Safety analysis of urban signalized intersections under mixed traffic

IntroductionThis study examined the crash causative factors of signalized intersections under mixed traffic using advanced statistical models.MethodHierarchical Poisson regression and logistic regression models were developed to predict the crash frequency and severity of signalized intersection approaches. The prediction models helped to develop general safety countermeasures for signalized intersections.ResultsThe study shows that exclusive left turn lanes and countdown timers are beneficial for improving the safety of signalized intersections. Safety is also influenced by the presence of a surveillance camera, green time, median width, traffic volume, and proportion of two wheelers in the traffic stream. The factors that influence the severity of crashes were also identified in this study.Practical applicationAs a practical application, the safe values of deviation of green time provided from design green time, with varying traffic volume, is presented in this study. This is a useful tool for setting the appropriate green time for a signalized intersection approach with variations in the traffic volume.     

Quantifying the impact of adaptive traffic control systems on crash frequency and severity: Evidence from Oakland County,Michigan

IntroductionDespite seeing widespread usage worldwide, adaptive traffic control systems have experienced relatively little use in the United States. Of the systems used, the Sydney Coordinated Adaptive Traffic System (SCATS) is the most popular in America. Safety benefits of these systems are not as well understood nor as commonly documented.MethodThis study investigates the safety benefits of adaptive traffic control systems by using the large SCATS-based system in Oakland County, MI known as FAST-TRAC. This study uses data from FAST-TRAC-controlled intersections in Oakland County and compares a wide variety of geometric, traffic, and crash characteristics to similar intersections in metropolitan areas elsewhere in Michigan. Data from 498 signalized intersections are used to conduct a cross-sectional analysis. Negative binomial models are used to estimate models for three dependent crash variables. Multinomial logit models are used to estimate an injury severity model. A variable tracking the presence of FAST-TRAC controllers at intersections is used in all models to determine if a SCATS-based system has an impact on crash occurrences or crash severity.ResultsEstimates show that the presence of SCATS-based controllers at intersections is likely to reduce angle crashes by up to 19.3%. Severity results show a statistically significant increase in non-serious injuries, but not a significant reduction in incapacitating injuries or fatal accidents.     

Analysis of hourly crash likelihood using unbalanced panel data mixed logit model and real-time driving environmental big data

IntroductionDriving environment, including road surface conditions and traffic states, often changes over time and influences crash probability considerably. It becomes stretched for traditional crash frequency models developed in large temporal scales to capture the time-varying characteristics of these factors, which may cause substantial loss of critical driving environmental information on crash prediction.MethodCrash prediction models with refined temporal data (hourly records) are developed to characterize the time-varying nature of these contributing factors. Unbalanced panel data mixed logit models are developed to analyze hourly crash likelihood of highway segments. The refined temporal driving environmental data, including road surface and traffic condition, obtained from the Road Weather Information System (RWIS), are incorporated into the models.ResultsModel estimation results indicate that the traffic speed, traffic volume, curvature and chemically wet road surface indicator are better modeled as random parameters. The estimation results of the mixed logit models based on unbalanced panel data show that there are a number of factors related to crash likelihood on I-25. Specifically, weekend indicator, November indicator, low speed limit and long remaining service life of rutting indicator are found to increase crash likelihood, while 5-am indicator and number of merging ramps per lane per mile are found to decrease crash likelihood.ConclusionsThe study underscores and confirms the unique and significant impacts on crash imposed by the real-time weather, road surface, and traffic conditions. With the unbalanced panel data structure, the rich information from real-time driving environmental big data can be well incorporated.     

Driver behavior analysis for right-turn drivers at signalized intersections using SHRP 2 naturalistic driving study data

IntroductionUnderstanding driver behavior is important for traffic safety and operation, especially at intersections where different traffic movements conflict. While most driver-behavior studies are based on simulation, this paper documents the analysis of driver-behavior at signalized intersections with the SHRP 2 Naturalistic Driving Study (NDS) data. This study analyzes the different influencing factors on the operation (speed control) and observation of right-turn drivers.MethodA total of 300 NDS trips at six signalized intersections were used, including the NDS time-series sensor data, the forward videos and driver face videos. Different factors of drivers, vehicles, roads and environments were studied for their influence on driver behavior. An influencing index function was developed and the index was calculated for each influencing factor to quantitatively describe its influencing level. The influencing index was applied to prioritize the factors, which facilitates development and selection of safety countermeasures to improve intersection safety. Drivers' speed control was analyzed under different conditions with consideration of the prioritized influencing factors.ResultsVehicle type, traffic signal status, conflicting traffic, conflicting pedestrian and driver age group were identified as the five major influencing factors on driver observation.ConclusionsThis research revealed that drivers have high acceleration and low observation frequency under Right-Turn-On-Red (RTOR), which constituted potential danger for other roadway users, especially for pedestrians.Practical applicationsAs speed has a direct influence on crash rates and severities, the revealed speed patterns of the different situations also benefit selection of safety countermeasures at signalized intersections.     

Investigation of crashes at pedestrian hybrid beacons: Results of a large-scale study in Arizona

Introduction: The pedestrian hybrid beacon (PHB) is a traffic control device used at pedestrian crossings. A recent Arizona Department of Transportation research effort investigated changes in crashes for different severity levels and crash types (e.g., rear-end crashes) due to the PHB presence, as well as for crashes involving pedestrians and bicycles. Method: Two types of methodologies were used to evaluate the safety of PHBs: (a) an Empirical Bayes (EB) before-after study, and (b) a long-term cross-sectional observational study. For the EB before-after evaluation, the research team considered three reference groups: unsignalized intersections, signalized intersections, and both unsignalized and signalized intersections combined. Results: For the signalized and combined unsignalized and signalized intersection groups, all crash types considered showed statistically significant reductions in crashes (e.g., total crashes, fatal and injury crashes, rear-end crashes, fatal and injury rear-end crashes, angle crashes, fatal and injury angle crashes, pedestrian-related crashes, and fatal and injury pedestrian-related crashes). A cross-sectional study was conducted with a larger number of PHBs (186) to identify relationships between roadway characteristics and crashes at PHBs, especially with respect to the distance to an adjacent traffic control signal. The distance to an adjacent traffic signal was found to be significant only at the α = 0.1 level, and only for rear-end and fatal and injury rear-end crashes. Conclusions: This analysis represents the largest known study to date on the safety impacts of PHBs, along with a focus on how crossing and geometric characteristics affect crash patterns. The study showed the safety benefits of PHBs for both pedestrians and vehicles. Practical Applications: The findings from this study clearly support the installation of PHBs at midblock or intersection crossings, as well as at crossings on higher-speed roads.     

Whether conversion and weather matter to roundabout safety

IntroductionRoundabouts, as a form of intersection traffic control, are being constructed increasingly because of their promise to improve both efficiency and safety. However, roundabout performance varies from one context to another; and information on their performance during inclement weather is limited.MethodsTo evaluate the safety effects of converting signal-controlled intersections to modern roundabouts in a region that historically was unfamiliar with this type of traffic control, an empirical Bayes approach was used to analyze. Second, to examine the potential effects of rainfall on roundabout safety, a matched-pair approach was used to compare risk estimates of collision occurrence at roundabouts and signalized intersections under inclement weather conditions.ResultsRoundabout installation is shown as an effective safety intervention for serious collisions since conversion from signalized intersections to roundabouts translates into an overall 20% reduction in the occurrence of injury/fatal collisions. However, roundabouts witnessed more property-damage collisions than what would have been expected had the conversion not occurred. With respect to weather, there is no evidence of a statistically significant increase in crashes on days with rainfall relative to good weather conditions for roundabouts, whereas there is evidence of such an increase in crash risk estimated to be 4% to 22% for signalized intersections.ConclusionsWhile injury collisions are consistently found to be lower at intersections that have been converted from signalized intersections to roundabouts, the same is not always that case for property-damage collisions, suggesting that drivers need time to adjust. In terms of weather, the evidence in this paper shows that roundabouts show less sensitivity to rainy conditions than signalized intersections.Practical applicationsThe trade-offs between design, operation, and safety should be considered carefully when planning a new roundabout. More research is required on the specific problems users experience with roundabouts and the effectiveness of public education programs.     

Disaggregated traffic conditions and road crashes in urban signalized intersections

Introduction: Road safety studies in signalized intersections have been performed extensively using annually aggregated traffic variables and crash frequencies. However, this type of aggregation reduces the strength of the results if variables that oscillate over the course of the day are considered (speed, traffic flow, signal cycle length) because average indicators are not able to describe the traffic conditions preceding the crash occurrence. This study aims to explore the relationship between traffic conditions aggregated in 15-min intervals and road crashes in urban signalized intersections. Method: First, an investigation of the reported crash times in the database was conducted to obtain the association between crashes and their precursor conditions. Then, 4.1 M traffic condition intervals were consolidated and grouped using a hierarchical clustering technique. Finally, charts of the frequency of crashes per cluster were explored. Results: The main findings suggest that high vehicular demand conditions are related to an increase in property damage only (PDO) crashes, and an increase in the number of lanes is linked to more PDO and injury crashes. Injury crashes occurred in a wide range of traffic conditions, indicating that a portion of these crashes were due to speeding, while the other fraction was associated with the vulnerability of road users. Traffic conditions with: (a) low vehicular demand and a long cycle length and (b) high vehicular demand and a short cycle length were critical in terms of PDO and injury crashes. Practical Applications: The use of disaggregated data allowed for a stronger evaluation of the relationship between road crashes and variables that oscillate over the course of the day. This approach also permits the development of real-time risk management strategies to mitigate the frequency of critical traffic conditions and reduce the likelihood of crashes.     

An empirical bayes safety evaluation of tram/streetcar signal and lane priority measures in Melbourne

Objective: Streetcars/tram systems are growing worldwide, and many are given priority to increase speed and reliability performance in mixed traffic conditions. Research related to the road safety impact of tram priority is limited. This study explores the road safety impacts of tram priority measures including lane and intersection/signal priority measures.

Method: A before–after crash study was conducted using the empirical Bayes (EB) method to provide more accurate crash impact estimates by accounting for wider crash trends and regression to the mean effects. Before–after crash data for 29 intersections with tram signal priority and 23 arterials with tram lane priority in Melbourne, Australia, were analyzed to evaluate the road safety impact of tram priority.

Results: The EB before–after analysis results indicated a statistically significant adjusted crash reduction rate of 16.4% after implementation of tram priority measures. Signal priority measures were found to reduce crashes by 13.9% and lane priority by 19.4%. A disaggregate level simple before–after analysis indicated reductions in total and serious crashes as well as vehicle-, pedestrian-, and motorcycle-involved crashes. In addition, reductions in on-path crashes, pedestrian-involved crashes, and collisions among vehicles moving in the same and opposite directions and all other specific crash types were found after tram priority implementation.

Conclusions: Results suggest that streetcar/tram priority measures result in safety benefits for all road users, including vehicles, pedestrians, and cyclists. Policy implications and areas for future research are discussed.     

Crash analysis and development of safety performance functions for Florida roads in the framework of the context classification system

Introduction: Safety performance functions (SPF) are employed to predict crash counts at the different roadway elements. Several SPFs were developed for the various roadway elements based on different classifications such as functional classification and area type. Since a more detailed classification of roadway elements leads to more accurate crash predictions, multiple states have developed new classification systems to classify roads based on a comprehensive classification. In Florida, the new roadway context classification system incorporates geographic, demographic, and road characteristics information. Method: In this study, SPFs were developed in the framework of the FDOT roadway context classification system at three levels of modeling, context classification (CC-SPFs), area type (AT-SPFs), and statewide (SW-SPF) levels. Crash and traffic data from 2015-2019 were obtained. Road characteristics and road environment information have also been gathered along Florida roads for the SPF development. Results: The developed SPFs showed that there are several variables that influence the frequency of crashes, such as annual average daily traffic (AADT), signalized intersections and access point densities, speed limit, and shoulder width. However, there are other variables that did not have an influence in crash occurrence such as concrete surface and the presence of bicycle slots. CC-SPFs had the best performance among others. Moreover, network screening to determine the most problematic road segments has been accomplished. The results of the network screening indicated that the most problematic roads in Florida are the suburban commercial and the urban general roads. Practical Applications: This research provides a solid reference for decision-makers regarding crash prediction and safety improvement along Florida roads.     

Analyses of rear-end crashes based on classification tree models

OBJECTIVE: Signalized intersections are accident-prone areas especially for rear-end crashes due to the fact that the diversity of the braking behaviors of drivers increases during the signal change. The objective of this article is to improve knowledge of the relationship between rear-end crashes occurring at signalized intersections and a series of potential traffic risk factors classified by driver characteristics, environments, and vehicle types. METHODS: Based on the 2001 Florida crash database, the classification tree method and Quasi-induced exposure concept were used to perform the statistical analysis. Two binary classification tree models were developed in this study. One was used for the crash comparison between rear-end and non-rear-end to identify those specific trends of the rear-end crashes. The other was constructed for the comparison between striking vehicles/drivers (at-fault) and struck vehicles/drivers (not-at-fault) to find more complex crash pattern associated with the traffic attributes of driver, vehicle, and environment. RESULTS: The modeling results showed that the rear-end crashes are over-presented in the higher speed limits (45-55 mph); the rear-end crash propensity for daytime is apparently larger than nighttime; and the reduction of braking capacity due to wet and slippery road surface conditions would definitely contribute to rear-end crashes, especially at intersections with higher speed limits. The tree model segmented drivers into four homogeneous age groups: < 21 years, 21-31 years, 32-75 years, and > 75 years. The youngest driver group shows the largest crash propensity; in the 21-31 age group, the male drivers are over-involved in rear-end crashes under adverse weather conditions and the 32-75 years drivers driving large size vehicles have a larger crash propensity compared to those driving passenger vehicles. CONCLUSIONS: Combined with the quasi-induced exposure concept, the classification tree method is a proper statistical tool for traffic-safety analysis to investigate crash propensity. Compared to the logistic regression models, tree models have advantages for handling continuous independent variables and easily explaining the complex interaction effect with more than two independent variables. This research recommended that at signalized intersections with higher speed limits, reducing the speed limit to 40 mph efficiently contribute to a lower accident rate. Drivers involved in alcohol use may increase not only rear-end crash risk but also the driver injury severity. Education and enforcement countermeasures should focus on the driver group younger than 21 years. Further studies are suggested to compare crash risk distributions of the driver age for other main crash types to seek corresponding traffic countermeasures.     

Effects of turning on and off red light cameras on fatal crashes in large U.S. cities

IntroductionThis study updates estimates of effects of activating red light cameras and offers a first look at effects of turning them off.MethodAmong 117 large U.S. cities with more than 200,000 residents in 2014, trends in citywide per capita rates of fatal red light running crashes and of all fatal crashes at signalized intersections were compared between 57 cities that initiated camera programs during 1992–2014 and 33 cities without cameras to examine effects of activating camera programs. Trends also were compared between 19 cities that removed cameras and 31 regionally matched cities with continuous camera programs to evaluate effects of terminating camera programs. Because several cities removed cameras during 2005–2008 and estimated effects might have been confounded by the subsequent economic downturn, primary analyses were limited to the 14 cities that removed cameras during 2010–2014 and 29 regionally matched cities with continuous camera programs. Poisson regression examined the relationship of activating and deactivating cameras with fatal crash rates.ResultsAfter controlling for temporal trends in annual fatal crash rates, population density, and unemployment rates, rates of fatal red light running crashes and of all fatal crashes at signalized intersections were 21% and 14% lower, respectively, in cities with cameras after cameras were turned on than would have been expected without cameras; 30% and 16% higher, respectively, in 14 cities that terminated cameras during 2010–2014 after cameras were terminated than expected had cameras remained; and 18% and 8% higher, respectively, in all 19 cities that removed cameras, but not significantly.ConclusionsThis study adds to the body of evidence that red light cameras can reduce the most serious crashes at signalized intersections, and is the first to demonstrate that removing cameras increases fatal crashes.Practical applicationsCommunities thinking about removing cameras should consider impacts to safety.     

Investigation of injury severities in single-vehicle crashes in North Carolina using mixed logit models

IntroductionRoadway departure (RwD) crashes, comprising run-off-road (ROR) and cross-median/centerline head-on collisions, are one of the most lethal crash types. According to the FHWA, between 2015 and 2017, an average of 52 percent of motor vehicle traffic fatalities occurred each year due to roadway departure crashes. An avoidance maneuver, inattention or fatigue, or traveling too fast with respect to weather or geometric road conditions are among the most common reasons a driver leaves the travel lane. Roadway and roadside geometric design features such as clear zones play a significant role in whether human error results in a crash. Method: In this paper, we used mixed-logit models to investigate the contributing factors on injury severity of single-vehicle ROR crashes. To that end, we obtained five years' (2010–2014) of crash data related to roadway departures (i.e., overturn and fixed-object crashes) from the Federal Highway Administration's Highway Safety Information System Database. Results: The results indicate that factors such as driver conditions (e.g., age), environmental conditions (e.g., weather conditions), roadway geometric design features (e.g., shoulder width), and vehicle conditions significantly contributed to the severity of ROR crashes. Conclusions: Our results provide valuable information for traffic design and management agencies to improve roadside design policies and implementing appropriately forgiving roadsides for errant vehicles. Practical applications: Our results show that increasing shoulder width and keeping fences at the road can reduce ROR crash severity significantly. Also, increasing road friction by innovative materials and raising awareness campaigns for careful driving at daylight can decrease the ROR crash severity.     

Investigating the impacts of crash prediction models on quantifying safety effectiveness of Adaptive Signal Control Systems

Introduction: Adaptive Signal Control System (ASCS) can improve both operational and safety benefits at signalized corridors. Methods: This paper develops a series of models accounting for model forms and possible predictors and implements these models in Empirical Bayes (EB) and Fully Bayesian (FB) frameworks for ASCS safety evaluation studies. Different models are validated in terms of the ability to reduce the potential bias and variance of prediction and improve the safety effectiveness estimation accuracy using real-world crash data from non-ASCS sites. This paper then develops the safety effectiveness of ASCS at six different corridors with a total of 65 signalized intersections with the same type of ASCS, in South Carolina. Results: Validation results show that the FB model that accounts for traffic volume, roadway geometric features, year factor, and spatial effects shows the best performance among all models. The study findings reveal that ASCS reduces crash frequencies in the total crash, fatal and injury crash, and angle crash for most of the intersections. The safety effectiveness of ASCS varies with different intersection features (i.e., AADT at major streets, number of legs at an intersection, the number of through lanes on major streets, the number of access points on minor streets, and the speed limit at major streets). Conclusions: ASCS is associated with crash reductions, and its safety effects vary with different intersection features. Practical Applications: The findings of this research encourage more ASCS deployments and provide insights into selecting ASCS deployment sites for reducing crashes considering the variation of the safety effectiveness of ASCS.     

Investigating the effect of geometric dimensions of median traffic barriers on crashes: Crash analysis of interstate roads in Wyoming using actual crash datasets

IntroductionDespite the numerous safety studies done on traffic barriers’ performance assessment, the effect of variables such as traffic barrier’s height has not been identified considering a comprehensive actual crash data analysis. This study seeks to identify the impact of geometric variables (i.e., height, post-spacing, sideslope ratio, and lateral offset) on median traffic barriers’ performance in crashes on interstate roads.MethodGeometric dimensions of over 110 miles median traffic barriers on interstate Wyoming roads were inventoried in a field survey between 2016 and 2018. Then, the traffic barrier data collected was combined with historical crash records, traffic volume data, road geometric characteristics, and weather condition data to provide a comprehensive dataset for the analysis. Finally, an ordered logit model with random-parameters was developed for the severity of traffic barrier crashes. Based on the results, traffic barrier’s height was found to impact crash severity.ResultsCrashes involving cable barriers with a height between 30″ and 42″ were less severe than other traffic barrier types, while concrete barriers with a height shorter than 32″ were more likely involved with severe injury crashes. As another important finding, the post-spacing of 6.1–6.3 ft. was identified as the least severe range in W-beam barriers.Practical applicationsThe results show that using flare barriers should reduce the number of crashes compared to parallel barriers.     

Effects of red light cameras on violations and crashes: a review of the international literature

Red light running is a frequent cause of motor vehicle crashes and injuries. A primary countermeasure for red light running crashes is police traffic enforcement. In recent years, many police agencies have begun using automated red light cameras as a supplement to conventional enforcement methods. The present study reviewed and evaluated available evidence in the international literature regarding the effectiveness of cameras to reduce both red light violations and crashes. Camera enforcement generally reduces violations by an estimated 40-50%. In terms of crash effects, most studies contain methodological flaws that, to varying degrees, either overestimate (failure to adjust for regression to the mean) or underestimate (comparison with nearby signalized intersections affected by cameras) crash effects. Mindful of these limitations, the research generally indicates that camera enforcement can significantly reduce injury crashes at signalized intersections, in particular right-angle injury crashes. Most studies reported increases in rear-end crashes following camera installation. Taken together the studies indicate that, overall, injury crashes, including rear-end collisions, were reduced by 25-30% as a result of camera enforcement.     

Modeling accident occurrence at signalized tee intersections with special emphasis on excess zeros

In implementing effective remedial treatments at hazardous intersections, it often is necessary to identify the geometric and traffic factors that lead to accident occurrence. However, one particular problem frequently encountered in accident studies is how to distinguish virtually safe intersections with little likelihood of accident occurrence from those that have happened to have no accident due to the random process. To deal with this problem, the "excess" records of zero accident, the zero-inflated negative binomial was used to assign the probability to the accident outcome. Accident data at 104 signalized tee intersections in Singapore over a period of 9 years were employed for model development. The model indicates that uncontrolled left-turn slip road, permissive right-turn phase, existence of a horizontal curve, short sight distances, large number of signal phases, total approach volume, and left-turn volume may increase accident occurrence. On the other hand, right-turn channelization, acceleration section on the left-turn lane, median railings, and more than 5% approach gradient may reduce accident occurrence. Moreover, there is a trend of reducing accidents over the years.     

Examination of the severity of two-lane highway traffic barrier crashes using the mixed logit model

IntroductionVehicles in transport sometimes leave the travel lane and encroach onto natural or artificial objects on the roadsides. These types of crashes are called run-off the road crashes, which account for a large proportion of fatalities and severe crashes to vehicle occupants. In the United States, there are about one million such crashes, with roadside features leading to one third of all road fatalities. Traffic barriers could be installed to keep vehicles on the roadways and to prevent vehicles from colliding with obstacles such as trees, boulder, and walls. The installation of traffic barriers would be warranted if the severity of colliding with the barrier would be less severe than colliding with other fix objects on the sides of the roadway. However, injuries and fatalities do occur when vehicle collide with traffic barriers. A comprehensive analysis of traffic barrier features is lacking due to the absence of traffic barrier features data. Previous research has focused on simulation studies or only a general evaluation of traffic barriers, without accounting for different traffic barrier features.MethodThis study is conducted using an extensive traffic barrier features database for the purpose of investigating the impact of different environmental and traffic barrier geometry on this type of crash severity. This study only included data related to two-lane undivided roadway systems, which did not involve median barrier crashes. Crash severity is modeled using a mixed binary logistic regression model in which some parameters are fixed and some are random.ResultsThe results indicated that the effects of traffic barrier height, traffic barrier offset, and shoulder width should not be separated, but rather considered as interactions that impact crash severity. Rollover, side slope height, alcohol involvement, road surface conditions, and posted speed limit are some factors that also impact the severity of these crashes. The effects of gender, truck traffic count, and time of a day were found to be best modeled with random parameters in this study. The effects of these risk factors are discussed in this paper.Practical applicationsResults from this study could provide new guidelines for the design of traffic barriers based upon the identified roadway and traffic barrier characteristics.     

Residual road departure crashes after full deployment of LDW and LDP systems

Abstract

Objective: Road departures are one of the most severe crash modes in the United States. To help reduce this risk, vehicles are being introduced in the United States with lane departure warning (LDW) systems, which warn the driver of a departure, and lane departure prevention (LDP) systems, which assist the driver in steering back to the roadway. Previous studies have estimated that LDW/LDP systems may prevent one third of drift-out-of-lane road departure crashes. This study investigates the crashes that were not prevented, to potentially set research priorities for next-generation road departure prevention systems.

Methods: The event data recorder (EDR) data from 128 road departure crashes in the National Automotive Sampling System Crashworthiness Data System (NASS-CDS) from 2011 to 2015 were mapped onto the vehicle trajectory and simulated with LDW/LDP to assess the potential for crash avoidance. The model predicted that 63–83% of single-vehicle road departure crashes may not be prevented by an LDW system and 49% may not be prevented by an LDP system.

Results and Conclusions: For LDP systems, which were assumed to have zero latency, no crashes were avoided if the time-to-collision (TTC) from lane crossing to impact was less than 0.55?s. Obstacles such as guardrails and traffic barriers, which tend to be very close to the road, were more common among the remaining crashes. The study shows that LDW/LDP systems are limited by two factors, driver reaction time and TTC to the roadside object. Thus, earlier driver response and longer TTC may help in these situations.     

Examining traffic crash injury severity at unsignalized intersections

Introduction

This study presents multiple approaches to the analysis of crash injury severity at three- and four-legged unsignalized intersections in the state of Florida from 2003 until 2006. An extensive data collection process was conducted for this study.

Method

The dataset used in the analysis included 2,043 unsignalized intersections in six counties in the state of Florida. For the scope of this study, there were three approaches explored. The first approach dealt with the five injury levels, and an ordered probit model was fitted. The second approach was an aggregated one, and dealt with only the severe versus non-severe crash levels, and a binary probit model was used. The third approach dealt with fitting a nested logit model. Results from the three fitted approaches were shown and discussed, and a comparison between the three approaches was shown.

Results

Several important factors affecting crash severity at unsignalized intersections were identified. These include the traffic volume on the major approach, and the number of through lanes on the minor approach (surrogate measure for traffic volume), and among the geometric factors, the upstream and downstream distance to the nearest signalized intersection, left and right shoulder width, number of left turn movements on the minor approach, and number of right and left turn lanes on the major approach. As for driver factors, young and very young at-fault drivers were associated with the least fatal probability compared to other age groups.

Impact on industry

The analysis identified some countermeasures to reduce injury severity at unsignalized intersections. The spatial covariates showed the importance of including safety awareness campaigns for speeding enforcement. Also, having a 90-degree intersection design is the most appropriate safety design for reducing severity. Moreover, the assurance of marking stop lines at unsignalized intersections is very essential.     

A clustering approach to integrate traffic safety in road maintenance prioritization

Objectives: We combine data on roads and crash characteristics to identify patterns in road traffic crashes with regard to road characteristics. We illustrate how combined analysis of data regarding road maintenance, maintenance costs, road characteristics, crash characteristics, and geographical location can enrich road maintenance prioritization from a traffic safety perspective.

Methods: The study is based on traffic crash data merged with road maintenance data and annual average daily traffic (AADT) collected in Denmark. We analyzed 3,964 crashes that occurred from 2010 to 2015. A latent class clustering (LCC) technique was used to identify crash clusters with different road and crash characteristics. The distribution of crash severity and estimated road maintenance costs for each cluster was found and cluster differences were compared using the chi-square test. Finally, a map matching procedure was used to identify the geographical distribution of the crashes in each cluster.

Results: Results showed that based on road maintenance levels there was no difference in the distribution of crash severity. The LCC technique revealed 11 crash clusters. Five clusters were characterized by crashes on roads with a poor maintenance level (levels 4 and 3). Only a few of these crashes included a vulnerable road user (VRU) but many occurred on roads without barriers. Four clusters included a large share of crashes on acceptably maintained roads (level 2). For these clusters only small variations in road characteristics were found, whereas the differences in crash characteristics were more dominant. The last 2 clusters included crashes that mainly occurred on new roads with no need for maintenance (level 1). Injury severity, estimated maintenance costs, and geographical location were found to be differently distributed for most of the clusters.

Conclusions: We find that focusing solely on road maintenance and crash severity does not provide clear guidance of how to prioritize between road maintenance efforts from a traffic safety perspective. However, when combined with geographical location and crash characteristics, a more nuanced picture appears that allows consideration of different target groups and perspectives.