A program-level management system for the life cycle environmental and economic assessment of complex building projects

Climate change has become one of the most significant environmental issues, of which about 40% come from the building sector. In particular, complex building projects with various functions have increased, which should be managed from a program-level perspective. Therefore, this study aimed to develop a program-level management system for the life-cycle environmental and economic assessment of complex building projects. The developed system consists of three parts: (i) input part: database server and input data; (ii) analysis part: life cycle assessment and life cycle cost; and (iii) result part: microscopic analysis and macroscopic analysis. To analyze the applicability of the developed system, this study selected ‘U’ University, a complex building project consisting of research facility and residential facility. Through value engineering with experts, a total of 137 design alternatives were established. Based on these alternatives, the macroscopic analysis results were as follows: (i) at the program-level, the life-cycle environmental and economic cost in ‘U’ University were reduced by 6.22% and 2.11%, respectively; (ii) at the project-level, the life-cycle environmental and economic cost in research facility were reduced 6.01% and 1.87%, respectively; and those in residential facility, 12.01% and 3.83%, respective; and (iii) for the mechanical work at the work-type-level, the initial cost was increased 2.9%; but the operation and maintenance phase was reduced by 20.0%. As a result, the developed system can allow the facility managers to establish the operation and maintenance strategies for the environmental and economic aspects from a program-level perspective.     

Assessment of external costs for transport project evaluation: Guidelines in some European countries

Many studies about the external costs generated by the transport system have been developed in the last twenty years. To standardize methodologies and assessment procedures to be used in the evaluation of the projects, some European countries recently have adopted specific guidelines that differ from each other in some aspects even sensibly.This paper presents a critical analysis of the British, Italian and German guidelines and is aimed at cataloguing the external cost types regarded and the assessment methods indicated as well as to highlight the differences of the results, in terms of applicability and reliability. The goal is to contribute to a European standardization process that would lead to the drafting of guidelines suited for all EU countries.     

Incorporating biophilic criteria into green building rating tools: Case study of Green Mark and LEED

The integration of health and well-being into green building rating tools (GBRTs) has been increasingly advocated in recent years, moving beyond an energy efficiency focus. The proposed research responds to this movement by offering a multi-angle analysis of the process of incorporating biophilic strategies into the GBRTs—the Leadership in Energy and Environmental Design (LEED) V4 for Building Design and Construction, LEED V4 for Neighborhood Development, and Green Mark for Non-Residential Buildings (NRB): 2015. Based on a literature review, 42 categories of biophilic strategies are reformatted and reorganized in this paper. Moreover, four influencing factors are identified in this paper, including climate, policy, hydrology, and geography, which enable a correlative comparison through the categories of landscape, ventilation, interaction, mitigation, sense, and mobility. Based on comprehensive analysis, three findings are identified: (1) the correlations and divergences of biophilic strategies among the GBRTs are scrutinized; (2) policy and climate comprise the key influencing factors with high impacts for GM and LEED BD + C, while policy and geography are key factors for LEED ND, as the GBRTs shift from sustainability to well-being; and (3) corresponding to the identified key factors, suggestions are proposed for the stakeholders to support improvements to facilitate biophilic integration with GM and LEED (BD + C, ND).     

State of rare earth elements in different environmental components in mining areas of China

China has relatively abundant rare earth elements (REEs) reserves and will continue to be one of the major producers of REEs for the world market in the foreseeable future. However, due to the large scale of mining and refining activities, large amounts of REEs have been released to the surrounding environment and caused harmful effects on local residents. This paper summarizes the data about the contents and translocation of REEs in soils, waters, atmosphere, and plants in REE mining areas of China and discusses the characteristics of their forms, distribution, fractionation, and influencing factors. Obviously high concentrations of REEs with active and bioavailable forms are observed in all environmental media. The mobility and bioavailability of REEs are enhanced. The distribution patterns of REEs in soils and water bodies are all in line with their parent rocks. Significant fractionation phenomenon among individual members of REEs was found in soil–plant systems. However, limited knowledge was available for REEs in atmosphere. More studies focusing on the behavior of REEs in ambient air of REE mining areas in China are highly suggested. In addition, systematic study on the translocation and circulation of REEs in various media in REEs mining areas and their health risk assessment should be carried out. Standard analytical methods of REEs in environments need to be established, and more specific guideline values of REEs in foods should also be developed.     

Applying the grey assessment to the evaluation system of ecological green space on greening projects in Taiwan

This study is designed to develop an alternative evaluation method for ecological green space. It offers criteria for identifying ecological green space on building sites. The grey decision-making method is applied to assess the greening project at the first step. The evaluation items are rebuilt by the analytic hierarchy process (AHP) method at the second step. The range of standard values and the weighting values are also obtained by AHP. Grey classes are identified using the whitening weight function of the grey number. The evaluation system of the ecological green space is framed by grey clusters. We considered the factors of building environment and the scale of building sites in the ecological greenery of green building sites.This study proposes a new model to solve the problems hard to be quantified. Especially for those ecological benefits are too close to decide. Architects and landscape architects can input the engineering data and the design information into the ecological greenery assessment system. The identification and assessment system of green space is fit for Taiwan area. We will obtain the best greening project by the maximum value of absolute degree of grey incidence (max{varepsilon ( ij )}) in grey-decision making. The maximum value of synthetic clustering coefficient (max{sigma ( k )}) in grey clustering assessment reflects the quality and variation of green space.     

Principal component analysis of data for trace elements and main components in precipitation falling on Norway

Trace elements and the main components in precipitation were measured at three background sites in Norway. The work is based on weekly samples from 1989 and 1990. Principal component analysis was used to detect the covariation of the chemical components in the data set. Dominant factors are long-range atmospheric transport of anthropogenic components to Norway, crustal material, and marine sources. Different local sources also exist. The interpretation of seasonal variations in the data set is eased by studying the changes in the factor scores throughout the year. Distinct seasonal patterns are shown for some of the factors, in particular those representing soil dust and atmospheric transport from the marine environment.     

建设项目环境保护管理现状、问题及对策

主要介绍近年来全国建设项目环境管理的情况和问题,对出现的问题进行分析,并提出相应的建议。     

An eco-sustainable green approach for heavy metals management: two case studies of developing industrial region

Multifaceted issues or paradigm of sustainable development should be appropriately addressed in the discipline of environmental management. Pollution of the biosphere with toxic metals has accelerated dramatically since the beginning of the Industrial Revolution. In present review, comparative assessment of traditional chemical technologies and phytoremediation has been reviewed particularly in the context of cost-effectiveness. The potential of phytoremediation and green chemicals in heavy metals management has been described critically. Further, the review explores our work on phytoremediation as green technology during the last 6 years and hand in hand addresses the various ecological issues, benefits and constraints pertaining to heavy metal pollution of aquatic ecosystems and its phytoremediation as first case study. Second case study demonstrates the possible health implications associated with use of metal contaminated wastewater for irrigation in peri-urban areas of developing world. Our researches revealed wetland plants/macrophytes as ideal bio-system for heavy metals removal in terms of both ecology and economy, when compared with chemical treatments. However, there are several constraints or limitations in the use of aquatic plants for phytoremediation in microcosm as well as mesocosm conditions. On the basis of our past researches, an eco-sustainable model has been proposed in order to resolve the certain constraints imposed in two case studies. In relation to future prospect, phytoremediation technology for enhanced heavy metal accumulation is still in embryonic stage and needs more attention in gene manipulation area. Moreover, harvesting and recycling tools needs more extensive research. A multidisciplinary research effort that integrates the work of natural sciences, environmental engineers and policy makers is essential for greater success of green technologies as a potent tool of heavy metals management.     

Assessing the social cost of housing projects on the built environment: Analysis and monetization of the adverse impacts incurred on the neighbouring communities

Construction projects generate serious environmental adverse impacts on the adjacent residents. All those harmful consequences and damages that third parties or the community sustain due to the implementation of construction processes are called social costs. Although, the presence of social costs is widely mentioned in the literature, in the projects' initial cost estimation practices, the social costs are not estimated and included. Whereas since these costs are not compensated, problems can be emerged by the community. It is a truism that the majority of the models proposed to quantify the social costs have been concentrated on construction, repair, and maintenance of the infrastructure projects namely; utilities, roads, and highways. On the other hand, up to the present, a limited number of attempts has been made to quantify residential housing construction associated social costs. Thus, this research aims to expand and/or contribute to the existing body of knowledge via estimating how much social cost society surrounding residential housing construction sites are subjected to. For this purpose, a social cost estimation model is developed to assist industry professionals on how to estimate social costs in residential construction projects. The social cost estimation model is developed to provide guidance for phase by phase monetization of the residential construction associated social costs. In this paper, the model proposed for social cost estimation is validated via a case study in Turkey.     

Distribution of trace elements in certain ecological components and animal products in a dairy farm at Tirupati, Chittoor District, Andhra Pradesh, India

Biogeochemical characteristics of the cattle are dealt based on the observations made in Ayurveda in the light of modern scientific developments in applied environmental geochemistry. The biogeochemical characteristics of certain important ecological components and animal products of the stall-fed animals were studied. For this purpose, a dairy farm of Tirumala–Tirupati Devasthanams, a religious organization in Tirupati, Chittoor District, Andhra Pradesh was selected. This study is intended to trace out the trace element interactions in the ecological components (soil, water, fodder, feed) of the stall-fed animals and their output components viz. dung, urine and milk. Physical, physico-chemical properties and certain trace elements were determined for composite samples of ecological components and dung, urine, and milk of stall-fed animals. The variations in the distribution of pH and EC of urine and milk reflect the variations in their physico-chemical or hydro-chemical properties. As mentioned in Ayurveda, not only the properties of milk but also the properties of dung and urine reflect their diet and conditions of their habitat. Even though the diet is the same, the cows of different breeds yield milk of variable physical, physico-chemical properties and trace element composition which can be attributed to their body colour, substantiating Ayurveda.     

Co-occurrence profiles of trace elements in potable water systems: a case study

Potable water samples (N?=?74) from 19 zip code locations in a region of Greece were profiled for 13 trace elements composition using inductively coupled plasma mass spectrometry. The primary objective was to monitor the drinking water quality, while the primary focus was to find novel associations in trace elements occurrence that may further shed light on common links in their occurrence and fate in the pipe scales and corrosion products observed in urban drinking water distribution systems. Except for arsenic at two locations and in six samples, rest of the analyzed elements was below maximum contaminant levels, for which regulatory values are available. Further, we attempted to hierarchically cluster trace elements based on their covariances resulting in two groups; one with arsenic, antimony, zinc, cadmium, and copper and the second with the rest of the elements. The grouping trends were partially explained by elements’ similar chemical activities in water, underscoring their potential for co-accumulation and co-mobilization phenomena from pipe scales into finished water. Profiling patterns of trace elements in finished water could be indicative of their load on pipe scales and corrosion products, with a corresponding risk of episodic contaminant release. Speculation was made on the role of disinfectants and disinfection byproducts in mobilizing chemically similar trace elements of human health interest from pipe scales to tap water. It is warranted that further studies may eventually prove useful to water regulators from incorporating the acquired knowledge in the drinking water safety plans.     

The geographic distribution of trace elements in the environment: the REGARDS study

Research on trace elements and the effects of their ingestion on human health is often seen in scientific literature. However, little research has been done on the distribution of trace elements in the environment and their impact on health. This paper examines what characteristics among participants in the Reasons for Geographic and Racial Differences in Stroke (REGARDS) study are associated with levels of environmental exposure to arsenic, magnesium, mercury, and selenium. Demographic information from REGARDS participants was combined with trace element concentration data from the US Geochemical Survey (USGS). Each trace element was characterized as either low (magnesium and selenium) or high (arsenic and mercury) exposure. Associations between demographic characteristics and trace element concentrations were analyzed with unadjusted and adjusted logistic regression models. Individuals who reside in the Stroke Belt have lower odds of high exposure (4th quartile) to arsenic (OR 0.33, CI 0.31, 0.35) and increased exposure to mercury (OR 0.65, CI 0.62, 0.70) than those living outside of these areas, while the odds of low exposure to trace element concentrations were increased for magnesium (OR 5.48, CI 5.05, 5.95) and selenium (OR 2.37, CI 2.22, 2.54). We found an association between levels of trace elements in the environment and geographic region of residence, among other factors. Future studies are needed to further examine this association and determine whether or not these differences may be related to geographic variation in disease.     

Revealing EIA process-related barriers in transport projects: The cases of Italy,Portugal, and Spain

The effectiveness of Environmental Impact Assessment (EIA) in the transport field is increasingly being contested. Apart from technical issues (e.g., impacts measurements), the literature highlights process-related barriers as key obstacles to effective EIA implementation in transport projects (e.g., lack of collaborative work, transparency, etc.). Nevertheless, most academic efforts to date have focused on technical improvements, paying limited attention to the relevance of process-related barriers. To address this shortcoming, the paper aims to explore and compare how EIA is experienced and perceived by professionals in three South-European countries (Italy, Portugal, and Spain), providing additional insights into EIA process-related barriers in transport projects. The findings were obtained through an online survey of 294 professionals, representing two main stakeholder groups: environmental consultants and transport planners. The results reveal four main types of process problems shared in all three countries: (i) EIA timing, (ii) assessment of alternatives, (iii) monitoring system, and (iv) public participation. The highest divergences are seen in Spain, where 42% of identified process-related barriers are shared with the rest of countries, while Italian and Portuguese respondents agree in the perception of 68% of process-related barriers. The main differences between the barriers identified by transport planners and environmental consultants are related to their assessment of the need for more collaborative work between key actors. It is finally discussed the added value of this research to progress towards the homogenization of EIA processes across countries.     

Process analysis of poverty eradication in China: A case study on photovoltaic projects for poverty alleviation

Poverty eradication is a priority for governments worldwide. In this study, a process analysis was performed to rigorously examine poverty eradication in China. First, various stages of poverty eradication in China were identified, and the development of poverty eradication was reviewed to demonstrate the achievements and significant contribution to global poverty eradication. Second, using demographic information, the geographical distribution of rural and impoverished populations were analyzed to validate the positive correlation between them. Through the targeting process, significant geographical disparities of impoverished areas in China were clearly revealed, and the impoverished population was further identified. Third, the natural solar energy endowment was thoroughly analyzed to assess the applicability of solar photovoltaics in various areas. Policy development and the anticipated benefits of solar photovoltaic projects for poverty alleviation (PVPPA) were described and evaluated. Finally, China's experiences with PVPPA were discussed. The results indicate that there are some problems associated with the implementation of PVPPA regarding the policy and management schemes, technical support and logistics, and financial resources and assurance. Recommendations to overcome these problems are also discussed. China's PVPPA program introduced here provides valuable insights regarding poverty alleviation, especially regarding the targeting process, participatory development, and profit sharing, and may thus benefit societies worldwide.     

Mobility of selected trace elements in Mediterranean red soil amended with phosphogypsum: experimental study

Soil amendment by phosphogypsum (PG) application becomes of increasing importance in agriculture. This may lead, however, to soil, plant, and groundwater contamination with trace elements (TEs) inherently present in PG. Monitoring of selected TEs (Pb, Zn, Cu, and Cd) distribution and mobility in a Mediterranean red soil profile has been performed in soil parcels applied with PG over a 16-month period. Concentrations were measured in soil and plant samples collected from various depth intervals at different points in time. TEs sequential extraction was performed on soil and PG samples. Results showed soil profile enrichment peaked 5 months after PG application for Cd, and 12 months for Pb, Zn, and Cu. Rainwater, pH, total organic carbon, and cationic exchange capacity were the main controlling factors in TEs accumulation in soils. Cd was transferred to a soil depth of about 20 cm. Zn exhibited mobility towards deeper layers. Pb and Cu were accumulated in around 20-55-cm-deep layers. PG increased the solubility of the studied TEs; PG-applied soils contained TEs bound to exchangeable and acid-soluble fractions in higher percentages than reference soil. Pb, Zn, and Cu were sorbed into mineral soil phases, while Cd was mainly found in the exchangeable (bio-available) form. The order of TEs decreasing mobility was Zn > Cd > Pb > Cu. Roots and leaves of existed plants, Cichorium intybus L., accumulated high concentrations of Cd (1-2.4 mg/kg), exceeding recommended tolerable levels, and thus signifying potential health threats through contaminated crops. It was therefore recommended that PG should be applied in carefully established, monitored, and controlled quantities to agricultural soils.     

Assessment of online public opinions on large infrastructure projects: A case study of the Three Gorges Project in China

Public opinion becomes increasingly salient in the ex post evaluation stage of large infrastructure projects which have significant impacts to the environment and the society. However, traditional survey methods are inefficient in collection and assessment of the public opinion due to its large quantity and diversity. Recently, Social media platforms provide a rich data source for monitoring and assessing the public opinion on controversial infrastructure projects. This paper proposes an assessment framework to transform unstructured online public opinions on large infrastructure projects into sentimental and topical indicators for enhancing practices of ex post evaluation and public participation. The framework uses web crawlers to collect online comments related to a large infrastructure project and employs two natural language processing technologies, including sentiment analysis and topic modeling, with spatio-temporal analysis, to transform these comments into indicators for assessing online public opinion on the project. Based on the framework, we investigate the online public opinion of the Three Gorges Project on China's largest microblogging site, namely, Weibo. Assessment results present spatial-temporal distributions of post intensity and sentiment polarity, reveals major topics with different sentiments and summarizes managerial implications, for ex post evaluation of the world's largest hydropower project. The proposed assessment framework is expected to be widely applied as a methodological strategy to assess public opinion in the ex post evaluation stage of large infrastructure projects.     

Artificial Sampling Units: A Tool for Increasing the Sensitivity of Tests for Impact in Soft Sediments

The distribution of benthic organisms in soft sediments is patchy in time and space on many scales. Such variability makes assessment of ecological impacts difficult. Sediment-related variables, such as grain-size and organic content, which can affect colonization by infauna, vary over similar scales. Variations in characteristics of the sediment may contribute to spatial variability in infaunal assemblages, making it difficult to detect the putative impacts of disturbances, such as the production of boat-generated waves (wash), on these organisms. Here, the hypothesis that infaunal assemblages colonizing containers of homogeneous sedimentwould be less spatially variable than those colonizing natural sediment was tested. Containers were deployed at mudflats differing in exposure to wash. If wash does affect colonization, a reduction in variability among sites of similar exposure should enable stronger differences to be seen between wash and no-wash zones. Assemblages colonizing homogeneous sediment were less variable than those colonizing site-specific sediment. No difference in colonization was, however, seen between places differing in their exposure to wash. Nevertheless, this method is of use in the assessment of ecological impacts in sedimentary environments, where it is difficult to detect putative impacts above the great natural variability in assemblages.     

A review of EIAs on trade policy in China: Exploring the way for economic policy EIAs

During the discussion on the “Environmental Protection Law Amendment (draft)” in 2011, it was decided to drop the proposed clauses related to environmental impact assessments (EIAs) on policy, which means that there remained no provisions for policy EIAs, and China's strategic environmental assessment system stayed limited to the planning level. However, considering that economic policy making is causing significant direct and indirect environmental problems and that almost every aspect of governmental policy has an economic aspect, EIAs on economic policies are of the utmost urgency. The purpose of this study is to review the EIA work that has been carried out on trade policy in China through four case studies, and illustrate how trade policy EIAs can be helpful in achieving better environmental outcomes in the area of trade. Through the trade policy EIA case studies we try to argue for the feasibility of conducting EIAs on economic policies in China. We also discuss the implications of the case studies from the point of view of how to proceed with EIAs on economic policy and how to promote their practice.