Sorption of copper, zinc and lead on soil mineral phases

Soil mineral phases play a significant role in controlling heavy metal mobility in soils. The effective study of their relation needs the integrated use of several analytical methods. In this study, analytical electron microscopy analyses were combined with sequential chemical extractions on soils spiked with Cu, Zn and Pb. Our aims were to study the metal sorption capacity of soil mineral phases and the effect of presence of iron oxide and carbonate on this property of soil minerals. Copper and Pb were found to be characterized by higher and stronger sorption on the studied samples than Zn. Only the former two metals showed significant differences in their immobilized metal amounts on the studied samples and soil mineral particles. Highest metal amounts were sorbed on the swelling clay mineral particles (smectites and vermiculites), but iron-oxide phases may also have similar lead sorption capacity. Alkaline conditions due to the carbonate content of soils resulted both in increased sorption on the mineral particles for Cu and in enhanced role of precipitation for all the studied metals. On the other hand, the intimate association of phyllosilicates and iron resulted in significant increase in metal sorption capacity of the given particle. The results of sequential extractions could be successfully completed by the analytical electron microscopy analyses for studying the sorption capacity of discrete mineral particles. Their integrated use helps us in better understanding the heavy metal-mineral interactions in soils.     

Earthworms as biological monitors of cadmium, copper, lead and zinc in metalliferous soils

Earthworms (Lumbricus rebellus and Dendrodrilus rubidus) were sampled from one uncontaminated and fifteen metal-contaminated sites. Significant positive correlations were found between the earthworm and 'total' (conc. nitric acid-extractable) soil Cd, Cu, Pb and Zn concentrations (data log1) transformed). The relationships were linear, and the accumulation patterns for both species were similar when a single metal was considered, even though there were species difference in mean metal concentrations. Generally, the earthworm Cd concentration exceeded that of the soil; by contrast, the worm Pb concentration was lower than the soil Pb concentration in all but one (acidic, low soil Ca) site. Our observations suggest that Cu and Zn accumulation may be physiologically regulated by both species. Total-soil Cd explained 82-86% of the variability (V2) in earthworm Cd concentration; 52-58% of worm Pb and worm Zn concentrations were explained by the total-soil concentrations of the respective metals. Total-soil Cu explained only 11-32% of the worm Cu concentration. The effect of soil pH, total Ca concentration, cation-exchange capacity (CEC) and organic carbon on metal accumulation by L. rubellus and D. rubidus was investigated by multiple regression analysis. Soil pH (coupled with CEC) and soil Ca had a major influence on Pb accumulation (V2 of worm Pb increased to 77-83%), and there was some evidence that Cd accumulation may be suppressed in extremely organic soils. The edaphic factors investigated had no effect on Cu or Zn accumulation by earthworms. In the context of biomonitoring, it is proposed that earthworms have a potential in a dual role: (1) as 'quantitative' monitors of total-soil metal concentrations (as shown for Cd); and (2) as estimators of 'ecologically significant' soil metal, integrating the effects of edaphic factors (as shown for Pb).     

Distribution of copper, lead, cadmium and zinc concentrations in soils around Kabwe town in Zambia

The extent of pollution of the environment as a result of mining activities in Kabwe, the provincial capital of Central province in Zambia has not yet been evaluated. Mining of lead and zinc were the core activities of Kabwe mine while cadmium and silver were produced as by-products. The smelting processes produced a significant amount of copper. The spatial distribution of four heavy metals in soils in the northern, eastern, southern and western directions of the mine was analyzed using atomic absorption spectrometry (AAS). Samples were collected up to 20 km in each direction from the mine. Results were consistent with the wind flow patterns in the town. Results ranged between 0.08 and 28 mg kg(-1) (Cd); 0.20 and 0.61 mg kg(-1) (Cu); 0.10 and 758 mg kg(-1) (Pb) and 0.40 and 234 mg kg(-1) (Zn) suggesting high precipitation of metals from the core mining activities. These concentrations were for only the fractions of metals extractable by 0.5M nitric acid and that could be available for plant uptake in the environment. The distribution of metals indicated a decrease of metal concentrations with distance from the mine, which confirmed that precipitation due to mining activities was the main cause of soil contamination.     

Difference of lead,copper and zinc concentrations between interiors and exteriors of peds in some contaminated soils

Solute transport of elements in soils depends on the soil structural and hydraulic properties, and it is controlled by sorption and diffusion, which both limit the mobility and distribution of elements in soils. This study was conducted to compare lead (Pb), copper (Cu) and zinc (Zn) concentrations between ped exteriors and interiors of some contaminated soils. The results show that the differences of the heavy metals between exteriors and interiors decreased in the order clayey soil, clayey loam soil, loam soil. For same soils, the differences decreased from Pb to Cu to Zn. The differences in readily extractable concentrations of the three metals between ped exteriors and interiors were much larger than the differences in their total metals, this may indicate that extractable metals were more recently deposited. The higher Pb and Cu concentrations in the ped exteriors than interiors may additionally be explained by anthropogenic input, movement and downward through preferential flow.     

Multi-generation toxicity of zinc, cadmium, copper and lead to the potworm Enchytraeus albidus

In standard chronic terrestrial toxicity tests with invertebrates, adult organisms are exposed to the contaminants and the number of offspring is quantified. These procedures do not allow the assessment of possible effects on all life stages of the organism, which may lead to an underestimation of the toxicity of the test substance. To evaluate the importance of this issue, the potworm Enchytraeus albidus was exposed to zinc, cadmium, copper and lead for two subsequent generations. Juvenile production was assessed for both generations. Considering the variability of metal toxicity data reported in the literature, it is concluded that the two generation assay did not markedly increase the sensitivity of the standard E. albidus test for the tested metals. Therefore, toxicity data obtained with the proposed test guideline with E. albidus are protective for all life stages.     

Mechanisms of lead, copper, and zinc retention by phosphate rock

The solid-liquid interface reaction between phosphate rock (PR) and metals (Pb, Cu, and Zn) was studied. Phosphate rock has the highest affinity for Pb, followed by Cu and Zn, with sorption capacities of 138, 114, and 83.2 mmol/kg PR, respectively. In the Pb-Cu-Zn ternary system, competitive metal sorption occurred with sorption capacity reduction of 15.2%, 48.3%, and 75.6% for Pb, Cu, and Zn, respectively compared to the mono-metal systems. A fractional factorial design showed the interfering effect in the order of Pb>Cu>Zn. Desorption of Cu and Zn was sensitive to pH change, increasing with pH decline, whereas Pb desorption was decreased with a strongly acidic TCLP extracting solution (pH = 2.93). The greatest stability of Pb retention by PR can be attributed to the formation of insoluble fluoropyromorphite [Pb(10)(PO(4))(6)F(2)], which was primarily responsible for Pb immobilization (up to 78.3%), with less contribution from the surface adsorption or complexation (21.7%), compared to 74.5% for Cu and 95.7% for Zn. Solution pH reduction during metal retention and flow calorimetry analysis both supported the hypothesis of retention of Pb, Cu, and Zn by surface adsorption or complexation. Flow calorimetry indicated that Pb and Cu adsorption onto PR was exothermic, while Zn sorption was endothermic. Our research demonstrated that PR can effectively remove Pb from solutions, even in the presence of other heavy metals (e.g. Cu, Zn).     

Chemical fractionation of copper, lead and zinc in ombrotrophic peat

Measurement of operationally defined chemical fractions in ombrotrophic peat samples provides information not obtained by total metal extractions. Examination of such sequential data permits interpretation of process dynamics. Results for copper, lead and zinc chemical fractionation of peat profiles from Ringinglow Bog, near Sheffield, Great Britain, are reported and discussed. Lead and zinc share similar patterns of partitioning. A considerable proportion of these records is in a form predisposed to transformation and mobilisation. In contrast, much of the copper is comparatively immobile, it being associated with the more chemically intractable fractions. The results suggest that peat copper deposition records may be used for reconstruction of pollution history. The use of lead and zinc records for these purposes is problematic.     

Reactions of compost-derived humic substances with lead, copper, cadmium, and zinc

Thermodynamic stability constants of the formation of complexes from the reactions of humic substances with various metals are usually used as parameters to judge the reactivities of both humic substances and metals. However, in calculating the thermodynamic stability constants, complicated processes for the acquisition of activities of components in reactions are absolutely inevitable. In this study, we investigated the average conditional concentration quotients of the complexes formed from the reaction of metals with humic substances and the relations of these quotients to thermodynamic stability constants. The characterized humic substances including HA (MW>1,000), FA (MW>1,000), and FA (MW<1,000) extracted from a swine compost were prepared to react with Pb, Cu, Cd, and Zn at 25 degrees C and at pH 4.00 and 6.50. Reactions of HA (MW>1,000), FA (MW>1,000), and FA (MW<1,000) with the four metals were carried out at 1:0.1, 1:0.5, 1:1, 1:5, and 1:10 ligand:metal stoichiometry. The concentrations of the free ions of Pb, Cu, Cd, and Zn in the reaction systems of metal-HA suspensions and metal-FA solutions were measured by anodic stripping voltammetry (ASV). The sequence of the average conditional concentration quotients of the formed complexes from the reaction of humic substances with metals was FA(MW<1,000)>FA(MW>1,000)>HA(MW>1,000), showing the relative reactivities of the fractions of swine compost-derived humic substances. The sequence of reacting metals with humic substances was Pb>Cu>Cd>Zn, which is in good agreement with the sequence reported by judging the thermodynamic stability constants. The average conditional concentration quotients of the formed complexes from the reaction of humic substances with metals were thus useful parameters that can be directly related to thermodynamic stability constants and other parameters.     

Comparison of the adsorption of lead,cadmium, copper,zinc and barium to freshwater surface coatings

Measurements were made regarding the adsorption of lead, cadmium, copper, zinc and barium to freshwater surface coatings (biofilms and associated minerals), which were collected in Nanhu Lake in Jilin Province, PR China, in order to investigate the variability of adsorption capacities of these heavy metals mentioned in the above surface coatings. The adsorption of lead and other heavy metals to the biofilms was observed to decrease in the following order: copper, lead, zinc, cadmium, and barium. Generally, the values of Gamma(max) (the maximum adsorption, micromol/m(2)) increased with the standard electrode potential of metal elements used and were recorded as 166.7, 40.0, 29.4, 10.8, and 1.8 for copper, lead, zinc, cadmium and barium, respectively. The values of 1/Gamma(max) increased linearly with the decrease in values of the standard electrode potential of metal elements with a significant correlation (n=5, p=0.01) and increased linearly with the increase in values of covalent radius of metal elements with a significant correlation (n=5, p=0.05). This indicates that standard electrode potential and covalent radius were two of the principal characteristics of metals employed, causing the variation of lead and other heavy metal adsorption to the surface coatings.     

Chelating agent-assisted electrokinetic removal of cadmium, lead and copper from contaminated soils

An integrated experimental program was conducted to remove Cd, Pb and Cu from contaminated soil. The chelate agents nitrilotriacetic acid (NTA), diethylenetriamine pentaacetic acid (DTPA) and ethyleneglycol tetraacetic acid (EGTA) were used as washing solutions under different pH conditions and concentrations. Results showed that the extraction efficiency for Cd in decreasing order was NTA > EGTA > DTPA, while for Pb and Cu it was DTPA > NTA > EGTA. The use of higher chelate concentrations did not necessarily result in greater extraction efficiency. Electrokinetic remediation was applied by conditioning anolyte-catholyte pH to neutral values in order to avoid any potential alterations to the physicochemical soil properties. The removal efficiency for Cd was 65-95%, for Cu 15-60%, but for Pb was less than 20%. The phytotoxicity of the treated soil showed that the soil samples from the anode section were less phytotoxic than the untreated soil, but the phytotoxicity was increased in the samples from the cathode section.     

Response of kidney bean to concentration and chemical form of cadmium, zinc, and lead in polluted soils

Seven soils which had been polluted with heavy metals from a zinc smelter were sequentially extracted so that Cd, Zn, and Pb could be partitioned into five operationally defined geochemical fractions: exchangeable, carbonate, Fe-Mn oxide, organic, and residual fractions. Kidney beans were planted in the soils to examine the effect of concentration and chemical form of the metals in soil on the growth and metal uptake of the plants. The growth of kidney bean was restricted in heavy metal polluted soils compared with controls. Metal concentration and metal uptake by plants were correlated. The highest relationship was found between amount of metal uptake and the metal concentration in exchangeable + carbonate forms. The uptake of metals was according to their solubility sequence, i.e. Cd > Zn > Pb. The uptake rate of exchangeable + carbonate forms was the same for the three elements.     

外源铅在不同类型土壤的形态转化

采用为期60 d的室内培养方法探究南方典型红壤和灰壤中添加高浓度外源铅后Pb稳定化过程。结果表明,加入高浓度外源铅后,土壤有效态Pb含量在培养期内呈现先降低后稳定的趋势,培养30 d后DTPA(二乙烯三胺五乙酸)-Pb浓度基本达到稳定平衡,土壤离子交换态Pb、碳酸盐结合态Pb含量明显降低,形态-BAC风险评价方法表明,供试土壤均能在自然条件下降低铅的生态风险危害,能为修复铅污染土壤工程应用提供科学依据。     

Computational spectroscopic study of copper, cadmium, lead and zinc interactions in the environment

Molecular modelling has been used to investigate the interactions of various heavy metals, in order to understand and possibly to control the nature and behaviour of metals, especially in the aquatic environment. The interactions of copper, cadmium, lead and zinc with organic acids were studied using density functional theory (DFT) calculations. Carboxylic acid was used as a model molecule. The structure of each metal carboxylate was optimized and the vibrational spectrum calculated. The results indicate that there is a shift in the calculated v_S(C=O) of metal carboxylates compared with that of carboxylic acid. It was also found that hexaaqua structures of both cadmium and zinc are stable whereas those of copper and lead are not. Furthermore, dipole moment calculations indicate that cadmium carboxylate dihydrate is more representative of cadmium interactions in the aquatic environment. Moreover, hexaaquo cadmium could further interact with surrounding molecules in the aquatic environment.     

Loading estimates of lead, copper, cadmium, and zinc in urban runoff from specific sources

Urban stormwater runoff is being recognized as a substantial source of pollutants to receiving waters. A number of investigators have found significant levels of metals in runoff from urban areas, especially in highway runoff. As an initiatory study, this work estimates lead, copper, cadmium, and zinc loadings from various sources in a developed area utilizing information available in the literature, in conjunction with controlled experimental and sampling investigations. Specific sources examined include building siding and roofs; automobile brakes, tires, and oil leakage; and wet and dry atmospheric deposition. Important sources identified are building siding for all four metals, vehicle brake emissions for copper and tire wear for zinc. Atmospheric deposition is an important source for cadmium, copper, and lead. Loadings and source distributions depend on building and automobile density assumptions and the type of materials present in the area examined. Identified important sources are targeted for future comprehensive mechanistic studies. Improved information on the metal release and distributions from the specific sources, along with detailed characterization of watershed areas will allow refinements in the predictions.     

Determining the experimental leachability of copper, lead, and zinc in a harbor sediment and modeling

The potential leaching of pollutants present in harbor sediments has to be evaluated in order to choose the best practices for managing them. Little is known about the speciation and mobility of heavy metals in these specific solid materials. The objective of this paper is to determine and model the leachability of copper, lead, and zinc present in harbor sediments in order to obtain essential new data. The mobility of inorganic contaminants in a polluted harbor sediment collected in France was investigated as a function of physicochemical conditions. The investigation relied mainly on the use of leaching tests performed in combination with mineralogical analysis and thermodynamic modeling using PHREEQC. The modeling phase was dedicated to both confirm the hypothesis formulated to explain the experimental results and improve the determination of the main physico-chemical parameters governing mobility. The experimental results and modeling showed that the release of copper, lead, and zinc is very low with deionized water which is due to the stability of the associated solid phases (organic matter, carbonate minerals, and/or iron sulfides) at natural slightly basic conditions. However, increased mobilization is observed under pH values below 6.0 and above 10.0. This methodology helped to consistently obtain the geochemical parameters governing the mobility of the contaminants studied.     

Effects of chronic exposure to lead,copper, zinc,and cadmium on biomarkers of the European eel,Anguilla anguilla

Exposure to specific metallic compounds can cause severe deleterious modifications in organisms. Fishes are particularly prone to toxic effects from exposure to metallic compounds via their environment. Species that inhabit estuaries or freshwater environments can be chronically affected by persistent exposure to a large number of metallic compounds, particularly those released by industrial activities. In this study, we exposed yellow eels (European eel, Anguilla anguilla) for 28 days to environmentally relevant concentrations of four specific metals; lead (300, 600, and 1,200 μg/l), copper (40, 120, and 360 μg/l), zinc (30, 60, and 120 μg/l) and cadmium (50, 150, and 450 μg/l). The selected endpoints to assess the toxicological effects were neurotransmission (cholinesterasic activity in nervous tissue), antioxidant defense, and phase II metabolism (glutathione-S-transferase [GST] activity, in both gills and liver tissues), and peroxidative damage. The results showed an overall lack of effects on acetylcholinesterase for all tested metals. Lead, copper, and cadmium exposure caused a significant, dose-dependent, increase in GST activity in gill tissue. However, liver GST only significantly increased following zinc exposure. No statistically significant effects were observed for the thiobarbituric acid reactive substances assay, indicating the absence of peroxidative damage. These findings suggest that, despite the occurrence of an oxidative-based response after exposure to lead, copper, and cadmium, this had no consequence in terms of peroxidative membrane damage; furthermore, cholinergic neurotoxicity caused by lead, copper, and cadmium did not occur. The implications of these results are further discussed.     

Clonal differences in copper and zinc tolerance of birch in metal-supplemented soils

Metal tolerance of a range of birch clones (Betula pendula and Betula pubescens) originating from metal-contaminated sites in England, Wales, Belgium and Finland were tested in soils supplemented with several concentrations of copper (Cu) or zinc (Zn) (500, 2000, 5000 mg kg-1 dry wt. soil of CuSO(4).5H2O or ZnSO(4).7H2O) for 4 months and with sub-toxic metal supplements (500 mg CuSO4, 2000 mg ZnSO4) for 6 months. When grown at high concentrations of metals, severe toxicity symptoms (growth inhibition, chlorosis, necrosis) and clear evidence for differences in tolerance to this toxicity were found in a subset of the clones. When all clones were grown at a much lower, sub-toxic level of metal, again significant differences could be found between some of the clones. Clones derived from the same population varied greatly in their tolerance. However, the overall pattern of metal specificity varied in agreement with the type of soil contamination at the site of origin. The growth of the clones from Harjavalta Cu/nickel smelter area was 19% better in Cu than in Zn-supplemented soil, on average. The growth of clones from Maatheide Zn smelter are was 19% poorer in Cu- than in Zn-supplemented soil. Sensitive clones accumulated more Cu and Zn to the above-ground parts. Some birch clones were able to survive at about 20-fold higher than typical total background Cu or Zn concentrations, whereas most clones were able to grow without serious toxic symptoms at about 10-fold concentrations.     

Accumulation and fractionation of copper, iron, manganese, and zinc in calcareous soils amended with composts.

Amending soils with compost may lead to accumulation of metals and their fractions at various concentrations in the soil profile. The objectives of this study were to determine 1) the accumulation of Cu, Fe, Mn, and Zn with depth and 2) the distribution of water soluble, exchangeable, carbonate, Fe-Mn oxides, organic and residual forms of each metal in soils amended with MSW compost, co-compost, biosolids compost and inorganic fertilizer (as control). Total concentrations of Cu, Fe, Mn and Zn were concentrated in the 0-22 cm soil layer and scant in the rock layer. These metals were in the decreasing order of Fe > Mn > Zn > or = Cu. Copper, Fe, and Zn were predominantly in the residual form followed by fractions associated with Fe-Mn oxides, carbonate, organic, exchangeable and water soluble in all treatments except MSW compost amended soil where the organic fraction was higher than the carbonate fraction. In fertilizer, co-compost and biosolids compost treated soils Mn concentrated mainly in the Fe-Mn oxides form followed by residual, carbonate, and organic forms whereas, in MSW compost treated soil the same pattern occurred except that Mn organic fraction was higher than that in the carbonate form. The MSW compost has a greater potential to be used as a soil amendment to supply plants with Cu, Mn and Zn than other treatments in calcareous soils of south Florida.