Iron-doped copper 1,4-benzenedicarboxylate as photo-Fenton catalyst for degradation of methylene blue

Abstract

A metal-organic framework of iron-doped copper 1,4-benzenedicarboxylate was synthesized and, for the first time, utilized as a heterogeneous photo-Fenton catalyst for degradation of methylene blue dye in aqueous solution under visible light irradiation. The synthesized materials were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and energy-dispersive X-ray spectroscopy. The influence factors, kinetics, and stability of the synthesized catalysts were investigated in detail. Iron-doped copper 1,4-benzenedicarboxylate showed higher degradation efficiency than pure copper 1,4-benzenedicarboxylate. An almost complete degradation was achieved within 70?min under visible light irradiation at a solution pH of 6, a catalyst loading of 1?g?L^?1, a H₂O₂ dosage of 0.05?mol L^?1 and methylene blue concentration of 50?mg?L^?1. Recycling studies demonstrated that the iron-doped copper 1,4-benzenedicarboxylate is a promising heterogeneous photo-Fenton catalyst for long-term removal of methylene blue dye from industrial wastewater.     

Photodegradation of an azo dye by silver-doped nano-particulate titanium dioxide

The synthesis of silver doped nano-particulate titanium dioxide (Ag/TiO₂) using a microemulsion method and an investigation of its photocatalytic activity for the degradation of Acid Red 27 in distilled water under UV-irradiation is reported. The prepared Ag/TiO₂ is characterized using transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy. The size of the Ag nanoparticles is around 5–15?nm, with almost uniform distribution on the TiO₂ particles. The efficiency of the photocatalytic process is evaluated to establish the optimum conditions, found to be at 2?wt% of Ag loading on TiO₂, catalyst dosage of 400?mg?L^?1, and calcination temperature of 300°C. Complete decolorization of the dye solution on Ag/TiO₂ was observed in 20?min of UV irradiation in the optimum conditions.     

An electrochemical process that uses an Fe<Superscript>0</Superscript>/TiO<Subscript>2</Subscript> cathode to degrade typical dyes and antibiotics and a bio-anode that produces electricity

In this study, a new water treatment system that couples (photo-) electrochemical catalysis (PEC or EC) in a microbial fuel cell (MFC) was configured using a stainless-steel (SS) cathode coated with Fe⁰/TiO₂. We examined the destruction of methylene blue (MB) and tetracycline. Fe⁰/TiO₂ was prepared using a chemical reduction-deposition method and coated onto an SS wire mesh (500 mesh) using a sol technique. The anode generates electricity using microbes (bio-anode). Connected via wire and ohmic resistance, the system requires a short reaction time and operates at a low cost by effectively removing 94% MB (initial concentration 20 mg?L^–1) and 83% TOC/TOC₀ under visible light illumination (50 W; 1.99 mW?cm^–2 for 120 min, MFC-PEC). The removal was similar even without light irradiation (MFC-EC). The E _Eo of the MFC-PEC system was approximately 0.675 kWh?m^–3?order^–1, whereas that of the MFC-EC system was zero. The system was able to remove 70% COD in tetracycline solution (initial tetracycline concentration 100 mg?L^–1) after 120 min of visible light illumination; without light, the removal was 15% lower. The destruction of MB and tetracycline in both traditional photocatalysis and photoelectrocatalysis systems was notably low. The electron spinresonance spectroscopy (ESR) study demonstrated that ?OH was formed under visible light, and ?O ₂ ^– was formed without light. The bio-electricity-activated O₂ and ROS (reactive oxidizing species) generation by Fe⁰/TiO₂ effectively degraded the pollutants. This cathodic degradation improved the electricity generation by accepting and consuming more electrons from the bio-anode.

Open image in new window

     

Electrochemical degradation of Acid Red I dye and its treatment by UV light

Degradation of Acid Red I (ARI) dye by electrochemical treatment and UV light irradiation was studied in this work. The effect of the current density and the concentration of NaCl and dye on the decoloration and degradation efficiency were studied and optimized. The UV irradiation was monitored by UV-Vis spectrophotometry and chemical oxygen demand. The kinetic constants for decoloration and degradation were calculated. Degradation of 86% was achieved in 160?min and the first-order kinetic constant was 0.013?min^?1. Degradation products were identified by gas chromatography/mass spectrometry. The mechanism for the degradation of ARI was proposed.     

Preparation of effective TiO<Subscript>2</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> photocatalysts for water treatment

Photocatalytic oxidation using semiconductors is one of the advanced oxidation processes for degradation of organic pollutants in water and air. TiO₂ is an excellent photocatalyst that can mineralize a large range of organic pollutants such as pesticides and dyes. The main challenge is to improve the efficiency of the TiO₂ photocatalyst and to extend TiO₂ light absorption spectra to the visible region. A potential solution is to couple TiO₂ with a narrow band gap semiconductor possessing a higher conduction band such as bismuth oxide. Therefore, here we prepared Bi₂O₃/TiO₂ heterojunctions by the impregnation method with different Bi/Ti ratio. The prepared composites have been characterized by UV–Vis diffused reflectance spectra and X-ray diffraction. The photocatalytic activity of the heterojunction has been determined from the degradation of orange II under visible and UV light. Results show that Bi₂O₃/TiO₂ heterojunctions are more effective than pure TiO₂-anatase under UV-A irradiation, with an optimum for the Bi/Ti ratio of 5 %, for the photocatalytic degradation of Orange II. However, the photocatalytic activity under irradiation at λ higher than 420 nm is not much improved. Under UV–visible radiation, the two semiconductors are activated. We propose a mechanism explaining why our products are more effective under UV–visible irradiation. In this case the charge separation is enhanced because a part of photogenerated electrons from the conduction band of TiO₂ will go to the conduction band of bismuth oxide. In this composite, titanium dioxide is the main photocatalyst, while bismuth oxide acts as adsorbent photosensitizer under visible light.     

Preparation of CuO/SiO<Subscript>2</Subscript> and photocatalytic activity by degradation of methylene blue

A photocatalyst based on CuO/SiO₂ was prepared, and evaluated for the degradation of methylene blue in aqueous medium. The photocatalyst was obtained by calcination method of copper salt, in the presence of silica. The characterization by XRD, FTIR, and TPR techniques confirmed the formation of CuO as active phase. SEM studies showed CuO deposited on the surface of SiO₂. By ESI-MS, it was demonstrated that the degradation of methylene blue occurs through successive hydroxylations. Photodegradation assays showed that CuO/SiO₂ was efficient for degradation, and that the material worked better in the presence of UV light.     

Effects of visible light radiation on macrophyte litter degradation and nutrient release in water samples from a eutrophic shallow lake

Visible light is a major fraction of the solar spectrum; however, information on visible light radiation of macrophyte detritus is lacking. In this study, we conducted a microcosm experiment to assess the effects of visible light radiation on degradation of two litter species: Potamogeton malaianus (P. malaianus) and Phragmites australis (Ph. australis). This research represents an investigation of mass loss, microbial activity and nutrients released over a period of 168 days. Overall, we found that visible light radiation had significant effects on litter decomposition, but it did not affect the microbial activities which degrade cellulose and lignin. The decomposition rate order of the three components in P. malaianus and Ph. australis in treatments was: cellulose?>?hemicellulose?>?lignin. The visible light radiation mainly affected the degradation of lignin, which is the primary compound in litter susceptible to photodegradation. The exposure to visible light radiation up to 17.6?Wm^?2 stimulated the dissolved organic carbon release and reduced the molecular weight to less reactive. Meanwhile, no obvious difference in nutrient contents (TP, TN, NO₃–N, NO₂–N, and NH₃–N) was observed among different visible light intensities. The results of this study contribute to better understanding of the photochemical behaviour of macrophyte litter in shallow lakes.     

Effective degradation of tetracycline by mesoporous Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> under visible light irradiation

Bi₂WO₆ was synthesized with a hydrothermal method at different pHs and used for the degradation of tetracycline (TC) in water. The mesoporous Bi₂WO₆ prepared at pH 1 (BWO-1) displayed the highest adsorption and degradation capacity to TC due to its large surface area and more efficient capacity to separate photogenerated electrons and holes. 97% of TC at 20 mg·L^?1 was removed by BWO-1 at 0.5 g·L^?1 after 120 min irradiation under simulated solar light. Only 31% of the total organic carbon (TOC) was removed after 360 min irradiation although the TC removal reached 100%, suggesting that TC was mainly transformed to intermediate products rather than completely mineralized. The intermediates were identified by high-performance liquid chromatography-time of flight-mass spectrometry (HPLC-TOF-MS) and possible photodegradation pathways were proposed.     

Enhanced photocatalytic activity of electrospun TiO2/polyacrylonitrile membranes in a crossflow reactor using dual lights

Photocatalytic membranes reactors have become one of the most efficient technologies to treat polluted waters. However, a major drawback is the unilateral irradiation of the membrane, where only one side of the membrane is exploited. To overcome this issue, we developed a reactor where the membrane can be irradiated on both sides. Polyacrylonitrile membranes containing different amounts of TiO₂ nanoparticles up to 60% were first prepared by electrospinning. These membranes were used in a 3D-printed crossflow photocatalytic membrane reactor for the degradation of methylene blue under different combinations of lights. The use of both sides of the photocatalytic membrane significantly enhanced the photocatalytic activity for the decolorization of methylene blue in water. The prepared membranes showed the best decolorization rate for a loading of 60% of TiO₂ and the use of dual ultraviolet lights, where the methylene blue solution was completely discolored after 90 min. This is the first report of a such system configuration, and this new irradiation concept is promising for photocatalytic membrane reactions and water cleaning.

     

Ag–TiO2 doped photo catalytic degradation of Procion blue H-B dye in textile washwater

The photocatalytic degradation of Procion blue H-B dye in biodegraded textile washwater has been investigated for the complete removal of color and maximum reduction of chemical oxygen demand (COD). Pseudomonas putida was utilized for obtaining biodegraded textile washwater. In this process, silver-doped TiO₂ photocatalyst was prepared and experiments were carried out to study the effects of UV and mercury lamp irradiations on COD reduction and removal of color. The thus prepared silver-doped TiO₂ catalyst was characterized by thermogravimetric and differential thermal analysis, UV-visible spectrometer, X-ray diffraction, scanning electron microscope, energy dispersive X-ray microanalysis, and BET surface area techniques. Adsorption studies were also carried out to evaluate the fitness of isotherm models. The results show that the silver-doped TiO₂ has enhanced the photodegradation of Procion blue H-B dye under UV and mercury lamp irradiations. The enhanced activity of silver-doped TiO₂ is due to the enrichment of electron–hole separation by electron trapping of silver particles.     

Evaluation of kinetics and energy consumption of the electrochemical oxidation of Acid Red 73 in aqueous media

A laboratory scale, undivided electrolysis cell with platinum anode and cathode was used for electrochemical oxidation of the azo dye Acid Red 73 in simulated wastewater. The influence of the supporting electrolyte, applied voltage, pH, initial dye concentration and temperature was studied, and decolorization was monitored by UV/Vis spectroscopy. Energy consumption, current efficiency and the electric energy per order have been also determined. With NaCl (1.5 g L^?1) as supporting electrolyte, at a voltage of 6 V, at neutral pH (6.9) and at 25 °C, the solution of the dye (50 mg L^?1) was completely decolorized within 15 min. The apparent activation energy for electrochemical decolorization was determined as ?1.9 kJ mol^?1.     

Removal of methylene blue by coupling black carbon adsorption with TiO2 photodegradation

In this study, the removal of methylene blue (MB) by the coupling of black carbon (BC) and TiO₂ was investigated. The effects of different parameters such as catalyst dose, sorbent, initial concentrations of dye, pH of the solutions, recycles on discoloration, and chemical oxidation demand (COD) reduction of MB were monitored to optimize the reaction conditions. The discoloration and COD conversation rate of MB obtained by the coupling process were 100% after 90?min irradiation. The synergistic effect of MB-adsorption on BC followed by degradation through TiO₂ photocatalysis was proved by FT–IR spectrophotometer. The BC as by-product of natural materials is a promising adsorbent for waste water treatment.     

Rapid photocatalytic degradation of the recalcitrant dye amaranth by highly active N-WO<Subscript>3</Subscript>

Dye wastewater is a major source of toxic aromatic amines released into the environment. Semiconductor photocatalysis is a clean, solar-driven process for the treatment of dye wastewater. To enhance applicability of semiconductor photocatalysis, the catalyst used should be visible light active. Here we report a facile synthesis of a highly visible-light-active nitrogen-doped tungsten oxide, N-WO₃, by thermal decomposition of peroxotungstic acid–urea complex. The structure and properties of N-WO₃ are characterized by X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy. The photodegradation of amaranth catalyzed by N-WO₃ is evaluated in a batch system under visible and ultraviolet A (UVA) light. Our results show successful doping of N in both interstitial and substitutional sites and the presence of N₂-like species. The N doping surprisingly expands the usable portion of the solar spectrum up to the near-infrared region and enhances the photocatalytic activity. At typical experimental conditions such as 25 mg/L of amaranth, 1 g/L of N-WO₃, and pH 7, 100 % degradation of amaranth is achieved within 2 h under both visible and UVA light. The photocatalytic activity of N-WO₃ is maintained in repeated cycles, indicating its exceptional photostability. To the best of our knowledge, this is the first time that a reusable, highly visible-light-active N-WO₃ can be obtained through thermal decomposition of peroxotungstic acid–urea complex.     

Selective photoreduction of acetonitrile to acetaldehyde in dilute aqueous solutions

Acetonitrile is a commonly used solvent in both industry and research. The treatment of acetonitrile wastes in dilute aqueous solutions with visible light offers advantages to chemical treatment and ultraviolet (UV) irradiation. This study presents the degradation of acetonitrile via a photoinduced electron transfer reaction in the presence of a photosensitizer (dye) and a sacrificial reductant under visible light. Acetonitrile photodegradation (photoreduction) was investigated utilizing a variety of sacrificial reductants and photosensitizers. Optimal results were observed in the presence of methylene green and tri-isopropanolamine with a decrease of acetonitrile in solution to 86% in 24 hours. The only photoreaction product observed was acetaldehyde and a plausible mechanism for the photochemical degradation of acetonitrile is proposed.     

Solar photocatalytic degradation of the herbicide isoproturon on a Bi–TiO2/zeolite photocatalyst

The photocatalytic degradation of the herbicide isoproturon under solar light was investigated in aqueous solution containing a Bi–TiO₂/zeolite photocatalyst. The catalysts were characterized using X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, Fourier transform-infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The effect of Bi–TiO₂ loading onto the zeolite support and influence of the parameters such as catalyst amount, pH, and initial concentration of isoproturon on the degradation rate were evaluated. The recycling ability of the catalyst was found to be sustainable for elongated periods. The high activity of the Bi–TiO₂/zeolite was attributed to its absorptivity of visible light and its high adsorption capacity for the pollutant molecules.     

Acute toxicity of benzophenone-type UV filters and paraben preservatives to freshwater planarian,Dugesia japonica

Fourteen benzophenone-type UV filters and four paraben preservatives were selected to examine their acute toxicities on Dugesia japonica. The 48-h LC₅₀ values for planarians exposed to benzophenone-type UV filters can be ranked as oxybenzone?>?mexenone?>?5-chloro-2-hydroxybenzophenone?> 2,4-dihydroxybenzophenone?>?2-hydroxybenzophenone?>?dioxybenzone?>?benzophenone?>?2,2′,4,4′-tetrahydroxybenzophenone?>?4-hydroxybenzophenone?> 3-hydroxybenzophenone?>?4,4′-dihydroxybenzophenone?>?2,2′-dihydroxy-4,4′-dimethoxybenzophenone?>?2,3,4-trihydroxybenzophenone?>?sulisobenzone with a range from 0.9 to 145?mg?L^?1 with a similar sequence for the 96?h LC₅₀ values, ranging from 0.5 to 77?mg?L^?1. The 48 and 96?LC₅₀ values for planarians exposed to paraben preservatives can be ranked as butylparaben?>?propylparaben?>?ethylparaben?>?methylparaben. Among all the tested chemicals, oxybenzone was the most toxic and sulisobenzone the least toxic chemical to planarian at each exposure period. Most benzophenone-type UV filters are toxic to aquatic animals with 48?h LC₅₀ values less than 10 mg?L^?1, except for 2,2′-dihydroxy-4,4′-dimethoxybenzophenone, 2,3,4-trihydroxybenzophenone, and sulisobenzone. Because of their common occurrence in aquatic environment, more studies on aquatic toxicities of benzophenone-type UV filters and paraben preservativs are needed to provide important information to adequately assess their ecological risk.     

Effects of nanoparticles on Daphnia magna population dynamics

Spherical TiO₂ nanoparticles (npTiO₂) were prepared by controlled hydrolysis of tetraethoxy orthotitanate under a nitrogen atmosphere. ZnO nanoparticles (npZnO) were prepared using hydrothermal methods. The crystal structure, chemical, thermal and morphological properties of npZnO and npTiO₂ were characterised using Fourier Transform Infrared Spectrometer, enery-dispersive X-ray spectroscopy, X-ray diffraction, and scanning electron microscope techniques. The short- and long-term experiments were started with neonates taken from the same culture and laboratory condition. In the acute experiments, npTiO₂, npZnO, and cocktail concentrations were applied. 96h-LC₅₀ values were 1.8, 0.7, and 0.1?mg?L^?1, respectively (p?<?.05). For the chronic experiments, different npTiO₂ concentrations were performed. 21d-LC₅₀ value was 1.0?mgL^?1 (p?<?.05). Morphometry became progressively worse in concentrations of more than 1?mgL^?1 npTiO₂. Neonate and young individuals were more sensitive to death because of their low tolerance. This result was affected by population progeny and growth rates (p?<?.05). While control and 0.5?mgL^?1 npTiO₂ groups were determined as growing population, 1.5 and 2?mgL^?1 npTiO₂ groups had decreased population size as R₀ values. Consequently, the relationships between nanoparticle accumulation within Daphnia magna and its population structure and body morphometry for each concentration were important indicators. Its tolerance level to nanoparticles under laboratory conditions reflected its replacement and behaviour in the ecosystem.     

Thermal treatment of plasma-synthesized goethite improves Fenton-like degradation of orange II dye

Various iron oxides are used for Fenton reactions to degrade organic pollutants. The degradation efficiency may be improved by transforming an iron oxide phase to another. Here, we report on the transformation of goethite into hematite by thermal treatment at 400 °C. The products were analyzed by X-ray diffractometry, Raman spectroscopy, scanning electron microscopy and N₂-physisorption. The catalytic activities were measured for orange II bleaching at initial concentration of 25 mg L^?1, pH 3, catalyst concentration of 0.2 g L^?1; 5 mM H₂O₂, 30 °C. Results show that the synthesized goethite was successfully transformed into hematite, and the specific surface area of the material increased from 134 to 163 m² g^?1. The bleaching efficiency of the orange II dye reached 100 % for the hematite product, versus 78 % for goethite. Therefore, a moderate thermal treatment of a plasma-synthesized goethite improves the catalytic oxidation of organic pollutants.     

Synthesis and antibacterial activity of a Fe3O4–AgCl nanocomposite against Escherichia coli

In this investigation, Fe₃O₄ magnetic nanoparticles (MNPs) were prepared by the alkalinization of an aqueous medium containing ferrous sulfate and ferric chloride. In the next step, a Fe₃O₄–AgCl magnetic nanocomposite was fabricated by the drop-by-drop addition of silver nitrate solution into a NaCl solution containing Fe₃O₄ MNPs. All prepared nanoparticles were characterized by transition electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). Both particle types varied in size from 2.5 to 20?nm, with an average size of 7.5?nm for Fe₃O₄ MNPs and 12.5?nm for Fe₃O₄–AgCl nanocomposites. The antibacterial effect of the Fe₃O₄ MNPs and fabricated Fe₃O₄–AgCl nanocomposites against Escherichia coli (ATCC 35218) were investigated by conventional serial agar dilution method using the Müller–Hinton Agar medium. The minimum inhibitory concentration was 4?mg?mL^?1 for Fe₃O₄ MNPs and 2?mg?mL^?1 for the Fe₃O₄–AgCl magnetic nanocomposites. Time-kill course assays showed that the Fe₃O₄–AgCl magnetic nanocomposites successfully killed all inoculated bacterial cells during an exposure time of 60?min. The antibacterial activity of recycled Fe₃O₄–AgCl magnetic nanocomposites over four 60?min cycles of antibacterial treatment was further tested against E. coli by the colony-forming unit (CFU) method. The antibacterial efficiency of the nanocomposites was constant over two cycles of antibacterial testing.     

Efficient photocatalytic degradation of Rhodamine B dye using ZnO/graphitic C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanocomposites synthesized by microwave

Semiconductor photocatalysis is a solution to issues of environmental pollution and energy shortage because photocatalysis can use solar energy to degrade pollutants. The photocatalytic activity can be improved by using composites of ZnO and other semiconductors. Here, composites of ZnO and polymeric graphite-like C₃N₄ (g-C₃N₄) with high photocatalytic activities were prepared by microwave synthesis. Products were characterized by X-ray diffraction, transmission electron microscopy, ultraviolet–visible and Fourier transform infrared spectroscopy. The photocatalytic degradation of Rhodamine B was tested under irradiation from a Xe lamp. Results show that adding graphite-like C₃N₄ promotes the photocatalytic activity of ZnO. Composites with 1.0 wt% g-C₃N₄ showed the best photodegradation efficiency, and the reaction average energy was approximately 33.71 kJ mol^?1.