A program-level management system for the life cycle environmental and economic assessment of complex building projects

Climate change has become one of the most significant environmental issues, of which about 40% come from the building sector. In particular, complex building projects with various functions have increased, which should be managed from a program-level perspective. Therefore, this study aimed to develop a program-level management system for the life-cycle environmental and economic assessment of complex building projects. The developed system consists of three parts: (i) input part: database server and input data; (ii) analysis part: life cycle assessment and life cycle cost; and (iii) result part: microscopic analysis and macroscopic analysis. To analyze the applicability of the developed system, this study selected ‘U’ University, a complex building project consisting of research facility and residential facility. Through value engineering with experts, a total of 137 design alternatives were established. Based on these alternatives, the macroscopic analysis results were as follows: (i) at the program-level, the life-cycle environmental and economic cost in ‘U’ University were reduced by 6.22% and 2.11%, respectively; (ii) at the project-level, the life-cycle environmental and economic cost in research facility were reduced 6.01% and 1.87%, respectively; and those in residential facility, 12.01% and 3.83%, respective; and (iii) for the mechanical work at the work-type-level, the initial cost was increased 2.9%; but the operation and maintenance phase was reduced by 20.0%. As a result, the developed system can allow the facility managers to establish the operation and maintenance strategies for the environmental and economic aspects from a program-level perspective.     

Comparative analysis of methods for integrating various environmental impacts as a single index in life cycle assessment

Previous studies have proposed several methods for integrating characterized environmental impacts as a single index in life cycle assessment. Each of them, however, may lead to different results. This study presents internal and external normalization methods, weighting factors proposed by panel methods, and a monetary valuation based on an endpoint life cycle impact assessment method as the integration methods. Furthermore, this study investigates the differences among the integration methods and identifies the causes of the differences through a case study in which five elementary school buildings were used. As a result, when using internal normalization with weighting factors, the weighting factors had a significant influence on the total environmental impacts whereas the normalization had little influence on the total environmental impacts. When using external normalization with weighting factors, the normalization had more significant influence on the total environmental impacts than weighing factors. Due to such differences, the ranking of the five buildings varied depending on the integration methods. The ranking calculated by the monetary valuation method was significantly different from that calculated by the normalization and weighting process. The results aid decision makers in understanding the differences among these integration methods, and, finally, help them select the method most appropriate for the goal at hand.     

Opportunity or threat in balancing social,economic and environmental impacts: The appearance of the Polar Silk Road

The potential of the Polar Silk Road (PSR) to accelerate the shipping trade is gaining importance because sea ice is currently melting in the Arctic region. Economic growth generates negative environmental and social impacts (TBL aspects); however, only a few studies have discussed the opportunities and threats in balancing TBL aspects. To fill this knowledge gap, this study addresses the opportunities and threats presented by the PSR. Nevertheless, information on the PSR is spread across diverse databases and is incomplete. This study utilizes a data-driven approach to handle these diverse databases and incomplete information and thereby to provide visual two- and three-dimensional impact analyses of opportunities and threats. This study contributes to the literature by (1) bridging TBL aspects of the PSR, (2) using a proposed hybrid method to address the aspect-balancing problem, and (3) providing insights on the opportunities and threats of the PSR. The results reveal negative effects of the PSR in terms of the balance between the economic and environmental aspects and that between the economic and social aspects. This study confirms that the scale and speed of development of the PSR pose a challenge to the environmental and social standards upheld by the surrounding countries and regions. Russia and the United Kingdom are ranked first and second in upholding these standards, while Germany, the Republic of Korea, the Netherlands and Norway strive to achieve a balance between the economic, social and environmental aspects.     

TiO2 nanoparticles influence on the environmental performance of natural and recycled mortars: A life cycle assessment

The World Meteorological Organization has recently reported that greenhouse gases have reached their highest level since 3–5 million years ago. A continuing rise would cause serious consequences e.g., rising temperatures, death of living beings, or water pollution. Cement is associated with those levels since its production encompasses around 8% of global CO₂ emissions. To increase the environmental performance of cementitious materials, different approaches could be followed, for instance, the reuse of waste materials such as recycled aggregate (RA) or the addition of TiO₂ nanoparticles due to its proactive effect during service life. However, no research has been found that examined the effect of nano-TiO₂ addition on recycled mortars in terms of environmental impact. Consequently, the main objective of this research is to evaluate the sustainability of TiO₂ nanoparticles in mortars made with either natural or recycled aggregate. Twelve mixtures with different percentages of nano-TiO₂ substitution (0%, 0.5%, 1%, 2% by the weight of cement) and RA replacement (0%, 50%, 100%) were studied. A life cycle assessment focused on material production (cradle-to-gate) was performed. The functional unit (FU) used was 1 m³ of mortar with a given compressive strength. The mix design was modified to meet the fixed strength defined in the FU. In terms of global warming potential, mortars with RA reduced the environmental impact when 0.5% of nano-TiO₂ was added. Considering waste generation and depletion of natural resources play a crucial role in the sustainability assessment of mortars with RA. Furthermore, when the compressive strength factor was considered in the FU, RA increased the total CO₂ emissions due to the higher amount of cement needed. Finally, despite the apparent harmful effect of nano-TiO₂ using a cradle-to-gate approach, these nanoparticles could highly enhance environmental performance due to their effects during service life.     

Renewable energy from solid waste: life cycle analysis and social welfare

In this study, municipal solid waste (MSW) composition in distinct world locations is compared and a case study is assessed. Three waste-to-energy (WtE) techniques are employed within the framework of an industrial partnership. Life cycle assessment (LCA) and a brief social contextualization including the production of renewable energy from the waste generated worldwide were held to attain a holistic view and attract the interest of multiple stakeholders.Incineration depicted a sustainable profile with improved results for global warming potential and terrestrial ecotoxicity potential. Regular gasification revealed the best results for eutrophication, acidification, marine aquatic ecotoxicity and human toxicity potential. Two-stage plasma gasification showed negative values for all impact categories i.e. achieving environmental credits. The estimate of the electricity produced from the waste generated per capita showed a fair coverage of the electrical demand in distinct world areas.To the best of the authors' knowledge, there are no reports connecting the electricity use, the waste production and the renewable energy achieved from WtE for different world regions. Therefore, this study supports the replacement of fossil fuels with renewable alternatives, reducing greenhouse gas emissions while maintaining the comfort and commodities suitable for a comfortable quality of life.     

Estimating the environmental and economic impacts of widespread adoption of potential technology solutions to reduce water use and pollution: Application to China's textile industry

Numerous technologies are emerging to reduce water use and pollution in China's textile industry, including several that are promoted by the China National Textile and Apparel Council as cleaner technologies in their five-year development guideline published in 2016. Though these technologies appear promising, the complexity of the industry makes it difficult to predict and compare the environmental and economic impacts of widespread adoption of these technologies. We draw on existing studies to estimate the potential scale of applicability of these technologies, and then estimate the potential economic and environmental benefits of encouraging their widespread adoption. Several of them, if implemented on a large scale, could drastically reduce water use and pollution with a payback of less than a year. Our approach to estimating the environmental and economic impacts of widespread adoption of promising technologies is also relevant for impact assessment in other complex industries with a wide range of products and processes.     

Assessment of potential impacts of municipal solid waste treatment alternatives by using life cycle approach: a case study in Vietnam

In Vietnam, most of municipal solid waste (MSW) is disposed of at open dumping and landfill sites, and the methane gas from waste is the un-ignorable source of greenhouse gas (GHG) emission. It is indispensable to explore the possibility for GHG mitigation in MSW management. The objective of this study was to estimate alternative waste treatment practices towards the GHG emission mitigation, energy consumption and generation, reduction of landfill volume, and various benefits for proposing the appropriate selection by scenario analyses for representative Vietnam’s cities. Impacts were calculated by utilizing life cycle assessment (LCA) method. A literature review survey on the current applicability of LCA database for assessing impacts from waste sector in developing countries, especially for Vietnam, was carried out. This study assessed the contribution of alternative solid waste treatment practices. The result showed that, except investment and operation costs, incineration with energy recovery seems the suitable alternative for treating waste from representative cities of Vietnam according to reduction of GHG emission and waste burden to landfill sites and energy recovery and generation. Besides, MSW composition was identified as an important factor directly influencing to impacts as well as other products and benefits of waste treatment alternatives. Reliable data on waste composition are indispensable for assessing to choose, improve, or plan the waste treatment practices towards sustainable development.     

Economic and environmental impacts of photovoltaic power with the declining subsidy rate in China

Photovoltaic (PV) power is expected to play an important role in reducing global warming and improving energy security. China promotes PV power development by implementing feed-in tariff policies. However, the economic and environmental impacts of substituting coal-fired electricity with PV power, particularly as the subsidy rate declines, are not well-known. This study estimates the economic and environmental impacts in different cases and scenarios by combining life-cycle assessment with input-output analysis. Results indicate that substituting PV power for coal-fired electricity has negative impacts on employment, household income, and tax revenue. Although this substitution can promote economic growth when PV power generation is subsidised, the impact of the substitution on GDP will gradually decline as the subsidy rate is reduced and finally becomes negative. Assuming that the levelized cost of PV power declines following the learning curve, the same results will hold even if PV power generation becomes profitable in the future. Despite its negative impacts on employment, household income and tax revenue, the substitution has huge external values. Therefore, policies are needed to internalise the external value and address the economic impacts of the substitution.     

Assessing cumulative impacts within state environmental review frameworks in the United States

Cumulative impact assessment (CIA) is the process of systematically assessing a proposed action's cumulative environmental effects in the context of past, present, and future actions, regardless of who undertakes such actions. Previous studies have examined CIA efforts at the federal level but little is known about how states assess the cumulative impacts of nonfederal projects. By examining state environmental review statutes, administrative rules, agency-prepared materials, and a national survey of the administrators of state environmental review programs, this study identifies the legal and administrative frameworks for CIA. It examines current CIA practice, discusses the relationship between CIA policy and its implementation, and explores the opportunities for improvement. The results of the study show that twenty-nine state environmental review programs across twenty-six states required the assessment of cumulative environmental impacts. More than half of these programs have adopted specific procedures for implementing their policies. Some programs assessed cumulative impacts using a standard review document, and others have created their own documentations incorporated into applications for state permits or funding. The majority of programs have adopted various scales, baselines, significance criteria, and coordination practices in their CIA processes. Mixed methods were generally used for data collection and analysis; qualitative methods were more prevalent than quantitative methods. The results also suggest that a program with comprehensive and consistent environmental review policies and procedures does not always imply extensive CIA requirements and practices. Finally, this study discusses the potential for improving existing CIA processes and promoting CIA efforts in states without established environmental review programs.     

A new market instrument for sustainable economic and environmental development

The regenerative capacity of ecosystems provides a regulatory basis for sustainable economic growth and development. A natural valuation of an ecosystem's services will arise in a market for developmental rights in the ecosystem using a unit of tradable 'right': E-Scrip. The amount of e-scrip needed for a development may be set by Environmental Assessment. The capacity of the ecosystem to regenerate with developmental pressure may be represented by an independent trader or Factor Proxy for the Environment who provides e-scrip to the market.     

The siting puzzle: Balancing economic and environmental gains and losses

Traditional approaches to the siting of potentially hazardous but regionally necessary facilities are often ineffective and lead to drawn-out legal disputes ultimately satisfactory to none of the parties. Research at MIT over the last decade has indicated five factors that may solve the siting puzzle. Application of these principles do not guarantee that a decision will not be disputed but may enhance the possibility of a wise and durable agreement.     

Life Cycle Assessment to support the quantification of the environmental impacts of an event

In recent years, several tools have been used to define and quantify the environmental impacts associated with an event; however, a lack of uniform approaches for conducting environmental evaluations has been revealed. The aim of this paper is to evaluate whether the Life Cycle Assessment methodology, which is rarely applied to an event, can be an appropriate tool for calculating the environmental impacts associated with the assembly, disassembly, and use phase of an event analysing in particular the components and the displays used to establish the exhibits. The aim is also to include the issues reported by ISO 20121:2012 involving the interested parties that can be monitored but also affected by the event owner, namely the event organiser, the workforce and the supply chain.A small event held in Northern Italy was selected as the subject of the research. The results obtained show that the main contributors are energy consumption for lighting and heating and the use of aluminium materials, such as bars for supporting the spotlights, carpet and the electronic equipment. A sensitivity analysis for estimating the effects of the impact assessment method chosen has also been conducted and an uncertainty analysis has been performed using the Monte Carlo technique. This study highlighted the importance of the energy consumed by heating and lighting on the environmental implications, and indicated that the preparation and assembly should always be considered when quantifying the environmental profile of an event.     

Arsenic speciation in freshwater snails and its life cycle variation

Terrestrial snails are consumed by humans occasionally and they are an important food source for many creatures including fish and birds. Little is known about arsenic speciation in these gastropods, let alone life cycle variations. Here we report on the arsenic speciation in freshwater snails from Pender Island and Vancouver Island, B.C., Canada, which was determined on methanol/water extracts (43-59% extraction efficiency) by using high performance liquid chromatography-inductively coupled plasma-mass spectrometry (HPLC-ICP-MS) and HPLC-electrospray tandem mass spectrometry. The tetramethylarsonium ion, oxo-arsenosugars and thio-arsenosugars are the main arsenic species encountered. Arsenobetaine, which is commonly found in the marine environment, is minor. Live bearing snails Viviparidae sp. from Pender Island were maintained in aquaria and the arsenic speciation in the unborn, newly born, and adult animals was monitored. Oxo-arsenosugars predominate in the adults, whereas thio-arsenosugars seem to predominate in juveniles, suggesting that these arsenicals are snail metabolites.     

Urban daily life routines and human exposure to environmental discomfort

This study suggests a shift in focus from studying environmental discomfort in urban strategic stations, from which average results for the city or specific results for selected sites are deduced, and from measuring environmental conditions in fixed monitoring stations to a study in which we monitor, with mobile portable sensors, the exposure of people to environmental sources of discomfort while performing their daily life activities. Significant variations in sense of discomfort were measured in this study, and almost half of this variability was found to be explained while four independent environmental variables were considered: air quality (concentrations of CO), noise level, climatic variables (thermal load), and social loads. The study conducted in the city of Tel Aviv, which suffers from hot, humid summers and cool winters, and noise levels that reach the average levels of 85 dB, and relatively lower levels of exposure to the other potential stressors. These levels of combined exposures result in moderate levels of discomfort for young, healthy people once they experience the more stressing environments in the city. It is shown also that noise from other people is the most salient source of discomfort in Tel Aviv. Levels of discomfort accumulate during the working hours, either due to the impact of social loads or noise, but the subjects showed good coping abilities that enabled them to recover in late afternoons. It seems that thermal load does not have immediate impact, but rather cumulative ones, mainly during transitional seasons when subjects are less adaptive to extreme changes in weather.