首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 0 毫秒
1.
The results of assays carried out on plates used in the construction industry, manufactured entirely with solid wastes of a recycled paper plant, are presented and compared with the results obtained using agglomerated wood and plywood plates. Previous results had shown that wastes are composed essentially of polymers when these wastes are generated by recycled paper produced with the “waved type II” shavings. These solid wastes were placed in a mold that was heated and pressed with a hydraulic press in order to obtain the plates. The waste-produced plates were submitted to tests for humidity, swelling, water absorption, density, modulus of rupture-static bending, modulus of elasticity and direct screw withdrawal. These same assays had been carried out on two types of commercial wood plates, agglomerated wood and plywood, in order to compare the results with those obtained with the waste plate. Waste plates had similar behavior to the agglomerated wood plate, but it was possible to distinguish greater flexibility in the waste-produced plate and a significant difference in the tests for swelling and water absorption which showed the waste plate had a better performance than the agglomerated wood and plywood plates.  相似文献   

2.
The leather industry is an industry which generates a large amount of solid and liquid wastes. Most of the solid wastes originate from the pre-tanning processes while half of it comes from the fleshing step. Raw fleshing wastes which mainly consist of protein and fat have almost no recovery option and the disposal is costly. This study outlines the possibility of using the fleshing waste as an oil source for transesterification reaction. The effect of oil/alcohol molar ratio, the amount of catalyst and temperature on ester production was individually investigated and optimum reaction conditions were determined. The fuel properties of the ester product were also studied according to the EN 14214 standard. Cold filter plugging point and oxidation stability have to be improved in order to use the ester product as an alternative fuel candidate. Besides, this product can be used as a feedstock in lubricant production or cosmetic industry.  相似文献   

3.
A short-term study to characterize the solid waste stream in the Municipality of Veles, Macedonia, was performed during a 1 week period in the summer of 2002. In this study, several important parameters of the municipal solid waste stream were assessed. It was estimated that the average daily generation rate is 1.06+/-0.56 kg/cap/day, while the specific weights of the uncompacted and compacted solid waste are approximately 140.5 kg/m3 and 223 kg/m3, respectively. Furthermore, it was estimated that the daily generated volume of uncompacted waste is 7.5+/-4 L/cap/day. Although the short-term study is characterized by numerous limitations, in the absence of other existing data, such a study with direct measurements could significantly contribute to the development of an efficient solid waste management system in countries with economies in transition like Macedonia.  相似文献   

4.
5.
6.
The performance of Spanish solid waste collection   总被引:1,自引:0,他引:1  
In this paper we examine street cleaning and waste collection services in Spanish municipalities with a population exceeding 50,000. The purpose is to identify factors that influence the efficiency of these services. Three input variables (staff, vehicles and containers) and four outputs variables (tonnage, collection points, collection point density and kilometres of surface area washing) are analyzed using an analytical model based on Data Envelopment Analysis (DEA) methodology. These variables, along with non-controllable input variable (Tourist Index), were chosen because they were shown, based on a Tobit regression analysis, to have a statistically significant impact on municipality behaviour. The results obtained show that scale inefficiency was lower than pure technical efficiency, the latter is linked to service management. It was observed that the street-cleaning activity was performed more inefficiently than that of waste collection. Furthermore, it was detected that municipalities can reduce the resources used in rendering this service by 8%. Finally, an estimation using the Mann-Whitney test allows us to conclude that there is no difference between the inefficiencies observed in municipalities managed directly by town councils and those which have been transferred to private companies.  相似文献   

7.
The anaerobic digestion of solid organic waste   总被引:5,自引:0,他引:5  
  相似文献   

8.
垃圾处理产业体系的构建应从实际出发,坚持“政府引导,社区组织、企业参与、自产自消、因地制宜、源头控制、资源回收利用”的原则和“物质利用先于能量利用,物质再利用先于物质再生利用”的资源回收利用原则,并按部就班实施。  相似文献   

9.
10.
11.
12.
Entombed waste in current sanitary landfills will generate biogas and leachate when physical barriers fail in the future, allowing the intrusion of moisture into the waste mass contradicting the precepts of the sustainability concept. Bioreactor landfills are suggested as a sustainable option to achieve Final Storage Quality (FSQ) status of waste residues; however, it is not clear what characteristics the residues should have in order to stop operation and after-care monitoring schemes. An experiment was conducted to determine the feasibility to achieve FSQ status (Waste Acceptance Criteria of the European Landfill Directive) of residues in a pilot scale bioreactor landfill. The results of the leaching test were very encouraging due to their proximity to achieve the proposed stringent FSQ criterion after 2 years of operation. Furthermore, residues have the same characteristics of alternative waste stabilisation parameters (low BMP, BOD/COD ratio, VS content, SO4(2-)/Cl- ratio) established by other researchers. Mass balances showed that the bioreactor landfill simulator was capable of practically achieving biological stabilisation after 2 years of operation, while releasing approximately 45% of the total available (organic and inorganic) carbon and nitrogen into the liquid and gas phases.  相似文献   

13.
Biostabilization of municipal solid waste   总被引:3,自引:0,他引:3  
A mechanical-biological process for municipal solid waste (MSW) treatment was monitored for one year. Mechanical pre-treatment provided two fractions. The oversize fraction (diameter > 50 mm) (yield of 600 g kg(-1) ww) (46 Mg day(-1)) was used for refuse derived fuel production, after undergoing a mechanical refining processes, because of low moisture content (200-250 g kg(-1)) and high calorific value (2500-2800 kcal kg ww(-1)). The undersize fraction (diameter < 50 mm) (yield 400 g kg(-1) ww) (30 Mg day(-1)) contained about 800 g kg(-1) of the MSW organic matter. This fraction was biologically treated using an aerobic process with an organic waste fraction from separate collection (77 Mg day(-1)) and recycled stabilized material (62 Mg day(-1)) obtained from end-product sieve (diameter < 20 mm) used as bulking agent. A retention time of three weeks was sufficient to obtain stabilized products in agreement with up-dated rules of the Lombardy Region (North Italy) regarding biostabilization and composting processes. Dynamic Respiration Index (DRI), such as required by both Lombardy Region rules and suggested by the European Community, was chosen in preference to other indices in order to assess the degree of biological stability of the end products. A mean DRI value of 1164 mg O2 kg SV(-1) h(-1) was obtained and is in agreement with the proposed limit of 1000+/-200 mg O2 kg SV(-1) h(-1). Self-heating test, potential biogas production and fermentable volatile solids were also used as parameters to describe the potential impact of treated waste, providing further useful information. Nevertheless, all of these methods revealed analytical or interpretative limits. A complete mass balance of the biological treatment section showed that, from a net input of 107 Mg day(-1), only 250 g kg(-1) (27 Mg day(-1)) of the waste needed to be landfilled, with 750 g kg(-1) (80 Mg day(-1)) being lost as CO2 and H2O.  相似文献   

14.
The current situation of solid waste management in China   总被引:1,自引:1,他引:1  
With economic development, the quantity of solid waste is increasing rapidly in China; the total quantities of municipal solid waste (MSW), industrial solid waste (ISW), and hazardous waste (HW) in 2002 were 136.5 million tons, 945 million tons, and 10 million tons, respectively. In 2002, the quantity of MSW disposed of was 74.04 million tons, 89.30% of which was landfilled, 3.72% was incinerated, and 6.98% was composted. There are currently 651 disposal facilities for MSW in China. Mining gangue is the largest component of ISW, making up 27.5% of the total. In the Chinese industrial sector, the coal mining and processing industry contributed most to the total quantity of ISW, with 16.0% of the total quantity of ISW generated by this sector. In total, 44% of HW was recycled, 27% was stored, 13.5% was disposed of, and 15.4% was discharged. Of the total HW generated, 40% was produced by the chemical materials and chemical products industry. Five categories of HW, i.e., waste alkali, waste acid, inorganic fluoride waste, copper waste, and inorganic cyanide waste, made up 57.8% of the total HW generated. Solid waste pollution has become a huge challenge faced by those involved in Chinese environmental management, but this can be seen as an opportunity to improve environmental quality. This article introduces the strategies taken to improve solid waste management in China.  相似文献   

15.
Solid waste generation and its implications for people and the environment are global issues. The complexity of the waste composition and the ever-increasing percapita waste generation is a challenge for waste managers, particularly in developing countries. Thus, the need to have a clear policy on waste management and legislation to realize that policy is imperative. Malaysia is developing rapidly and problems such as the waste generation associated with development and industrialization are evident. The Solid Waste and Public Cleansing Management Bill, which was approved in August 2007 after a 10-year delay, is envisaged to have serious consequences in waste management practices and implementation in Malaysia. This article explores the main features of this all-encompassing bill and its impacts on the waste management scenario in Malaysia. In addition, a comparative evaluation is also discussed to explore the policies/legislation of selected countries vis-àvis the Malaysian bill.  相似文献   

16.
17.
The focus of this work was to investigate an enzymatic liquefaction of MSW organics, paper and cardboard. Liquefaction trials were conducted in different trial volumes: 50 g lab-scale trials and 50 kg vessel-tests and evaluated based on particle size and viscosity. The viscosity results showed that Celluclast 1.5 L had the singular significant effect on liquefaction of model MSW. No effect of α-amylase, protease and interaction in between and with cellulases on viscosity and particle size distribution was found in this study. Degradable material with a particle size above 1 mm after treatment was evaluated using SEM microscopy. These results showed that paper particles were the main obstacles needing additional treatment in order to become fully liquefied. In a pilot scale test treating authentic MSW; more than 90% of initial organic and paper dry matter (DM) was recovered as liquid slurry after sieving through a 5-mm sieve. These tests were performed at up to 35% DM, showing that this process can easily manage high DM loadings. MSW enzymatic liquefaction promotes the separation of organics and paper from solids, which facilitate the use of these degradable fractions, with minimal loss, capable to enter a biogas plant through existing pipes.  相似文献   

18.
伴随着公民社会的成长,对固体废弃物的认识逐步从处理、管理发展为治理,给出了固体废弃物治理的定义、特征、基本任务、治理准则与方法和主要障碍.  相似文献   

19.
In the production of leather the main waste that remains after splitting of limed hides before tanning is the lowest layer of the skin together with the underlying fatty tissue (subcutis). It is characterized by a very high water content (up to 870 g kg−1) and a balanced content of protein (40–60 g kg−1 of the dry mass), fat (10–20 g kg−1) of the dry mass) and carbohydrates. The object of this work was to elaborate a method to process this waste into useful products. The treatment proposed involves washing to remove the inorganic salts, separation of fat and extraction of collagen in hot water solution and additional extraction of protein from the insoluble residue after hydrolysis with alkaline proteinase. This results in the isolation of three fractions: fat—cattle tallow (4–12% of the total mass of the initial material), collagen hydrolysate—glue (5–10%) and protein concentrate for fodder (1–3% yield). Up to 95% of the protein in the initial material was extracted. Further purification of the collagen hydrolysate fraction into edible gelatin was achieved. The proposed method is applicable to every leather factory.  相似文献   

20.
The impact of food waste content on the municipal solid waste (MSW) friction angle was studied. Using reconstituted fresh MSW specimens with different food waste content (0%, 40%, 58%, and 80%), 48 small-scale (100-mm-diameter) direct shear tests and 12 large-scale (430 mm × 430 mm) direct shear tests were performed. A stress-controlled large-scale direct shear test device allowing approximately 170-mm sample horizontal displacement was designed and used. At both testing scales, the mobilized internal friction angle of MSW decreased considerably as food waste content increased. As food waste content increased from 0% to 40% and from 40% to 80%, the mobilized internal friction angles (estimated using the mobilized peak (ultimate) shear strengths of the small-scale direct shear tests) decreased from 39° to 31° and from 31° to 7°, respectively, while those of large-scale tests decreased from 36° to 26° and from 26° to 15°, respectively. Most friction angle measurements produced in this study fell within the range of those previously reported for MSW.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号