Factors affecting the sustainability of solid waste management system—the case of Palestine

Understanding the predictors of sustainability in solid waste management (SWM) systems can significantly contribute to eliminate many waste management problems. In this paper, the sustainability elements of SWM systems of interest are (1) attitudes toward separation at the source, (2) behaviour regarding reuse and/or recycling and (3) willingness to pay for an improved service of SWM. The predictors affecting these three elements were studied in two Palestinian cities: Ramallah and Jericho. The data were collected via structured questionnaires and direct interviews with the respondents, and the analysis utilized a logistic regression model. The results showed that the place of residence and dwelling premises are the significant factors influencing attitudes toward separation at the source; the place of residence and age are the significant factors explaining behaviour regarding reuse and/or recycling; while the dwelling premises, gender, level of education and being received education on waste management are the significant factors affecting willingness to pay for an improved service of SWM.     

Design and assembly of an experimental laboratory for the study of atmosphere–plant interactions in the system of fumigation chambers

A 5-day biochemical oxygen demand (BOD(5)) test has been used as the standard measurement of organic pollution in rivers worldwide. However, it may be argued that BOD is not a sufficient indicator of organic pollution when nitrogenous biochemical oxygen demand (NBOD) is present in water samples. In this study, BOD, NBOD, and carbonaceous biochemical oxygen demand (CBOD) of treated sewage effluent (TSE) were measured near at the discharge outlet of 3 sewage treatment plants (STPs) in Sakai, Itachi, and Kashio rivers in Central Japan. Additional measurements were conducted at one point upstream and two points downstream from the STP discharge points in the rivers. It was estimated that NBOD values in the TSE of Sakai River, Kashio River and Itachi River accounted for 54%, 69% and 18% of their BOD values, respectively. Respective NH4+ and NO2- concentrations were positively correlated with those of NBOD values in Sakai, Itachi, and Kashio rivers. The BOD loads from the TSE were estimated to be 2.2, 5.7, and 1.2 times higher than the CBOD loads in the Sakai, Itachi, and Kashio rivers, respectively. The variation of the portion of NBOD values of each TSE, as well as the ratios of CBOD to BOD loads, was attributed to the difference in each STP system. Consequently, the NH4+ and NO2- of TSE led to the increase of NBOD in the Sakai River basin.     

Denitrification potential of the Northern Arabian Gulf—an experimental study

The study aims to establish denitrification potential of the Northern Arabian Gulf (NAG), as nitrogen critically affects the ocean productivity, obliterates acidity, oxidative capacity and radiative transfer capability of atmosphere. The experimental study was conducted by taking cores from intertidal zones from two different sites in North and South, referred as sites N and S; representing two distinct environmental milieu. The experiment was conducted in controlled laboratory conditions simulating the tidal cycles. Multiple cores were taken and loaded with seawater with different N concentrations, the redox potential was established for each condition. Redox potential was significantly lower at 10?cm depth compared to the surface in all cores (P?<?0.001). The redox potential at surface and at 10?cm depth was significantly lower at site S compared to site N (P?<?0.001; F?=?714.2), suggesting anaerobic sediments at site S. Effects of nitrate spiked seawater on denitrification under nonflooded and flooded conditions at the two sites were also studied. Three-way ANOVA analysis indicated that site, nitrate concentration, and flooding had significant main and interactive effects on the rate of denitrification. The results suggest that under ambient nitrate concentrations (0.03?mg NO₃-N?l^?1), 6.3?±?2.1?g NO₃-N?ha?day can be denitrified by inter-tidal zone sediments. At a nitrate concentration of 1?mg NO₃-N?l^?1, 92?±?16?g NO₃-N?ha?day may be denitrified whilst at a very high nitrate load of 10?mg NO₃-N?l^?1, the sediments may attain a rate of denitrification close to 404?±?78?g NO₃-N?ha?day.     

The validation analysis of the INSHORE system��a precise and efficient coastal survey system

Government and environmental entities are becoming increasingly concerned with qualifying and quantifying the erosion effects that are observed in sandy shores. Correspondingly, survey methodologies that gather data for such erosion studies are increasingly being demanded. The responsible entities are continually broadening their areas of interest, are concerned in the establishment of regular monitoring programmes and are demanding high accuracy from the geo-spatial data that is collected. The budget available for such monitoring activities, however, does not parallel the trend in the increasing demand for quality specifications. Survey methodologies need improvement to meet these requirements. We have developed a new land-based survey system--the INSHORE system--that is ideal for low cost, highly efficient and highly precise coastal surveys. The INSHORE system uses hi-tech hardware that is based on high-grade global positioning system (GPS) receivers and a laser distance sensor combined with advanced software algorithms. This system enables the determination of the ground coordinates of the surveyed areas with a precision of 1 to 2 cm, without having a sensor in contact with the ground surface. The absence of physical contact with the ground makes this system suitable for high-efficiency surveys. The accuracy of the positioning, which is based on advanced differential GPS processing, is enhanced by considering the estimated attitude of the GPS receiver holding structure and eliminates undesirable offsets. This paper describes the INSHORE survey system and presents the results of validation tests that were performed in a sandy shore environment.     

Seasonal evaluation and spatial variability of suspended particulate matter in the vicinity of a large coal-fired power station in India—A case study

Coal combustion in the power sector gives rise to the emission of primary and secondary particulate pollutants. Since the emission of pollutants depends on coal quality and combustion technology, and given that transport, transformation and deposition of contaminants depend on regional climatic conditions, specific studies for the power stations is needed to evaluate their environmental impacts. Monitoring of ambient respirable suspended particulate matter (RSPM) and suspended particulate matter (SPM) levels around a large coal-fired power station in India was carried out. The specific objectives were the determination of spatial and seasonal variability in RSPM and SPM levels, and their relationship with meteorological parameters such as wind velocity and relative humidity. The results have shown a marked seasonal trend and spatial variability in RSPM and SPM levels in the study area. Higher concentrations of ambient RSPM and SPM were found in downwind monitoring stations compared to upwind direction. Ratios of RSPM to SPM and correlation coefficient values between RSPM and SPM along with meteorological parameters were also worked out. Relative humidity and wind velocity have shown an inverse relation with particulate deposition pattern.     

Assessment of flood-induced changes of phytoplankton along a river–floodplain system using the morpho-functional approach

In this research, we aimed to find out how the differences in hydrological connectivity between the main river channel and adjacent floodplain influence the changes in phytoplankton community structure along a river–floodplain system. The research was performed in the River Danube floodplain (Croatian river section) in the period 2008–2009 characterised by different flooding pattern on an annual time scale. By utilising the morpho-functional approach and multivariate analyses, the flood-derived structural changes of phytoplankton were analysed. The lake stability during the isolation phase triggered the specific pattern of morpho-functional groups (MFG) which were characterised by cyanobacterial species achieving very high biomass. Adversely, the high water turbulence in the lake during the frequent and extreme flooding led to evident similarity between lake and river assemblages. Besides different diatom species (groups of small and large centrics and pennates), which are the most abundant representatives in the river phytoplankton, many other groups such as cryptophytes and colonial phytomonads appeared to indicate altered conditions in the floodplain driven by flooding. Having different functional properties, small centric diatom taxa sorted to only one MFG cannot clearly reflect environmental changes that are shown by the species-level pattern. Disadvantages in using the MFG approach highlight that it is still necessary to combine it with taxonomical approach in monitoring of phytoplankton in the river–floodplain ecosystems.     

Determining the depositional pattern by resistivity–seismic inversion for the aquifer system of Maira area,Pakistan

Velocity and density measured in a well are crucial for synthetic seismic generation which is, in turn, a key to interpreting real seismic amplitude in terms of lithology, porosity and fluid content. Investigations made in the water wells usually consist of spontaneous potential, resistivity long and short normal, point resistivity and gamma ray logs. The sonic logs are not available because these are usually run in the wells drilled for hydrocarbons. To generate the synthetic seismograms, sonic and density logs are required, which are useful to precisely mark the lithology contacts and formation tops. An attempt has been made to interpret the subsurface soil of the aquifer system by means of resistivity to seismic inversion. For this purpose, resistivity logs and surface resistivity sounding were used and the resistivity logs were converted to sonic logs whereas surface resistivity sounding data transformed into seismic curves. The converted sonic logs and the surface seismic curves were then used to generate synthetic seismograms. With the utilization of these synthetic seismograms, pseudo-seismic sections have been developed. Subsurface lithologies encountered in wells exhibit different velocities and densities. The reflection patterns were marked by using amplitude standout, character and coherence. These pseudo-seismic sections were later tied to well synthetics and lithologs. In this way, a lithology section was created for the alluvial fill. The cross-section suggested that the eastern portion of the studied area mainly consisted of sandy fill and the western portion constituted clayey part. This can be attributed to the depositional environment by the Indus and the Kabul Rivers.     

Investigation of hydrophobic contaminants in an urban slough system using passive sampling – insights from sampling rate calculations

Semipermeable membrane devices (SPMDs) were deployed in the Columbia Slough, near Portland, Oregon, on three separate occasions to measure the spatial and seasonal distribution of dissolved polycyclic aromatic hydrocarbons (PAHs) and organochlorine compounds (OCs) in the slough. Concentrations of PAHs and OCs in SPMDs showed spatial and seasonal differences among sites and indicated that unusually high flows in the spring of 2006 diluted the concentrations of many of the target contaminants. However, the same PAHs - pyrene, fluoranthene, and the alkylated homologues of phenanthrene, anthracene, and fluorene - and OCs - polychlorinated biphenyls, pentachloroanisole, chlorpyrifos, dieldrin, and the metabolites of dichlorodiphenyltrichloroethane (DDT) - predominated throughout the system during all three deployment periods. The data suggest that storm washoff may be a predominant source of PAHs in the slough but that OCs are ubiquitous, entering the slough by a variety of pathways. Comparison of SPMDs deployed on the stream bed with SPMDs deployed in the overlying water column suggests that even for the very hydrophobic compounds investigated, bed sediments may not be a predominant source in this system. Perdeuterated phenanthrene (phenanthrene-d (10)). spiked at a rate of 2 microg per SPMD, was shown to be a reliable performance reference compound (PRC) under the conditions of these deployments. Post-deployment concentrations of the PRC revealed differences in sampling conditions among sites and between seasons, but indicate that for SPMDs deployed throughout the main slough channel, differences in sampling rates were small enough to make site-to-site comparisons of SPMD concentrations straightforward.     

Long-Term Planning of Waste Management System in the City of Regina – an Integrated Inexact Optimization Approach

In this study, an integrated solid waste management system based on inexact fuzzy-stochastic mixed integer linear programming (IFSMILP) has been applied to the long-term planning of waste management activities in the City of Regina. The model can effectively reflect dynamic, interactive, and uncertain characteristics of the solid waste management system in the city. The results have provided useful answers for the following questions: “What waste reduction goals are desired if the existing landfill's life is prolonged for 15 years?”, “What should be the waste flow allocation pattern in the city?”, “What should be done if the waste generation rate increases rapidly, while the relevant handling capacity is limited?”, and “What level of reliability will we have given the suggested waste management plan?”     

How circular design can contribute to social sustainability and legacy of the FIFA World Cup Qatar 2022™? The case of innovative shipping container stadium

The circular economy proposes a paradigm shift from the ‘take-make-waste’ type of economic system and aims to foster innovation, resource efficiency, and waste prevention. Mega sporting events can be considered great opportunities to promote sustainable cities and communities and leave a lasting positive legacy after the post-game stage. Qatar will organize the upcoming FIFA World Cup in 2022 and Ras Abu Aboud (RAA) is designed as a fully reusable and modular shipping container stadium, which will be dismantled, relocated, and reused after the tournament. This study aims to present the first comprehensive analysis on the social sustainability and legacy aspects of a circular and sharing economy application for the FIFA World Cup organization. The research analyzes the entire life cycle phases of the RAA stadium including the raw material production, construction, operations, and end-of-life. The Ecoinvent v.3.7.1 is used to quantify the midpoint environmental and endpoint human health impacts. For its operation phase assessment, two operation scenarios are comparatively analyzed: one-year temporary operation (Scenario 1) and 50 years of permanent operation (Scenario 2). Later, a simulation-based sensitivity analysis is conducted. Finally, we discussed how circular and modular design thinking can bring long-lasting legacy post-event, through reuse and recycling from a socio-economic perspective. An important finding shows that circular design under Scenario 1 can save up to 60% of human health impacts and significantly reduce the material footprint and dependence on imported construction materials. This research will enhance future awareness for sustainability benefits of circular and sharing economy application adopted by mega sporting events concerning the United Nations 2030 Agenda for Sustainable Development and FIFA's post-game legacy and sustainability strategies.     

Bioindicator organisms: Heavy metal pollution evaluation in the Ionian Sea (Mediterranean Sea—Italy)

Trace metal concentrations of mercury, cadmium, lead and chromium in Patella caerulea, and Mullus barbatus were investigated to provide information on pollution of Ionian Sea, since these metals have the highest toxic potential. High chromium levels (0.47–0.97 g g^–1 ww) were registered in limpet samples collected from two station near the Gulf of Taranto, while elevated concentration of mercury (0.31–1.50 g g^–1 ww) were found in mullet specimens from Sicily. The metal concentrations recorded at the clean stations may be considered as useful background levels to which to refer for comparison within the Mediterranean area. On the contrary, the high levels of chromium and mercury found respectively in the areas near the Gulf of Taranto and at Capo Passero being of concern in terms of environmental health need frequent monitoring.     

Optimisation and application of the voltammetric technique for speciation of chromium in the Patos Lagoon Estuary—Brazil

The chemical speciation analysis of chromium in one of the most important South American Estuary was performed for the first time. Samples were collected in Patos Lagoon Estuary (Brazil) and were analysed by adsorptive cathodic stripping voltammetry, with the following analytical figures of merit: limit of detection, 0.1 nmol L(-1); precision RSD?=?3%, n?=?7; linearity, from limit of quantitation up to 20 nmol L(-1); and accuracy of 99.8%, expressed as recovery. No labile chromium forms were identified in samples, beside industries and a city were near the study area. It is pointed out a reverse correlation between total and non-active chromium and salinity, which could be explained by biogeochemical processes.     

A moving target—incorporating knowledge of the spatial ecology of fish into the assessment and management of freshwater fish populations

Freshwater fish move vertically and horizontally through the aquatic landscape for a variety of reasons, such as to find and exploit patchy resources or to locate essential habitats (e.g., for spawning). Inherent challenges exist with the assessment of fish populations because they are moving targets. We submit that quantifying and describing the spatial ecology of fish and their habitat is an important component of freshwater fishery assessment and management. With a growing number of tools available for studying the spatial ecology of fishes (e.g., telemetry, population genetics, hydroacoustics, otolith microchemistry, stable isotope analysis), new knowledge can now be generated and incorporated into biological assessment and fishery management. For example, knowing when, where, and how to deploy assessment gears is essential to inform, refine, or calibrate assessment protocols. Such information is also useful for quantifying or avoiding bycatch of imperiled species. Knowledge of habitat connectivity and usage can identify critically important migration corridors and habitats and can be used to improve our understanding of variables that influence spatial structuring of fish populations. Similarly, demographic processes are partly driven by the behavior of fish and mediated by environmental drivers. Information on these processes is critical to the development and application of realistic population dynamics models. Collectively, biological assessment, when informed by knowledge of spatial ecology, can provide managers with the ability to understand how and when fish and their habitats may be exposed to different threats. Naturally, this knowledge helps to better evaluate or develop strategies to protect the long-term viability of fishery production. Failure to understand the spatial ecology of fishes and to incorporate spatiotemporal data can bias population assessments and forecasts and potentially lead to ineffective or counterproductive management actions.     

Analysis of long-term water quality for effective river health monitoring in peri-urban landscapes—a case study of the Hawkesbury–Nepean river system in NSW, Australia

The Hawkesbury–Nepean River (HNR) system in South-Eastern Australia is the main source of water supply for the Sydney Metropolitan area and is one of the more complex river systems due to the influence of urbanisation and other activities in the peri-urban landscape through which it flows. The long-term monitoring of river water quality is likely to suffer from data gaps due to funding cuts, changes in priority and related reasons. Nevertheless, we need to assess river health based on the available information. In this study, we demonstrated how the Factor Analysis (FA), Hierarchical Agglomerative Cluster Analysis (HACA) and Trend Analysis (TA) can be applied to evaluate long-term historic data sets. Six water quality parameters, viz., temperature, chlorophyll-a, dissolved oxygen, oxides of nitrogen, suspended solids and reactive silicates, measured at weekly intervals between 1985 and 2008 at 12 monitoring stations located along the 300 km length of the HNR system were evaluated to understand the human and natural influences on the river system in a peri-urban landscape. The application of FA extracted three latent factors which explained more than 70 % of the total variance of the data and related to the ‘bio-geographical’, ‘natural’ and ‘nutrient pollutant’ dimensions of the HNR system. The bio-geographical and nutrient pollution factors more likely related to the direct influence of changes and activities of peri-urban natures and accounted for approximately 50 % of variability in water quality. The application of HACA indicated two major clusters representing clean and polluted zones of the river. On the spatial scale, one cluster was represented by the upper and lower sections of the river (clean zone) and accounted for approximately 158 km of the river. The other cluster was represented by the middle section (polluted zone) with a length of approximately 98 km. Trend Analysis indicated how the point sources influence river water quality on spatio-temporal scales, taking into account the various effects of nutrient and other pollutant loads from sewerage effluents, agriculture and other point and non-point sources along the river and major tributaries of the HNR. Over the past 26 years, water temperature has significantly increased while suspended solids have significantly decreased (p?<?0.05). The analysis of water quality data through FA, HACA and TA helped to characterise the key sections and cluster the key water quality variables of the HNR system. The insights gained from this study have the potential to improve the effectiveness of river health-monitoring programs in terms of cost, time and effort, particularly in a peri-urban context.     

The reproduction of Enchytraeus sp.—technical improvement for the counting of juveniles

Soil-dwelling annelids of the genus Enchytraeus are used in ecotoxicology for testing of chemicals mixed in artificial soil or for testing of wastes and soils of unknown quality. ISO 16387 describes a method for determining the effects of substances or contaminated soils on survival and reproduction of Enchytraeus albidus or of the smaller species Enchytraeus buchholzi or Enchy-traeus crypticus. After the total test duration of 6 (or 4)?weeks, the juveniles hatched in the meantime are counted. There are several possible extraction techniques, which are always followed by counting the juveniles by hand, but none of them seems easy to handle. We proposed a new modification of the worm extraction method using flotation of fixed and stained juveniles followed by taking a photograph. The digital image of the juveniles is evaluated by computer processing. It makes the counting of juveniles much easier and less labor intensive.     

Techniques of remote sensing applied to the environmental analysis of part of an aquifer located in the São José dos Campos Region sp,Brazil

The anthropogenic activity on the surface can modify and introduce new mechanisms of recharging the groundwatersystem, modifying the tax, the frequency and the quality ofrecharge of underground waters. The understanding of thesemechanisms and the correct evaluation of such modifications arefundamental in determining the vulnerability of groundwatercontamination. The groundwater flow of the South ParaíbaCompartment, in the region of São José dos Campos, São Paulo, is directly related to structural features of theTaubaté Basin and, therefore, the analysis of its behaviourenhances the understanding of tectonic structure. The methodologyadopted for this work consists in pre-processing and processing of the satellite images, visual interpretation of HSI products, field work and data integration. The derivation of the main structural features was based on visual analysis of the textureelements of drainage, and the relief in sedimentary and crystalline rocks. Statistical analysis of the feature densitiesand the metric-geometric relations between the analysed elementshave been conducted. The crystalline rocks, on which the sediments were laying, conditions and controls the structural arrangement of sedimentary formations. The formation of the SouthParaíba Grabén is associated with Cenozoic distensive movement which reactivated old features of crust weakness and generated previous cycles with normal characteristics. The environmental analysis is based on the integration of the existing methodology to characterise vulnerability of an universal pollutant and density fracture zone. The digital integration was processed using GIS (Geographic Information System) to delineate five defined vulnerability classes. The hydrogeological settings were analysed in each thematic map and,using fuzzy logic, an index for each different vulnerability class was compiled. Evidence maps could be combined in a seriesof steps using map algebra.