Practices,attitudes and motives for domestic waste recycling

SUMMARY

Solid household waste management in Malaysia has reached a critical stage. Increasing population, urbanization and changing patterns of lifestyle have instigated the phenomenon. The 15 000 tonnes of garbage produced daily are thrown into 230 landfills nationwide, where 80% of them have only two years of life span left. Although recycling programmes were launched as early as 1990, only 5% of the wastes are recycled. The purpose of the present research was to ascertain the current management of household solid waste, attitude and motivational factors towards recycling. Data were collected using interview survey on 150 households in an urban residential area. The findings demonstrated that the respondents had very low awareness and knowledge regarding local domestic waste management. Separation of organic and non-organic wastes was rarely practised by 76% of the respondents. Most waste was thrown away, except for newspaper and aluminium cans which were regularly recycled, while furniture, and electrical items were reused by giving away or trading-in. The attitude of the respondents towards recycling was modest. Of the five motivational factors, intrinsic satisfaction and individual commitment were more important reasons for recycling than convenience, economic motivation and societal commitment. The results of the study indicated that, in order to overcome the solid waste crisis, the conscience of the individual needs to be raised through environmental awareness and concern, inculcation of sustainable consumption practices and education on waste management.     

Will unit‐pricing enhance recycling?

Unit pricing is a program in solid waste management that integrates market instruments to encourage households to reduce waste generation and increase recycling. Many studies have shown that unit pricing is effective, especially when the evaluation is based on comparing outcomes before and after implementation. In this paper, we use the so-called difference-in-differences approach to evaluate unit pricing. This approach can provide a less-biased estimation, and can help to examine whether a unit pricing program generates less waste and higher recycling or results in illegal dumping in neighboring regions. Using the fee-per-bag program implemented in Taipei City, Taiwan, as a case study, we found that unit pricing does reduce the amount of garbage but its impact on recycling is not as significant as the current literature suggests. Moreover, the program causes a serious negative externality: more than 60%?of the garbage reduction in the city is due to increased dumping of waste in neighboring regions. As the impact of unit‐pricing on recycling is limited, policy-makers cannot rely solely on this program to enhance recycling in the management of municipal solid waste.     

Life cycle assessment of food waste home composting in Greece

Home composting is a waste prevention measure related to the management of the household's food waste, garden trimmings, and other smaller organic household waste streams. Thus, home composting is an alternative way of exploitation of the “biomass” generated from the households. It is an alternative to centralized composting. Biomass utilization is explicitly stated as a principle of green chemistry. The aim of this paper is presentation of the results of a case study dealing with the life cycle environmental assessment of home composting of food waste in households in Greece. The results of the study indicate that home composting is environmentally preferable over the current organic waste management situation in Greece.     

Evaluation of recycling waste materials and by-products in highway construction

SUMMARY

The generation, handling, and safe disposal of waste materials has become a major concern in North America. Approval of facilities for waste processing and proper disposal is becoming more difficult to obtain. Furthermore, there is a growing public awareness of the importance of conserving and preserving our valuable natural resources. This expanding awareness has given rise to the trend towards recycling or reuse of awide variety of solid wastes. Experiences with using waste materials in highway construction can vary considerably, depending on material characteristics, construction processes, and climatic differences. A number of waste materials may be suitable for use in highway construction, but others may not. The objective of this paper is introduced in two tasks. The first is to include a survey of the waste materials and by-products that have been used successfully, or may be used, as materials for highway construction or maintenance work. This also includes determination of the state of practice concerning economic and technical factors for these wastes. The second is to rank these materials based on three criteria: number of uses by State agencies, economic uses and performance aspects.     

Recycling behaviour and attitude: the case of the Hong Kong people and commercial and household wastes

The increasing environmental awareness caused by the green movement has led to changes in attitude towards our traditionally wasteful society. Recent surveys in Hong Kong have shown that waste recycling has gained increasing verbal support among its citizens. This paper reports on recent findings which reveals that some discrepancies exist between people's attitude and behaviour towards waste recycling. The implication of this phenomenon on how and when a waste recycling policy should be carried out is considerable. Two major types of barriers to waste recycling and reduction were evident. Technical barriers to recycling included lack of appropriate information, lack of conveniently located bins and of temporary storage space, whilst the most critical barrier to paper waste recycling was the presence of non-recyclable materials in some paper items. Psychological barriers included the attitude of being troubled, and that too little waste was involved to be worth the effort. Technical barriers were found to dominate in commercial paper waste recycling, and can usually be overcome while psychological barriers were more significant in household waste recycling and are more difficult to solve. Thus, it might be concluded that, if a large scale household waste recycling programme were in place in Hong Kong, more effort should be devoted towards educating the public, to eliminate as many psychological barriers as possible. Findings from attitude surveys on recycling can provide valuable information for policy makers. However, a review of the literature indicates that findings from attitudinal and self-reported behavioural surveys may exaggerate the proportion of those who have a favourable attitude towards the surveyed subject matter. Thus, it is prudent for policy makers to consider the response rate of the surveys also.     

Assessment of key parameters in municipal solid waste management: a prerequisite for sustainability

Municipal solid waste management was studied for 1 year in a representative urban area of Lahore city for environmental sustainability. The effects of financial status of the household and the seasonal variations on generation rate and compositions of municipal solid waste (MSW) were determined. MSW generation rate and the economic status of the households were positively correlated (p < 0.05). Seasonal variations observed were significant only for organics (p = 0.001), plastics (p = 0.008) and food waste fractions (p = 0.009) in MSW. Response surface regression model developed and analysed by Minitab-15® showed that the interaction of season and different economic zones of the town on the MSW generation rate was non-significant (p = 0.334). Elemental and heating value analyses of the mixed organic fractions in kitchen waste had carbon 47.93%, hydrogen 6.20%, nitrogen 2.24%, sulphur 0.23%, oxygen 39.01%, and C and N ratio 27.78. Findings concluded that food waste was 56% of total MSW with 71.03% moisture content and a modest heating value of 5566 J/g. Existing temporary storage capacity of MSW is 51% of the total MSW generated considering the weighted MSW generation rate of 0.57 kg/person/day calculated in this study. Composting could be a possible final disposal option due to high moisture and organic content and can be studied in future research. Development of a transfer station, introduction of home composting programmes and awareness towards proper segregation and reduction of waste at the household level is suggested to attain sustainability in the MSW management system.     

Industrial solid waste flow analysis of eco-industrial parks: implications for sustainable waste management in China

Sustainable waste management in the industrial ecology perspective brings enormous challenges to the existing methodology of waste analysis at the industrial park (IP) scale. In this study, a four-step method was proposed for industrial solid waste (ISW) flow analysis of eco-industrial parks (EIPs) and applied to two IPs in eastern China. According to a park-wide census of 619 industrial enterprises and 105 questionnaires by a survey from 2006 to 2008, the results indicated that: 1) at the enterprise scale, more than 60% of enterprises were small-ISW-generation enterprises which encountered great difficulties on effective waste management; 2) at the IP scale, though the two IPs have set up their own environmental management systems and passed the ISO 14001 certification, the efficiencies of the ISW management systems have yet to be improved in the industrial ecology perspective; and 3) at the regional scale, more than 97% of ISW flowed within the provincial region, indicating that the provincial governments prevented the wastes from flowing into their own “back yard”. Effective waste management should be placed in a broader perspective. Approaches to sustainable waste management may include wastes exchange, efficient waste and information flow, virtual EIP, waste minimization clubs and regionalization of waste management.     

Repercussions of COVID-19 pandemic on solid waste generation and management strategies

• Implication of COVID-19 on medical waste and MSW generation is studied. • Challenges and effective strategy of solid waste generation is reviewed. • 2.9 million tons of COVID-19 related medical waste has been generated until Sep. 22. • The pandemic has postponed policies related to the reduction of plastic use. • Blockade resulted in a significant drop in waste generation in some regions. It has been over ten months since the beginning of the 2019 coronavirus disease (COVID-2019), and its impact on solid waste management, especially medical waste, is becoming clearer. This study systematically reviews the potential influences of the COVID-19 pandemic on medical waste, personal protection equipment waste and municipal solid waste (MSW), and discusses the corresponding measures and policies of solid waste management in typical countries. The results show that the generation of medical waste from the pandemic increased significantly, with 18%‒425% growth. It is estimated that the daily output of COVID-19 medical waste increased from 200 t/d on Feb. 22 to over 29000 t/d at the end of September 2020 throughout the world. The use of personal protective equipment will continue to grow in the long-term, while the blockade and isolation measures greatly reduced the volume of commercial waste, especially for tourist cities, and part of this waste was transferred to household waste. Residents’ attitudes and behavior toward food waste have changed due to the COVID-19 pandemic. In response to the pandemic, international organizations and several countries have issued new policies and guidelines and adjusted their management strategies for medical waste and MSW treatment. The pandemic has brought specific challenges to the disposal capacity of medical waste worldwide. It has also brought about the stagnation of policies related to the reduction of plastic products and waste recycling. This study will provide some useful information for managers and governmental officials on effective solid waste management during and after the COVID-19 pandemic.     

Hazardous waste management in educational and research centers: a case study

The hazardous waste management (HWM) practice at Tehran University of Medical Sciences Central Campus, Iran, was investigated in this study. Four schools were selected and the required information such as type and amount of wastes, temporary storage methods, waste discharge frequency, and final waste disposal methods using sampling, questionnaires, interviews with laboratory staff, and reference to available documents were gathered. The quantity of hazardous waste generation per year excluding the uncontrolled wastewater was found to be 2.072 tons per year. The obtained results show that wastes having features of being infectious, toxic, ignitable, carcinogenic, corrosive, and reactive were present at 32%, 28%, 16%, 14%, 8%, and 2%, respectively. In the central campus, hazardous solid wastes managed with household solid wastes and hazardous liquid waste were discharged into the sinks without any kind of control; improper HWM practices are evident from the point of waste production to final disposal.     

宁波市常用家电产品回收回用调查分析

通过对宁波市居民的家电产品系列问题的随即抽样问卷调查,阐述了宁波家电拥有量、使用寿命、更新原因和速率、居民购买家电和处理废旧家电时环保意识和行为,了解了本地区废旧家电的基本情况以及废旧家电处理的途径,在对调查数据进行分析的基础上,给出了结论和建议。     

The Economics of Household Solid Waste Generation and Disposal

We develop a household production model of waste management that explicitly incorporates many of the technical and behavioral elements germane to current regulatory and non-regulatory solid waste policy initiatives. Examination of first-order conditions shows the interaction among household preferences, these production options, and external prices and fees. A simplified simulation of our model illustrates these relationships, showing that household response elasticities can vary widely over common price ranges and that relatively large household welfare gains may be obtained by adopting curbside recycling and unit pricing programs.     

废塑料资源化产品对土壤中过氧化氢酶和脲酶活性的影响(Effect of Waste Plastics Recycling Products on Activities of Soil Catalase and Urease)

为探讨废塑料资源化产品对土壤酶活性的影响,通过室内培养试验研究了废塑料资源化产品暴露后土壤中过氧化氢酶和脲酶活性的变化.结果表明:废塑料资源化产品对土壤酶活性具有显著影响.250mg·kg-1、1250mg·kg-1、7250mg·kg-1废塑料资源化产品浓度处理对土壤中过氧化氢酶和脲酶影响明显不同.在土壤培养l～5d内,添加废塑料资源化产品的3个浓度处理土壤中过氧化氢酶活性显著低于对照(p<0.05),表现出明显的抑制作用,且浓度越高抑制作用越强.而后(5～35d),低浓度(250mg·kg-1)废塑料资源化产品对土壤过氧化氢酶一直表现为激活作用,但是,高浓度(1250mg·kg-1和7250mg·kg-1)处理对土壤过氧化氢酶活性则表现为激活-抑制-激活作用,且抑制、激活程度与处理浓度成呈相关.3个废塑料资源化产品浓度处理对脲酶活性影响在培养1～28d内主要是激活作用,且激活作用随着处理浓度的增大而增强,而后(28～35d)对脲酶活性表现为抑制作用.     

中国废电池管理对策分析

针对废电池管理体系中存在的管理法规不完善,回收体系不健全,适宜的管理运行机制等问题,探讨了如何加强废电池环境无割化管理的方法,提出加强管理法规建设、完善废电池自愿、强制回收体系、     

Region-gridding recycling of bulk organic waste: Emerging views based on coordinated urban and rural development

Bulk organic waste (BOW) has a large output in China. The improper disposal of BOW will not only bring serious environmental pollution, but also cause waste of biomass resources. The viewpoint proposes a region-gridding recycling management system of BOW that highlights the coordinated development of environmental, agricultural and energy elements in urban and rural areas. The viewpoint aims to drive the upstream and downstream industrial chains of BOW treatments, avoid the repeated construction of resource facilities, guide the upgrading of resource-based technologies, promote the professionalization of farmers, and thus built the high-quality modern agricultural recycling industrial park based on system management.     

Review of fly ash inertisation treatments and recycling

Fly ash (FA) is a by-product of power, and incineration plants operated either on coal and biomass, or on municipal solid waste. FA can be divided into coal fly ash, obtained from power plant burning coal, flue gas desulphurisation FA, that is, the by-product generated by the air pollution control equipment in coal-fired power plants to reduce the release of SO₂, biomass FA produced in the plants for thermal conversion of biomass and municipal solid waste incineration (MSWI) FA, that is, the finest residue obtained from the scrubber system in a MSWI plant. Because of the large amount produced in the world, fly ash is now considered the world’s fifth largest material resource. The composition of FA is very variable, depending on its origins; then, also pollutants can be very different. In this frame, it is fundamental to exploit the chemical or physical potentials of FA constituents, thus rendering them second-life functionality. This review paper is addressed to FA typology, composition, treatment, recycling, functional reuse and metal and organic pollutants abatement. Because of the general growing of environmental awareness and increasing energy and material demand, it is expected that increasing recycling rates will reduce the pressure on demand for primary raw materials, help to reuse valuable materials which would otherwise be wasted and reduce energy consumption and greenhouse gas emissions from extraction and processing.     

The socially optimal recycling rate: Evidence from Japan

This paper estimates the average social cost of municipal waste management as a function of the recycling rate. Social costs include all municipal costs and revenues, costs to recycling households to prepare materials estimated with an original method, external disposal costs, and external recycling benefits. Results suggest average social costs are minimized with recycling rates well below observed and mandated levels in Japan. Cost-minimizing municipalities are estimated to recycle less than the optimal rate. These results are robust to changes in the components of social costs, indicating that Japan and perhaps other developed countries may be setting inefficiently high recycling goals.     

Industrial ecology flows of agriculture and food industry in Finland: utilizing by-products and wastes

Although half of the administrative units in China are said to have implemented their local Agenda 21, the promotion of sustainable communities is not pervasive. In this paper, we adopted a relatively untried mode of analysis and a socio-economic context to illustrate the potentials and failures of China's grassroots local government bodies in achieving sustainable waste management. Our study shows that, among the three main functions of sustainable waste management (ensuring environmental hygiene, provision of recycling logistics and changing the consumption pattern of the local community) for local governments, grassroots local government bodies in mainland China are only able to do the minimum, i.e. ensuring environmental hygiene and handling complaints. One of the reasons for the failure is that, despite the emphasis on capacity building in China's Agenda 21, the reality is that no action is taken to empower grassroots local government. Despite the high profile accorded by the Chinese central government to motivating local governments to formulate their own Agenda 21, local sustainability and waste management performance have little relevance to the appraisal systems of these government agents.     

废物最少化是乡镇工业污染防治的首选途径

分析了我国乡镇工业的污染现状、特点和原因以及污染控制现状。通过对废物最少化的简介和乡镇工业实施废物最少化的可行性分析,以及对我国有关废物最少化法规、政策的分析等,充分证明废物最少化是乡镇工业污染控制的首选途径。     

Technical measures to achieve a cleaner production mode for recycled paper mills

China’s paper production reached 79.8 ×10⁶ t in 2008 and ranked number one in the world. Because of its high consumption of water, energy and materials and its serious pollution, the present processes are not likely to be sustainable. An alternative, the closed Water Loop-Papermaking Integration (WLPI) method, is put forward in this paper. The WLPI method can be realized in a recycled paper mill by adding technologies and using recycled water. Many industrial case studies have shown that a large quantity of water, energy and materials can be saved, and the quantity of waste sludge and wastewater discharge was minimized by using the WLPI method. The design of the water reuse system, control of calcium hardness, water recycling and minimal waste sludge are discussed. Anaerobic technology plays an important role in the WLPI method to lower cost, energy use and waste. In the brown paper and coated white board production, zero-effluent discharge can be realized. Fresh water consumption is only 1–2 m³·t^-1. For the paper mills with deinking and bleaching processes, about 10 m³·t^-1 of fresh water and a similar amount of effluent discharge are needed. Power saving using anaerobic technology is 70% when recycled water is used in comparison with the conventional activated sludge process. Waste sludge can be decreased to about 5% of the initial process due to reuse of the waste sludge and the lower bio-sludge production of the anaerobic process.