIPLEX-Management model was tested against published observational data for Jack Pine (Pinus banksiana Lamb.) stands subjected to PCT in Northwestern Ontario, Canada. The coefficients of determination (R²) between the predicted and observed variables including stand density, mean DBH (diameter at breast height), the quadratic mean DBH, total volume and merchantable volume as well as belowground, aboveground, and total biomass ranged from 0.50 to 0.88 (n = 20, P < 0.001) with the exception of mean tree height (R² = 0.25, n = 20, P < 0.05). Overall, the Willmott index of agreement between predicted and observed variables ranged from 0.97 to 1.00. Results show that the TRIPLEX-Management model is generally capable of simulating growth response to PCT for Jack Pine stands.     

Ecological role of stomatopods (mantis shrimps) and potential impacts of trawling in a marine ecosystem of the southeast coast of India

Ecosystems are balanced by nature and each component in the system has a role in the sustenance of other components. A change in one component would invariably have an effect on others. Stomatopods (mantis shrimps) are common and ecologically important predatory crustaceans in tropical marine waters. The ecological role of mantis shrimps and potential impacts of trawling in a marine ecosystem were estimated using Ecopath with Ecosim (EwE) Version 5.0 software, by constructing a mass balanced Ecopath model of Parangipettai (Porto Novo) ecosystem. Based on fisheries information from the region, 17 ecological groups were defined including stomatopods. Both primary and secondary data on biomass, P/B, Q/B and diet composition were used as basic inputs. The mass balanced model gave a total system throughput of 14,756 t km⁻² year⁻¹. The gross efficiency of 0.000942 indicated higher contribution of lower food chain groups in the fishery though the mean trophic level was 3.08. The immature and developing stage of the ecosystem was indicated by the ratio of total primary production and total respiration (1.832) and the net system production (2643.30 t km⁻² year⁻¹). Key indices (flow to detritus, net efficiency and omnivory index), split mortality rates and mixed trophic impact of different ecological groups were obtained from the model. A flow diagram was constructed to illustrate the trophic interactions, which explained the biomass flows in the ecosystem with reference to stomatopods. Two temporal simulations were made, with 10 year durations in the mass balanced Ecopath model by using ecosim routine incorporated in EwE software. The effect of decrease in biomass of stomatopods in the ecosystem was well defined, in the first run with increase in stomatopod fishing mortality, and the group showed a high positive impact on benthopelagic fish biomass increase (129%). The simulation with increase in trawling efforts resulted in the biomass decline of different ecological groups as elasmobranchs to 1%, stomatopods to 2%, crabs and lobsters to 36%, cephalopods to 63%, mackerel to 78%, and shrimps to 89%. Present study warns stomatopod discards and further increase in trawling efforts in the region and it explained the need for ecosystem based fisheries management practices for the sustainability of marine fisheries.     

Application of a three-dimensional model for assessing effects of small clear-cuttings on radiation and soil temperature

A three-dimensional model Mixfor-3D of soil–vegetation–atmosphere transfer (SVAT) was developed and applied to estimate possible effects of tree clear-cutting on radiation and soil temperature regimes of a forest ecosystem. The Mixfor-3D model consists of several closely coupled 3D sub-models describing: forest stand structure; radiative transfer in a forest canopy; turbulent transfer of sensible heat, H₂O and CO₂ between ground surface and the atmospheric surface layer; evapotranspiration of ground surface vegetation and soil; heat and moisture transfer in soil. The model operates with the horizontal grid resolution, 2 m × 2 m; vertical resolution, 1 m and primary time step, 1 h.     

Restoration of ecosystems for biodiversity and carbon sequestration: Simulating growth dynamics of brigalow vegetation communities in Australia

Restoration of abandoned and degraded ecosystems through enhanced management of mature remnant patches and naturally regenerating (regrowth) forests is currently being used in the recovery of ecosystems for biodiversity protection and carbon sequestration. Knowledge of long-term dynamics of these ecosystems is often very limited. Vegetation models that examine long-term forest growth and succession of uneven aged, mixed-species forest ecosystems are integral to the planning and assessment of the recovery process of biodiversity values and biomass accumulation. This paper examined the use of the Ecosystem Dynamics Simulator (EDS) in projecting growth dynamics of mature remnant brigalow forest communities and recovery process of regrowth brigalow thickets. We used data from 188 long-term monitored plots of remnant and regrowth forests measured between 1963 and 2010. In this study the model was parameterised for 34 tree and shrub species and tested with independent long-term measurements. The model closely approximated actual development trajectories of mature forests and regrowth thickets but some inaccuracies in estimating regeneration through asexual reproduction and mortality were noted as reflected in stem density projections of remnant plots that had a mean of absolute relative bias of 46.2 (±12.4)%. Changes in species composition in remnant forests were projected with a 10% error. Basal area values observed in all remnant plots ranged from 6 to 29 m² ha⁻¹ and EDS projections between 1966 and 2005 (39 years) were 68.2 (±10.9)% of the observed basal area. Projected live aboveground biomass of remnant plots had a mean of 93.5 (±5.9) t ha⁻¹ compared to a mean of 91.3 (±8.0) t ha⁻¹ observed in the plots. In regrowth thicket, the model produced satisfactory projections of tree density (91%), basal area (89%), height (87%) and aboveground biomass (84%) compared to the observed attributes. Basal area and biomass accumulation in 45-year-old regrowth plots was approximately similar to that in remnant forests but recovery of woody understorey was very slow. The model projected that it would take 95 years for the regrowth to thin down to similar densities observed in original or remnant brigalow forests. These results indicated that EDS can produce relatively accurate projections of growth dynamics of brigalow regrowth forests necessary for informing restoration planning and projecting biomass accumulation.     

Assessing biomass gains from marsh restoration in Delaware Bay using Ecopath with Ecosim

The Delaware Bay ecosystem has been the focus of extensive habitat restoration efforts to offset finfish losses due to mortality associated with power plant water intake. As a result, a 45 km² or a 3% increase in total marsh area was achieved by 1996-1997 through the restoration efforts of the Public Service Enterprise Group (PSEG). To quantify the impact of restoration efforts on system productivity, an Ecopath with Ecosim model was constructed that represented all major components of the ecosystem. The model consisted of 47 functional groups including: 27 fish species, 5 invertebrate groups, 4 multi-species benthic groups, 6 multi-species fish groups, 3 plankton groups, 1 shorebird group and 1 marine mammal group. Biomass, abundance, catch, and demographic data were obtained from the literature or from individual stock assessments conducted for principal ecosystem components. A base Ecosim model was fitted to time series of key species in the Bay representing the period 1966-2003. To access the gains from marsh restoration, model simulations reflecting no restoration were conducted to estimate the productivity that would have been lost if restoration efforts had not occurred. The results indicated that restoration increased total ecosystem biomass by 47.7 t km⁻² year⁻¹. Simulations indicated increased biomasses across a wide range of species including important forage and commercially important species. The marsh restoration also significantly impacted ecosystem structure increasing the ratio of production-to-respiration, increasing system path length and decreasing the ratio of production-to-biomass.     

Estimation of annual potential evapotranspiration at regional scale based on the effect of moisture on soil respiration

Potential evapotranspiration (PET) is an important component of water cycle. For traditional models derived from the principle of aerodynamics and the surface energy balance, its calculation always includes many parameters, such as net radiation, water vapor pressure, air temperature and wind speed. We found that it can be acquired in an easier way in specific regions. In this study, a new PET model (PETP model) derived from two empirical models of soil respiration was evaluated using the Penman-Monteith equation as a standard method. The results indicate that the PETP model estimation concur with the Penman-Monteith equation in sites where annual precipitation ranges from 717.71 mm to 1727.37 mm (R² = 0.68, p = 0.0002), but show large discrepancies in all sites (R² = 0.07, p = 0.1280). Then we applied our PETP model at the global scale to the regions with precipitation higher than 700 mm using 2.5° CMAP data to obtain the annual PET for 2006. As expected, the spatial pattern is satisfactory overall, with the highest PET values distributed in the lower latitudes or coastal regions, and with an average of 1292.60 ± 540.15 mm year⁻¹. This PETP model provides a convenient approach to estimate PET at regional scales.     

Evaluating weather effects on interannual variation in net ecosystem productivity of a coastal temperate forest landscape: A model intercomparison

Forest productivity is strongly affected by seasonal weather patterns and by natural or anthropogenic disturbances. However weather effects on forest productivity are not currently represented in inventory-based models such as CBM-CFS3 used in national forest C accounting programs. To evaluate different approaches to modelling these effects, a model intercomparison was conducted among CBM-CFS3 and four process models (ecosys, CN-CLASS, Can-IBIS and 3PG) over a 2500 ha landscape in the Oyster River (OR) area of British Columbia, Canada. The process models used local weather data to simulate net primary productivity (NPP), net ecosystem productivity (NEP) and net biome productivity (NBP) from 1920 to 2005. Other inputs used by the process and inventory models were generated from soil, land cover and disturbance records. During a period of intense disturbance from 1928 to 1943, simulated NBP diverged considerably among the models. This divergence was attributed to differences among models in the sizes of detrital and humus C stocks in different soil layers to which a uniform set of soil C transformation coefficients was applied during disturbances. After the disturbance period, divergence in modelled NBP among models was much smaller, and attributed mainly to differences in simulated NPP caused by different approaches to modelling weather effects on productivity. In spite of these differences, age-detrended variation in annual NPP and NEP of closed canopy forest stands was negatively correlated with mean daily maximum air temperature during July-September (T_amax) in all process models (R² = 0.4-0.6), indicating that these correlations were robust. The negative correlation between T_amax and NEP was attributed to different processes in different models, which were tested by comparing CO₂ fluxes from these models with those measured by eddy covariance (EC) under contrasting air temperatures (T_a). The general agreement in sensitivity of annual NPP to T_amax among the process models led to the development of a generalized algorithm for weather effects on NPP of coastal temperate coniferous forests for use in inventory-based models such as CBM-CFS3: NPP′ = NPP − 57.1 (T_amax − 18.6), where NPP and NPP′ are the current and temperature-adjusted annual NPP estimates from the inventory-based model, 18.6 is the long-term mean daily maximum air temperature during July-September, and T_amax is the mean value for the current year. Our analysis indicated that the sensitivity of NPP to T_amax was nonlinear, so that this algorithm should not be extrapolated beyond the conditions of this study. However the process-based methodology to estimate weather effects on NPP and NEP developed in this study is widely applicable to other forest types and may be adopted for other inventory based forest carbon cycle models.     

A process-based model designed for filling of large data gaps in tower-based measurements of net ecosystem productivity

In this paper we present a simple hybrid gap-filling model (GFM) designed with a minimum number of parameters necessary to capture the ecological processes important for filling medium-to-large gaps in Flux data. As the model is process-based, the model has potential to be used in filling large gaps exhibiting a broad range of micro-meteorological and site conditions. The GFM performance was evaluated using “Punch hole” and extrapolation experiments based on data collected in west-central New Brunswick. These experiments indicated that the GFM is able to provide acceptable results (r² > 0.80) when >500 data points are used in model parameterization. The GFM was shown to address daytime evolution of NEP reasonably well for a wide range of weather and site conditions. An analysis of residuals indicated that for the most part no obvious trends were evident; although a slight bias was detected in NEP with soil temperature. To explore the portability of the GFM across ecosystem types, a transcontinental validation was conducted using NEP and ancillary data from seven ecosystems along a north-south transect (i.e., temperature–moisture gradient) from northern Europe (Finland) to the Middle East (Israel). The GFM was shown to explain over 75% of the variability in NEP measured at most ecosystems, which strongly suggests that the GFM maybe successfully applied to forest ecosystems outside Canada.     

Modeling estuarine-shelf exchanges in a deltaic estuary: Implications for coastal carbon budgets and hypoxia

The export of wetland-derived materials to the coastal ocean (i.e., the “Outwelling” hypothesis) has received considerable attention over the past several decades. While a number of studies have shown that estuaries export appreciable amounts of nutrients and carbon, few studies have attempted to estimate the importance of estuarine sources for the coastal carbon budgets in river-dominated coastal ecosystems. A novel tidal prism model was developed to examine estuarine-shelf exchanges in the Barataria estuary, a deltaic estuary located in the north-central Gulf of Mexico. This estuary has been the site of a massive wetland loss, and it has been hypothesized that carbon export from the eroding coastal wetlands supports the development of a large hypoxic zone in the coastal Gulf of Mexico. The model results show that the Barataria estuary receives nitrogen through the tidal passes and releases carbon to the coastal ocean. The mean calculated tidal water discharge of 6930 m³ s⁻¹ is equivalent to about 43% of the lower Mississippi River discharge. The annual total organic carbon (TOC) export is 109 million kg, or 57 gC m² yr⁻¹ when prorated to the total water area of the estuary. This carbon export is equivalent to a loss of 0.5 m of wetland soil horizon over an area of 8.4 km², and accounts for about 34% of the observed annual wetland loss in the estuary between 1978 and 2000. Compared to the lower Mississippi River, the Barataria estuary appears to be a very small source of TOC for the northern Gulf of Mexico (2.7% of riverine TOC), and is unlikely to have a significant influence on the development of the Gulf's hypoxia.     

Using a fire propagation model to assess the efficiency of prescribed burning in reducing the fire hazard

We examined how fire hazard was affected by prescribed burning and fuel recovery over the first six years following treatment. Eight common Mediterranean fuel complexes managed by means of prescribed burning in limestone Provence (South-Eastern France) were studied, illustrating forest and woodland, garrigue and grassland situations. The coupled atmosphere-wildfire behaviour model FIRETEC was used to simulate fire behaviour (ROS, intensity) in these complex vegetations. The temporal threshold related to the effectiveness of prescribed burning in reducing the fire hazard was assessed from derivated fuel dynamics after treatment. The study showed that prescribed burning treatment was effective for the first two years in most of the Mediterranean plant communities analysed. Thereafter, all forests and shrublands were highly combustible with a fire line intensity of more than 5000 kW/m except for pine stands with or without oak (medium intensity of 2000 kW m⁻¹ 3 years after treatment). Low fire line intensity (900 kW m⁻¹) was obtained for grassland which was entirely treatment-independent since the resprouter hemicryptophyte, Brachypodium retusum, is highly resilient to fire. Fire behaviour was greatly affected by fuel load accumulation of Quercus ilex in woodland, and by standing necromass of Rosmarinus officinalis in treated garrigue. Pure pine stands with shrub strata similar to garrigue showed a lower fire intensity due to wind speed decrease at ground level under tree canopy, underlining the advantage of maintaining a proportion of canopy cover in strategic fuel-break zones.