A stochastic stormwater quality volume-sizing method with first flush emphasis

A Monte Carlo simulation technique was applied to assess the effect of stormwater quality volume captured by best management practices (BMPs) on the frequency of discharging concentrations of constituents above certain designated threshold limits. The method used an assumption of a power law relationship between the cumulative load and flow to incorporate the first flush effect. The exponent of this relationship was considered a random variable and its frequency distribution was obtained from 78 measured pollutographs from three urban highway sites in West Los Angeles, California. Although the effect of rain depth captured by BMPs is site-specific, the method offered here provides a systematic approach to evaluate the effect of selecting various regulatory guidelines for controlling urban stormwater pollution on the overall discharge of pollutants into waterways. This allows selecting the requirements for capturing runoff volume by BMPs based on the tradeoff between the probability of concentration criteria violation and economic factors.     

Polybrominated diphenyl ethers (PBDEs) and their methoxylated derivatives in pike from Swedish waters with emphasis on temporal trends, 1967-2000

Temporal trends of five tetra- to hexabromodiphenyl ethers [BDE47, BDE99, BDE100, BDE153 and BDE154) and two methoxy-tetraBDEs [6-methoxy-2,2',4,4'- tetraBDE (6-MeO-BDE47) and 2'-methoxy-2,3',4,5'- tetraBDE (2'-MeO-BDE68)] in pike from Lake Bolmen for the years 1967-2000, are presented. All BDE congeners show increasing trends up to the mid-1980s (Sigma5PBDE from 60 to 1600 pg/g wet weight in 1989, i.e. a more than 25-fold increase), and then decrease or level off. The decreasing trends of PBDEs after the 1980s were considerably slower in the present study than was found in a study of an environmental matrix from the Baltic Proper covering the same time period. This difference suggests local sources near Lake Bolmen. The MeO-BDEs show initially decreasing concentrations, which for 6-MeO-BDE47 continues until the early 1990s. The concentrations of 6-MeO-BDE47 in herring from five locations along the Swedish coast increased from south to north in the Baltic Sea. No correlation between the concentrations of the BDE congeners and the MeO-BDEs was observed, indicating sources other than PBDEs for these compounds. The presence of MeO-BDEs in fish from lakes with different characteristics suggests a natural production not favoured by eutrophication, or dependent on sampling season and geographical location.     

A new simple method with high precision for determining the toxicity of antifouling paints on brine shrimp larvae (Artemia): first results

The use of antifouling paints is the only truly effective method for the protection of underwater structures from the development of fouling organisms. In the present study, the surface to volume concept constitutes the basis for the development of a new and improved method for determining the toxicity of antifouling paints on marine organisms. Particular emphasis is placed on the attainment of a standardized uniformity of coated surfaces. Failure to control the thickness of the coat of paint in previous studies of this type, has led to inaccurate evaluation of the relative toxicity of samples. Herein, an attempt is made to solve this problem using a simple technique which gives completely uniform and smooth surfaces. The effectiveness of this technique is assessed through two series of experiments using two different types of test containers: 50 ml modified syringes and 7 ml multiwells. The results of the toxicity experiments follow a normal distribution around the average value which allows to consider these values as reliable for comparison of the level of toxic effect detected with the two types of test containers. The mean lethal concentration L(S/V)(50) in the test series conducted in the multiwells (20.38 mm(2)ml(-1)) does not differ significantly from that obtained in the test series using modified syringes (20.065 mm(2)ml(-1)). It can thus be concluded from this preliminary study that the new method and the two different ways of exposing the test organisms to the antifouling paints and their leachates gave reliable and replicable results.