Biomonitoring of cadmium, chromium, nickel and arsenic in general population living near mining and active industrial areas in Southern Tunisia

The human health impact of the historic and current mining and industrial activities in Tunisia is not known. This study assessed the exposure to metals in the population of Southern Tunisia, using biomonitoring. The aim of this pilot study was to evaluate metal exposure on 350 participants living near mining and active industrial areas in the South of Tunisia. Blood specimens were analyzed for metals (Cd, Cr, As, and Ni) by Atomic Absorption Spectrometer equipped with Zeeman background correction and AS-800 auto sampler by graphite furnace and graphite tubes with integrated L'vov platform. The sample population was classified according to different age groups, sex, smoking habit, sea food and water drinking consumption, occupational exposure, amalgam fillings and place of residence. The blood As, Cd, Cr and Ni values expressed as mean?±?SD were 1.56?±?2.49, 0.74?±?1.15, 35.04?±?26.02 and 30.56?±?29.96 μg/l, respectively. Blood Cd and Ni levels in smokers were 2 and 1.2 times, respectively, higher than in non-smokers. Blood Cd levels increase significantly with age (p?=?0.002). As, Cd and Ni were significantly correlated with gender and age (p?<?0.05). Cd level in blood samples of subjects occupationally exposed was 1.3 times higher than that of non-exposed. Blood metals were not significantly affected by amalgam fillings, place of living and sea food and drinking water consumption. This first biomonitoring study of metal exposure in the South of Tunisia reveals a substantial exposure to several metals. The pathways of exposure and health significance of these findings need to be further investigated.     

Monitoring dioxins and furans in the vicinity of an old municipal waste incinerator after pronounced reductions of the atmospheric emissions

In order to get an overall picture of the environmental impact of an old municipal solid waste incinerator (MSWI) from S. Adrià del Besòs (Barcelona, Catalonia, Spain), a monitoring program addressed at determining the levels of a number of pollutants in the vicinity of the facility was initiated in 1998. In March 1999, an adaptation was carried out due to EU legislation on pollutant emissions from the stack. As a result, emissions of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) were notably reduced, and a significant (30%) decrease was found in the levels of PCDD/F in herbage samples collected in the vicinity of the MSWI. In March 2001, herbage samples were collected at the same sampling points and the PCDD/F levels measured again. The current PCDD/F concentrations range from 0.23 to 1.43 ng I-TEQ kg(-1) (dry matter), with median and mean values of 0.58 and 0.66 ng I-TEQ kg(-1) (dry matter), respectively, while in the 2000 survey the PCDD/F concentrations ranged from 0.22 to 1.20 ng I-TEQ kg(-1) (dry matter), with median and mean values of 0.57 and 0.61 ng I-TEQ kg(-1) (dry matter), respectively. Although the current PCDD/F concentrations in herbage samples are comparable to those found in recent surveys carried out in various places of Catalonia, an exhaustive evaluation of the data, including principal component analysis, indicates that other emission sources of PCDD/Fs also have a notable environmental impact on the area under direct influence of the MSWI.     

Monitoring and assessment of soil and forage molybdenum near an atmospheric source

Forage and soil molybdenum (Mo) were measured in the vicinity of a Mo processing plant in southwestern Pennsylvania, USA. Molybdenum concentrations in red clover plants (Trifolium pratense L.), measured at 23 sites, ranged from 1.1 to 56.6 mg kg^–1. Fourteen of the 23 sites sampled had red clover plants with Mo concentrations over the threshold value of 6 mg kg^–1. Red clover Cu:Mo concentration ratios were below the recommended ratio of 4 in 19 of the sites. The low Cu:Mo values, along with high plant Mo concentrations, indicates that there is a potential risk of molybdenosis in ruminant animals in this area. Acid digested (sorbed) soil Mo concentrations, measured at 30 sites, ranged from 7.0 (background level) to 131 mg kg^–1. Using the Baker Soil Test (BST) extract, molybdenum soil concentrations ranged from 0.01 to 3.99 mg kg^–1. Regression equations were developed to predict plant uptake of soil Mo based on the red clover plant, soil extracts and soil pH data. The R-squared values for predicting plant uptake were 81.9% for the BST extract and 81.6% for the acid digestion extract plus soil pH. Based on the above results, a protocol has been implemented for assessing the risk of high soil Mo near this Mo processing plant.     

Biomonitoring for exposure to multiple trace elements via analysis of urine from participants in the study of metals and assisted reproductive technologies (SMART)

Humans are exposed to concentrations of multiple trace elements through a variety of background sources; many are suspected reproductive toxicants. Prior to investigating associations between trace elements and human reproductive health, potential biomarkers of exposure should be characterized by sources of variability in the population at risk. Factors influencing elemental exposure should also be identified to ensure their consideration as potential confounding variables. The principal aim of this study is to characterize sources of variability for 19 trace elements measured in urine specimens collected from 55 women and 36 male partners completing a 1st cycle of in vitro fertilization (IVF). Urine specimens were analyzed using a biomonitoring method based on inductively coupled plasma-mass spectrometry (ICP-MS). Randomly selected urine specimens (～6%) were analyzed in duplicate, and these data were used to characterize sources of variability. Nine trace elements including As, Ba, Cd, Cs, Co, Cu, Mn, Mo, and Zn, were quantified in most specimens, indicating their utility in future epidemiologic studies of trace elements exposure and IVF outcomes. With few exceptions, normalizing urine using the traditional creatinine-correction procedure, or an alternative approach based on a linear regression model, increased residual variability only slightly. Sex and race appear to be important factors to consider in epidemiologic studies conducted in this population. Urine concentrations for most elements are similar to those reported in the 2005-2006 National Health and Nutrition Examination Survey (NHANES); however, differences in others may indicate regional trends or a unique exposure history for this infertile study population.     

Monitoring and assessment of daily exposure of roadside workers to traffic noise levels in an Asian city: a case study of Bangkok streets

Four noise monitoring sites were strategically established to evaluate average noise level and audiometric assessment at various traffic zones of Bangkok Metropolitan Region (BMR). During the monitoring period, noise levels were found to be 72.8–83.0 dBA during day time and 59.5–74.5 dBA during night time. The finding also indicated that traffic noise levels depend on distance from roadside, diurnal variation and character of the traffic and street configuration. Audiometric measurement of 4000 persons was carried by four major hospitals in Bangkok to study the relationship between traffic noise exposure of groups of people working in the streets and hearing loss. Four different categories of occupational people, i.e., drivers, street vendors, traffic officers and dwellers were selected and were further classified into age groups (16–25, 26–35, 36–45 and 46–55 years old) to monitor the traffic noise induced hearing loss throughout their everyday lives. The control group was deliberately chosen to screen out the effects of traffic noise. According to the audiometric investigation, it was revealed that hearing capacity of the daily noise exposure groups living in the three urban sites (Yaowarat Road, Din Daeng Road and Ratchaprarop Road) were noticeably poorer than those who were living in suburban site (Phahonyothin Road). It was noted that the mean hearing threshold level (HTL) of the 16–25 years old groups were found to have better hearing capacity than those older adults of 46–55 years old. In particular the mean HTL dropped at the frequency of 4000 Hz. Among the occupational population who were living in the urban monitoring sites, the driver groups were found to have the highest risk of traffic noise induced hearing loss.     

Approaches to systematic assessment of environmental exposures posed at hazardous waste sites in the developing world: the Toxic Sites Identification Program

In the developing world, environmental chemical exposures due to hazardous waste sites are poorly documented. We describe the approach taken by the Blacksmith Institute's Toxic Sites Identification Program in documenting environmental chemical exposures due to hazardous waste sites globally, identifying sites of concern and quantifying pathways, populations, and severity of exposure. A network of local environmental investigators was identified and trained to conduct hazardous waste site investigations and assessments. To date, 2,095 contaminated sites have been identified within 47 countries having an estimated population at risk of 71,500,000. Trained researchers and investigators have visited 1,400 of those sites. Heavy metals are the leading primary exposures, with water supply and ambient air being the primary routes of exposure. Even though chemical production has occurred largely in the developed world to date, many hazardous waste sites in the developing world pose significant hazards to the health of large portions of the population. Further research is needed to quantify potential health and economic consequences and identify cost-effective approaches to remediation.     

Bioaerosol exposure assessment in the workplace: the past, present and recent advances

Louis Pasteur described the first measurements of airborne microorganisms in 1861. A century later, the inhalation of spores from thermophilic microorganisms was shown to induce attacks of farmers' lung in patients with this disease, while endotoxins originating from Gram-negative bacteria were identified as causal agents for byssinosis in cotton workers. Further epidemiological and toxicological studies have demonstrated inflammatory, respiratory, and pathogenic effects following exposure to bioaerosols. Exposure assessment is often confounded by the diversity of bioaerosol agents in the environment. Microorganisms represent a highly diverse group that may vary in toxicity. Fungi and bacteria are mainly quantified as broad groups using a variety of viable and nonviable assessment methods. Endotoxins and β(1 → 3)-glucans are mainly measured by their activity in the Limulus amebocyte lysate assay, enzymes by immuno-chemical methods and mycotoxins by liquid chromatography-mass spectrometry. Few health-based occupational exposure limits (OELs) are available for risk assessment. For endotoxins, a health-based OEL of 90 endotoxin units m(-3) has been proposed in the Netherlands. A criteria document for fungal spores recently proposed a lowest observed effect level of 100,000 spores m(-3) for non-pathogenic and non-mycotoxin producing species based on inflammatory respiratory effects. Recent developments in bioaerosol assessment were presented at the Organic Dust Troms? Symposium including molecular biological methods for infectious agents and organisms that are difficult to cultivate; studies of submicronic and hyphal fragments from fungi; the effect of biodiversity of microorganisms in asthma studies; and new/improved measurement methods for fungal antigens, enzymes and allergens. Although exposure assessment of bioaerosol agents is complex and limited by the availability of methods and criteria, the field is rapidly evolving.     

Bridging the divide between theory and guidance in strategic environmental assessment: A path for Italian regions

Clear and effective legislation is a requisite to bring sustainable development from theory into practice. This paper develops a methodology to investigate how Italian regional legislation disciplines the use of Strategic Environmental Assessment (SEA), the procedure used in the European Union (EU) to pursue sustainable development of policies, plans, and programs (PPPs). Our case study is the Italian regional level, examined to identify eventual flaws and areas for improvement for each regional legislative framework. For this purpose, this study refers to a selection of analytical criteria recurring in the international debate on sustainability assessments. Statistical multi-dimensional analysis is used to identify Italian regions with similar SEA legislation. We recognize four taxonomies, depending on the way regional legislation provides information about i) legislation and guidelines, ii) integration between SEA and PPPs, iii) sustainability goals, iv) technical organization, v) participatory organization, and vi) monitoring. The results suggest that Italian administrators should cooperate to improve legislation at the regional level. Acknowledging the institution-centred nature of SEA, this methodology could drive the EU to better support SEA development in countries with diversified traditions.     

Global warming potential of food waste through the life cycle assessment: An analytical review

Food loss and waste represent an increasing concern under social, economic and environmental perspective, either in developed or developing realities. It is estimated that more than 1.3 billion tons of food waste are generated along the whole food supply chain, from agricultural to final consumption stages, with associated environmental impacts estimated in approximately 3.3 Gigatons of CO₂ equivalent per year (6% of total anthropogenic greenhouse gases emissions). Indeed, food waste issue has been accounted among the 17 Sustainable Development Goals in terms of responsible production and consumption, with the aim of halving per capita global food waste and reduce food losses by 2030. The present paper, through a systematic, analytical and configurative review on food waste global warming potential, focuses on the role of Life Cycle Assessment and its related opportunities and challenges along upstream, core and downstream stages, considering at the same time the challenges embedded within alternative disposal technologies. Through the choice of 16 different research string and the selection of 33 papers out of more than 2000 articles between 2011 and 2021, the authors highlight the environmental impacts associated to food waste with regards to: (a) entire food baskets; (b) specific food commodities; (c) food service and households' experiences; (d) diverse disposal alternatives (e.g., anaerobic digestion, incineration, landfill), addressing future research and suitable opportunities to reach national and international sustainable goals.     

Assessment of potential health risk for inhabitants living near a former lead smelter. Part 2: site-specific human health risk assessment of Cd and Pb contamination in kitchen gardens

Metal contamination of urban soils and homegrown products has caused major concern. In Part 1, we investigated the long-term effects of a former smelter on the degree of kitchen garden-soil contamination and the quality of the homegrown vegetables from these gardens. The results showed that the soils retained a high level of contamination and that a large proportion of the vegetables produced did not comply with the legislation on the levels of metals allowed for human consumption. The present study aims to assess the associated potential health risk to local inhabitants through consumption of homegrown vegetables and ingestion of soil particles using a land use-based approach. For lead (Pb), the standard hazard quotient (HQ)-based risk assessment method was used to determine the HQ. For cadmium (Cd), the approach consisted of calculating the HQs and then deriving site-specific assessment criteria (SSAC) using the SNIFFER method. The results suggested that the exposure pathways considered should not engender any form of deleterious health effects for adults. For children, Pb was the main concern and induced a relatively high health risk through soil particle ingestion, and most total soil Cd concentrations exceeded the derived SSAC, in particular, through consumption of vegetables. The metal bioaccessibility in soils was incorporated into the methods to establish more realistic risk assessment measures. This study proposes an approach to integrate different human health risk assessment methods. Further investigations should complete the assessment to improve risk determination, e.g., the determination of metal bioaccessibility in vegetables.     

Biomonitoring study of heavy metals in biota and sediments in the South Eastern coast of Mediterranean sea, Egypt

Concentrations of Cd, Cu, Co, Zn, Mn and Fe were determined in biota and sediment samples collected from the Eastern Harbour and El-Mex Bay in the Mediterranean Sea, Egypt. The levels of Cu, Co, Zn, Mn and Fe in the macroalgae, Ulva lactuca, Enteromorpha compressa (green algae) and Jania rubens (red algae), recorded high concentrations except for Cd. Moreover, Fe was the most predominant metal in the seaweed. The two species of bivalves, Donax trunculus and Paphia textile, showed different amounts of metals in their tissue. The abundance of heavy metal concentrations in the mussel samples was found in the order Fe> Zn> Mn> Cu> Co> Cd and Fe> Zn> Mn> Cu> Cd> Co, respectively for the two species. The metals concentrations were generally higher compared with the previous studies in mussels from the same area. The levels of metals accumulated in the investigated fish samples, Saurida undosquamis, Siganus rivulatus, Lithognathus mormyrus and Sphyraena sphyraena, were higher than those of Marmara Sea (Turkey), for Co and Cd and lower for Cu, Zn, Mn and Fe. El-Mex Bay having the highest metals concentration in sediments as their order of abundance were Fe> Zn> Mn> Cu> Cd> Co. Nevertheless, a high variability in the metal levels occurs among the studied algae and biota and also between the investigated Harbour. A significant correlations (p < 0.05) were found for each of Zn and Fe in P. textile and of Co in D. trunculus relative to their concentrations in surficial sediments.     

An assessment of urban parks distribution from multiple dimensions at the community level: A case study of Beijing

Urban parks improve the quality of urban ecological environment and residents' physical and mental health. Existing studies have measured their spatial distribution in terms of accessibility or quality, however, this is not effective. Here, this study developed a spatial distribution assessment framework for urban parks, which included four dimensions: convenient degree (D₁), crowded degree (D₂), diversity of choices (D₃), and service quality (D₄). Taking Beijing as an example, we analyzed the difference in park distribution and found that park distribution is relatively equitable except for convenient degree. However, there are significant differences from the city center to the periphery. The inner-city area has better convenience, while the middle areas have more choices, and the outer ring performs better in terms of D₂ and D₄. There are significant gaps among communities with different housing prices. We found a gentrification trend within the Low, Middle-Low, and High price groups when analyzing the intra-group differences. This study can help urban planners and policymakers to better identify the gaps in park distribution and provide directions for optimizing the layout.     

Potential health risk of arsenic and cadmium in groundwater near Xiangjiang River, China: a case study for risk assessment and management of toxic substances

As part of our efforts to find effective methods to the drinking water risk management, the health risk assessment of arsenic and cadmium in groundwater near Xiangjiang River was analyzed. The results suggest that although the arsenic and cadmium concentrations in 97% of groundwater sources are less than the requirement of Water Quality Standards for Drinking Water (GB5749-2006) in China, the residents served by almost all of the investigated centralized drinking water sources have a significant potential health risk by consumption, especially cancer risk. It is justified through analyses that risk assessment is an effective tool for risk management, and the maximum permissible concentration of arsenic and cadmium in drinking water (0.01 and 0.005?mg L^-1, respectively) is suitable for China at present, considering the current economic status of China. Risk managers develop cleanup standards designed to protect against all possible adverse effects, which should take into account highly exposed individuals, effects of mixtures of toxic substances, attendant uncertainties, and other factors such as site-specific (or generic) criteria, technical feasibility, cost?Cbenefit analyses, and sociopolitical concerns.     

Implementing Strategic Environmental Assessment of spatial planning tools: A study on the Italian provinces

After more than a decade from the publication of the European Directive 2001/42/CE (Directive) on Strategic Environmental Assessment (SEA), the design and construction of the interested spatial planning instruments has gone through a variety of changes and integrations in European and in world states. This inhomogeneous panorama can be explained with a pattern of institutional structures that have so far affected the implementation of the Directive. The aim of this paper is to investigate the level of implementation of the Directive in Italy by developing a comparative analysis of the quality of integration of SEA within the design of the spatial coordination plan of a set of Italian provinces. Italian practice is analyzed in the framework of a comparative study of worldwide SEA implementation within spatial and land use planning. The results reveal strengths and weaknesses in SEA implementation at the provincial level and, in particular, the emergence of critical areas of research concerning institutional context, public participation, monitoring, and observatory of the spatial transformations.     

Relation of waste generation and composition to socio-economic factors: a case study

To develop an effective waste management strategy for a given region, it is important to know the amount of waste generated and the composition of the waste stream. Past research has shown that the amount of waste generated is proportional to the population and the average mean living standards or the average income of the people. In addition, other factors may affect the amount and composition of waste. These are climate, living habits, level of education, religious and cultural beliefs, and social and public attitudes. This paper presents the findings of a study carried out in a suburban municipal area in Sri Lanka to determine the solid waste generation rate and waste composition based on field surveys and to determine the related socio-economic factors. A database was developed that included information on the quantity and composition of waste generated in a sample of households in the study area over a time period. The collected data was analysed to relate waste generation and composition data to various socio-economic factors. Over 400 sample households were selected for the study using a stratified random sampling methodology based on municipal wards and property values. A technique that considers both the number of households in a particular income group (property value range) and the standard deviation of property values within a given income group was used to determine the appropriate sample size for each municipal ward. Through category and regression analyses, the quantities of waste and waste composition were related to several socio-economic factors. The paper describes the basis for the sample selection, the methodology adopted for data collection, the socio-economic parameters used for the analysis, and the relationships developed from the analysis.