首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Small hospitals are the grassroots for the big hospital structures, so proper waste management practices require to be initiated from there. Small hospitals contribute a lot in the health care facilities, but due to their poor waste management practices, they pose serious biomedical waste pollution. A survey was conducted with 13 focus questions collected from the 100 hospital present in Dehradun. Greater value of per day per bed waste was found among the small hospitals (178 g compared with 114 g in big hospitals), indicating unskilled waste management practices. Small hospitals do not follow the proper way for taking care of segregation of waste generated in the hospital, and most biomedical wastes were collected without segregation into infectious and noninfectious categories.  相似文献   

2.
In this paper we present a new approach for modeling environmental problem as a bilevel programming problem. To the authors best knowledge, this is the first attempt to use bilivel techniques to tackle such problems. We derive at solution to help decision makers to cope with environmental policy issues. San Francisco, Bay Area is used as a real world example with the solution to their environmental problem.California is presently faced with a serious deficit of solid waste treatment and disposal facilities. Federal legislation has sought to compel the States to assure the capacity to treat and dispose of their own wastes and the California Legislature has enacted laws requiring the counties to initiate programs so that they can treat and dispose of their own wastes. Neither the federal nor the State programs have met with success in California. California continues to ship greater and greater amounts of waste out-of-state, and the majority of California counties have not instituted plans acceptable to the State government regarding the treatment and disposal of their own wastes.In the few cases where sitting and licensing programs have been proposed, the policy-makers charged with their evaluation have proceeded with largely intuitive, non-quantitative evaluation of policy options, often ignoring most of the financial and environmental implication of their decisions.We have developed a strategic management decision model that can evaluate multiple solid waste management options from both economic and environmental standpoints. Examples of problems a quantitative model might evaluate include the economic and environmental impacts of multiple treatment or disposal facilities as opposed to only one site; the environmental impact of taxing dirty waste streams, thus encouraging waste treatment and/or minimization on-site; and the social risk resulting from transportation risks assuming one or more multiple treatment or disposal sites or the use of alternative transportation routes.Because of extensive information presently available for the San Francisco Bay region, we have investigated the regional waste management problem there under several different treatment and disposal scenarios. As appropriate, results from this regional model and from authors earlier work [1] will be applied to California as a whole.  相似文献   

3.
This research had been conducted during year 2012 to review existing data on hospital waste management for some of Khartoum town hospitals and to try to produce appropriate proposals acceptable for waste management and final treatment methods. The overall status of hospital waste management in Khartoum has been assessed through direct visits and designated questionnaires. Eight main hospitals were covered in the study with an overall bed capacity of 2,978. The current waste management practice observed at all studied hospitals was that most of waste, office, general, food, construction debris, and hazardous chemical materials were all mixed together as they are generated, collected, and finally disposed of. Only a small portion of waste in some hospitals (part of potentially infectious, body parts, and sharps) are collected separately and treated in a central incinerator. The estimated value of per bed generation rate in the studied hospitals was found to be 0.87 kg/day, which lies within the range for the low-income countries. In all studied hospitals, it was found that workers were working under very poor unsafe conditions with very low salaries ($35 to $45 per month on average). About 90 % were completely illiterate or had very low education levels. At the national level, no laws considering hospital waste, or even hazardous waste, were found; only some federal general environmental regulations and some procedures from town and city localities for controlling general municipal waste exist. At the hospital level, no policies or rules were found, except in the radiotherapy center, where they manage radioactive wastes under the laws of the Sudanese Atomic Agency. Urgent actions are needed for the remediation and prevention of hazards associated with this type of waste.  相似文献   

4.
5.
Waste disposal was a significant challenge faced by the community and government. Customers buy and use goods that produce a considerable amount of waste. Waste management is a major problem since the number of consumers increased due to high waste generation. This has resulted in a huge amount of waste, which calls for enormous waste-management policies. Reduce; Reuse, Recycle, and Recover are the tools to reduce the adverse implications of retailing and manufacturing on the environment. In this paper, Artificial Intelligence based Hybridized Intelligent Framework (AIHIF) has been proposed for automated recycling to optimizing the waste management process. The system will optimize waste collection with a short distance by utilizing machine learning and graph theory. AI design technology, which helps different approaches adapted to interest groups, collecting their specific information and greatly improving environmental planning and urban management performance, accuracy, and efficiency. The experimental results show that the proposed method enhances performance and accuracy when compared to other existing methods.  相似文献   

6.
The increasing municipal solid waste (MSW) generation along with the high fraction of organic waste and a common disposal of open dumping is the current scenario in many areas in Thailand. As a response to this problem, the country’s Pollution Control Department (PCD) aims to reduce the MSW generation rate to less than 1 kg/capita/day, increase the collection efficiency, and improve the recovery of recyclables. For many years, more than 60% of the solid waste disposal system in Thailand has been carried out by open dumping. According to the survey conducted by this study, in 2004 there were 425 disposal sites (95 landfills; 330 open dumps) in Thailand and an estimated methane emission of 115.4 Gg/year was generated based on this practice. It has been estimated that the anticipated methane emission in Thailand will rise from 115.4 Gg/year to 118.5 Gg/year if the largest open dumpsites in provinces with no existing landfill are upgraded to sanitary landfill; and it will increase to 193.5 Gg/year if the existing sanitary landfill is upgraded to integrated waste management facilities. Moreover, Bangkok metropolitan have the highest methane emission (54.83 Gg/year) among all the regions in Thailand. The methane emission forecast of 339 Gg/year by 2020 (based on LandGEM methodology) provides a stimulus to create a comprehensive plan to capture and utilize methane as an energy source.  相似文献   

7.
简述了城市生活垃圾分类处理的理论原则,对比分析了国内外城市生活垃圾分类处理在法律法规、资金保障措施、垃圾分类收集方式和全民环境意识教育4个方面的做法与特点。提出了健全垃圾分类处理体制机制,推进生产者延伸责任制模式,完善垃圾分类收运体系,提高全民环境意识水平的建议。  相似文献   

8.
Nowadays, in the competitive market, commercial companies due to their economic problems and also restrictions imposed by international organizations to comply with environmental regulations are making noticeable efforts to reduce the level of their wastes in their manufacturing systems and consequently the level of waste in consumers’ products. In harmony with this issue, one of the most effective ways which has successfully been used and proven to be economically profitable is to take products lifecycles into consideration. Consideration of products lifecycle has made supply chain practitioners to investigate the reverse logistics activities in addition to forward logistics activities. Hence, corporations, in order to reduce their cost on the one hand and boosting their efficiency on the other hand, were obligated to employ closed loop supply chain models to concurrently benefit from its economical and environmental advantages. Therefore, in this paper, a mixed nonlinear facility location–allocation model is proposed for recycling collection centers. The considered closed loop logistics model consists of multiple echelons, multiple suppliers, multiple collection centers, multiple time period and also multiple facilities. In real-life problems parameters like demand, cost, capacity, distances, and quantities of returned products are always uncertain. Therefore, in order to solve a realistic problem, foregoing parameters are considered as fuzzy in our proposed model. Subsequently, to solve fuzzy mixed nonlinear programming model, one of the most effective technique in the literature is used. Additionally, in order to demonstrate the behavior of the parameters employed in the model, a comprehensive sensitivity analysis is conducted. Computational results demonstrate that the proposed model can show favorable efficiency in solving supply chain problems.  相似文献   

9.
As one of cities in the developing countries, a rapid population growth and industrial activities pose many environmental challenges for Jimma city, Ethiopia. One aspect of urban growth posing a threat on sustainable development is poor solid waste management, which results in environmental pollution. The purpose of this study is to evaluate the quantity, composition, sources of waste generated, their current disposal practices, and to recommend appropriate management technologies. The total waste generated daily in Jimma city was ca. 88,000 kg, and the average per capita generation rate was 0.55?±?0.17 kg/capita/day. Eighty-seven percent of the waste was produced by households and 13% by institutions, and a negligible fraction (0.1%) was generated by street sweepings. During the rainy season, 40% more waste was generated than in the dry season because of the increased availability of agricultural food product. Further analysis showed that biodegradable organic waste constitutes 54% by weight with an average moisture content of 60% that falls within the required limits for composting. The nonbiodegradable components constitute 46% of which 30% of it was nonrecyclable material. Only 25% of the community uses municipal containers for disposal at the selected landfill site. Fifty-one percent of the households disposed their waste in individually chosen spots, whereas 22% burned their waste. Finally 2% of households use private waste collectors. The socioeconomic analysis showed that higher family income and educational status is associated more with private or municipal waste collection and less with the application of backyard or open dumping. These insights into generated waste and management practice in Jimma city allow making suggestions for improved collection, treatment, and disposal methods. A primary conclusion is that the biodegradable waste is a major fraction having suitable properties for recycling. As such an economic benefit can be obtained from this waste while avoiding the need for disposal.  相似文献   

10.
Reusable products (e.g., packaging) feature a finite lifetime: After a number of trips, if not discarded by the consumer, they are sent for material recycling by the industrial reuser. A method for analytical determination of recycling of no longer reusable products by the industrial reuser is proposed. Industrial reuser recycling is shown to depend nonlinearly on the lifetime and on the reuse retention factor, which is dimensionless and ranges from zero to one. As the retention factor increases, the industrial reuser becomes the main recycler, while recycling from consumer waste recovery disappears and vice versa as the ratio tends to zero. This implies that for highly reusable packaging, post-consumer collection and recycling systems may be unnecessary, and recycling should be credited to the refilling/packaging industry. The total number of reuse trips and the annual reuse frequency have no impact on the industrial reuser recycling level. The results may serve for environmental monitoring of packaging products for apportionment of recycling credit and of reuse/recycling incentives to industry and to post-consumer recycling systems and for planning and sizing of packaging waste recovery facilities (collection, transportation, separation).  相似文献   

11.
This article proposes a new economic efficiency indicator for measuring and analyzing the income opportunities for companies operating in the collection, transport and treatment of municipal solid waste, while also taking into account the environmental perspective. Specifically, the followed approach is based on a mixed economic and environmental perspective, with a focus on the income advantage stemming from the exploitation of secondary raw materials obtained from differentiated waste. To pursue this scope, an indicator at the company level is preliminarily identified; then, a systemic indicator is introduced by implementing an aggregation of the individual ones. The adopted methodological tool is of the rank-size type, which is particularly appropriate for inferring insights at the system level from empirical data at single company level. To validate the indicator and apply it to real data in the sector of interest, an empirical analysis is conducted on a group of Italian waste management companies. It is shown that the indicator can be a useful tool for generating valuable information for waste management companies and policy-makers, who are responsible for defining policies and programs that make the overall waste management system more sustainable, thus materializing environmental and social benefits.  相似文献   

12.
基于GPS、GPRS、GIS地理3G综合技术,设计城市固体废物综合监管系统,实现对固体废物从收集到再利用全过程的监督管理。该系统由申报信息系统、地面控制系统、处置保障系统、综合分析系统、应急指挥系统和线上“淘宝”系统组成,在固体废物收集站点采集的数据上传至综合分析系统,经分析与匹配后相关信息发布在线上“淘宝”交易平台,平台为买卖双方提供资源配置方案,也为管理部门的宏观调控提供数据支撑。  相似文献   

13.
通过对惠州市电子废弃物收集体系组成、去向以及电子废弃物处置方式的调查,分析惠州市电子废弃物收集和处置存在的一系列问题,结合实际提出了城市电子废弃物资源化管理模式的初步构想。  相似文献   

14.
Industrial enterprises constitute a major portion of the world’s economy, as well as a large proportion of a country’s businesses and total employment. In Turkey, industrial enterprises are underdeveloped in terms of knowledge, skill, capital, and particularly accessing and benefiting from the advantages provided by modern information and communication technologies. Aluminum manufacturing has been reported to be the largest industry in Turkey with respect to production volumes and application fields. However, aluminum production is known to be an important contributor to environmental pollution, and the relative contribution of other related enterprises to the total industrial environmental impact is unknown. Environmental pollution sources can typically be classified into three categories: gaseous emissions, solid wastes, and wastewaters. The types of wastes produced by aluminum production vary based on the process line used, the variety of target products produced, and the production capacity of a given plant. As the capacities of facilities grow, the type and amount of waste become more variable. Therefore, the primary objective of this study is to determine the priority of each waste type in aluminum manufacturing industries. This study was conducted in the Industrial Zone of Kayseri in Turkey. Three different facilities that range in size from large to small based on their production volume, plant capacity, and variety of production are selected for this study. The priority of waste types was determined by combining the AHP and PROMETHEE II multicriteria decision methods. While wastewater was categorized as having the highest priority in large facilities, solid waste was determined to be the highest priority in medium and small facilities.  相似文献   

15.
对宁波市7家市属医院废水进行了一年4次的连续监测,发现7家医院废水均严重超标.造成医院废水严重超标的原因有4个方面.同时还探讨了监测规范中存在的三个主要问题,提出了解决办法.文章对南方城市的医院废水监测具有一定的典型性.  相似文献   

16.
在企业污染源现场实现污染物排放浓度水平的快速判定和超标风险筛查,对生态环境管理部门提高执法效率、企业提高环境管理水平意义重大。铅是一种对人体危害极大的有毒重金属,目前缺少含铅废气中铅及其化合物的便携式直读检测设备和检测方法。探索性地将X射线荧光光谱(XRF)法应用于铅蓄电池企业含铅废气中铅及其化合物的便携式快速、直读检测。研究结果表明,基于XRF的面密度法适用于铅蓄电池企业含铅废气处理设施后铅及其化合物的快速、直读检测,相对国标方法具有快速、直读、对样品无损、便于复测等特点,可用于铅及其化合物排放浓度水平的快速判定和超标风险筛查。  相似文献   

17.
农村生活垃圾产生特征及分类收集模式   总被引:7,自引:0,他引:7  
以南京市高淳县的一个村为研究对象,依托新建的农村生活垃圾分类收集系统,对该区域生活垃圾的产生量、组成成分及其动态变化进行了调查研究,从垃圾分类收集模式的运行效果和经济可行性对其进行了分析。结果表明,该地区农村人均垃圾产生量为0.4 kg/d ,但随季节有一定的波动,这主要是由食品类消费的季节性变动而引起。垃圾组成以有机垃圾为主,约占55%,可回收垃圾、其他垃圾和有害垃圾所占比例分别为30.5%、14.2%和0.34%。通过认真的宣传和指导,村民在较短的时间内基本都可以做到正确分类;垃圾分类收集系统的户均建设成本为21元,运行费用比分类收集前每户每月增加3.2元 。  相似文献   

18.
This paper provides an overview of the trend of generation, composition, and management of municipal solid waste, and estimates the carbon emissions arising from municipal solid waste management in Beijing. The correlation analysis conducted shows that the generation of municipal solid waste in Beijing has been growing steadily, showing high correlations (r > 0.9) to the total GDP, per capita income, and the population. Food waste showed an increasing trend since 1990. Compared with the results of an investigation in 1990, ash and woodchips content in 2003 declined from 56% to 17%, while the percentage of paper and plastic increased from 10% to 29% over the same period. The calorific value of the municipal waste also increased, from 2,686 kJ/kg in 1990 to 4,667 kJ/kg in 2003, indicating that the waste is suitable for incineration. Currently, the source separation ratio of municipal waste is approximately 15%. About 94% of all the collected solid waste goes to the landfill while 4% is composted and 2% is incinerated. A moderate garbage collection fee is applied to both permanent and temporary residents in Beijing, but the willingness to pay for solid waste collection and treatment is still low. Under current treatment mode, the total amounts of carbon emission from waste disposal sites and incineration increased with the increase of municipal solid waste, from 29.8 Gg in 1990 to 84.5 Gg in 2003, including 83.3 Gg of CH4 and 22.0 Gg of CO2. The data availability and methodological challenges in monitoring the quantity and characteristics of municipal solid waste are discussed.  相似文献   

19.
The Third Conference of the Parties of the UN-FCCC (CoP-3) held in Kyoto in 1997 defined a Protocol with level of reduction of the Greenhouse Gasses (GHGs) overall emissions for Italy of 6.5% with respect to 1990 emissions. A mathematical model was created in order to evaluate the range of GHGs reduction effects obtained by upgrading waste collection, treatment and disposal system to new Italian regulation. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

20.
An environmental impact assessment (EIA) system was established in 1979 in China. Although EIA was designed as a tool for pollution prevention, in practice it has been based on end-of-pipe (EOP) treatment control since it was first introduced. This approach has ensured an overwhelming focus by enterprises on the use of EOP treatment, rather than pollution prevention, to meet environmental standards, and it has produced a low rate of operation for EOP facilities. The low operation rate for EOP facilities can be traced to the traditional EIA system: it leads project proponents to develop large EOP treatment facilities, but once the main production lines are put into operation, proponents rarely have sufficient funds to operate the treatment facilities. This paper analyzes problems that exist in the EIA system in China, and it describes the Cleaner Production Index and Evaluation System, which is being proposed by environmental authorities in China to evaluate EIA projects based on cleaner production criteria. The paper also suggests how cleaner production analysis can be integrated into the EIA system to improve it.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号