共查询到17条相似文献,搜索用时 93 毫秒
1.
某厂成品油火车装车站台建设较早,主要包括1^#、2^#、3^#、4^#装车站台。灌装出厂的物料主要有汽油、柴油等轻质油品,装车主要采用鹤管敞口上装车。年灌装、输送能力为280万吨,占地面积7.9万平方米。 相似文献
2.
北京市某电厂在向锅炉中输送一种粉体添加剂过程中,输送装置管道发生爆炸,管道被炸裂,添加剂粉尘散落地面并有燃烧现象。据添加剂生产单位介绍,他们曾委托有关科研部门时添加剂粉体进行过燃爆特性测试,结论是该添加剂粉体属于非爆炸性粉体。因此他们认为这次爆炸属于物理爆炸,即由于输送装置管道堵塞;压缩空气产生高压使管道爆炸。但电厂方面认为,输送管道的耐任指标要超过压缩空气的压力值,而且爆炸后散落的粉体发生燃烧,所以这是一起化学爆炸事故。因此双方发生争执,其焦点就是这种添加剂粉体是否为爆炸性粉尘,双方都同意对粉… 相似文献
3.
4.
5.
传统电除尘器、大布袋除尘器输灰系统存在工艺繁杂、能耗大、输送速度慢、系统难于维护及二次扬尘问题,电除尘器、大布袋除尘器输灰系统采用粉料无尘装车技术可有效简化工艺、提高生产速度和系统运行、维护可靠性,很大程度减少能耗并彻底根除二次扬尘。 相似文献
6.
7.
介绍集装车与防尘统一于一体的无尘装车技术及具有设备本质安全化特点的无尘装车机在解决粉状物料装车作业时的扬尘问题,保护作业工人健康,维护厂区环境方面的重要优越性。 相似文献
8.
9.
介绍集装车与防尘统一一于一一的无尘装车技术及其具有设备本质安全化特点的无尘装车机在解决粉状物料装车作业时的扬尘问题,保护作业工人健康,维护厂区环境方面的重要优越性。 相似文献
10.
为了探究不同聚烯烃粉体颗粒在气力输送过程中起电特性,采用一套自制气力输送实验系统,探究了气力输送过程中不同气固浓度参数对PETG、PP、ABS这3种聚烯烃颗粒静电起电特性的影响规律。结果表明:气力输送过程中PETG与PP颗粒带负电荷,ABS颗粒带正电荷,质量流量和输送空气速度对PETG、PP颗粒的荷质比变化呈类似的变化规律,而ABS颗粒的规律则有所不同。随着颗粒质量流量增大,PETG和PP分别表现为总负电荷量减小;而相同质量流量条件下ABS颗粒则表现为总正电荷量增加。随着输送空气速度增加,3种聚烯烃颗粒所带电荷也会增加,但PETG和PP颗粒电荷极性则会出现极大值。 相似文献
11.
为解决皮带运输的防尘问题,通过现场调查、尘源分析、工程实验,对皮带运输设备的防尘措施进行研究,研制成密闭、无动力减压、自动加湿防尘装置,经现场试用,使作业场所空气中粉尘浓度降到国家标准以下,取得良好防尘效果. 相似文献
12.
13.
针对磨细粉煤灰由储料仓向罐式汽车内装料的作业特点,研制了自动化装车除尘系统,解决了装车过程中的粉尘污染问题,并实现了装车过程的自动化。 相似文献
14.
Sławomir Zakrzewski Katarzyna Majchrzycka Agnieszka Brochocka Krzysztof Makowski 《International journal of occupational safety and ergonomics》2013,19(2):164-170
In most industrial enterprises, hazardous factors are present in quantities exceeding permissible levels. Such a situation requires using antidust respiratory protection. It has been suggested, however, that filters for respirators are not assessed properly and that lab results might not be related to real filtering efficiency in industry. This article contains test results of some commercially available filtering half-masks, including the effect of loading with real dust, high humidity, high temperature, and a combination of loading with dust and high humidity on the half-masks’ performance. The results show that the effect of these factors is considerable and that a combination of loading with silica dust and exposing to high humidity can cause a complete loss of performance. 相似文献
15.
Combustible dust explosions continue to present a significant threat toward industries processing, storing, or pneumatically conveying metal dust hazards. Through recent years, investigations have observed the influence of particle size, polydispersity, and chemical composition on dust explosion sensitivity and severity. However, studies characterizing the effect of particle shape (or morphology) on metal dust explosibility are limited and merit further consideration. In this work, high-purity aluminum dust samples of three unique particle morphologies were examined (spherical granular, irregular granular, and dry flake). To maintain consistency in results obtained, all samples were procured with similar particle size distribution and polydispersity, as verified by laser diffraction particle size analysis. Scanning electron microscopy (SEM) imaging and Brunauer-Emmett-Teller (BET) experiments were executed to confirm supplier claims on morphology and to quantify the effective surface area associated with each sample, respectively. Investigations performed in a Kühner MIKE3 minimum ignition energy apparatus and a Siwek 20 L sphere combustion chamber resulted in the direct characterization of explosion sensitivity and severity, respectively, as a function of suspended fuel concentration and variable particle morphology. Recommendations to standard risk/hazard analysis procedures and to existing design guidance for the mitigation of deflagrations that originate from ignition of distinctively processed metal dust fuels have been provided. 相似文献
16.
在公司某煤矿一综掘工作面进行现场实验,设计了若干深10m直径42mm注水钻孔,注水压力26-32MPa,时间为15h;而后取芯进行湿润效果检验,注水后降尘效果检验和沿程粉尘浓度、综合降尘效果分析,结果表明:掘进进尺24 m处各个测尘点粉尘浓度都是最低;全尘的降尘率比呼吸性粉尘总体高些;注水后全尘浓度比注水前下降快 相似文献
17.