Synthesis and characterisation of Pd-modified N-doped TiO2 for photocatalytic degradation of natural organic matter (NOM) fractions

Introduction

The removal of natural organic matter (NOM) from water is becoming increasingly important in order to prevent the formation of carcinogenic disinfection by-products. The inadequate removal of NOM has a bearing on the capacity of the other treatment processes to remove organic micro-pollutants or inorganic species that may be present in the water. New methods are therefore currently being sought to effectively characterise NOM and also to ensure that it is sufficiently removed from drinking water sources.

Methodology

Nitrogen- and palladium-co-doped TiO₂ was synthesised by a modified sol?Cgel method and evaluated for its photocatalytic degradation activity on NOM fractions under simulated solar radiation. The photocatalyst was characterised by FT-IR, Raman, XRD, DRUV?Cvis, SEM, TEM, EDS, XPS and TGA. FT-IR confirmed the presence of OH groups on thermally stable, nearly spherical anatase nanoparticles with an average diameter of 20?nm. PdO species appeared on the surface of the TiO₂ as small uniformly dispersed particles (2 to 3?nm). A red shift in the absorption edge compared to commercial anatase TiO₂ was confirmed by DRUV?Cvis. In order to gain a better insight into the response of NOM to photodegradation, the NOM was divided into three different fractions based on its chemical nature.

Results and discussion

Photodegradation efficiencies of 96, 38 and 15?% were realised for the hydrophobic, hydrophilic and transphilic NOM fractions, respectively. A reasonable mechanism was proposed to explain the photocatalytic degradation of the NOM fractions. The high photocatalytic activity could be attributed to the larger surface area, smaller crystalline size and synergistic effects of the co-dopants N and Pd in the TiO₂ crystal.     

In situ photoelectrochemical/photocatalytic study of a dye discoloration in a microreactor system using TiO2 thin films

Introduction

In this work, we report in situ studies of UV photoelectrocatalytic discoloration of a dye (indigo carmine) by a TiO₂ thin film in a microreactor to demonstrate the driving force of the applied electrode potential and the dye flow rate toward dye discoloration kinetics.

Methods

TiO₂ 65-nm-thick thin films were deposited by PVD magnetron sputtering technique on a conducting glass substrate of fluorinated tin oxide. A microreactor to measure the discoloration rate, the electrode potential, and the photocurrent in situ, was developed. The dye solutions, before and after measurements in the microreactor, were analyzed by Raman spectroscopy.

Results

The annealed TiO₂ thin films had anatase structure with preferential orientation (101). The discoloration rate of the dye increased with the applied potential to TiO₂ electrode. Further, acceleration of the photocatalytic reaction was achieved by utilizing dye flow recirculation to the microreactor. In both cases the photoelectrochemical/photocatalytic discoloration kinetics of the dye follows the Langmuir?CHinshelwood model, with first-order kinetics.

Conclusions

The feasibility of dye discoloration on TiO₂ thin film electrodes, prepared by magnetron sputtering using a flow microreactor system, has been clearly demonstrated. The discoloration rate is enhanced by applying a positive potential (E _AP) and/or increasing the flow rate. The fastest discoloration and shortest irradiation time (50?min) produced 80% discoloration with an external anodic potential of 0.931?V and a flow rate of 12.2?mL?min^?1.     

Effect of particle size of titanium dioxide nanoparticle aggregates on the degradation of one azo dye

Introduction

Titanium dioxide (TiO₂) nanoparticle powders have been extensively studied to quickly photodegrade some organic pollutants; however, the effect of the particle size of TiO₂ nanoparticle aggregates on degradation remains unclear because microscale aggregates form once the nanoparticle powders enter into water.

Methods

The degradation of azo dye by different particle sizes of TiO₂ nanoparticle aggregates controlled by NaCl concentrations was investigated to evaluate the particle size effect. Removal reactions of reactive black 5 (RB5) with TiO₂ nanoparticles followed pseudo-first-order kinetics.

Results

The increase of TiO₂ dosage from 40 to 70?mg/L enhanced the degradation. At doses around 100?mg/L TiO₂, degradation rates decreased which could be the result of poor UV light transmittance at high-particle concentrations. At average particle sizes of TiO₂ nanopowders less than around 500?nm, the degradation rates increased with decreasing particle size. As the average particle size exceeded 500?nm, the degradation rates were not significantly changed.

Conclusions

For the complete degradation experiments, the mineralization rates of total organic carbon disappearance are generally following the RB5 decolorization kinetic trend. These findings can facilitate the application of TiO₂ nanoparticles to the design of photodegradation treatments for wastewater.     

Photocatalytic behavior of nanosized TiO2 immobilized on layered double hydroxides by delamination/restacking process

Introduction

Efficient immobilization of TiO₂ nanoparticles on the surface of Mg₂Al-LDH nanosheets was performed by delamination/restacking process.

Experimental part

The structural and textural properties of as-prepared nanocomposite were deeply analyzed using different solid-state characterization techniques such as: X-ray powder diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopies, chemical analysis, X-ray photoelecton spectroscopy, N₂ adsorption?Cdesorption, and electronic microscopy.

Results and discussion

The photocatalytic properties of immobilized TiO₂ nanoparticles on Mg₂Al were investigated using the photodegradation of two model pollutants: Orange II and 4-chlorophenol, and compared with pure colloidal TiO₂ solution.

Conclusion

It appears that Orange II photodegradation was systematically faster and more efficient than 4-chlorophenol photodegradation regardless of the medium pH. Moreover under slightly basic conditions, even if the TiO₂ photocatalytic efficiency decreases, photodegradation performed in presence of easily recovered TiO₂/Mg₂Al_1.5 nanocomposite gives rise to comparable or better results than pure TiO₂.     

The influence of hydroxyl volatile organic compounds on the oxidation of aqueous sulfur dioxide by oxygen

Although the effect of volatile organic compounds (VOCs) on the oxidation of dissolved sulfur dioxide by oxygen has been the subject of many investigations, this is the first study which examines the effect of a large number of precisely 16 hydroxy compounds. The kinetics both in the absence and the presence of VOCs was defined by rate laws (A and B): A $$ \hbox{-} \mathrm{d}\left[\mathrm{S}\left(\mathrm{IV}\right)\right]/\mathrm{dt}={R}_o={k}_o\left[\mathrm{S}\left(\mathrm{IV}\right)\right] $$ B $$ \hbox{-} \mathrm{d}\left[\mathrm{S}\left(\mathrm{IV}\right)\right]/\mathrm{dt}={R}_i={k}_i\left[\mathrm{S}\left(\mathrm{IV}\right)\right] $$ where R _o and k _o are the initial rate and first-order rate constant, respectively, in the absence of VOCs, R _i , and k _i are the initial rate and the first-order rate constant, respectively, in the presence of VOCs, and [S(IV)] is the concentration of dissolved sulfur dioxide, sulfur(IV). The nature of the dependence of k _i on the concentration of inhibitor, [Inh], was defined by Eq. (C). C $$ {k}_i={k}_0/\left(1+B\left[\mathrm{Inh}\right]\right) $$ where B is an empirical inhibition parameter. The values of B have been determined from the plots of 1/k _i versus [Inh]. Among aliphatic and aromatic hydroxy compounds studied, t-butyl alcohol and pinacol were without any inhibition effect due to the absence of secondary or tertiary hydrogen. The values of inhibition parameter, B, were related to k _inh , the rate constant for the reaction of SO₄ ^? radical with the inhibitor, by Eq. (D). D $$ B=\left(9\pm 2\right)\times 1{0}^{-4}\times {k}_{inh} $$ Equation (D) may be used to calculate the values of either of B or k _inh provided that the other is known. The extent of inhibition depends on the value of the composite term, B[Inh]. However, in accordance with Eq. (C), the extent of inhibition would be sizeable and measurable when B[Inh]?>?0.1 and oxidation of S(IV) would be almost completely stopped when B[Inh]?≥?10. B[Inh] value can be used as a guide whether the reaction step: SO₄ ^??+?organics? \( \overset{k_{inh}}{\to } \) ?SO₄ ^2??+?non-chain products: should be included in the multiphase models or not.     

Comparison of methods for evaluation of activity of photocatalytic films

Objective

This work aims to investigate the correlation between the photocatalytic activity determined by methylene blue bleaching (DIN 52980), stearic acid degradation, and degradation of acetone in gas phase.

Method

The photocatalytic TiO₂ coatings included in this investigation ranged from thin commercially available coatings (Activ^TM and BioClean^TM) and ready to use suspensions (Nano-X PK1245) to lab-produced PVD and sol?Cgel coatings. XRD analysis of the photocatalytic coatings showed that all the coatings consisted of nanocrystalline anatase, although the thickness and porosity varied considerably.

Results

The study showed that the reproducibility of the activity measurements was good. However, more importantly, the investigation showed that there is a good correlation between the activities determined by the different methods even though the characteristics of the photocatalytic coatings and the organic probe molecules varied considerably.

Conclusion

The overall findings of this work suggest that there is a good correlation between the investigated methods. These results are promising for the future work concerning standardization of methods for determination of the activity of photocatalytic films.     

Transport and degradation of propylene glycol in the vadose zone: model development and sensitivity analysis

Transport and degradation of de-icing chemical (containing propylene glycol, PG) in the vadose zone were studied with a lysimeter experiment and a model, in which transient water flow, kinetic degradation of PG and soil chemistry were combined. The lysimeter experiment indicated that aerobic as well as anaerobic degradation occurs in the vadose zone. Therefore, the model included both types of degradation, which was made possible by assuming advection-controlled (mobile) and diffusion-controlled (immobile) zones. In the mobile zone, oxygen can be transported by diffusion in the gas phase. The immobile zone is always water-saturated, and oxygen only diffuses slowly in the water phase. Therefore, the model is designed in a way that the redox potential can decrease when PG is degraded, and thus, anaerobic degradation can occur. In our model, manganese oxide (MnO₂, which is present in the soil) and NO \(_{3}^{-}\) (applied to enhance biodegradation) can be used as electron acceptors for anaerobic degradation. The application of NO \(_{3}^{-}\) does not result in a lower leaching of PG nor in a slower depletion of MnO₂. The thickness of the snowcover influences the leached fraction of PG, as with a high infiltration rate, transport is fast, there is less time for degradation and thus more PG will leach. The model showed that, in this soil, the effect of the water flow dominates over the effect of the degradation parameters on the leaching at a 1-m depth.     

Characterization of PM10 atmospheric aerosol at urban and urban background sites in Fuzhou city, China

Background

PM₁₀ aerosol samples were simultaneously collected at two urban and one urban background sites in Fuzhou city during two sampling campaigns in summer and winter. PM₁₀ mass concentrations and chemical compositions were determined.

Methods

Water-soluble inorganic ions (Cl^?, NO ₃ ^? , SO ₄ ^2? , NH ₄ ⁺ , K⁺, Na⁺, Ca²⁺, and Mg²⁺), carbonaceous species (elemental carbon and organic carbon), and elements (Al, Si, Mg, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, and Pb) were detected using ion chromatography, thermal/optical reflectance, and proton-induced X-ray emission methods, respectively.

Results

PM₁₀ mass concentrations, as well as most of the chemical components, were significantly increased from urban background to urban sites, which were due to enhanced anthropogenic activities in urban areas. Elements, carbonaceous species, and most of the ions were more uniformly distributed at different types of sites in winter, whereas secondary ion SO ₄ ^2? , NO ₃ ^? , and NH ₄ ⁺ showed more evident urban-background contrast in this season. The chemical mass closure indicated that mineral dust, organic matters, and sulfate were the most abundant components in PM₁₀. The sum of individually measured components accounted for 86.9?C97.7% of the total measured PM₁₀ concentration, and the discrepancy was larger in urban area than in urban background area.

Conclusion

According to the principal component analysis?Cmultivariate linear regression model, mineral dust, secondary inorganic ions, sea salt, and motor vehicle were mainly responsible for the PM₁₀ particles in Fuzhou atmosphere, and contributed 19.9%, 53.3%, 21.3%, and 5.5% of PM₁₀, respectively.     

Superior photodecomposition of pyrene by metal ion-loaded TiO2 catalyst under UV light irradiation

Background

The photocatalytic degradation of pyrene under UV (125?W Hg-Arc, 10.4?mW/cm²) irradiation of TiO₂ aqueous suspension has been found to be highly improved with the dissolved transition metal ions like Cu²⁺, Fe³⁺, Ag⁺, and Au³⁺, etc. As the reduction potential of these metals lies below the conduction band (CB) position (?0.1?eV) of TiO₂, the photoexcited electron transfer occurs more readily and reduces electron?Chole recombination rate. Therefore, it has a beneficial influence on the photocatalytic ability of TiO₂ because of rapid Fermi energy equilibrium between the CB of TiO₂ and its surface adsorbed metal ions.

Results and discussion

The Fermi level is referred to as the electrochemical potential and plays an important role in the band theory of solids. When metal and semiconductor are in contact, electron migration from photoirradiated semiconductor to the deposited metal occurs at the interface until two Fermi levels equilibrate and enhanced the photocatalytic activity of semiconductor photocatalyst. Ni²⁺ having more negative reduction potential (?0.25?eV) than the CB of TiO₂ imparts negligible co-catalytic activity to TiO₂ photoreaction. It also revealed that loading of Au³⁺ ions displayed higher degradation rate of pyrene than Au photodeposition. Furthermore, when the amount of dissolved Fe⁺³ and Au³⁺ ions gradually increases from 0.1 to 2?wt.%, the pyrene photodecomposition rate also become faster.     

Photocatalytic degradation of methyl orange by a multi-layer rotating disk reactor

Introduction

Solar wastewater treatment based on photocatalytic reactions is a green process that utilizes renewable energy resources and minimizes secondary pollution. Reactor design plays an important role in promoting treatment efficiency and throughput density (based on unit volume of the reactor).

Experimental

A rotating disk reactor that significantly increases the process efficiency has been designed and evaluated for application to photocatalytic decomposition of dye pollutants in aqueous solutions. In this process, a novel multi-layer rotating disk reactor (MLRDR) was presented. Photocatalyst (TiO₂) particles are immobilized on the surfaces of disks. Within each layer of the reactor, methyl orange aqueous solution is allowed to flow from the center of the disk in a radial direction along the surface of the disk, which is rotating at high speed and is irradiated with UV lamps. The effluent is then directed to the center of another layer that lies underneath. Up to four stacked layers have been tested in this study, and the effects due to the number of the layers and volumetric flow rate on reaction conversion are investigated.

Results and discussion

The efficiency of this photocatalytic reactor exhibits complex dependence on these parameters. With selected operating conditions, conversions greater than 95% can be achieved within seconds of residence time. Design equations of the reactor have been derived based on fluid dynamics and kinetic models, and the simulation results show promising scale-up potential of the reactor.     

Microbial structure and chemical components of aerosols caused by rotating brushes in a wastewater treatment plant

Purpose

Bacterial community structure and the chemical components in aerosols caused by rotating brushes in an Orbal oxidation ditch were assessed in a Beijing municipal wastewater treatment plant.

Methods

Air samples were collected at different distances from the aerosol-generating rotating brushes. Molecular culture-independent methods were used to characterize the community structure of the airborne bacteria in each sample regardless of cell culturability. A clone library of 16S rDNA directly amplified from air DNA of each sample was constructed and sequenced to analyze the community composition and diversity. Insoluble particles and water-soluble ions emitted with microorganisms in aerosols were analysis by a scanning electron microscope together with energy dispersive X-ray spectroscopy and ion chromatogram analyzer.

Results

In total, most of the identified bacteria were Proteobacteria. The majority of sequences near the rotating brushes (the main source of the bioaerosols) were Proteobacteria (62.97 %) with ??-(18.52 %) and ??-(44.45?%) subgroups and Bacteroidetes (29.63 %). Complex patterns were observed for each sampling location, suggesting a highly diverse community structure, comparable to that found in water in the Orbal oxidation ditch. Accompany with microorganisms, 46.36???g/m³ of SO ₄ ^2? , 29.35???g/m³ of Cl^?, 21.51???g/m³ of NO ₃ ^? , 19.76???g/m³ of NH ₄ ⁺ , 11.42???g/m³ of PO ₄ ^3? , 6.18???g/m³ of NO ₂ ^? , and elements of Mg, Cl, K, Na, Fe, S, and P were detected from the air near the aerosols source.

Conclusions

Differences in the structure of the bacterial communities and chemical components in the aerosols observed between sampling sites indicated important site-related variability. The composition of microorganisms in water was one of the most important sources of bacterial communities in bioaerosols. Chemical components in bioaerosols may provide a media for airborne microorganism attachment, as well as a suitable microenvironment for their growth and survival in the air. This study will be benefit for the formulation of pollution standards, especially for aerosols, that take into account plant workers?? health.     

Diphenyl diselenide attenuates hepatic and hematologic toxicity induced by chlorpyrifos acute exposure in rats

Purpose

In this study, we investigated the effect of diphenyl diselenide [(PhSe)₂] on chlorpyrifos (CPF)-induced hepatic and hematologic toxicity in rats.

Methods

Rats were pre-treated with (PhSe)₂ (5?mg/kg) via the oral route (oral gavage) once a day for 7?days. On the eighth and ninth days, rats were treated with (PhSe)₂ (5?mg/kg) 30?min prior to CPF (50?mg/kg, by subcutaneous route). The aspartate aminotransferase, alanine aminotransferase, and lactate dehydrogenase activities were determined in plasma of rats. Lipid peroxidation, protein carbonyl, and non-protein thiol levels as well as catalase, superoxide dismutase, glutathione peroxidase, glutathione reductase, and gluthatione S-transferase activities were determined in livers of rats. Hematological parameters were also determined.

Results

The results showed that CPF caused hepatic oxidative damage, as demonstrated by an increase in lipid peroxidation and protein carbonyl levels which was associated with a decrease in antioxidant defenses. CPF exposure caused a reduction in the leukocyte, indicating hematologic toxicity. (PhSe)₂ was effective in attenuating these toxic effects caused by CPF exposure in rats.

Conclusions

The results indicated that (PhSe)₂ was effective in protecting the hepatic and hematologic toxicity induced by acute CPF exposure in rats.     

On the way to the creation of next generation photoactive materials

Introduction

Transition from first- to second-generation photocatalysts has followed the notion that greater absorption of light in the visible region would yield greater spectral sensitivity and greater photoactivity. Though a promising strategy, in practice, it did not meet expectation because of various side issues, which in many cases has led to loss of photoactivity and chemical reactivity. This article examines some earlier notions that arose from applications of different metal oxides (e.g., TiO₂, ZnO, MgO among others) that made these oxides good photocatalysts in many processes.

Discussion

Phenomena that proved relevant in developing next generation photoactive materials are considered: the dependence of the activity of photocatalysts on the band gap energy, the spectral variations of the activity of photoactive materials, and the spectral variations of selectivity of photoactive materials. The tendency to decrease the energy of actinic photons through doping in forming second-generation photocatalysts is completely opposite the fundamental observation in first-generation photocatalysts whereby the activity increased with increasing band gap energy. Extension of spectral sensitivity of second-generation photoactive materials also caused a decrease of their photoactivity; hence, some notions are reconsidered to produce next(third) generation photoactive materials.

Summary

The article proposes the following concepts to develop next generation photocatalysts: (1) multi(two)-photon excitation of photoactive materials with lower energy photons to achieve the same excited state as with higher energy photons, (2) utilization of heterojunctions to drive electronic processes in the desired direction, and (3) selective photoexcitation of localized electronic states to gain better selectivity.     

Interpretation of ground-level ozone episodes with atmospheric stability index measurement

Purpose

This paper presents a novel approach to interpret ground-level O₃ with the measured atmospheric stability index (ASI).

Methods

O₃ concentrations were monitored by automatic analysers at three types of stations: traffic site, residential site and regional background site in 2005, and the ASI was simultaneously measured by observing radon and its short-lived decay products.

Results

The observed results showed a clear annual variation of O₃ concentrations with a maximum in spring, relatively high at the regional background site over 120?ppb, and lower at the residential and traffic sites at about 70?ppb. ASI gives information about the dilution properties of the lower boundary layer and allows to highlight the relevant role of the dilution factor in determining atmospheric pollution events. We demonstrated the analysis of O₃ night peak episodes with vertical wind and ASI.

Conclusions

With the advantage of ASI and vertical wind profiles, it was possible to isolate particular photochemical pollution phenomena of O₃ peaks from the free troposphere reservoir or formed by local reactions. This shows that the index constitutes a powerful and valuable tool for describing O₃ night-peak episodes at background station.     

Trace metals, anions and polybromodiphenyl ethers in settled indoor dust and their association

Contaminants in settled indoor dust are potentially health hazardous to human. Thus, identification and quantification of toxic chemicals in settled indoor dust is of great concern. In this study, the levels of major anions ( $ \mathrm{C}{{\mathrm{l}}^{-}},\mathrm{N}{{\mathrm{O}}_2}^{-},\mathrm{B}{{\mathrm{r}}^{-}},\mathrm{N}{{\mathrm{O}}_3}^{-},\mathrm{P}{{\mathrm{O}}_4}^{3-}\,\mathrm{and}\,\mathrm{S}{{\mathrm{O}}_4}^{2- } $ ), trace metals (Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, As and Pb) and polybromodiphenyl ethers (PBDEs) in settled office and home dust were determined and correlations between the contaminants investigated. Depending on the available materials in both microenvironments, the most possible sources were identified. The results showed that the settled office dusts (n?=?6 pooled samples from 85 offices) were more contaminated than home dusts (n?=?8 homes). For anions, $ \mathrm{S}{{\mathrm{O}}_4}^{2- } $ and Cl^– accounted for 87 and 97 % of the total office and home dust contaminants, respectively. For trace metals, Fe, Cu, Zn and Mn, accounted for 98 % of the contaminants in both office and home dust samples. Fe exhibited the highest percentage of 76.7 and 87.3 % in office and home dust samples, respectively. For PBDEs, the mean concentrations detected in office and home dust ranged between 5.8–86.3 and 1.5–20.6 ng?g^?1, respectively. The log-transformed correlation between the total concentrations of trace metals and major anions detected in offices and homes was positive for offices and negative for homes with a statistically significant values (r?=?0.73, p?<?0.01; r?= ?0.22, p?<?0.01, respectively). The daily exposure rates determined for the most hazardous such as As, Cd, Pb and PBDEs congeners, relative to the individual concentrations reported in the literature in settled indoor dust, were found very lower. Therefore, maybe it is possible to expect less potential health risk. Investigation of formation of coordination compounds between trace metals and PBDEs congeners is possible; however, this requires further study.     

Evaluation of environmental impact produced by different economic activities with the global pollution index

Introduction

The paper analyses the environment pollution state in different case studies of economic activities (i.e. co-generation electric and thermal power production, iron profile manufacturing, cement processing, waste landfilling, and wood furniture manufacturing), evaluating mainly the environmental cumulative impacts (e.g. cumulative impact against the health of the environment and different life forms).

Materials and methods

The status of the environment (air, water resources, soil, and noise) is analysed with respect to discharges such as gaseous discharges in the air, final effluents discharged in natural receiving basins or sewerage system, and discharges onto the soil together with the principal pollutants expressed by different environmental indicators corresponding to each specific productive activity. The alternative methodology of global pollution index (I _GP ^* ) for quantification of environmental impacts is applied.

Results and discussion

Environmental data analysis permits the identification of potential impact, prediction of significant impact, and evaluation of cumulative impact on a commensurate scale by evaluation scores (ES_i) for discharge quality, and global effect to the environment pollution state by calculation of the global pollution index (I _GP ^* ).

Conclusions

The I _GP ^* values for each productive unit (i.e. 1.664?C2.414) correspond to an ??environment modified by industrial/economic activity within admissible limits, having potential of generating discomfort effects??. The evaluation results are significant in view of future development of each productive unit and sustain the economic production in terms of environment protection with respect to a preventive environment protection scheme and continuous measures of pollution control.     

Adsorption of Remazol Red 198 onto magnetic N-lauryl chitosan particles: equilibrium, kinetics, reuse and factorial design

Purpose

The discharge of colored effluents from industries is an important environmental issue and it is indispensable to remove the dyes before the water gets back to the rivers. The magnetic adsorbents present the advantage of being easily separated from the aqueous system after adsorption by positioning an external magnetic field.

Methods

Magnetic N-lauryl chitosan (L-Cht/??-Fe₂O₃) particles were prepared and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, transmission electron microscopy, and vibrating sample magnetometry. Remazol Red 198 (RR198) was used as a reactive dye model for adsorption on L-Cht/??-Fe₂O₃. The adsorption isotherms were performed at 25°C, 35°C, 45°C, and 55°C and the process was optimized using a 2³ factorial design (analyzed factors: pH, ionic strength, and temperature). The desorption and regeneration studies were performed in a three times cycle.

Results

The characterization of the material indicated that the magnetic particles were introduced into the polymeric matrix. The pseudo-second order was the best model for explaining the kinetics and the Langmuir?CFreundlich was the best-fitted isotherm model. At room temperature, the maximum adsorption capacity was 267?mg?g^?1. The material can be reused, but with a decrease in the amount of adsorbed dye.

Conclusions

L-Cht/??-Fe₂O₃ is a promising material to remove RR198 and probably other similar reactive dyes from aqueous effluents.     

Visible light photocatalytic antibacterial activity of Ni-doped and N-doped TiO<Subscript>2</Subscript> on <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> and <Emphasis Type="Italic">Escherichia coli</Emphasis> bacteria

The Ni-doped and N-doped TiO₂ nanoparticles were investigated for their antibacterial activities on Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacteria. Their morphological features and characteristics such as particle size, surface area, and visible light absorbing capacity were compared and discussed. Scanning electron microscopy, X-ray diffraction, and UV–visible spectrophotometry were used to characterize both materials. The inactivation of E. coli (as an example of Gram-negative bacteria) and S. aureus (as an example of Gram-positive bacteria) with Ni-doped and N-doped TiO₂ was investigated in the absence and presence of visible light. Antibacterial activity tests were conducted using undoped, Ni-doped, and N-doped TiO₂. The N-doped TiO₂ nanoparticles show higher antibacterial activity than Ni-doped TiO₂. The band gap narrowing of N-doped TiO₂ can induce more visible light absorption and leads to the superb antibacterial properties of this material. The complete inactivation time for E. coli at an initial cell concentration of 2.7?×?10⁴ CFU/mL was 420 min which is longer than the 360 min required for S. aureus inactivation. The rate of inactivation of S. aureus using the doped TiO₂ nanoparticles in the presence of visible light is greater than that of E. coli. The median lethal dose (LD50) values of S. aureus and E. coli by antibacterial activity under an 18-W visible light intensity were 80 and 350 mg/ml for N-doped TiO₂, respectively.     

An integrated approach to identify the origin of PM10 exceedances

Purpose

This study was aimed to the development of an integrated approach for the characterization of particulate matter (PM) pollution events in the South of Italy.

Methods

PM₁₀ and PM_2.5 daily samples were collected from June to November 2008 at an urban background site located in Bari (Puglia Region, South of Italy). Meteorological data, particle size distributions and atmospheric dispersion conditions were also monitored in order to provide information concerning the different features of PM sources.

Results

The collected data allowed suggesting four indicators to characterize different PM₁₀ exceedances. PM_2.5/PM₁₀ ratio, natural radioactivity, aerosol maps and back-trajectory analysis and particle distributions were considered in order to evaluate the contribution of local anthropogenic sources and to determine the different origins of intrusive air mass coming from long-range transport, such as African dust outbreaks and aerosol particles from Central and Eastern Europe. The obtained results were confirmed by applying principal component analysis to the number particle concentration dataset and by the chemical characterization of the samples (PM₁₀ and PM_2.5).

Conclusions

The integrated approach for PM study suggested in this paper can be useful to support the air quality managers for the development of cost-effective control strategies and the application of more suitable risk management approaches.     

Removal of faecal indicator pathogens from waters and wastewaters by photoelectrocatalytic oxidation on TiO2/Ti films under simulated solar radiation

Purpose

The disinfection efficiency of water and secondary treated wastewater by means of photoelectrocatalytic oxidation (PEC) using reference strains of Enterococcus faecalis and Escherichia coli as faecal indicators was evaluated. Operating parameters such as applied potential (2?C10?V), initial bacterial concentration (10³?C10⁷?CFU/mL), treatment time (up to 90?min) and aqueous matrix (pure water and treated effluent) were assessed concerning their impact on disinfection.

Methods

PEC experiments were carried out using a TiO₂/Ti film anode and a zirconium cathode in the presence of simulated solar radiation. Bacterial inactivation was monitored by the culture method and real-time SYBR green PCR.

Results

A 6.2 log reduction in E. faecalis population was achieved after 15?min of PEC treatment in water at 10?V of applied potential and an initial concentration of 10⁷?CFU/mL; pure photocatalysis (PC) led to only about 4.3 log reduction, whilst negligible inactivation was recorded when the respective electrochemical oxidation process was applied (i.e. without radiation). PEC efficiency was generally improved increasing the applied potential and decreasing initial bacterial concentration. Regarding real wastewater, E. coli was more susceptible than E. faecalis during treatment at a potential of 5?V. Wastewater disinfection was affected by its complex composition and the contained mixed bacterial populations, yielding lower inactivation rates compared to water treatment. Screening the results obtained from both applied techniques (culture method and real-time PCR), there was a discrepancy regarding the recorded time periods of total bacterial inactivation, with qPCR revealing longer periods for complete bacterial reduction.

Conclusions

PEC is superior to PC in terms of E. faecalis inactivation presumably due to a more efficient separation and utilization of the photogenerated charge carriers, and it is mainly affected by the applied potential, initial bacterial concentration and the aqueous matrix.