Upstream Turbulence Effect on Pollution Dispersion

Experiments have been carried out to investigate turbulence at and above roof-level in an urban environment, and to predict the behaviour of street pollution from experiments using dye dispersion, for different roughness conditions and bed geometries. The flow in the boundary layer above an idealised urban environment has been simulated in a laboratory water flume. Comparisons have been made for the same model street canyon with and without the presence of upstream roughness. In the tests reported here, model street canyons were aligned perpendicular to the flow direction, and velocity measurements made within and above the model street canyons using a laser Doppler velocimeter (LDV). Flow visualisation techniques have also been used to confirm the gross flow features from streak images. Turbulence generated from the upstream roughness has a significant effect on the turbulence production and dispersion behaviour of the dye simulating pollution in street canyons.     

Model of turbulence penetration into a suspension layer on a sediment bed and effect on vertical solute transfer

The vertical diffusional mass (solute) transfer through a suspended sediment layer, e.g. at the bottom of a lake, reservoir or estuary, by the propagation of velocity fluctuations from above was investigated. The attenuation of the velocity fluctuations in the suspension layer and the associated effect on solute transfer through the suspension layer was simulated. To represent large eddies traveling downstream in water over a high-concentration suspended sediment layer, a streamwise velocity fluctuation moving in downstream direction was imposed along the upper boundary of the suspension layer. Velocity fluctuations and downstream velocity were normalized by the shearvelocity (U_*) at the top of the suspension layer. Streamwise and vertical velocity components inside the suspension layer, were obtained from the 2-D continuity and the Navier–Stokes equations. The persistence of turbulence with depth—as it penetrates from the overlying water into the suspension layer—was found to depend on its amplitude, its period, and on the apparent viscosity of the suspension. The turbulence was found to propagate efficiently into the suspension layer when its frequency is low, and the apparent viscosity of the suspension is high. Effects on vertical mass transfer were parameterized by penetration depth and effective diffusion coefficient, and related to apparent viscosity of the suspension, Schmidt number and shear velocity on top of the suspension layer. The enhancement of turbulence penetration by viscosity is similar to the flow near an oscillating flat plate (Stokes’ second problem), but is opposite to turbulence penetration into a stationary porous and permeable sediment bed. The information is applicable to water quality modeling mear the sediment/water interface of lakes, river impoundments and estuaries.     

Modelling hydraulic jump using the bubbly two-phase flow method

Hydraulic jumps have complex flow structures, characterised by strong turbulence and large air contents. It is difficult to numerically predict the flows. It is necessary to bolster the existing computer models to emphasise the gas phase in hydraulic jumps, and avoid the pitfall of treating the phenomenon as a single-phase water flow. This paper aims to improve predictions of hydraulic jumps as bubbly two-phase flow. We allow for airflow above the free surface and air mass entrained across it. We use the Reynolds-averaged Navier–Stokes equations to describe fluid motion, the volume of fluid method to track the interface, and the k–ε model for turbulence closure. A shear layer is shown to form between the bottom jet flow and the upper recirculation flow. The key to success in predicting the jet flow lies in formulating appropriate bottom boundary conditions. The majority of entrained air bubbles are advected downstream through the shear layer. Predictions of the recirculation region’s length and air volume fraction within the layer are validated by available measurements. The predictions show a linear growth of the shear layer. There is strong turbulence at the impingement, and the bulk of the turbulence kinetic energy is advected to the recirculation region via the shear layer. The predicted bottom-shear-stress distribution, with a peak value upstream of the toe of the jump and a decaying trend downstream, is realistic. This paper reveals a significant transient bottom shear stress associated with temporal fluctuations of mainly flow velocity in the jump. The prediction method discussed is useful for modelling hydraulic jumps and advancing the understanding of the complex flow phenomenon.     

Hydrodynamics and turbulence in emergent and sparsely vegetated open channel flow

This present study reports the results of an experimental study characterizing thorough variation of turbulent hydrodynamics and flow distribution in emergent and sparsely vegetated open channel flow. An emergent and rigid sparse vegetation patch with regular spacing between stems along the flow and transverse directions was fixed in the central region of the cross-section of open channel. Experiments were conducted in subcritical flow conditions and velocity measurements were obtained with an acoustic Doppler Velocimetry system. Large variations of the turbulence intensities, Reynolds shear stress, turbulent kinetic energy and vortical motions are found in and around the vegetation patch. At any cross-section through the interior of the vegetation patch, streamwise velocity decreases with increase in streamwise length and the velocity profiles converge from the log-law to a linear profile with increasing slope. Time-averaged lateral and vertical velocities inside the vegetation patch increase with increasing streamwise distance and converge from negative values to positive values. Turbulence intensities interior of the sparse vegetation patch are more than those of without the vegetation patch. Similar to the trend of streamwise velocity profiles inside the vegetation, turbulence intensities and longitudinal-normal Reynolds shear stress profile decreases with streamwise direction. In the interior of the vegetation patch and downstream of the trailing edge, turbulent kinetic energy profiles are exhibiting irregular fluctuations and the maximum values are occurring in the outer layer. Analysis of flow distribution confirms sparse vegetation patch is inducing a serpentine flow pattern in its vicinity. At the leading edge, flow is rushing towards the right hand sidewall, and at the trailing edge, flow is turning to the left hand sidewall. In between the leading and trailing edges, the streamlines are following a zig-zag fashion at varied degree along the streamwise and lateral directions. Immediate upstream of the leading edge and in the interior of the vegetation patch, vortex motion is clearly visible and the vortices are stretched along the width of the channel with streamwise direction.     

Advection and resulting CO2 exchange uncertainty in a tall forest in central Germany

Potential losses by advection were estimated at Hainich Forest, Thuringia, Germany, where the tower is located at a gentle slope. Three approaches were used: (1) comparing nighttime eddy covariance fluxes to an independent value of total ecosystem respiration by bottom-up modeling of the underlying processes, (2) direct measurements of a horizontal CO2 gradient and horizontal wind speed at 2 m height in order to calculate horizontal advection, and (3) direct measurements of a vertical CO2 gradient and a three-dimensional wind profile in order to calculate vertical advection. In the first approach, nighttime eddy covariance measurements were compared to independent values of total ecosystem respiration by means of bottom-up modeling of the underlying biological processes. Turbulent fluxes and storage term were normalized to the fluxes calculated by the bottom-up model. Below a u(*) threshold of 0.6 m/s the normalized turbulent fluxes decreased with decreasing u(*), but the flux to the storage increased only up to values less than 20% of the modeled flux at low turbulence. Horizontal advection was measured by a horizontal CO2 gradient over a distance of 130 m combined with horizontal wind speed measurements. Horizontal advection occurred at most of the evenings independently of friction velocity above the canopy. Nevertheless, horizontal advection was higher when u(*) was low. The peaks of horizontal advection correlated with changes in temperature. A full mass balance including turbulent fluxes, storage, and horizontal and vertical advection resulted in an increase of spikes and scatter but seemed to generally improve the results from the flux measurements. The comparison of flux data with independent bottom-up modeling results as well as the direct measurements resulted in strong indications that katabatic flows along the hill slope during evening and night reduces the measured apparent ecosystem respiration rate. In addition, anabatic flows may occur during the morning. We conclude that direct measurements of horizontal and vertical advection are highly necessary at sites located even on gentle hill slopes.     

Modelling the motion of an internal solitary wave over a bottom ridge in a stratified fluid

A series of laboratory experiments has been carried out to investigate the passage of an internal solitary wave of depression over a bottom ridge, in a two-layer fluid system for which the upper and lower layer is linearly-stratified and homogeneous respectively. Density, velocity and vorticity fields induced by the wave propagation over the ridge have been measured simultaneously at three locations, namely upstream, downstream and over the ridge crest, for a wide range of model parameters. Results are presented to show that wave breaking may occur for a sufficiently large wave amplitude and a strong ridge blockage factor, with accompanying mixing and overturning. Density field data are presented (i) to illustrate the overturning and mixing processes that accompany the wave breaking and (ii) to quantify the degree of mixing in terms of the wave and ridge parameters. For weak encounters, good agreement is obtained between the laboratory experimental results (velocity and vorticity fields induced by the wave propagation) and the predictions of a recently-developed fully nonlinear theory. Discrepancies between theory and experiment are discussed for cases in which breaking and mixing occur.     

Steady Shallow-Water Current and Solute Transport around a Semi-Conical Headland

Laboratory experiments have been carried out to investigate the effects of a sloping wall headland on the flow characteristics and the associated concentration distributions from a point source around the headland. A semi-conical headland with a slope of 1:2 was set up in a flow basin, 4.8 m long and 3.8 m wide. In this paper, the experimental results of a steady shallow-water current are reported. Three dimensional flow velocities in the basin were measured using Sontek-ADV instrument. The dye concentration levels in the basin were measured by two fluorometers. The experimental results showed a large-scale re-circulation region behind the semi-conical headland. The peak turbulence energy, at about 53% of the local kinetic flow energy, coincides with the region of high velocity gradient. Significant vertical flows were observed around the area near the downhill slope of the headland, with a maximum ratio of vertical to horizontal velocities being about 22%. Such relatively significant vertical scouring velocities, coupled with strong turbulence energy and high horizontal velocity gradients in the same region, could cause severe bed erosion. The experimental results have also been compared with the predicted results of a depth-averaged numerical model. The predicted eddy structure and the concentration distribution in the re-circulation area were found to compare favourably with the experimental results. However, the discrepancies in the flow velocities and the concentration levels near the headland were apparent. It was observed that the dye concentration continued to spread in the cross-stream direction after passing the headland, whereas only a limited extent of the lateral spreading was predicted by the numerical model further downstream of the headland.     

Large-scale turbulent structure of uniform shallow free-surface flows

The hydrodynamics of super- and sub-critical shallow uniform free-surface flows are assessed using laboratory experiments aimed at identifying and quantifying flow structure at scales larger than the flow depth. In particular, we provide information on probability distributions of horizontal velocity components, their correlation functions, velocity spectra, and structure functions for the near-water-surface flow region. The data suggest that for the high Froude number flows the structure of the near-surface layer resembles that of two-dimensional turbulence with an inverse energy cascade. In contrast, although large-scale velocity fluctuations were also present in low Froude number flow its behaviour was different, with a direct energy cascade. Based on our results and some published data we suggest a physical explanation for the observed behaviours. The experiments support Jirka’s [Jirka GH (2001) J Hydraul Res 39(6):567–573] hypothesis that secondary instabilities of the base flow may generate large-scale two-dimensional eddies, even in the absence of transverse gradients in the time-averaged flow properties.     

Measurements and modeling of open-channel flows with finite semi-rigid vegetation patches

The hydrodynamics of flows through a finite length semi-rigid vegetation patch (VP) were investigated experimentally and numerically. Detailed measurements have been carried out to determine the spatial variation of velocity and turbulence profiles within the VP. The measurement results show that an intrusion region exists in which the peak Reynolds stress remains near the bed. The velocity profile is invariant within the downstream part of the VP while the Reynolds stress profile requires a longer distance to attain the spatially invariant state. Higher vegetation density leads to a shorter adjustment length of the transition region, and a higher turbulence level within the VP. The vegetation density used in the present study permits the passing through of water and causes the peak Reynolds stress and turbulence kinetic energy each the maximum at the downstream end of the patch. A 3D Reynolds-averaged Navier–Stokes model incorporating the Spalart–Allmaras turbulence closure was employed subsequently to replicate the flow development within the VP. The model reproduced transitional flow characteristics well and the results are in good agreement with the experimental data. Additional numerical experiments show that the adjustment length can be scaled by the water depth, mean velocity and maximum shear stress. Empirical equations of the adjustment lengths for mean velocity and Reynolds stress were derived with coefficients quantified from the numerical simulation results.     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

Design and Testing of a Turbulence Probe for Harsh Flows

The force of wind on the ground created by turbulent eddies is commonly used to describe the horizontal flux of material during wind erosion. Here we present the Murdoch Turbulence Probe, an instrument for use in both clean and eroding flows which uses pressure differences to measure the three components of wind velocity. Correlation techniques calculate the forces near the ground and turbulence statistics in nearly real time, including turbulent velocity fluctuations from less than 0.1 Hz to 200 Hz, mean flow velocities, Reynolds stresses as well as the integral length and time scales. In the portable wind-tunnel used by Agriculture Western Australia, turbulence statistics were recorded over stable surfaces and in blowing sand from the initiation of erosion up to the time the sand supply was exhausted. Estimates of the friction velocity derived from the turbulence probe were compared with estimates obtained from the wind speed profile measured with a rake of pitot and static tubes. The Murdoch Turbulence Probe appears to work well in sandblasting conditions. Relative turbulence intensities ranged from 0.11 to 0.2 and are in close agreement with values in the literature. The ratio of the turbulence to the friction velocity (3 to 3.2) is at the high end of the reported range. The Reynolds stress measurements agree closely with predictions of the threshold friction velocities of the sand and estimates from the wind speed profile with a von Kármán constant of about 0.3, lower than the commonly accepted value of 0.4. We suggest that the wind-tunnel profile represents the `outer layer' of the boundary-layer that may best be described by a `Wake Law' or `Defect Law'. At about 54 mm above the surface, the friction velocity decreases from 0.64 m/s to 0.39 m/s and the mean velocity increases from 9.6 m/s to 11.6 m/s as the supply of sand is depleted. In addition to the friction velocity, other scales may be necessary to characterise the overriding effect of the wind and in extending wind-tunnel results to the field.     

A numerical (LES) investigation of a shallow-water, mid-latitude, tidally-driven boundary layer

We investigate turbulent mixing in a tidally driven, mid-latitude, shallow-water basin. The study is carried out numerically at a laboratory-scale, using large-eddy simulation. We compared the results of the simulation with those of a correspondent purely oscillatory flow (Stokes boundary layer). The effect of rotation on the flow dynamics is twofold. First, rotation gives rise to a mean spanwise flow that concurs to redistribute the turbulent energy among the Reynolds stresses, in particular between the horizontal directions, thus increasing the mixing across the water column and thickening the layer where developed turbulence is observable. Second, the presence of the horizontal component of the background vorticity (latitude effect) breaks the symmetry between the two semi-cycles of the oscillation, since turbulence results suppressed/enhanced during the first/second semi-cycle. These two effects significantly modify the turbulent characteristics with respect to the purely oscillating flow, although the mechanisms that generates turbulence present similar features. The qualitative agreement between our results and some measurements carried out in two sites with characteristics similar to the case analyzed suggests that the outcomes here provided may be of general use for the analysis of mid-latitude, neutrally stratified, shallow-water basins mainly driven by semi-diurnal tidal currents.     

Observations of the cross-wind velocity variance in the stable boundary layer

Nine tower datasets over grassland, brush rangeland, snow covered plain, the ocean, three different pine forests, an aspen forest and an urban site, are used to document the scale-dependence of the cross-wind velocity variance in the stable boundary layer. The turbulence velocity variance scales with the surface momentum flux, as reported in previous studies. Such scaling removes the stability dependence of the variance at a given site, and also removes most of the differences between sites. The scaling is more effective with use of a record-dependent averaging time for defining the turbulent fluctuations. The variable averaging time is the timescale associated with the gap region in the heat flux multiresolution cospectra. On scales larger than turbulence and less than a few hours (mesoscale), variations in the cross-wind velocity variance at a given site are not related to local variables such as the friction velocity. Possible exceptions include suppression of turbulence and mesoscale motions in well-defined drainage flows and enhancement of turbulence and mesoscale motions in stronger winds downstream of a ridge. Larger mesoscale variance is associated with complex terrain and forested sites compared to the more homogeneous sites in flat terrain with short or no vegetation. These differences between sites are related to the absence of a gap region in the velocity spectra at the complex terrain and forested sites. The observed probability distribution functions of the total variance and the mesoscale variance are documented for different averaging times, stability classes and site characteristics.     

Experimental study of recirculating flows generated by lateral shock waves in very large channels

Due to the lack of data on hydraulic-jump dynamics in very large channels, the present paper describes the main characteristics of the velocity field and turbulence in a large rectangular channel with a width of 4 m. Although a hydraulic jump is always treated as a wave that is transversal to the channel wall, in the case of this study it has a trapezoidal front shape, first starting from a point at the sidewalls and then developing downstream in an oblique manner, finally giving rise to a trapezoidal shape. The oblique wave front may be regarded as a lateral shockwave that arises from a perturbation at a certain point of the lateral wall and travels obliquely toward the centreline of the channel. The experimental work was carried out at the Coastal Engineering Laboratory of the Water Engineering and Chemistry Department of the Technical University of Bari (Italy). In addition to the hydraulic jump formation, a large recirculating flow zone starts to develop from the separating point of the lateral shock wave and a separate boundary layer occurs. Intensive measurements of the streamwise and spanwise flow velocity components along one-half width of the channel were taken using a bidimensional Acoustic Doppler Velocimeter (ADV). The water surface elevation was obtained by means of an ultrasonic profiler. Velocity vectors, transversal velocity profiles, turbulence intensities and Reynolds shear stresses were all investigated. The experimental results of the separated boundary layer were compared with numerical predictions and related work presented in literature and showed good agreement. The transversal velocity profiles indicated the presence of adverse pressure gradient zones and the law of the wall appears to govern the region around the separated boundary layer.     

Physical and numerical modelling of tsunami generation by a moving obstacle at the bottom boundary

This paper presents a study of the waves generated by a solid block landslide moving along a horizontal boundary. The landslide was controlled using a mechanical system in a series of physical experiments, and laser-induced fluorescence measurements resolved both spatial and temporal variations in the free surface elevation. During its constant-velocity motion, the landslide transferred energy into ‘trapped’ offshore-propagating waves within a narrow frequency band. The wave trapping is demonstrated by investigating the wave dispersion characteristics using a two-dimensional Fourier Transform. The first of the trailing waves broke at Froude numbers greater than or equal to 0.625. The parametric dependence of the largest-amplitude waves and the potential energy within the wave field are discussed. The experimental results were compared to the predictions of an incompressible Navier–Stokes solver with and without turbulence models. The numerical model under-predicted the measured wave amplitudes, although it accurately predicted the measured wave phasing. The turbulent model more accurately predicted the shapes of the trailing waves. Both experimental and numerical results confirmed that investigations into wave generation by submerged objects moving at constant velocity should also consider the initial acceleration of the object, as this affects the overall evolution of the wave field. The applicability of the horizontal-boundary results to more realistic field scenarios is discussed.     

Undular tidal bores: effect of channel constriction and bridge piers

A tidal bore may occur in a macro-tidal estuary when the tidal range exceeds 4.5–6 m and the estuary bathymetry amplifies the tidal wave. Its upstream propagation induces a strong mixing of the estuarine waters. The propagation of undular tidal bores was investigated herein to study the effect of bridge piers on the bore propagation and characteristics. Both the tidal bore profile and the turbulence generated by the bore were recorded. The free-surface undulation profiles exhibited a quasi-periodic shape, and the potential energy of the undulations represented up to 30% of the potential energy of the tidal bore. The presence of the channel constriction had a major impact on the free-surface properties. The undular tidal bore lost nearly one third of its potential energy per surface area as it propagated through the channel constriction. The detailed instantaneous velocity measurements showed a marked effect of the tidal bore passage suggesting the upstream advection of energetic events and vorticity “clouds” behind the bore front in both channel configurations: prismatic and with constriction. The turbulence patches were linked to some secondary motions and the proposed mechanisms were consistent with some field observations in the Daly River tidal bore. The findings emphasise the strong mixing induced by the tidal bore processes, and the impact of bridge structures on the phenomenon.     

Turbulent kinetic energy budgets in a model canopy: comparisons between LES and wind-tunnel experiments

A comparative study of turbulence in a wind-tunnel model canopy is performed, using Large eddy simulation (LES) and experimental data from PIV and hot-wire anemometry measurements. The model canopy is composed of thin cylindrical stalks. In the LES, these are represented using a plant-scale approach, while the scale-dependent Lagrangian dynamic model is used as subgrid-scale model. LES predictions of turbulence statistics and energy spectra are found to be in good agreement with the experimental data. Turbulent kinetic energy (TKE) budgets from the LES simulation are analyzed to provide more information absent in the measurements. Results confirm that sloshing motions at the low levels of the canopy are mainly driven by pressure fluctuations. A difference between the energy flux obtained from the energy spectrum and the SGS dissipation rate is observed, consistent with a spectral bypass mechanism in which the real spectral flux due to cascade is smaller than that implied by the energy-spectrum level, due to direct drain by the canopy.     

Preliminary Measurements of Turbulence and Environmental Parameters in a Sub-Tropical Estuary of Eastern Australia

In natural systems, mixing is driven by turbulence, but current knowledge is limited in estuarine zones where predictions of contaminant dispersion are often inaccurate. A series of detailed field studies was conducted in a small sub-tropical creek in eastern Australia. Hydrodynamic, physio-chemical and ecological measurements were conducted simultaneously to assess the complexity of the estuarine zone, notably the interactions between turbulence and environment. The measurements were typically performed at high frequency over a tidal cycle. The results provide an original data set to complement long-term monitoring and a basis for a more detailed study of mixing in sub-tropical systems. Unlike many long-term observations, velocity and water quality scalars were measured herein with sufficient spatial and temporal resolutions to determine quantities of interest in the study of turbulence, while ecological indicators were sampled systematically and simultaneously. In particular the results yielded contrasted outcomes, and the finding impacts on the selection process for key water quality indicators.     

Turbulence suppression by suspended sediment within a geophysical flow

Experiments are performed in a mixing box to evaluate the effect of suspended sediment on turbulence generated by an oscillating grid. Quartz-density sand of varying sizes and concentrations is used, and particle image velocimetry is employed to quantify only the fluid phase. Results show that (1) while a relatively large secondary flow field is present in the box, turbulence is a maximum near the grid and it decreases systematically toward the water surface; (2) relatively high concentrations of fine sediment can markedly alter this secondary flow field and significantly decrease both the time-mean and turbulent kinetic energy within the flow, yet these same sediment concentrations have little effect on the integral time and length scales derived for each velocity component; and (3) the overall turbulence suppression observed can be related to the transfer of energy from the fluid to the sediment and the maintenance of a suspended sediment load rather than commonly employed turbulence modulation criteria. These experimental data demonstrate unequivocally that the presence of a suspended sediment load can significantly reduce overall turbulent kinetic energy, and these results should be applicable to a range of sediment-laden geophysical flows.     

Flow structure of unconfined turbidity currents interacting with an obstacle

Driven by a growing importance to engineered structures, investigating the flow characteristics of turbidity currents interacting with a basal obstruction has become popular over the last three decades. However, research has focused on confined studies or numerical simulations, whereas in situ turbidity currents are typically unconfined. The present study investigates experimentally the velocity and turbulence structure of an unconfined turbidity current, in the immediate regions surrounding a rectangular obstacle. Initial density of the current, and substrate condition is varied. Through a novel technique of installing ultrasonic probes within the obstacle, the presence of a velocity recirculation region immediately upstream and downstream of the obstacle is revealed and confirmed with high-resolution imagery. This was found to be comparable to previous confined studies, suggesting that stream-wise velocity profile structure is somewhat independent of confinement. The obstacle was found to reduce velocity and turbulence intensity maxima downstream of the obstacle when compared with unobstructed tests.