Correspondence analysis of paper recycling society: consumers and paper makers in Japan

Paper passes through many hands. In the present paper, key parts of this cycle in Japan were examined, using questionnaire surveys of households and paper makers. The study aimed to examine the paper makers' strategy for paper production and their attitude to recycling, in comparison with those of the consumers. The study especially focused on toilet paper because consumers have a lot of freedom in purchasing toilet paper. A total of 1242 consumers and 60 paper makers responded. The major findings were as follows. First, we compared the criteria of consumers for purchasing toilet paper with the conjectures of paper makers. Brand, advertisements and the appearance of shopping displays received 60% support from paper makers, but less than 12% of consumers selected these criteria even if we exclude those who do not buy toilet paper or do not have any particular criteria. On the other hand, multiple plies and benefit to the earth were selected by moderate numbers (between 20 and 25%) of consumers, while only 16.77 and 5.69%, respectively of paper makers marked these criteria. Paper makers strongly believe that many retailers sell toilet paper as a loss-leader. By comparing those matters considered important for recycling by consumers with those considered important by makers, it was shown that many makers have a clear awareness of the particular problem, the lack of used paper consumption, in the current paper recycling situation in Japan.     

The value of urban open space: Meta-analyses of contingent valuation and hedonic pricing results

Urban open space provides a number of valuable services to urban populations, including recreational opportunities, aesthetic enjoyment, environmental functions, and may also be associated with existence values. In separate meta-analyses of the contingent valuation (CV) and hedonic pricing (HP) literature we examine which physical, socio-economic, and study characteristics determine the value of open space. The dependent variable in the CV meta-regression is defined as the value of open space per hectare per year in 2003 US$, and in the HP model as the percentage change in house price for a 10 m decrease in distance to open space. Using a multi-level modelling approach we find in both the CV and HP analyses that there is a positive and significant relationship between the value of urban open space and population density, indicating that scarcity and crowdedness matter, and that the value of open space does not vary significantly with income. Further, urban parks are more highly valued than other types of urban open space (forests, agricultural and undeveloped land) and methodological differences in study design have a large influence on estimated values from both CV and HP. We also find important regional differences in preferences for urban open space, which suggests that the potential for transferring estimated values between regions is likely to be limited.     

Relative merits of polystyrene foam and paper in hot drink cups: Implications for packaging

An analysis of the overall relative merits of the use of uncoated paper vs molded polystyrene bead foam in single-use 8-oz cups is described here as a manageable example of the use of paper vs plastics in packaging. In raw material requirements the paper cup required about 2.5 times its finished weight of raw wood and about the same hydrocarbon fueling requirement as is needed for the polystyrene foam cup. To process the raw materials about six times as much steam, 13 times as much electric power, and twice as much cooling water are consumed to produce the paper cup as compared to the polystyrene foam cup. Emission rates to air are similar and to water are generally higher for the paper cup. Virtually all primary use factors favor polystyrene foam over paper. Once used both cup types may be recycled. Landfill disposal of the two items under dry conditions will occupy similar landfill volumes after compaction and will confer similarly slow to nonexistent decomposition to either option. Under wet conditions polystyrene foam will not readily degrade, but may help other materials to do so. Paper under wet conditions will biodegrade to produce methane, a significant greenhouse gas, biochemical oxygen demand to any leachate, and instability to the land surface during the process. Both materials can be incinerated cleanly in a municipal waste stream with the option of energy recovery, to yield an ash volume of 2%–5% of the incoming waste volume. Overall this analysis would suggest that polystyrene foam, with an extension to plastics in general, should be given more evenhanded consideration relative to paper in packaging applications than is currently the case.     

我国造纸工业对环境的污染及解决方法

本文论述造纸工业的主要污染源及解决造纸工业对环境污染问题的关键技术和方法, 提出我国造纸工业环境保护的基本对策,认为我国的造纸工业也能成为洁净工业。     

Application of recycled paper sludge and biomass materials in manufacture of green composite pallet

Rice straw, rice husk and paper sludge are by-products and industrial waste, and are beneficial resources as raw biomass materials used for manufacturing value-added composite products. We investigated the effect on selected mechanical properties of adding rice straw, rice husk and paper sludge to wood composites to replace wood particles for manufacturing green pallets. Results showed that increasing the contents of rice straw and rice husk dramatically decreased the mechanical strength of the composites. This is because the wax and silicate coating of these materials obstructed the strong bonding with UF resin. When 10 wt.% of wood particle was replaced with 10 wt.% of paper sludge, the wood–paper sludge composites showed similar mechanical properties to those of wood particle. Wood particle can be replaced by 10 wt.% of dried paper sludge in accordance with the minimum requirement recommended by standards in green pallet manufacturing.     

Conservation of resources in the pulp and paper industry derived from cleaner production approach

This paper analyses the utilization of water and recycled fiber from waste paper for the production in one Serbian cardboard mill. Water and fiber consumption, wastewater generation and its characteristics, as well as sludge recirculation were monitored during production of various paper types, with different grade and weight. The aim was to evaluate production rationality and running stability concerning water and fiber utilization and possibilities for their conservation. Cleaner production measures inside the mill and in the effluent treatment plant were suggested for the improvement of wastewater quality and water conservation. Savings in water and fibers were estimated, with the respect to economic and environmental aspects of proposed cleaner production measures.     

The removal of lignin and phenol from paper mill effluents by electrocoagulation

This study aims to investigate the treatment of paper mill effluents using electrocoagulation. Removal of lignin, phenol, chemical oxygen demand (COD) and biological oxygen demand (BOD) from paper mill effluents was investigated at various current intensities by using different electrodes (Al and Fe) and at various electrolysis times (1.0, 2.5, 5.0 and 7.5min). It was observed that the experiments carried out at 12V, an electrolysis time of 2min and a current intensity of 77.13mA were sufficient for the removal of these pollutants with each electrode. The removal capacities of the process using an Al electrode were 80% of lignin, 98% of phenol, 70% of BOD, and 75% of COD after 7.5min. Using an Fe electrode the removal capacities were 92%, 93%, 80% and 55%, respectively. In addition, it was found that removal of lignin, phenol, BOD and COD increased with increasing current intensity. In the experiments carried out at different current intensities, higher removal can be explained through a decrease in intra-resistance of solution and consequently an increase at the transfer speed of organic species to electrodes. It was also found that Al electrode performs higher efficiency than Fe electrode except for COD removal. However, the time required for removal of BOD was more than that of COD. The results suggest that electrocoagulation could be considered as an effective alternative to paper mill effluents treatment.     

On the value of large predators in Sweden: a regional stratified contingent valuation analysis

This paper contributes with an applied policy analysis of the predator preservation policy in Sweden. We estimate the overall mean willingness to pay (WTP) for preserving the four large predators in the Swedish fauna by applying the contingent valuation method. Using survey data from 2004 we find that 50 percent of the Swedish population is willing to contribute financially toward implementation of the predator policy package, and that the estimated overall mean WTP is approximately SEK 290. Further, we test for spatial differences in attitudes and WTP and find that respondents in Stockholm have the highest overall mean WTP, while respondents living in wolf-territories have the lowest. Our mean WTP measure is flawed with upward bias, since we cannot estimate the willingness to accept for those with clearly negative preferences regarding the predator policy package (e.g. hunters). In this paper, we set their WTP equal to zero. Thus, we cannot rule out the possibility that the mean willingness to pay is, in fact, negative, i.e. the social-value of implementing the predator policy is negative. Finally, the estimates of the overall WTP are sensitive to response-uncertainty. When the respondents indicate uncertainty about their valuation, they tend to state higher values.     

An intergrated waste survey and environmental effects of COGIDO, a bleached pulp and paper mill in Vietnam, on the receiving waterbody

An integrated investigation on wastewater characterization and the environmental effects from the COGIDO pulp and paper mill in Bien Hoa Industrial Estate, Vietnam, a chlorine bleached soda integrated pulp and paper mill operating without a chemical recovery system, on the receiving water body was conducted during the rainy and dry seasons in 1993 and 1995. The pollution load from the mill was very high in terms of BOD, COD and SS (COD_m: 58.7 t/d; BOD: 33.3 t/d and SS: 25.1 t/d). The effluent toxicity was determined using four toxicity tests: the green micro-alga, Selenastrum capricornutum, Microtox (marine bacteria: Photobacterium phosphoreum), the duckweed, Lemna aequinoctialis, and fish (silver barb: Puntius gonionotus, and Tilapia: Tilapia nilotica). Selenastrum capricornutum was the most sensitive among the tested organisms. The mill toxicity emission rate (TER) was as high as 338 610 (Selenastrum test). The bleaching-pulp and semi-chemical pulp plants which contributed the largest pollution load to the total COGIDO effluent, therefore, were targeted for abatement measures. Physico-chemical parameters as well as qualitative and quantitative aquatic organism composition for the river water were established. The BOD₅ and COD values exceeded the potable surface water standard by a factor of 2 to 4. The species diversity and abundance of the phytoplankton, zooplankton and zoobenthos were found to be lower (20–40%) than that of unpolluted rivers in Vietnam, whereas pollution-indicator species increased up to four times during the dry season 1995.     

Material flow analysis of paper in Korea. Part I. Data calculation model from the flow relationships between paper products

The flows of paper are analyzed throughout the papermaking processes, with the year 2007 and Korea defined as the system boundaries. In practice, the statistical data on the production, import and export of paper or pulp can be collected with relative ease from the government and industrial associations. However, the input data regarding the volumes of pulp and wastepaper used in different paper products, such as newsprint, printing papers, sanitary and household papers, specialty papers, and corrugating board base, are difficult to obtain because such information is generally kept confidential in the course of corporate operations.The production processes of paper products in Korea are modeled using information on raw materials, their compositions and production yields of products in order to identify and quantify the amounts of pulp and wastepaper used in each paper product. The material flows of paper are then analyzed based on the calculation model derived from the correlation of input and output flows between the individual processes throughout the entire paper lifecycle. Accuracy analysis using both mean absolute error (MAE) and mean absolute percent error (MAPE) is conducted to verify the amounts of pulp and wastepaper calculated from the proposed model against the volumes of domestically consumed pulp and wastepaper provided in the national statistics. Although the calculated values for the past (i.e., the 1980s and 1990s) differ to some degree from the statistical values, the data for the 2000s have a relatively higher level of accuracy, with the MAPE of the total pulp and recycling volume at 5.39% and 5.30%, respectively, thus validating the adequacy of the proposed modeling method. The proposed calculation model can be effectively used in the material flow analysis (MFA) of paper to reduce the burden of data collection and obtain relatively accurate results.     

BENEFITS OF POLLUTION CONTROL ON MASSACHUSETTS’ HOUSATONIC RIVER: A HEDONIC PRICING APPROACH1

ABSTRACT: This paper illustrates one mode of analysis for estimating the benefits of water pollution control projects. Results indicate regional benefits associated with an abatement program instituted for point source pollution along the Housatonic River during the 1960's were substantial. Studies of this kind can aid regulatory and recreation resource administrators in devising and evaluating environmental programs.     

Management of treated pulp and paper mill effluent to achieve zero discharge

Pulp and paper mills are one of the major effluent generating industries in the world. In most cases, mill effluent (treated or raw) is discharged back into a river, creek, stream or other water body; resulting in negative environmental impacts, as well as social concerns, among the downstream users. Pulp and paper mill effluent management, which could result in zero discharge into downstream water bodies, would present the best management option to address socio-environmental concerns. This paper presents such an effort aimed at closing the water cycle by using treated effluent from the mill to irrigate forage and fodder crops for producing animals feed. The treated effluent is delivered from the mill through gravity into a winter storage dam of 490ML capacity. For irrigation applications on 110ha of farmland, which is 42% of the total farmland, the water is pumped from the winter storage dam to five individual paddocks with Centre Pivot (CP) irrigators and one rectangular paddock with a Soft Hose Travelling (SHT) irrigator. From October 2001 to June 2006, a total of 2651mm of wastewater was applied at the farm. The impact assessment results, obtained from field monitoring, investigations and analysis, indicated that the closed water cycle effluent management strategy described had resulted in a lessening of the impact on water resources usually associated with paper mills. However, social attitudes to the use of crops that have been irrigated with recycled waters and the resulting impact on market value of the produce may still be a major consideration.     

Cost‐benefit analysis of paper recycling: a case study and some general principles

This paper sets out the legislative background to the recycling of waste materials in the UK. Relevant items in this background include: the provision of recycling credits under the 1990 Environmental Protection Act; the draft EC Packaging Waste Directive; and the German DSD scheme. We next set out the elements of a cost‐benefit analysis of waste paper recycling, including the environmental impacts of recycling. The method is then applied to a recycling scheme in central Scotland. We find that whilst on private, financial grounds the scheme is unattractive, it passes the cost‐benefit test in the base‐line case; this justifies government support for this recycling scheme, given the data used.     

Reusable and disposable cups: An energy-based evaluation

A group of five different types of reusable and disposable hot drink cups have been analyzed in detail with respect to their overall energy costs during fabrication and use. Electricity generating methods and efficiencies have been found to be key factors in the primary energy consumption for the washing of reusable cups and a less important factor in cup fabrication. In Canada or the United States, over 500 or more use cycles, reusable cups are found to have about the same or slightly more energy consumption, use for use, as moulded polystyrene foam cups used once and then discarded. For the same area paper cups used once and discarded are found to consume less fossil fuel energy per use than any of the other cup types examined. Details of this analysis, which could facilitate the comparative assessment of other scenarios, are presented.     

Recycling, reuse and energetic valuation of meat industry wastes in Extremadura (Spain)

The environmental problem caused by the effluents from the four main agrifood industries in Extremadura (W Spain) is evaluated in the present work. In particular, attention is paid to the management of wastes from slaughterhouse operations. Pollution is quantified in terms of equivalent population and biological oxygen demand, for which very high values are reported.Efforts are also focused on the search of viable technical solutions for the treatment of those residues and their energetic valuation. In this sense, anaerobic digestion techniques are proposed, not only because they lead to a drastic decrease in their pollution potential, but also because significant volumes of biogas are obtained. This biogas might be used to produce electricity to be transferred to the electrical network. This way, anaerobic digestion plants would allow depreciation within a relatively short period.In particular, an analysis of the economics of a plant for the codigestion of solid and liquid effluents from meat industry is carried out, and a payback time between 7 and 8 years was achieved.     

Based on material flow analysis: Value chain analysis of China iron resources

Iron is an important basic resource for national economic development in China. It is of great strategic importance for the sustainable development of China's economy to study the utilization and circulation status of iron resources. In this paper, using the material flow and value chain analysis method, we quantitatively analyzed the value flow of iron resources in China. According to the value chain and price theory of element M, a value stream diagram of iron resources corresponding to the substance flow chart was plotted. Based on the previous material flow analysis result of iron resources, the diagram quantitatively depicted the value of the circulating flow of iron resources in China in 2011. The results show that by recycling materials, the value of the circulating flow of iron resources can bring considerable economic benefits to both producers and consumers. In the production stage, the expenditures of the entire economic system was reduced by 91.77 billion RMB by circulating iron and the income increased by 95 billion RMB by recycling home scrap, which was generated in the crude steel production stage. In the use stage of iron and steel products, the recycling of old scrap enabled the entire economic system to recover 370.78 billion RMB. It should be noted that analysis within a single framework of physical and economic characteristics of iron resources in the economic system can further extend the research chain of substance flow and value flow at the macro level, enhancing the economic value of substances flow research. In addition, by tracking and depicting the value flow cycle of elements, the improvement potentials and the value situations can be determined to provide useful information for conducting processing and technological innovation for waste minimization.     

Landscape design,planning, and management: An approach to the analysis of vegetation

The process of analyzing vegetation in terms of its suitability for various non-consumptive uses is primitive in comparison with systems for evaluating other resources such as soil and topography. This paper proposes a framework for developing a standardized, quantitative vegetation analysis system based on plant ecology methods. A tentative scheme under study in Wisconsin is presented for discussion purposes.     

Management and valuation of an environmentally sensitive area: Norfolk Broadland,England, case study

Wetlands, like any other environmentally sensitive resource, require very careful evaluation. While it is accepted that all wetlands may be equally valuable in terms of maintaining global life-support systems, individual areas may be ranked according to their uniqueness or the irreplaceability of the resource should the wetland be developed. The various techniques available for evaluating the wetland resource in the development versus conservation conflict situation are critically assessed. Indirect appraisal via the opportunity cost method can generate valuable data which have contributed to the mitigation of such conflict situations.The Broadland, in Norfolk, England, recently designated an environmentally sensitive area (ESA), provides a case study example of wetland management. The search for an acceptable flood alleviation strategy for the ESA is examined in detail. The economic and environmental asset structure of the study area is examined at two levels. A basic screening system is applied to each of the identified flood protection planning units to enable the rank ordering of the units. A more detailed appraisal is then made of the value of selected units so that the cost-effectiveness of any planned expenditure on flood protection works can be assessed. Specific management issues and their likely effect on the environment, in terms of land use for example, are also addressed. The 1986 Agriculture Act marks a potential watershed in British conservation policy. The ESA policy encompasses a dual management strategy that attempts to stimulate compatible agricultural and conservation practices and activities. Other countries that still retain significant unspoiled wetland resources may find that preemptive regulatory government intervention in favor of conservation would help to avoid the worst aspects of the British experience.     

Recycling and consumption in Germany and Japan: a case of toilet paper

This paper compares the recycling attitudes of consumers in Germany and Japan, based on our nationwide questionnaires. We analyzed consumption behavior as well as recycling behavior in narrow sense, because it is important to study the former to see how the supply of recycled materials is balanced with the demand, particularly in Japan which exports little recycled materials. Toilet paper was adopted as a specific good for study, because consumers have options of buying virgin products and recycled products. It was found that German households pay for waste collection specifically and have higher recycling rates than Japanese households. On the other hand, similar figures in German and Japanese consumers were observed with regard to consumption of recycled products. Their purchasing criteria and preference on virgin and recycled products of toilet paper were examined by self-report and blind test with 2×2 experimental design for toilet paper (German versus Japanese, virgin versus recycled). Blind test showed that people prefer domestic and virgin products in both countries. Half of respondents rating virgin products guessed that the products contained recycled material. For Japanese, the material of the sample toilet paper, made from virgin pulp, seems to be a more determining factor than the nationality of products, i.e. made in Japan. On the other hand, for Germans, the domestic nature seems to be a more dominant factor than the material, i.e. made from virgin material. Canonical discriminant analysis in conjunction with logistic regression based on self-reporting data detected the characters ‘multiplied’, ‘appearance’ and ‘brand’ as major factors making the difference in preference between the two countries. The possible reasons causing the similarity and dissimilarity between the two countries are discussed with reference to the background history.