Sampling and analysis of particulate and gaseous polycyclic aromatic hydrocarbons from coal tar sources in the working environment

A sampling method for polycyclic aromatic hydrocarbons (PAH) in workplace atmospheres using a standard glass fiber filter with a back-up section of Amberlite XAD-2 is described. Filters and XAD are solvent-desorbed and, without further clean-up, the solutions are submitted to high performance liquid chromatographic analysis using fluorimetric detection. Recovery of PAH from XAD-2 was studied, and was found to be in the range 80–100%. The sampling method was evaluated in a coke plant, an aluminium plant and in a creosote impregnating plant. The method described is rapid and sensitive for the determination of the most important workplace PAH, and accounts for both particulate and gaseous PAH.     

Application of surrogate methods for assessing the bioavailability of PAHs in sediments to a sediment ingesting bivalve

The usefulness of two surrogate methods for rapidly determining the bioavailability of PAHs in hydrocarbon-contaminated marine sediments was assessed. Comparisons are made between the PAHs accumulated by the benthic bivalve, Tellina deltoidalis, and the extractable-PAHs determined using a 6-h XAD-2 resin desorption method and a 4-h gut fluid mimic (GFM) extraction method. There were significant positive relationships between PAH bioaccumulation by the bivalves and sediment PAH concentrations. These relationships were not improved by normalising the sediment PAH concentrations to the organic carbon concentration. The average percentage lipid content of the bivalves was 1.47 ± 0.22% and BSAFs for total-PAHs ranged from 0.06 to 0.80 (kg OC/kg lipid). The XAD-2 and GFM methods both extracted varying amounts of PAHs from the sediments. Low concentrations of PAHs were extracted by the GFM method (0.2–3.6% of total-PAHs in sediments) and the GFM results were inadequate for generalising about the bioavailability of the PAHs in the sediments. The XAD-2 method extracted greater amounts of PAHs (3–34% of total-PAHs in sediments), however, the total-PAH concentrations in the sediments provided a better, or equally good, prediction of PAH bioaccumulation by T. deltoidalis. The results indicated that these methods required further development before they can be applied routinely as surrogate methods for assessing the bioavailability of PAHs in sediments. Future research should be directed towards lowering detection limits and obtaining comparative data for a greater range of sediment types, contaminant classes and concentrations, and organisms of different feeding guilds and with different gut chemistry.     

Aerosol Filtration by Sorbent Beds

Fixed beds of sorbent media are used for the evaluation of poiynuclear aromatic hydrocarbons (PAH) present in air. Twostage sampling and separate extraction and analyses of PAH associated with aerosol particles and those present in the vapor state are usually performed. The ability of commonly used sorbents to retain particulate matter introduces a potential for reducing the time and cost of PAH evaluation procedures.

The filtration efficiency of three sorbent media, Florisil, XAD-2, and polyurethanefoam (PUF), for particles in 0.1 to 1 µm size range was studied using airflow rates from 4 to 2501 /mm through a PS 1 sorbent cartridge. Theoretical considerations were used to identify the principal filtration mechanisms and to assess the predictability of the aerosol filtration performance of sorbent filters. The results of this study indicate XAD-2 to be an efficient filtration medium owing to the electrostatic enhancement of capturing and retaining aerosol particles.

As a result of theoretical considerations, Brownian diffusion and inertial deposition were found to be major filtration mechanisms accompanied by electrostatic effects. While the efficiency of the diffusional deposition mechanism was reasonably well predicted with available theories, modeling of submicron particle impaction at higher fluid velocities appeared to be inadequate. Further developments are suggested to improve our understanding of filtration phenomena in sorbent beds under high flow rate conditions.     

Gaseous and particulate polycyclic aromatic hydrocarbons (PAH) from the marine atmosphere

Despite their importance in environmental studies, there are very few data concerning the gaseous polycyclic aromatic hydrocarbons (PAH) in the marine atmosphere and their potential importance. We present here concentrations and distributions for gaseous and particulate PAH sampled in the atmosphere over the Tropical and Equatorial East Atlantic. After collection respecting ultra-clean conditions, PAH were isolated and analysed through capillary GC and GC/MS. Concentrations of gaseous PAH ranged from 7 to 18 ngm⁻³. They are an order of magnitude higher than those encountered for particulate PAH. This enhances the importance of gaseous PAH vs PAH associated with aerosols and strongly shows their mode in transport and ocean-atmosphere exchange processes. Gaseous PAH are composed almost entirely of extremely volatile compounds such as phenanthrene. On the other hand, aerosol PAH distributions exhibit a predominance of phenanthrene, but also contain substantial amounts of other PAH: fluoranthene, pyrene, chrysene, benzofluoranthenes and benzopyrenes. The comparison between the distributions of PAH and their alkylated homologues, both in the atmosphere and the sea surface mkrolayer collected in the same area, suggests a mixed origin for the gaseous PAH: non-combusted petroleum residues and pyrolytic-like compounds emitted from the ocean.     

Comparison of atmospheric concentrations of currently used pesticides between urban and rural areas during intensive application period in Alsace (France) by using XAD-2® based passive samplers

XAD-2® passive samplers (PAS) have been exposed simultaneously for 14 days on two sites, one rural and one urban, situated in Alsace (East of France) during intensive pesticides application in agriculture (between March and September). PAS have been extracted and analyzed for current-used pesticides and lindane with an analytical method coupling accelerated solvent extraction (ASE), solid-phase microextraction (SPME) and GC/MS/MS. Results show the detection of pesticides is linked to the period of application and spatial and temporal variabilities can be observed with these PAS during the selected sampling period. The spatial and temporal variability is comparable to the one previously observed by comparing data obtained with PAS with data from Hi.-Vol. samplers in an urban area. Sampling rates were calculated for some pesticides and values are comparable to the data already available in the literature. From these sampling rates, concentrations in ng m^?3 of pesticides in PAS have been calculated and are in the same order of magnitude as those obtained with Hi.Vol. sampling during the same period of time.     

Evaluation of solid sorbents for sampling nitroglycerin,ethylene glycol dinitrate and isopropyl nitrate in work-room air

Activated charcoal, Amberlite XAD-2, and Amberlite XAD-7 have been evaluated for the solid sampling of airborne nitroglycerin, ethylene glycol dinitrate and isopropyl nitrate. With the use of diethyl ether for solvent desorption, XAD-2 was found superior for sampling nitroglycerin and ethylene glycol dinitrate. Both XAD-7 and activated charcoal gave high recoveries for isopropyl nitrate; charcoal had a greater capacity than XAD-7 for this compound, however.     

Comparison of various sampling methods for PCDDs and PCDFs in stack gas

There have been discussions about how complete PCDDs and PCDFs are sampled from stack gas of waste combustion plants by various sampling methods. In Germany, at present, a sampling method is used, which was first proposed by Nottrodt et al.¹, consisting of a filter device, condenser, and an absorption train. Since this sampling procedure complicates sampling and analysis, we compared this “standard procedure” with a “dilution method”, where only a filter, impregnated with paraffin, is used as trapping device, and also tested the effectiveness of XAD-2 as an adsorption trap.

As standard procedure the standard train was always used in parallel to other sampling methods. The results of four parallel sampling periods confirmed, that comparable results are obtained, when parallel sampling is carried out with the standard train.

The result of our investigation can be summarized as follows: The total emission of PCDDs and PCDFs determined by different sampling procedures varies only insignificantly. This means that sampling and analysis for PCDDs and PCDFs in stack gas could be simplified considerably.     

PAH deposition to snow surface

The urban snowpack effectively acts as a collection device for atmospheric-deposited PAHs. When these PAHs are flushed out in a short time interval along with springtime snowmelt, these cause shockloading to receiving waters. In order to assess the PAH deposition and accumulation in urban snowpacks, a deposition survey of PAH for the winter months of 1991-92 from the city of Sault Ste. Marie, Ontario, Canada was undertaken. The results of the survey are interpreted in view of prevailing meteorology and various emission sources in the study area. The relative PAH deposition levels (to BaP) are compared with relative source emission fingerprints to examine consistency in sampling and analysis. While analyzing the PAH samples using the ASTM (1987) method, the problem of concentration levels being below the detection level was encountered. The ASTM method for PAH analysis was modified to enhance the detection limit of the PAHs by concentrating the PAH extract to very low volumes, on the order of 200-300 microL.     

Sampling of epichlorohydrin and ethylene chlorohydrin in workroom air using Amberlite XAD-7 resin

Activated charcoal, Amberlite XAD-2 and Amberlite XAD-7 were evaluated for the adsorption of epichlorohydrin and ethylene chlorohydrin from air followed by desorption with solvent. Ethylene chlorohydrin was found to be unstable on activated charcoal in the presence of carbon disulfide. Recoveries from XAD-2 were low, and XAD-7 was found to be the best adsorbent for the sampling of these compounds from air.     

Influence of air humidity on sampling efficiency of some solid adsorbents used for sampling organics from work-room air

The influence of air humidity on the sampling efficiency of Amberlite XAD porous polymers and activated charcoal was studied by determining the recovery of various organics at 20% and 85% relative humidity. The sampling efficiency of XAD-7 was found to decrease with increasing relative humidity, while the sampling efficiency of XAD-2 and activated charcoal was relatively unaffected for the compounds studied. Activated charcoal had a greater capacity than Amberlite XAD for several types of compounds, however.     

Modeling Evidence of Incloud Transformation Of Sulfur Dioxide to Sulfate

Methylene chloride (CH₂Cl₂) is presently under study by the U.S. EPA and other agencies to determine if the compound presents an unreasonable risk to human health and to determine if regulatory action is needed to reduce the risk. This paper describes one portion of the study which required the development and validation of a method of sampling and analysis for source emission measurements.

Prior to source sampling, laboratory experiments were conducted to determine the best sample container in which to collect an integrated sample. It was found that CH₂Cl₂ remained stable in Tedlar bags for at least four weeks. The analytical method selected was gas chromatography with flame ionization detection (GC/FID). During the field portion of the study, both manufacturer and user emission sources of CH₂Cl₂ were tested. Multiple sets of simultaneous quadruplicate bag samples were collected to determine the precision of both sampling and analysis in the field. All samples were analyzed at the test site after collection and then returned to Research Triangle Park. Samples were subsequently reanalyzed in the laboratories of Radian and the U.S. EPA using three GC/FID instruments and two types of GC columns. The range of concentrations from the sources was 100 ppm to 27,000 ppm CH₂Cl₂. A statistical analysis of samples collected simultaneously showed no difference in the samples, proving good precision In both sampling and analysis. Some of the sample bags returned from the test sites developed leaks indicating that immediate on-site analysis is best. A comparison of results obtained in the field and the two laboratories showed that interand intra-laboratory precision was within 10 percent.     

Relative decay index and sources of polycyclic aromatic hydrocarbons

An optimized method for the analysis of polycyclic aromatic hydrocarbons (PAH) in atmospheric aerosols with short sampling times (1h) has been used to determine the daily variations of PAH in the atmosphere. Of the various physicochemical parameters controlling the disappearance of PAH, the most important seem to be the thermic dependence and the chemical reactions with gaseous pollutants (NO_x, O₃, HNO₃, OH). The RDI is used to identify the different sources of urban pollution: domestic heating, vehicle traffic (petrol and diesel), refineries, foundries, incinerators and power stations (coal, gas and oil) and to quantify the results for standard conditions. The characteristic concentration ratios from each source are often different from those in the literature, where the data are based on long sampling times and are affected by PAH reactivity differences. The results obtained are parameters for setting up a mathematical model for calculating concentrations of PAH at any receptor site.     

Analytical procedures to assay environmental samples for PCDD/PCDF, PHA, PCB, chlorobenzenes (CB) and chlorophenols (CP)

Sample extracts from each section of a blank stack sampling train are portioned into two fractions, one to be used for PCDD/PCDF and PCB/CB analysis and the other for PAH/CP. The results of recovery studies for spiked compounds are presented. Developed protocols will be applied to future stack sampling programs and other environmental monitorings.     

Analysis of particulate polycyclic aromatic hydrocarbons by on-line coupled supercritical fluid extraction–liquid chromatography–gas chromatography–mass spectrometry

An on-line supercritical fluid extraction–liquid chromatography–gas chromatography–mass spectrometry (SFE–LC–GC–MS) method was developed for the analysis of the particulate polycyclic aromatic hydrocarbons (PAHs). The limits of detection of the system for the quantification standards were in the range of 0.25–0.57 ng, while the limits of determinations for filter samples varied from 0.02 to 0.04 ng m⁻³ (24 h sampling). The linearity was excellent from 5 to 300 ng (R²>0.967). The analysis could be carried out in a closed system without tedious manual sample pretreatment and with no risk of errors by contamination or loss of the analytes. The results of the SFE–LC–GC–MS method were comparable with those for Soxhlet and shake-flask extractions with GC–MS. The new method was applied to the analysis of PAHs collected by high-volume filter in the Helsinki area to study the seasonal trend of the concentrations. The individual PAH concentrations varied from 0.015 to more than 1 ng m⁻³, while total PAH concentrations varied from 0.81 to 5.68 ng m⁻³. The concentrations were generally higher in winter than in summer. The mass percentage of the total PAHs in total suspended particulates ranged from 2.85×10⁻³% in July to 15.0×10⁻³% in December. Increased emissions in winter, meteorological conditions, and more serious artefacts during the sampling in summer season may explain the concentration profiles.     

Arizona Hazardous Air Pollutants Monitoring Program

ABSTRACT

In order to evaluate the existing risk to public health in Arizona related to hazardous air pollution, ambient air monitoring for selected hazardous air pollutants (HAPs) was carried out in 1994-1996 in several representative urban and rural areas of Arizona. A wide range of organic HAPs was monitored, requiring a variety of sampling and analysis methods. Stainless steel SUMMA canisters were used for collection of volatile hydrocarbons and halocarbons, which were analyzed by capillary gas chromatography with flame ionization and electron capture detection (GC-FID/ECD). Carbonyl compounds were collected using 2,4-dinitrophenylhydrazine-impregnated cartridges and analyzed by high performance liquid chromatog-raphy with ultraviolet detection. Semi-volatile and non-volatile polycyclic aromatic compounds were collected using a sampling train consisting of a filter followed by a PUF/XAD-4/PUF sandwich cartridge. Following extraction, samples were analyzed by capillary GC with mass spectrometric detection (GC-MS). Database software was developed for data processing and reporting functions. This paper describes the sampling strategy and the sampling and analysis methods employed in the monitoring program and presents a summary of all the results obtained during the duration of the sampling program.     

Separation of important PCBs and PAHs on a prototype smectic liquid-crystalline polysiloxane stationary phase capillary column

A prototype smectic liquid-crystalline polysiloxane GC column was tested as stationary phase for the separation of 7 BCR PCBs and 16 EPA PAH compounds. The separation efficiency on the smectic phase was much higher for both groups compared to a non-polar stationary phase column of the DB-5 type. Moreover non-ortho substituted (coplanar) PCBs were well separated from the mono-ortho and diortho PCBs and appeared as a late eluting group. Finally the smectic column is very useful for qualitative analysis of PAHs containing extracts.     

Monitoring of polycyclic aromatic hydrocarbons (PAHs) in the atmosphere of southern Luxembourg using XAD-2 resin-based passive samplers

XAD-2 resin-based passive samplers (PAS) with dimensions adapted to 100 mL accelerated solvent extraction cells were used to study the temporal and spatial variations of 17 PAHs on five sites in the atmosphere of southern Luxembourg. This new design allowed extracting the PAS without emptying the resin from the shelter. PAH analyses were done with gas chromatography–tandem mass spectrometry. PAS were deployed for 1 year with varying sampling periodicities, and 16 PAHs were detected with concentrations ranging from 1 ng/PAS for chrysene to 9,727 ng/PAS for naphthalene. The PAS were found adapted to the monitoring of temporal and spatial variations for lightweight PAHs (up to four aromatic rings) though not for heavy PAHs with five aromatic rings or more, as these compounds are preferably in the particle phase of the atmosphere and the amount of these PAHs trapped on the PAS will be too low.     

Sampling of polychlorinated aromatics in workroom air using Amberlite XAD-2 resin

Amberlite XAD-2 porous polymer was evaluated for the solid sampling of PCBs, PCNs, tri-, tetra-and pentachlorophenol in workroom air. Using solvent desorption, the recoveries of these compounds from XAD-2 was mostly about 80%, showing this adsorbent to be an excellent medium for the sampling of polychlorinated aromatics in air.     

Polycyclic organic material (POM) in urban air. Fractionation,chemical analysis and genotoxicity of particulate and vapour phases in an industrial town in Finland

Polycyclic organic material (POM) was collected by high-volume sampling on filter and on XAD-2 resin from the air of a small industrial town in Finland. Concurrent chemical analysis and the assays for genotoxic activity were performed on the particulate and the vapour phases of ambient air POM and their chemical fractions. Furthermore, correlations between seasonal meteorological parameters and POM concentrations were studied to reveal characteristic POM profiles for various emission sources. The range of total POM concentrations varied from 115 to 380 ng m⁻³ in late spring and from 17 to 83 ng m⁻³ in early winter. No direct correlation of ambient POM was seen with the temperature, but rather with the wind direction from various emission sources. Especially the low molecular weight compounds were associated with wind direction from industrial sources. Genotoxic activity, as detected by the Ames Salmonella/microsome test and the SCE assay in CHO cells, was found not only in the paniculate phase samples but also in the vapour phase. The polar fractions of some of the samples showed genotoxic activity, and also direct mutagenicity was observed with both the assay systems; these facts support the significance of compounds other than conventional polycyclic aromatic hydrocarbons (PAH) in the samples.     

Oxidant denuder sampling for analysis of polycyclic aromatic hydrocarbons and their oxygenated derivates in ambient aerosol: evaluation of sampling artefact

The concentrations of some polycyclic aromatic hydrocarbons (PAH) and oxygenated PAH (O-PAH) can be changed by oxidation reactions during sampling. This can lead to an over- or underestimation of the corresponding adverse health effects. The aim of this study was the evaluation of these sampling artefacts. The potential of using an oxidant denuder was shown by parallel low-volume sampling with and without MnO₂ ozone denuder. Twenty-three PAH and 11 O-PAH in ambient air were analysed, both in the vapour and particulate phase. The denuder was proven to be highly efficient for stripping ozone from air while causing no significant particle losses. In general, the concentrations of 5- to 7-ring PAH, which are predominantly associated with particles, were underestimated in non-denuded samples. The highest losses due to reaction with ozone and other atmospheric oxidants were observed for benzo[a]pyrene and perylene. Concurrently, the concentrations of most of the mainly particle-associated 4- to 5-ring O-PAH were higher in the non-denuded samples. The denuder did not only remove ozone, moreover other gaseous species such as more volatile PAH and O-PAH were partially oxidized on the catalytic surface, too. Degradation of PAH and concurrent degradation/formation reactions of O-PAH occurred. The corresponding reactivities of selected PAH and O-PAH are discussed.