Investigating the impacts of crash prediction models on quantifying safety effectiveness of Adaptive Signal Control Systems

Introduction: Adaptive Signal Control System (ASCS) can improve both operational and safety benefits at signalized corridors. Methods: This paper develops a series of models accounting for model forms and possible predictors and implements these models in Empirical Bayes (EB) and Fully Bayesian (FB) frameworks for ASCS safety evaluation studies. Different models are validated in terms of the ability to reduce the potential bias and variance of prediction and improve the safety effectiveness estimation accuracy using real-world crash data from non-ASCS sites. This paper then develops the safety effectiveness of ASCS at six different corridors with a total of 65 signalized intersections with the same type of ASCS, in South Carolina. Results: Validation results show that the FB model that accounts for traffic volume, roadway geometric features, year factor, and spatial effects shows the best performance among all models. The study findings reveal that ASCS reduces crash frequencies in the total crash, fatal and injury crash, and angle crash for most of the intersections. The safety effectiveness of ASCS varies with different intersection features (i.e., AADT at major streets, number of legs at an intersection, the number of through lanes on major streets, the number of access points on minor streets, and the speed limit at major streets). Conclusions: ASCS is associated with crash reductions, and its safety effects vary with different intersection features. Practical Applications: The findings of this research encourage more ASCS deployments and provide insights into selecting ASCS deployment sites for reducing crashes considering the variation of the safety effectiveness of ASCS.     

Examining crash injury severity and barrier-hit outcomes from cable barriers and strong-post guardrails on Alabama’s interstate highways

Introduction: This study investigates the impact of several risk factors (i.e., roadway, driver, vehicle, environmental, and barrier-specific characteristics) on the injury severity resulting from barrier-related crashes and also on barrier-hit outcomes (i.e., vehicle containment, vehicle redirection, and barrier penetration). A total of 1,685 barrier-related crashes, which occurred on three major interstate highways (I-65, I-85, and I-20) in the state of Alabama, were collected for a seven-year period (2010–2016), and all relevant information from the police reports was reviewed. Features that were rarely explored before (e.g., median width, barrier length, barrier offset or lateral position, left shoulder width, blockout type, and number of cables) were also collected and examined. Two types of longitudinal barriers were analyzed: high-tension cable barriers installed on medians and strong-post guardrails installed on medians and/or roadsides. Method: Two separate mixed logit (MXL) models were used to analyze crash injury severity in median and roadside barrier-related crashes. Two additional MXL models were separately adopted for median and roadside barrier-related crashes to estimate the probability of three barrier-hit outcomes (vehicle containment, vehicle redirection, and barrier penetration). Results: The results of crash injury severity MXL models showed that, for both median and roadside barrier crashes, barrier penetration, female drivers, and driver fatigue were associated with a higher probability of injury or fatal crashes. The results of barrier-hit MXL models showed that longer barrier length, Brifen cable barrier system, and barrier lateral position were significant predictors of median barrier-hit outcomes, whereas dark lighting condition, driving under the influence (DUI), presence of curved freeway sections, and right shoulder width significantly contributed to roadside barrier-hit outcomes. Conclusions: The MXL model succeeded in identifying several contributing factors of crash severity and barrier-hit outcomes along Alabama’s interstate highways. Practical applications: One study application is to design longer barrier run length (greater than 1230 feet or 0.2 miles) to reduce the barrier penetration likelihood.     

Investigating the uniqueness of crash injury severity in freeway tunnels: A comparative study in Guizhou,China

Introduction: With the rapid development of transportation infrastructures in precipitous areas, the mileage of freeway tunnels in China has been mounting during the past decade. Provided the semi-constrained space and the monotonous driving environment of freeway tunnels, safety concerns still remain. This study aims to investigate the uniqueness of the relationships between crash severity in freeway tunnels and various contributory factors. Method: The information of 10,081 crashes in the entire freeway network of Guizhou Province, China in 2018 is adopted, from which a subset of 591 crashes in tunnels is extracted. To address spatial variations across various road segments, a two-level binary logistic approach is applied to model crash severity in freeway tunnels. A similar model is also established for crash severity on general freeways as a benchmark. Results: The uniqueness of crash severity in tunnels mainly includes three aspects: (a) the road-segment-level effects are quantifiable with the environmental factors for crash severity in tunnels, but only exist in the random effects for general freeways; (b) tunnel has a significantly higher propensity to cause severe injury in a crash than other locations of a freeway; and (c) different influential factors and levels of contributions are found to crash severity in tunnels compared with on general freeways. Factors including speed limit, tunnel length, truck involvement, rear-end crash, rainy and foggy weather and sequential crash have positive contributions to crash severity in freeway tunnels. Practical applications: Policy implications for traffic control and management are advised to improve traffic safety level in freeway tunnels.     

Identifying the crash characteristics on freeway segments based on different ramp influence areas

Objective: This study aimed to explore the relationship between crash types and different freeway segments and identify the factors contributing to crashes on different freeway segments. Unlike most of the previous studies on freeway segments, this study separately investigates basic freeway segments, single ramp influence segments, and multiple ramp influence segments.

Methods: Nonlinear canonical correlation analysis (NLCCA) and proportionality test were used to identify the relationship between crash types and different freeway segments. The data sets for the different freeway segments accumulated for this study consist of 9,867 crash samples with complete information on all 22 chosen variables. A multinomial logit model (MNL) was used to estimate the influence of crash factors on different freeway segments.

Results: The results show that weaving and diverge overlap influence segments (WD) are more likely to have injury or fatal crashes; diverge and diverge overlap influence segments (DD) are more likely to have property damage–only (PDO) crashes; merge and merge overlap influence segments (MM) are more likely to have sideswipe crashes; and WD have non-sideswipe crashes; WD and weaving overlap influence segments (MW) are more likely to have rear end crashes; and MM segments are less likely to have hit object crashes. The contributing factors are identified by MNL and the results show that different traffic variables, environmental variables, vehicle variables, driver variables, and geometric variables significantly affected the likelihood of crashes on different freeway segments.

Conclusions: Investigation of crash types and factors contributing to crashes on different freeway segments is based on multiple ramp influence segments, which can promote a better understanding of the safety performance of various freeway segments.     

Highway safety assessment and improvement through crash prediction by injury severity and vehicle damage using Multivariate Poisson-Lognormal model and Joint Negative Binomial-Generalized Ordered Probit Fractional Split model

Introduction: Predicting crash counts by severity plays a dominant role in identifying roadway sites that experience overrepresented crashes, or an increase in the potential for crashes with higher severity levels. Valid and reliable methodologies for predicting highway accidents by severity are necessary in assessing contributing factors to severe highway crashes, and assisting the practitioners in allocating safety improvement resources. Methods: This paper uses urban and suburban intersection data in Connecticut, along with two sophisticated modeling approaches, i.e. a Multivariate Poisson-Lognormal (MVPLN) model and a Joint Negative Binomial-Generalized Ordered Probit Fractional Split (NB-GOPFS) model to assess the methodological rationality and accuracy by accommodating for the unobserved factors in predicting crash counts by severity level. Furthermore, crash prediction models based on vehicle damage level are estimated using the same two methodologies to supplement the injury severity in estimating crashes by severity when the sample mean of severe injury crashes (e.g., fatal crashes) is very low. Results: The model estimation results highlight the presence of correlations of crash counts among severity levels, as well as the crash counts in total and crash proportions by different severity levels. A comparison of results indicates that injury severity and vehicle damage are highly consistent. Conclusions: Crash severity counts are significantly correlated and should be accommodated in crash prediction models. Practical application: The findings of this research could help select sound and reliable methodologies for predicting highway accidents by injury severity. When crash data samples have challenges associated with the low observed sampling rates for severe injury crashes, this research also confirmed that vehicle damage can be appropriate as an alternative to injury severity in crash prediction by severity.     

Influence of built environment and roadway characteristics on the frequency of vehicle crashes caused by driver inattention: A comparison between rural roads and urban roads

Introduction: With prevalent and increased attention to driver inattention (DI) behavior, this research provides a comprehensive investigation of the influence of built environment and roadway characteristics on the DI-related vehicle crash frequency per year. Specifically, a comparative analysis between DI-related crash frequency in rural road segments and urban road segments is conducted. Method: Utilizing DI-related crash data collected from North Carolina for the period 2013–2017, three types of models: (1) Poisson/negative binomial (NB) model, (2) Poisson hurdle (HP) model/negative binomial hurdle (HNB) model, and (3) random intercepts Poisson hurdle (RIHP) model/random intercepts negative binomial hurdle (RIHNB) model, are applied to handle excessive zeros and unobserved heterogeneity in the dataset. Results: The results show that RIHP and RIHNB models distinctly outperform other models in terms of goodness-of-fit. The presence of commercial areas is found to increase the probability and frequency of DI-related crashes in both rural and urban regions. Roadway characteristics (such as non-freeways, segments with multiple lanes, and traffic signals) are positively associated with increased DI-related crash counts, whereas state-secondary routes and speed limits (higher than 35 mph) are associated with decreased DI-related crash counts in rural and urban regions. Besides, horizontal curved and longitudinal bottomed segments and segments with double yellow lines/no passing zones are likely to have fewer DI-related crashes in urban areas. Medians in rural road segments are found to be effective to reduce DI-related crashes. Practical Applications: These findings provide a valuable understanding of the DI-related crash frequency for transportation agencies to propose effective countermeasures and safety treatments (e.g., dispatching more police enforcement or surveillance cameras in commercial areas, and setting more medians in rural roads) to mitigate the negative consequences of DI behavior.     

The impact of traffic barrier geometric features on crash frequency and injury severity of non-interstate highways

Introduction: The main objective of this research is to investigate the effect of traffic barrier geometric characteristics on crashes that occurred on non-interstate roads. Method: For this purpose, height, side-slope rate, post-spacing, and lateral offset of about 137 miles of traffic barriers were collected on non-interstate (state, federal aid primary, federal aid secondary, and federal aid urban) highways in Wyoming. In addition, crash reports recorded between 2008 and 2017 were added to the traffic barrier dataset. The safety performance of traffic barriers with regards to their geometric features was analyzed in terms of crash frequency and crash severity using random-parameters negative binomial, and random-parameters ordered logit models, respectively. Results: From the results, box beam barriers with a height of 27–29 inches were less likely to be associated with injury and fatal injury crashes compared to other barrier types. On the other hand, the likelihood of a severe injury crash was found to be higher for box beam barriers with a height taller than 31 inches. Both W-beam and box beam barriers with a post-spacing between 6.1 and 6.3 inches reduced the probability of severe injury crashes. In terms of the crash frequency, flare traffic barriers had a lower crash frequency compared to parallel traffic barriers. Non-interstate roads without longitudinal rumble strips were associated with a higher rate of traffic barrier crashes.     

Investigating the effects of monthly weather variations on Connecticut freeway crashes from 2011 to 2015

IntroductionThe objective of this research is to investigate the effects of monthly weather conditions on traffic crash experience on freeways, considering the interactions between weather, traffic volumes, and roadway conditions. Methods: Data from the state of Connecticut from 2011to 2015 were used. Random parameters negative binomial models with first-order, autoregressive covariance were estimated for representative types of freeway crashes (front-to-rear, sideswipe-same-direction, and fixed-object), most severe crashes (i.e., fatal and injury crashes), and non-injury crashes (i.e., property-damage-only crashes). Results: Major findings are that variations in monthly traffic volumes, roadway geometry, and weather conditions explain much of the variations in monthly traffic crashes. Time effects exist in the panel monthly data for all types of crashes. Taking into account this effect improves model prediction results. When the raw weather measures are highly correlated, using dimension reduction techniques helps to extract more interpretable weather factors. By considering the interaction effects between roadway condition variables, additional findings were found. In general, lower temperature, more heavy fog days, decreased precipitation, lower wind speed, higher monthly traffic volumes, and narrower inside shoulder were found to be associated with higher monthly crashes. The effects of area type and outside shoulder width change dramatically as the number of through lanes changes. Practical applications: The findings of this research could help researchers and general readers gain a better understanding of the effects of monthly weather conditions and other roadway factors on freeway crashes and give engineers practical guidelines on improving freeway safety.     

Exploring pedestrian injury severities at pedestrian-vehicle crash hotspots with an annual upward trend: A spatiotemporal analysis with latent class random parameter approach

Introduction: With the increasing trend of pedestrian deaths among all traffic fatalities in the past decade, there is an urgent need for identifying and investigating hotspots of pedestrian-vehicle crashes with an upward trend. Method: To identify pedestrian-vehicle crash locations with aggregated spatial pattern and upward temporal pattern (i.e., hotspots with an upward trend), this paper first uses the average nearest neighbor and the spatial autocorrelation tests to determine the grid distance and the neighborhood distance for hotspots, respectively. Then, the spatiotemporal analyses with the Getis-Ord Gi* index and the Mann-Kendall trend test are utilized to identify the pedestrian-vehicle crash hotspots with an annual upward trend in North Carolina from 2007 to 2018. Considering the unobserved heterogeneity of the crash data, a latent class model with random parameters within class is proposed to identify specific contributing factors for each class and explore the heterogeneity within classes. Significant factors of the pedestrian, vehicle, crash type, locality, roadway, environment, time, and traffic control characteristics are detected and analyzed based on the marginal effects. Results: The heterogeneous results between classes and the random parameter variables detected within classes further indicate the superiority of latent class random parameter model. Practical Applications: This paper provides a framework for researchers and engineers to identify crash hotspots considering spatiotemporal patterns and contribution factors to crashes considering unobserved heterogeneity. Also, the result provides specific guidance to developing countermeasures for mitigating pedestrian-injury at pedestrian-vehicle crash hotspots with an upward trend.     

Fatal pedestrian crashes on interstates and other freeways in the United States

Introduction: More than 800 pedestrians die annually in crashes on interstates and other freeways in the United States, but few studies have examined their characteristics. Method: Data from the Fatality Analysis Reporting System on pedestrians fatally injured during 2015–2017 were analyzed. Chi-square tests compared characteristics of pedestrians killed on interstates and other freeways with those that died on other roads, and across crash types among freeway deaths. Land use characteristics of locations where pedestrians were killed while crossing freeways in a large state (California) were identified using Google Earth. Results: A larger proportion of pedestrians killed on freeways died on dark and unlit roads (48% vs. 32%), were male (78% vs. 68%), or were ages 20–44 (55% vs. 32%) compared with pedestrians killed on other roads. Crossing (42%) was the most common crash type among pedestrian deaths on freeways, followed by disabled-vehicle-related crashes (18%). Pedestrians who died while crossing more often had blood alcohol concentrations ≥ 0.08 g/dL (40%) than those in disabled-vehicle-related (22%) or other crashes (34%). Deaths in crossing crashes were more likely than other freeway deaths to occur on urban roads (81%), at speed limits ≤50 mph (13%), or between 18:00 and 23:59 (49%), and 58% of crossing crashes analyzed for land use were located between residential and other (e.g., commercial, recreational) uses. Over a third (37%) of deaths in disabled-vehicle-related crashes occurred at speed limits ≥70 mph. Conclusions: A surprising proportion of pedestrian deaths occur on controlled-access roads not designed for walking. Countermeasures for these crashes need to be implemented to see meaningful reductions in pedestrian fatalities overall. Practical applications: Improving roadway and vehicle lighting, requiring reflective warning devices for marking disabled vehicles, constructing pedestrian overpasses and underpasses in areas frequently crossed, and promoting alternative means of traveling between residential and commercial areas could help.     

Statistical modeling of cargo tank truck crashes: Rollover and release of hazardous materials

Introduction: Cargo Tank Trucks (CTTs) are a primary surface transportation carrier of hazardous materials (hazmat) in the United States and CTT rollover crashes are the leading cause of injuries and fatalities from hazmat transportation incidents. CTTs are susceptible to rollover crashes because of their size, distribution of weight, a higher center of gravity, and the surging and sloshing of liquid cargo during transportation. This study identified and quantified the effects of various factors on the probability of rollover and release of hazmat in traffic crashes where a CTT was involved. Method: Bayesian Model Averaging (BMA)-based logistic regression models were estimated with rollover and hazmat release as the binary response variables, and crash, truck, roadway, environment, and driver characteristics as the explanatory variables. 2010–2016 police-reported CTT-involved crash data from Nebraska and Kansas was utilized. Receiver Operating Characteristic (ROC) curves confirmed appropriateness of the modeling approach for inference and prediction on the crash dataset. Results: CTTs are more likely to rollover in crashes while turning and changing lanes relative to going straight; side impacts (side collisions) and severe crosswinds increased the likelihood of rollovers; tractor and semi-trailer body style decreased the probability of rollover, while truck tractors are more prone to rollovers; collisions with fixed objects and higher posted speeds increased the rollover probability; rollovers and intersection crash locations increased the likelihood of hazmat release. Conclusions: The findings can assist stakeholders (policy-makers, private shippers, and CTT drivers) in restricting CTTs’ operations for safety; scheduling, routing, and fleet planning; and low-level decision-making (e.g., emergency stopping or local routing). Practical Applications: This study identified and quantified the effects of different factors on the conditional probability of rollover and release of hazmat in CTT-involved crashes. The findings may assist stakeholders in decision-making towards safe operations of CTTs for transportation of hazmat.     

Using naturalistic driving study data to investigate the impact of driver distraction on driver's brake reaction time in freeway rear-end events in car-following situation

IntroductionThe rear-end crash is one of the most common freeway crash types, and driver distraction is often cited as a leading cause of rear-end crashes. Previous research indicates that driver distraction could have negative effects on driving performance, but the specific association between driver distraction and crash risk is still not fully revealed. This study sought to understand the mechanism by which driver distraction, defined as secondary task distraction, could influence crash risk, as indicated by a driver's reaction time, in freeway car-following situations.MethodA statistical analysis, exploring the causal model structure regarding drivers’ distraction impacts on reaction times, was conducted. Distraction duration, distraction scenario, and secondary task type were chosen as distraction-related factors. Besides, exogenous factors including weather, visual obstruction, lighting condition, traffic density, and intersection presence and endogenous factors including driver age and gender were considered.ResultsThere was an association between driver distraction and reaction time in the sample freeway rear-end events from SHRP 2 NDS database. Distraction duration, the distracted status when a leader braked, and secondary task type were related to reaction time, while all other factors showed no significant effect on reaction time.ConclusionsThe analysis showed that driver distraction duration is the primary direct cause of the increase in reaction time, with other factors having indirect effects mediated by distraction duration. Longer distraction duration, the distracted status when a leader braked, and engaging in auditory-visual-manual secondary task tended to result in longer reaction times.Practical applicationsGiven drivers will be distracted occasionally, countermeasures which shorten distraction duration or avoid distraction presence while a leader vehicle brakes are worth considering. This study helps better understand the mechanism of freeway rear-end events in car-following situations, and provides a methodology that can be adopted to study the association between driver behavior and driving features.     

Effect of age and secondary task engagement on motor vehicle crashes in a naturalistic setting

ProblemAutomobile crashes are one of the leading causes of death in the United States, especially for younger and older drivers. Additionally, distracted driving is another leading factor in the likelihood of crashes. However, there is little understanding about the interaction between age and secondary task engagement and how that impacts crash likelihood and maneuver safety.MethodData from the Naturalistic Driving Study (NDS), which was part of the Second Strategic Highway Research Program (SHRP2), were used to investigate this issue.ResultsIt was found that the distribution of crashes per one million km driven during the NDS was similar to previous research, but with fewer crashes from older drivers. Additionally, it was found that older and middle-aged drivers engaged in distracted driving more frequently than was expected, and that crashes were significantly more likely if drivers of those age groups were engaged in secondary tasks. However, secondary task engagement did not predict judgment of safe/unsafe vehicle maneuvers.Practical ApplicationsMore research is needed to better understand the interaction of age and distraction on crash likelihood. However, this research could aid future researchers in understanding the likelihood of future use of new in-vehicle technologies for different age groups, as well as provide insight to the engagement patterns of distraction for different age groups.     

A conceptual framework to understand the role of built environment on traffic safety

IntroductionMany U.S. cities have adopted the Vision Zero strategy with the specific goal of eliminating traffic-related deaths and injuries. To achieve this ambitious goal, safety professionals have increasingly called for the development of a safe systems approach to traffic safety. This approach calls for examining the macrolevel risk factors that may lead road users to engage in errors that result in crashes. This study explores the relationship between built environment variables and crash frequency, paying specific attention to the environmental mediating factors, such as traffic exposure, traffic conflicts, and network-level speed characteristics. Methods: Three years (2011–2013) of crash data from Mecklenburg County, North Carolina, were used to model crash frequency on surface streets as a function of built environment variables at the census block group level. Separate models were developed for total and KAB crashes (i.e., crashes resulting in fatalities (K), incapacitating injuries (A), or non-incapacitating injuries (B)) using the conditional autoregressive modeling approach to account for unobserved heterogeneity and spatial autocorrelation present in data. Results: Built environment variables that are found to have positive associations with both total and KAB crash frequencies include population, vehicle miles traveled, big box stores, intersections, and bus stops. On the other hand, the number of total and KAB crashes tend to be lower in census block groups with a higher proportion of two-lane roads and a higher proportion of roads with posted speed limits of 35 mph or less. Conclusions: This study demonstrates the plausible mechanism of how the built environment influences traffic safety. The variables found to be significant are all policy-relevant variables that can be manipulated to improve traffic safety. Practical Applications: The study findings will shape transportation planning and policy level decisions in designing the built environment for safer travels.     

Improvement of the performance of animal crossing warning signs

Introduction: Animal–vehicle collisions (AVCs) can result in serious injury and death to drivers, animals' death, and significant economic costs. However, the cost effectiveness of the majority of AVC mitigation measures is a significant issue. Method: A mobile-based data collection effort was deployed to measure signs under the Utah Department of Transportation's (UDOT) jurisdiction. The crash data were obtained from the UDOT risk management database. ArcGIS was employed to link these two data sets and extract animal-related crashes and signs. An algorithm was developed to process the data and identify AVCs that occurred within sign recognition distance. Kernel density estimation (KDE) technique was applied to identify potential crash hotspots. Results: Only 2% of AVCs occurred within the recognition distance of animal crossing signs. Almost 58% of animal-related crashes took place on the Interstate and U.S. highways, wherein only 30% of animal crossing signs were installed. State routes with a higher average number of signs experienced a lower number of AVCs per mile. The differences between AVCs that occurred within versus outside of sign recognition distance were not statistically significant regarding crash severity, time of crash, weather condition, driver age, vehicle speed, and type of animal. It is more likely that drivers become accustomed to deer crossing signs than cow signs. Conclusions: Based on the historical crash data and landscape structure, with attention given to the low cost safety improvement methods, a combination of different types of AVC mitigation measures can be developed to reduce the number of animal-related crashes. After an in-depth analysis of AVC data, warning traffic signs, coupled with other low cost mitigation countermeasures can be successfully placed in areas with higher priority or in critical areas. Practical applications: The findings of this study assist transportation agencies in developing more efficient mitigation measures against AVCs.     

Investigating hazardous factors affecting freeway crash injury severity incorporating real-time weather data: Using a Bayesian multinomial logit model with conditional autoregressive priors

Introduction: It has been demonstrated that weather conditions have significant impacts on freeway safety. However, when employing an econometric model to examine freeway crash injury severity, most of the existing studies tend to categorize several different adverse weather conditions such as rainy, snowy, and windy conditions into one category, “adverse weather,” which might lead to a large amount of information loss and estimation bias. Hence, to overcome this issue, real-time weather data, the value of meteorological elements when crashes occurred, are incorporated into the dataset for freeway crash injury analysis in this study. Methods: Due to the possible existence of spatial correlations in freeway crash injury data, this study presents a new method, the spatial multinomial logit (SMNL) model, to consider the spatial effects in the framework of the multinomial logit (MNL) model. In the SMNL model, the Gaussian conditional autoregressive (CAR) prior is adopted to capture the spatial correlation. In this study, the model results of the SMNL model are compared with the model results of the traditional multinomial logit (MNL) model. In addition, Bayesian inference is adopted to estimate the parameters of these two models. Result: The result of the SMNL model shows the significance of the spatial terms, which demonstrates the existence of spatial correlation. In addition, the SMNL model has a better model fitting ability than the MNL model. Through the parameter estimate results, risk factors such as vertical grade, visibility, emergency medical services (EMS) response time, and vehicle type have significant effects on freeway injury severity. Practical Application: According to the results, corresponding countermeasures for freeway roadway design, traffic management, and vehicle design are proposed to improve freeway safety. For example, steep slopes should be avoided if possible, and in-lane rumble strips should be recommended for steep down-slope segments. Besides, traffic volume proportion of large vehicles should be limited when the wind speed exceeds a certain grade.     

Investigation of injury severities in single-vehicle crashes in North Carolina using mixed logit models

IntroductionRoadway departure (RwD) crashes, comprising run-off-road (ROR) and cross-median/centerline head-on collisions, are one of the most lethal crash types. According to the FHWA, between 2015 and 2017, an average of 52 percent of motor vehicle traffic fatalities occurred each year due to roadway departure crashes. An avoidance maneuver, inattention or fatigue, or traveling too fast with respect to weather or geometric road conditions are among the most common reasons a driver leaves the travel lane. Roadway and roadside geometric design features such as clear zones play a significant role in whether human error results in a crash. Method: In this paper, we used mixed-logit models to investigate the contributing factors on injury severity of single-vehicle ROR crashes. To that end, we obtained five years' (2010–2014) of crash data related to roadway departures (i.e., overturn and fixed-object crashes) from the Federal Highway Administration's Highway Safety Information System Database. Results: The results indicate that factors such as driver conditions (e.g., age), environmental conditions (e.g., weather conditions), roadway geometric design features (e.g., shoulder width), and vehicle conditions significantly contributed to the severity of ROR crashes. Conclusions: Our results provide valuable information for traffic design and management agencies to improve roadside design policies and implementing appropriately forgiving roadsides for errant vehicles. Practical applications: Our results show that increasing shoulder width and keeping fences at the road can reduce ROR crash severity significantly. Also, increasing road friction by innovative materials and raising awareness campaigns for careful driving at daylight can decrease the ROR crash severity.     

Near crash characteristics among risky drivers using the SHRP2 naturalistic driving study

Problem: Previous research have focused extensively on crashes, however near crashes provide additional data on driver errors leading to critical events as well as evasive maneuvers employed to avoid crashes. The Strategic Highway Research Program 2 (SHRP2) Naturalistic Driving Study contains extensive data on real world driving and offers a reliable methodology to study near crashes. The current study utilized the SHRP2 database to compare the rate and characteristics associated with near crashes among risky drivers. Methods: A subset from the SHRP2 database consisting of 4,818 near crashes for teen (16–19 yrs), young adult (20–24 yrs), adult (35–54 yrs), and older (70+ yrs) drivers was used. Near crashes were classified into seven incident types: rear-end, road departure, intersection, head-on, side-swipe, pedestrian/cyclist, and animal. Near crash rates, incident type, secondary tasks, and evasive maneuvers were compared across age groups. For rear-end near crashes, near crash severity, max deceleration, and time-to-collision at braking were compared across age. Results: Near crash rates significantly decreased with increasing age (p < 0.05). Young drivers exhibited greater rear-end (p < 0.05) and road departure (p < 0.05) near crashes compared to adult and older drivers. Intersection near crashes were the most common incident type among older drivers. Evasive maneuver type did not significantly vary across age groups. Near crashes exhibited a longer time-to-collision at braking (p < 0.01) compared to crashes. Summary: These data demonstrate increased total near crash rates among young drivers relative to adult and older drivers. Prevalence of specific near crash types also differed across age groups. Timely execution of evasive maneuvers was a distinguishing factor between crashes or near crashes. Practical Applications: These data can be used to develop more targeted driver training programs and help OEMs optimize ADAS to address the most common errors exhibited by risky drivers.     

Inclusion of phone use while driving data in predicting distraction-affected crashes

Introduction: Given the tremendous number of lives lost or injured, distracted driving is an important safety area to study. With the widespread use of cellphones, phone use while driving has become the most common distracted driving behavior. Although researchers have developed safety performance functions (SPFs) for various crash types, SPFs for distraction-affected crashes are rarely studied in the literature. One possible reason is the lack of critical distracted behavior information in the commonly used safety data (i.e., roadway inventory, traffic, and crash counts). Recently, the frequency of phone use while driving (referred to as phone use data) is recorded by mobile application companies and has become available to safety researchers. The primary objective of this study is to examine if phone use data can potentially predict distracted-affected crashes. Method: The authors first integrated phone use data with roadway inventory, traffic, and crash data in Texas. Then, the Random Forest (RF) algorithm was applied to assess the significance of the feature - phone use while driving - for predicting the number of distraction-affected crashes on a road segment. Further, this study developed two SPFs for distraction-affected crashes with and without the phone use data, separately. Both SPFs were assessed in terms of model fitting and prediction performances. Results: RF results rank the frequency of phone use as an important factor contributing to the number of distraction-affected crashes. Performance evaluations indicated that the inclusion of phone use data in the SPFs consistently improved both fitting and prediction abilities to predict distracted-affected crashes. Practical Applications: The phone use data provide new insights into the safety analyses of distraction-affected crashes, which cannot be achieved by only using the conventional roadway inventory and crash data. Therefore, safety researchers and practitioners are encouraged to incorporate the emerging data sources in reducing distraction-affected crashes.