Evaluation of a low-cost transient mass measurement system in vehicle inspection and maintenance testing: results of a Gordon-Darby Study

A study was performed at a Gordon-Darby centralized inspection and maintenance (I/M) test lane in Phoenix, AZ, in December 1999 for the purpose of evaluating the accuracy of production Vehicle Mass Analysis System (VMAS) equipment relative to standard IM240 equipment. Simultaneous transient mass measurements were made on random vehicles using VMAS and IM240 systems on two test lanes during regular I/M testing. Cumulative mass emissions for 846 valid tests were correlated using least-squares regression analysis. Correlation indices were > 0.99 for both carbon monoxide (CO) and nitric oxide (NO) and 0.93 for hydrocarbon (HC), and the standard errors of regression were 1.38 g/mi, 0.123 g/mi, and 0.245 g/mi for CO, NO, and HC, respectively. These strong correlation results are reflected by high excess emission identification rates of 99.4% for CO, 99.3% for NO, and 94.5% for HC when applying final IM240 cut points with a < 2% error of commission for all pollutants.     

Modeling In-Use Vehicle Emissions and the Effects of Inspection and Maintenance Programs

Different ways for modeling the impact of vehicle emission inspection and maintenance programs on fleet hydrocarbon emissions are examined. A dynamic model is developed for forecasting fleet emissions in which individual vehicle performance is modeled as a stochastic process and vehicle emissions are tracked over time. Emissions inspection and repair are incorporated into the model, allowing for the stochastic aspects of both testing and repair. This model is compared to EPA’s model for evaluating the impact of vehicle emissions inspection and maintenance. We find that the way vehicle emission equipment deterioration overtime is modeled is important for forecasting emissions from the fleet and for assessing the success of inspection and maintenance programs. For inspection programs, we find that factors such as the proportion of vehicles tested, and repair effectiveness and duration have the greatest impact on emission reductions. The ability of different emission testing regimes to identify polluting vehicles has less impact on a program’s overall potential for emissions reduction. Policy recommendations for I&M testing and predictions of emission reduction credits from these tests will depend in important ways on the methods used in the underlying emissions models.     

Emissions from lit-use Motor Vehicles in Los Angeles: A Pilot Study of Remote Sensing and the Inspection and Maintenance Program

As part of a major field study to understand the causes of persistent, elevated carbon monoxide pollution episodes in Los Angeles, we performed a project to understand the emissions of vehicles in use. In this experiment, we assessed the accuracy of a remote sensing instrument designed to measure CO concentrations from vehicles as they were driven on the road. The remote sensor was shown to be accurate within ten percent of the directly measured tailpipe value. We performed a roadside inspection on 60 vehicles and demonstrated that the remote sensor could be used as an effective surveillance tool to identify high CO-emitting vehicles. We also compared the roadside data set to the biennial Smog Check (I/M) tests for the same vehicles, and observed that carbon monoxide and exhaust hydrocarbons from high emitters were much higher than when the vehicles received their routine inspection. Furthermore, for the high-emitting vehicles in this data set, the length of time since the biennial Smog Check had little influence on the cars’ emissions in the roadside inspection.     

Fine Particle (PM25) Measurement Methodology,Quality Assurance Procedures,and Pilot Results of the EXPOLIS Study

ABSTRACT

EXPOLIS is a European multicenter (Athens, Basel, Grenoble, Helsinki, Milan, and Prague) air pollution exposure study. It is the first international, population-based, large-scale study, where personal exposures to PM_{2 5} aerosol particles (together with volatile organic compounds and carbon monoxide) are being monitored. EXPOLIS is performed in six different centers across Europe, the sampled aerosol concentrations vary greatly, and the mi-croenvironmental samples are not collected with the same equipment as the personal samples. Therefore careful equipment selection, methods development and testing, and thorough quality assurance and quality control (QA & QC) procedures are essential for producing reliable and comparable PM_2.5 data. This paper introduces the equipment, the laboratory test results, the pilot results, the standard operating procedures, and the QA & QC procedures of EXPOLIS. Test results show good comparability and repeatability between personal and microenvironmen-tal monitors for PM2.5 at different concentration levels measured across Europe in EXPOLIS centers.     

Pentachlorotoluene and pentabromotoluene: Results of a subacute and a subchronic toxicity study in the rat

Abstract

Pentachlorotoluene (PCT) and pentabromotoiuene (PBT) are environmental contaminants detected in the Great Lakes ecosystem. In view of the paucity of toxicity data and the potential for human exposure, a subacute (28 day) and a subchronic (91 day) study were conducted in the rat. In the subacute study, groups of 10 male and 10 female rats were fed the diet containing PCT or PBT at 0, 0.5, 5.0, 50 or 500 ppm for 28‐days. In the subchronic study, the group size was increased to 15, the dose levels were 0, 0.05, 0.5, 5.0, 50 and 500 ppm in the diet and the exposure period was 91 days. Growth rate and food consumption were not affected by exposure to either chemical in the subacute and subchronic study. Clinical observations revealed no abnormalities. Decreased hemoglobin was observed in female rats fed 5.0 ppm PCT and higher levels in the subacute (28 day) study. In the same study the hematocrit value and erythrocyte numbers of females fed 5.0 or 500 ppm PCT diets were significantly lower than the control. In both subacute and subchronic studies mild dose‐dependent histopathological changes were observed in the thyroid, liver and kidney of rats fed PCT and PBT diets. In general male rats were more susceptible than females to the treatment of PCT and PBT. Based on these data, it was concluded that the no observable adverse effect level for PCT was 50 ppm in the diet (3.5 mg/kg b.w./day) and that of PBT was 5.0 ppm (0.35 mg/kg b.w./day).     

Sensitivity Analysis and Evaluation of MicroFacCO: A Microscale Motor Vehicle Emission Factor Model for CO Emissions

ABSTRACT

This paper presents a sensitivity analysis of a microscale emission factor model (MicroFacCO) for predicting realtime site-specific motor vehicle CO emissions to input variables, as well as a limited field study evaluation of the model. The sensitivity analysis has shown that MicroFacCO emission estimates are very sensitive to vehicle fleet composition, speed, and ambient temperature. For the present U.S. traffic fleet, the CO emission rate (g/mi) is increased by more than 500% at 5 mph in comparison with a speed greater than 40 mph and by ~67% at ambient temperatures of 45 °F and ≥95 °F in comparison with an ambient temperature of 75 °F.     

PM10: Results of a One-Year Monitoring Survey in the Netherlands

A comprehensive field assessment has been made of the measurement performance of PM10 inlets. Both precision and comparability are approximately 4 percent, complying well with the requirements of the proposed Federal Reference Method (FRM). Fluctuations in sampling efficiency play a dominant role. Hence, both comparability and precision can be interpreted in terms of changes in the 50 percent cutoff diameter D50. In this way a D50 performance of about 0.7 μm is deduced, clearly within the proposed FRM requirement of D50 = 10 ± 1 μm. There exists no fixed linear relationship between PM10 and TSP (total suspended particulate matter): different average situations yield different regression coefficients (Western Europe: 0.7 and USA: 0.5). Furthermore, there are different conversion factors, representative of average (0.5-0.7) or episodic situations of high concentration levels (0.8-0.9). Hence, TSP air quality standards should not be replaced by PM10 ones simply by using the regression results from various national studies because this could yield unequal stringent PM10 standards.     

PM2.5 Assessment in 21 European Study Centers of ECRHS II: Method and First Winter Results

Abstract

The follow-up of a cohort of adults from 29 European centers of the former European Community Respiratory Health Survey (ECRHS) I (1989–1992) will examine the long-term effects of exposure to ambient air pollution on the incidence, course, and prognosis of respiratory diseases, in particular asthma and decline in lung function. The purpose of this article is to describe the methodology and the European-wide quality control program for the collection of particles with 50% cut-off size of 2.5 µm aerodynamic diameter (PM_2.5 ) in the ECRHS II and to present the PM_2.5 results from the winter period 2000–2001.

Because PM_2.5 is not routinely monitored in Europe, we measured PM_2.5 mass concentrations in 21 participating centers to estimate background exposure in these cities. A standardized protocol was developed using identical equipment in each center (U.S. Environmental Protection Agency Well Impactor Ninety-Six [WINS] and PQ167 from BGI, Inc.). Filters were weighed in a single central laboratory. Sampling was conducted for 7 days per month for a year.

Winter mean PM_2.5 mass concentrations (November 2000–February 2001) varied substantially, with Iceland reporting the lowest value (5 µg/m³) and northern Italy the highest (69 µg/m³). A standardized procedure appropriate for PM_2.5 exposure assessmnt in a multicenter study was developed. We expect ECRHS II to have sufficient variation in exposure to assess long-term effects of air pollution in this cohort. Any bias caused by variation in the characteristics of the chosen monitoring location (e.g., proximity to traffic sources) will be addressed in later analyses. Given the homogenous spatial distribution of PM_2.5 , however, concentrations measured near traffic are not expected to differ substantially from those measured at urban background sites.     

Mass balance modelling of contaminants in river basins: a flexible matrix approach

A novel and flexible approach is described for simulating the behaviour of chemicals in river basins. A number (n) of river reaches are defined and their connectivity is described by entries in an n x n matrix. Changes in segmentation can be readily accommodated by altering the matrix entries, without the need for model revision. Two models are described. The simpler QMX-R model only considers advection and an overall loss due to the combined processes of volatilization, net transfer to sediment and degradation. The rate constant for the overall loss is derived from fugacity calculations for a single segment system. The more rigorous QMX-F model performs fugacity calculations for each segment and explicitly includes the processes of advection, evaporation, water-sediment exchange and degradation in both water and sediment. In this way chemical exposure in all compartments (including equilibrium concentrations in biota) can be estimated. Both models are designed to serve as intermediate-complexity exposure assessment tools for river basins with relatively low data requirements. By considering the spatially explicit nature of emission sources and the changes in concentration which occur with transport in the channel system, the approach offers significant advantages over simple one-segment simulations while being more readily applicable than more sophisticated, highly segmented, GIS-based models.     

Mapping Biological Resources in the Coastal Zone: An Evaluation of Methods in a Pioneering Study from Norway

For many years, the planning and management of terrestrial areas has been supported by a detailed knowledge of the distribution of habitats and their associated species. However, the detailed mapping of biological resources in extent coastal areas, such as the Norwegian coastal zone, is unrealistic due to its enormous coastline. Here, we present a useful and feasible approach and a set of simple, cost-effective methods which are suitable for providing a broad-scale overview of marine habitats and fish resources. This approach was developed in conjunction with a pioneer study conducted along the southern coast of the Skagerrak, where we combined knowledge gathered from local fishermen with scientific knowledge of important species and nature types to establish a coastal sea mapping program. GIS modeling tools were used in both the mapping program and to integrate local and scientific knowledge into digital maps made available to local area management. This multi-faceted approach, which combines local knowledge and scientific methods, provides valuable information with respect to marine biodiversity, and has been used extensively by local environmental management.     

Mass balance of decabromodiphenyl ethane and decabromodiphenyl ether in a WWTP

The additive flame retardant decabromodiphenyl ethane (deBDethane) has been identified in the environment, but little is known about its environmental behaviour. It is structurally similar to decabromodiphenyl ether (decaBDE), making it conceivable that it may also become an environmental contaminant of concern. In this study a mass balance of deBDethane and decaBDE was undertaken in a modern WWTP in Stockholm serving 7.05x10(5) inhabitants. Flow proportional samples of plant influent and effluent as well as daily grab samples of digested sludge were collected during two 7-day periods. All samples were analyzed with GC/HRMS using isotope labelled internal standards. The mean mass flows of deBDethane and decaBDE to the WWTP were 6.0 g per day and 55 g per day, respectively. Of this, less than 1% of both BFRs left the WWTP via the effluent, while the bulk was sequestered into the digested sludge, where the mean concentrations of deBDethane and decaBDE were 81 and 800 ng g(-1)d.wt., respectively. It is concluded that the transfer efficiency of deBDethane from the technosphere to the environment via WWTPs is similar to that of decaBDE.     

The Relationship between Judged Visibility and Judged Air Quality: Results of a Survey

ABSTRACT

Based on a study of the composition of urban solid waste (USW) and of socioeconomic variables in Morelia, Mexico, generation rates were estimated. In addition, the generation of residential solid waste (RSW) and nonresidential solid waste (NRSW) was forecasted by means of a multiple linear regression (MLR) analysis. For residential sources, the independent variables analyzed were monthly wages, persons per dwelling, age, and educational level of the heads of the household. For nonresidential sources, variables analyzed were number of employees, area of facilities, number of working days, and working hours per day. The forecasted values for residential waste were similar to those observed. This approach may be applied to areas in which available data are scarce, and in which there is an urgent need for the planning of adequate management of USW.     

Aerosol Measurement: The Use of Optical Light Scattering for the Determination of Particulate Size Distribution,and Particulate Mass,Including the Semi-Volatile Fraction

Abstract

The GRIMM model 1.107 monitor is designed to measure particle size distribution and particulate mass based on a light scattering measurement of individual particles in the sampled air. The design and operation of the instrument are described. Protocols used to convert the measured size number distribution to a mass concentration consistent with U.S. Environmental Protection Agency protocols for measuring particulate matter (PM) less than 10 μm (PM₁₀) and less than 2.5 μm (PM_2.5) in aerodynamic diameter are described. The performance of the resulting continuous monitor has been evaluated by comparing GRIMM monitor PM_2.5 measurements with results obtained by the Rupprecht and Patashnick Co. (R&P) filter dynamic measurement system (FDMS). Data were obtained during month-long studies in Rubidoux, CA, in July 2003 and in Fresno, CA, in December 2003. The results indicate that the GRIMM monitor does respond to total PM_2.5 mass, including the semi-volatile components, giving results comparable to the FDMS. The data also indicate that the monitor can be used to estimate water content of the fine particles. However, if the inlet to the monitor is heated, then the instrument measures only the nonvolatile material, more comparable to results obtained with a conventional heated filter tapered element oscillating microbalance (TEOM) monitor. A recent modification of the model 180, with a Nafion dryer at the inlet, measures total PM_2.5 including the nonvolatile and semi-volatile components, but excluding fine particulate water. Model 180 was in agreement with FDMS data obtained in Lindon, UT, during January through February 2007     

区域污染物总量控制绩效评估技术及动态化管理建议与对策研究（二）

首次指出了物元分析隶属函数及运算模型在区域污染物总量控制动态化管理中的应用.研究成果是对扬州市的10年污染物总量控制系统性、宏观性的展开,丰富了区域污染物总量控制的理论体系,且进一步表明：该成果不仅为污染物总量控制进行动态化、规范化管理提供了科学的技术支撑,也为促进区域经济结构调整和增长方式的转变,实施循环经济的决策提供了保障.     

Evaluation of biogas upgrading technologies and future perspectives: a review

Environmental Science and Pollution Research - Biogas is acknowledged as one of the foremost bioenergy to address the current environmental and energy challenges being faced by the world. Commonly,...     

The Southeastern Aerosol Research and Characterization Study,Part 3: Continuous Measurements of Fine Particulate Matter Mass and Composition

Abstract

Deployment of continuous analyzers in the Southeastern Aerosol Research and Characterization Study (SEARCH) network began in 1998 and continues today as new technologies are developed. Measurement of fine particulate matter (PM_2.5) mass is performed using a dried, 30 °C tapered element oscillating microbalance (TEOM). TEOM measurements are complemented by observations of light scattering by nephelometry. Measurements of major constituents include: (1) SO₄ ^2? via reduction to SO₂; (2) NH₄ ⁺ and NO₃ ^? via respective catalytic oxidation and reduction to NO, (3) black carbon (BC) by optical absorption, (4) total carbon by combustion to CO₂, and (5) organic carbon by difference between the latter two measurements. Several illustrative examples of continuous data from the SEARCH network are presented. A distinctive composite annual average diurnal pattern is observed for PM_2.5 mass, nitrate, and BC, likely indicating the influence of traffic-related emissions, growth, and break up of the boundary layer and formation of ammonium nitrate. Examination of PM_2.5 components indicates the need to better understand the continuous composition of the unmeasured “other” category, because it contributes a significant fraction to total mass during periods of high PM_2.5 loading. Selected episodes are presented to illustrate applications of SEARCH data. An SO₂ conversion rate of 0.2%/hr is derived from an observation of a plume from a coal-fired power plant during early spring, and the importance of local, rural sources of NH₃ to the formation of ammonium nitrate in particulate matter (PM) is demonstrated.     

A Comparison of the Spectral Distribution of Solar Radiation in a Polluted and a Clear Air Mass

Two spectroradiometer measurements are presented to illustrate differences in the spectrum of sunlight in the 0.45–0.7 μ band. Only two spectral observations are presented, one in an apparently clean cloud-free air mass, the other under a heavily polluted air mass. Both observations were taken near Houston, Texas, on 12 November 1968 at about 1800 GMT. A 23% loss in the intensity of light is attributed to attenuation by pollution in the atmosphere.     

Characterization of large particles at a rural site in the eastern United States: Mass distribution and individual particle analysis

A unique combination of an effective sampler and analysis of individual particles has been used in studying large particles (> 5 μm) at a rural site in eastern United States. The sampler is a modified ‘high volume’ rotary inertial impactor, which consists of four collectors of different widths, rotating at high speed and collecting particles by impaction. The collector surfaces were Mylar films coated with apiezon to ensure retention. After sampling, the collection surfaces were weighted to obtain the mass-size distribution. A section of the Mylar sample was transferred to a scanning electron microscope to study in detail the morphology and elemental content of individual particles.Results from two case studies indicated the following conclusions could be made:

• 1.(a) Natural sources, minerals and biologicals, were the main contributors to large particles (> 5 μm),
• 2.(b) Contribution of anthropogenic sources, mainly coal-fired power plants emitting fly ash particles, was limited to a few percent of the 5–10 μm size range,
• 3.(c) Pollen and some of the minerals were enriched in sulfur, probably as accumulation of sulfate on the particle surface,
• 4.(d) At low wind speeds the anthropogenic contribution was enhanced, whereas at high wind speeds natural sources were almost the only contributors to the large particle mode.

In both cases the mass distribution of the large particles peaked at around 15 μm.     

Mass balance of pharmaceutical and personal care products in a pilot-scale single-sludge system: influence of T, SRT and recirculation ratio

The influence of operation condition on the fate of 16 pharmaceutical and personal care products (PPCPs) in a single-sludge nitrifying/denitrifying pilot plant was assessed. Volatilisation, sorption and degradation were included in the mass balances to determine the most relevant removal mechanisms during PPCP treatment.Sludge retention time (SRT) was an important factor for the removal of compounds that significantly sorb onto sludge, as ethinylestradiol, whose removal increased 11% when working at SRT above 20 d. The internal recirculation ratio was significant for the removal of moderately biodegradable compounds, as citalopram. The positive effect of operating at warmer temperatures was particularly significant for two antibiotics, implying a 30% increase in their transformations. In the case of naproxen, an influence of sludge acclimation and concentration was observed, leading to removal efficiencies from 27% to 99%.Concerning removal mechanisms, most compounds were removed due to biotransformation, although for fragrances sorption and volatilisation played a role.     

The Southeastern Aerosol Research and Characterization Study: Part II. Filter-Based Measurements of Fine and Coarse Particulate Matter Mass and Composition

Abstract

The Southeastern Aerosol Research and Characterization Study (SEARCH) was implemented in 1998–1999 to provide data and analyses for the investigation of the sources, chemical speciation, and long-term trends of fine particulate matter (PM_2.5) and coarse particulate matter (PM_10–2.5) in the Southeastern United States. This work is an initial analysis of 5 years (1999–2003) of filter-based PM_2.5 and PM_10–2.5 data from SEARCH. We find that annual PM_2.5 design values were consistently above the National Ambient Air Quality Standards (NAAQS) 15 µg/m³ annual standard only at monitoring sites in the two largest urban areas (Atlanta, GA, and North Birmingham, AL). Other sites in the network had annual design values below the standard, and no site had daily design values above the NAAQS 65 µg/m³ daily standard. Using a particle composition monitor designed specifically for SEARCH, we found that volatilization losses of nitrate, ammonium, and organic carbon must be accounted for to accurately characterize atmospheric particulate matter. In particular, the federal reference method for PM_2.5 underestimates mass by 3–7% as a result of these volatilization losses. Organic matter (OM) and sulfate account for ≥60% of PM_2.5 mass at SEARCH sites, whereas major metal oxides (MMO) and unidentified components (“other”) account for ≥80% of PM_10–2.5 mass. Limited data suggest that much of the unidentified mass in PM_10–2.5 may be OM. For paired comparisons of urban-rural sites, differences in PM_2.5 mass are explained, in large part, by higher OM and black carbon at the urban site. For PM₁₀, higher urban concentrations are explained by higher MMO and “other.” Annual means for PM_2.5 and PM_10–2.5 mass and major components demonstrate substantial declines at all of the SEARCH sites over the 1999–2003 period (10–20% in the case of PM_2.5, dominated by 14–20% declines in sulfate and 11–26% declines in OM, and 14–25% in the case of PM_10–2.5, dominated by 17–30% declines in MMO and 14–31% declines in “ other”). Although declining national emissions of sulfur dioxide and anthropogenic carbon may account for a portion of the observed declines, additional investigation will be necessary to establish a quantitative assessment, especially regarding trends in local and regional emissions, primary carbon emissions, and meteorology.