Spatial pattern of Solid Waste generation of Ilorin—Nigeria

The generation pattern of Solid Waste has not been identified in most of the developing world. Investigation on the generation of waste in Ilorin, shows that the generation pattern differs from most acclaimed pattern of the developed world. By far, leaf waste constitutes the most generated waste. However, the investigation shows that the higher the number in the family, the less the amount of leaf waste generated. Paper and food left-over form twenty-seven and twenty per cent of waste generated respectively and high education seems to be an important factor in the amount of metal waste produced.     

An off-site snapshot methodology for estimating building construction waste composition - a case study of Hong Kong

Waste composition analysis is essential for implementing appropriate management strategies. In Hong Kong, on-site waste quantification is often not practical due to site space limitation at construction sites. In addition, as the construction waste problem urgently needs addressing, reliable waste generation rates need to be derived over a short time. To address these two issues, this study presents an off-site snapshot methodology for estimating construction waste composition. Three construction sites, at the initial stage, mid-stage, and end stage respectively, are selected for illustrating the proposed snapshot methodology. It is found that the composition of inert and non-inert waste varies significantly at different construction stages. Non-inert waste is an important component of building construction waste, of which wood & timber waste contributes the largest proportion. Following wood & timber waste, metal waste is the second largest source of non-inert waste. Results show that the proposed off-site snapshot methodology can sufficiently solve the problem of limited on-site sorting space and derive reliable detailed waste generation information over a certain short time.     

A Novel Stochastic Optimization Model for Reverse Logistics Network Design of End-of-Life Vehicles: A Case Study of Istanbul

Environmental Modeling & Assessment - Waste management is gaining crucial importance as recycling aims at transforming produced waste into value for the economy. As the automotive industry is...     

电解铝企业阳极残渣、阳极残极浸出毒性鉴别及管理建议

对电解铝企业产生的阳极残渣、阳极残极浸出毒性进行了鉴别。鉴别结果表明：电解铝企业产生阳极残渣浸出液中氟化物（不含氟化钙）平均质量浓度为140 mg／L,最高达244 mg／L,且超标试样数达到《危险废物鉴别标准浸出毒性鉴别》中相应规定,鉴别该废物属于危险废物,应按照危险废物进行管理;阳极残极浸出液中氟化物（不含氟化钙）平均质量浓度为74 mg／L,无超标试样数,该废物不属于具有氟化物浸出毒性的固体废物,建议仍按一般固体废物进行管理。     

基于健康风险的危险废物智能化分级分类研究

在分析国内外危险废物分级管理经验的基础上,结合健康风险的评估步骤,提出了基于全过程危险废物污染物释放情景的精细化-动态健康风险评价方法。充分考虑处理利用工艺、企业管理水平等因素对于危险废物中污染物释放概率和能力的影响,并基于污染物向环境介质的迁移转化,定量评估危险废物的健康风险。基于危险废物污染特性数据库和事故情景数据库,结合全过程信息采集技术,构建危险废物分级分类管理平台,进行涉废企业的风险级别划分,实施差异化管理,形成更加科学有效的危险废物全过程精细化管理体系。     

The effects of socioeconomic parameters on household solid-waste generation and composition in developing countries (a case study: Ahvaz,Iran)

Environment problems associated with the generation of waste are part of societal changes where households play an important role. These societal changes influence the size, structure and characteristic of given households. For the effective planning of solid-waste handling infrastructure, it is essential to know the quantity of waste generation and its composition. This paper presents the findings of a study carried out in an urban municipal area in Iran to determine the household solid-waste generation rate and waste composition based on field surveys and to determine the related socioeconomic parameters. The dependent variables were waste generation and composition, and independent variables were family size, family employment, age, number of room and education. Over 400 sample households were selected for the study using a stratified random sampling methodology and from five different socioeconomic groups. Waste collected from all groups of households were segregated and weighted. Waste generation rate was 5.4 kg/household/day. Household solid waste comprised of ten categories of wastes and with the largest component (76.9%). The generation and composition of household solid waste were correlated with family size, education level and households income. This paper adequately suggests new insights concerning the role of socioeconomic parameters in affecting the generation of household waste.     

Geospatial strategy for sustainable management of municipal solid waste for growing urban environment

This paper presents the implementation of a Geospatial approach for improving the Municipal Solid Waste (MSW) disposal suitability site assessment in growing urban environment. The increasing trend of population growth and the absolute amounts of waste disposed of worldwide have increased substantially reflecting changes in consumption patterns, consequently worldwide. MSW is now a bigger problem than ever. Despite an increase in alternative techniques for disposing of waste, land-filling remains the primary means. In this context, the pressures and requirements placed on decision makers dealing with land-filling by government and society have increased, as they now have to make decisions taking into considerations environmental safety and economic practicality. The waste disposed by the municipal corporation in the Bhagalpur City (India) is thought to be different from the landfill waste where clearly scientific criterion for locating suitable disposal sites does not seem to exist. The location of disposal sites of Bhagalpur City represents the unconsciousness about the environmental and public health hazards arising from disposing of waste in improper location. Concerning about urban environment and health aspects of people, a good method of waste management and appropriate technologies needed for urban area of Bhagalpur city to improve this trend using Multi Criteria Geographical Information System and Remote Sensing for selection of suitable disposal sites. The purpose of GIS was to perform process to part restricted to highly suitable land followed by using chosen criteria. GIS modeling with overlay operation has been used to find the suitability site for MSW.     

Seasonal analysis of the generation and composition of solid waste: potential use—a case study

Ensenada health officials lack pertinent information on the sustainable management of solid waste, as do health officials from other developing countries. The aims of this research are: (a) to quantify and analyze the household solid wastes generated in the city of Ensenada, Mexico, and (b) to project biogas production and estimate generation of electrical energy. The characterization study was conducted by socioeconomic stratification in two seasonal periods, and the biogas and electrical energy projections were performed using the version 2.0 Mexico Biogas Model. Per capita solid waste generation was 0.779?±?0.019 kg per person per day within a 98 % confidence interval. Waste composition is composed mainly of food scraps at 36.25 %, followed by paper and cardboard at 21.85 %, plastic at 12.30 %, disposable diapers at 6.26 %, and textiles at 6.28 %. The maximum capacity for power generation is projected to be 1.90 MW in 2019. Waste generated could be used as an intermediate in different processes such as recycling (41.04 %) and energy recovery (46.63 %). The electrical energy that could be obtained using the biogas generated at the Ensenada sanitary landfill would provide roughly 60 % of the energy needed for street lighting.     

固定污染源监测断面的选择对流量测定的影响

监测断面的选择在废气污染源监测中起着相当重要的作用 ,在无法找到完全符合技术规范要求的监测断面时 ,以前常将监测断面选择在砖砌烟囱上的方法。通过实验 ,否定了该方法应用于测定废气流量较小的污染源的可行性 ,提出了应用于测定废气流量较小的污染源时 ,较为成熟的监测断面选择方案。     

论水污染物排放统计指标体系

水污染物排放统计指标体系包括水污染物排放统计指标以及排放管理指标,统计对象主要是规模以上点源。实施统计的污染源的规模应当是全国统一的。统计指标区分为指标、主要参数和辅助参数,既便于理解也便于管理;将排放指标细化为污染源排放量、入河排放量和通量使得排放概念更加清晰,有利于水环境管理。对入河排放量和污染源排放量的比较,可以确定纳入统计范围的污染源的代表性,对通量和入河排放量的比较可以推断非点源污染物排放状况。以流域为单元的,以通量、入河排放量和污染源排放量为主要概念的排放统计管理方式,有助于提高流域水污染防治的确定性和一致性。     

An evaluation of alternative household solid waste treatment practices using life cycle inventory assessment mode

Waste disposal is an important part of the life cycle of a product and is associated with environmental burdens like any other life-cycle stages. In this study, an integrated assessment for solid waste treatment practices, especially household solid waste, was undertaken to evaluate the impact contribution of household solid waste treatment alternatives towards the sustainable development by using Life Cycle Inventory Assessment method. A case study has been investigated under various possible scenarios, such as (1) landfill without landfill gas recovery, (2) landfill with landfill gas recovery and flaring, (3) landfill with landfill gas recovery and electric generation, (4) composting, and (5) incineration. The evaluation utilized the Life Cycle Inventory Assessment method for multiple assessments based on various aspects, such as greenhouse gas emission/reduction, energy generation/consumption, economic benefit, investment and operating cost, and land use burden. The results showed that incineration was the most efficient alternative for greenhouse gas emission reduction, economic benefit, energy recovery, and land use reduction, although it was identified as the most expensive for investment and operating cost, while composting scenario was also an efficient alternative with quite economic benefit, low investment and operating cost, and high reduction of land use, although it was identified as existing greenhouse gas emission and no energy generation. Furthermore, the aim of this study was also to establish localized assessment methods that waste management agencies, environmental engineers, and environmental policy decision makers can use to quantify and compare the contribution to the impacts from different waste treatment options.     

Factors affecting waste generation: a study in a waste management program in Dhaka City, Bangladesh

Information on waste generation, socioeconomic characteristics, and willingness of the households to separate waste was obtained from interviews with 402 respondents in Dhaka city. Ordinary least square regression was used to determine the dominant factors that might influence the waste generation of the households. The results showed that the waste generation of the households in Dhaka city was significantly affected by household size, income, concern about the environment, and willingness to separate the waste. These factors are necessary to effectively improve waste management, growth and performance, as well as to reduce the environmental degradation of the household waste.     

Relation of waste generation and composition to socio-economic factors: a case study

To develop an effective waste management strategy for a given region, it is important to know the amount of waste generated and the composition of the waste stream. Past research has shown that the amount of waste generated is proportional to the population and the average mean living standards or the average income of the people. In addition, other factors may affect the amount and composition of waste. These are climate, living habits, level of education, religious and cultural beliefs, and social and public attitudes. This paper presents the findings of a study carried out in a suburban municipal area in Sri Lanka to determine the solid waste generation rate and waste composition based on field surveys and to determine the related socio-economic factors. A database was developed that included information on the quantity and composition of waste generated in a sample of households in the study area over a time period. The collected data was analysed to relate waste generation and composition data to various socio-economic factors. Over 400 sample households were selected for the study using a stratified random sampling methodology based on municipal wards and property values. A technique that considers both the number of households in a particular income group (property value range) and the standard deviation of property values within a given income group was used to determine the appropriate sample size for each municipal ward. Through category and regression analyses, the quantities of waste and waste composition were related to several socio-economic factors. The paper describes the basis for the sample selection, the methodology adopted for data collection, the socio-economic parameters used for the analysis, and the relationships developed from the analysis.     

Monitoring quantity and characteristics of municipal solid waste in Dhaka City

A reliable estimate of the quantity of solid waste generation in the city is very important for proper solid waste planning and management. However, reported estimates of solid waste generation vary widely and lead to questionability. The reported values have been derived on the assumption of demography, standard rate of waste generation by households, density values, number of trucks engaged for waste transportation and monitoring of truck movement at dump sites, etc. This diverse nature of the available data and the question of accuracy necessitate a rigorous study that has tried to document the waste quantity in the recently formulated master plan of Dhaka City. The socio-economic parameters, behavioral characteristics, generation sources, seasonality, and per capita growth rate are considered in estimating the waste quantity along with its future projections. The findings from the estimation of waste quantities state that seasonal differences in the municipal solid waste stream are not substantial. The most seasonably variable material in the municipal solid waste stream is food waste. Residential waste is relatively homogeneous. Although there are some differences in waste generation depending on demographic and other local factors, most households dispose of essentially similar types of wastes. Variation occurs in waste composition dependent upon income levels and category of sources. Variation also occurs based upon the extent of source reduction and recycling opportunities. As opportunities exist to recycle wastes, the recycling facilities might have to grow at a similar pace to the generation of waste. Physical and chemical characteristics of solid waste are important to implement the waste disposal and management plan for the selection of resource and energy recovery potentials. A number of studies have been conducted to determine the composition of wastes including moisture content and calorific value. The data show that the moisture content in city waste is significantly higher and the calorific value is much lower, which determines the viability of composting or anaerobic digestions rather than waste combustion.     

生物技术行业废弃物排放现状及调查评价

由于生物技术的特殊性,生物技术行业所产生生物废弃物的环境排放,对人体健康和生态环境可能带来安全隐患。目前对生物技术行业产生的生物废弃物监管也尚未形成专门的法规和监测评估体系。在实地调研和实验分析的基础上,归纳分析了上海生物技术行业生物废弃物排放种类和管理现状,探讨了生物废弃物的监测评价技术。     

Evolutionary game analysis of stakeholders' decision-making behaviours in construction and demolition waste management

Continuing industrial development has created large quantities of construction and demolition (C&D) waste, which has led to severe environmental and social problems. The aim of this study was to investigate the decision-making behaviours of stakeholders involved in C&D waste management. Based on evolutionary game theory, stakeholder decision-making behaviours in C&D waste management were analysed, and their influencing factors were identified, including government supervision costs, public participation costs, government penalties, government incentives, government supervisory intensity, probability of contractors conducting illegal dumping, probability of public participation, and probability of illegal dumping being detected. The results also revealed how government penalties and incentives impacted the decision-making behaviours of the contractors and public. Penalties and incentives can effectively reduce illegal C&D waste dumping behaviours, while excessive penalties and incentives have limitations in controlling illegal dumping. The model proposed in this research provides an experimental simulation platform to determine the appropriate values for government penalties and incentives for C&D waste management based on stakeholder decision-making behaviours. In addition, the research results for the stable strategy point of a three-party evolutionary game model demonstrated the importance of public participation in C&D waste management. These results may inform research hypotheses for future empirical studies and provide a simple model for developing appropriate government penalties and incentives in practice.     

Exploring the “not in my backyard” effect in the construction of waste incineration power plants - based on a survey in metropolises of China

Waste incineration power plants have become the best option in face of the increasing amount of garbage in China's cities. However, constructing waste incineration power plants will cause “not in my backyard” (NIMBY) effect in the public. To identify variables causing this effect and measure the effect quantitatively, we designed and carried out a random survey in four metropolises in China. Of the 3133 questionnaires distributed, 3066 are thought to be effective. Males, persons with higher educational levels, or with higher income, or having underaged children in their families, or thinking their neighborhoods are upscale ones are willing to pay more to avoid the construction of waste incineration power plants in their surroundings than others. In addition, provided that the respondents deem that the construction of waste incineration power plants would have an impact on their lives, they are willing to pay more no matter they own their departments or not. Finally, the estimated willingness to pay (WTP) to avoid the waste incineration power plants is 105 yuan to 133 yuan per month. Hence, the government should treat the NIMBY syndrome well in the construction of waste incineration power plants, with WTP being one perspective to persuade the public.     

Dynamics of industrial waste stabilization pond treatment process

Waste stabilization pond is an artificial ecosystem; its performance is governed by the nature of the biological communities it supports. These are primarily used as secondary effluent treatment plants to polish the effluents. However, they are also used to treat the raw sewage and industrial effluents. In the present study, the functioning of a waste stabilization pond system from an industrial complex located in Goa was taken up. The raw waste released by the industrial complex and the final effluent released from the stabilization ponds were analyzed for pH, dissolved oxygen (DO), biological oxygen demand, phosphate content, chlorophyll content, and algal diversity and density. Also, the activities of the enzymes catalase and phosphatase were measured. The study was carried out for a period of 1 year and the data covering pre-monsoon, monsoon, and post-monsoon seasons are tabulated. The study revealed that DO, chlorophyll content, and algal count were maximum during pre-monsoon when compared to monsoon and post-monsoon. Similarly, maximum enzymatic activity was recorded during pre-monsoon and also maximum removal of biological oxygen demand and phosphate was recorded during this period than in monsoon and post-monsoon.     

A thematic review of life cycle assessment (LCA) applied to pig production

Commercial livestock production is known to have significant impacts on the environment. Pig production is a complex system which involves the production of animal feed, transportation, animal rearing and waste management. One tool for assessing the environmental performance of such complex systems is life cycle assessment (LCA). LCA has been applied to pig production considerably to date. This paper provides a chronological review of state-of-the-art pig production LCAs under three themes: feed production; entire-system livestock rearing; and waste management. The study considers how LCA applications have addressed technological improvements in animal husbandry, and highlights methodological limitations, particularly related to cross-study comparisons. Recent research demonstrates crude protein reduction in feed and anaerobic treatment of pig excreta resulting in bioenergy production are the key targets for environmental performance improvements related to pig production.