CRC-APRAC Vehicle Emissions Modeling Workshop

A conference was held on October 30-31,1990 to examine discrepancies between the output of vehicle emission factor models (MOBILE and EMFAC), field and laboratory measurements of vehicle emissions, and observed ratios of pollutants in urban atmospheres dominated by vehicle emissions. There was a general consensus that significant discrepancies exist and that these discrepancies must be resolved. A number of research recommendations were made as to how models and model inputs could be improved, and what additional laboratory and field work should be conducted.     

Real-World Vehicle Emissions: A Summary of the Sixth Coordinating Research Council On-Road Vehicle Emissions Workshop

The Coordinating Research Council (CRC) has conducted a series of workshops on real-world vehicle emissions. This article summarizes findings from the most recent research regarding on-road emissions from mobile sources, presented at the CRC workshop held in March 1996. Among the topics discussed were efforts to improve and update emission models, results from field studies designed to understand the contribution of mobile sources to emission inventories, results from gas-and particle-phase emissions studies from in-use motor vehicles, and areas of future research.

The Sixth Coordinating Research Council (CRC) On-Road Vehicle Emissions Workshop was held March 18-20, 1996, in San Diego, CA. More than 160 representatives from academia, industry, government, and consulting firms in the United States, Canada, and Europe participated in the three-day meeting. The objective of the Workshop was to present the most recent information from research programs on:

mobile source contributions to the emission inventory

emission factor models and activity data

model comparison and development

emission reduction programs

new developments in remote sensing

studies of on-road vehicle exhaust and non-tailpipe emissions

off-cycle Federal Test Procedure (FTP) studies and revisions to the FTP

particle emissions from the light- and heavy-duty fleets

future research needs

Nine sessions were devoted to vehicle emissions models, improvements to the emission inventory, on-road and tunnel studies, off-cycle emissions, non-tailpipe and diesel emissions, emission reduction programs, and remote sensing. Overall workshop coordination was provided by Timothy Belian and the CRC staff, with Steven Cadle and Robert Gorse serving as cochairmen. Individual session chairmen were Brent Bailey (National Renewable Energy Laboratory), Mark Carlock (California Air Resources Board), Harold Haskew (General Motors), Kenneth Knapp and Philip Lorang (U.S. Environmental Protection Agency), Douglas Lawson (Colorado State University), Alan Lloyd (Desert Research Institute), Robert Slott (Shell Oil), and Timothy Truex (University of California, Riverside). In addition, during the Workshop, Lesha Hrynchuk of the California Air Resources Board (CARB) presented a hands-on demonstration using the Internet to obtain motor vehicle emissions information from groups throughout the world. The complete Workshop proceedings are available from the Coordinating Research Council, 219 Perimeter Center Parkway, Atlanta, GA 30346; phone: (770) 396-3400; fax: (770) 396-3404. The following summarizes each session and includes a short synopsis of all the papers that were presented.     

Real-World Vehicle Emissions: A Summary of the Ninth Coordinating Research Council On-Road Vehicle Emissions Workshop

ABSTRACT

In April 1999, the Coordinating Research Council sponsored a workshop focusing on our understanding of real-world emissions from motor vehicles. This summary presents the latest information on in-use light- and heavy-duty vehicle tailpipe and evaporative emissions, the effects of fuels on emissions, field programs designed to understand the contribution of mobile sources to emission inventories, efforts to evaluate and improve mobile source emission models, progress of vehicle inspection/ maintenance programs, and topics for future research. While significant progress has been made in understanding in-use vehicle emissions, further improvements are necessary. Moreover, the impact of current and future changes in emission control technologies and control programs will have to be monitored for effectiveness and incorporated into the emission factor models.     

Real-World Vehicle Emissions: A Summary of the Tenth Coordinating Research Council On-Road Vehicle Emissions Workshop

ABSTRACT

The Coordinating Research Council (CRC) held its tenth workshop in March 2000, focusing on results from the most recent real-world vehicle emissions research. In this paper, we summarize the presentations from researchers who are engaged in improving our understanding of the contribution of mobile sources to emission inventories. Participants in the workshop discussed efforts to improve mobile source emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles, new methods for measuring mobile source emissions, improvements in vehicle emission control systems (ECSs), and evaluation of motor vehicle inspection/maintenance (I/M) programs, as well as topics for future research.     

Urban CO Concentrations and Vehicle Emissions

The effect of the general growth of CO vehicular emissions in urban areas on the CAMP station measurements in downtown areas, where vehicular traffic is saturated is considered. With the assumption that the street-level CO concentration is derived from the sum of an urban background term and a local street-effect term, the urban background CO concentration is computed with a diffusion model by introducing a simple area source distribution. The local street-effect term is taken to be constant at a saturation emission level corresponding to a saturation traffic density when the emission per vehicle-mile and meteorological conditions are fixed. The present analysis indicates that the local street-effect term, AC, has a major role in determining street-level concentrations for pollutants, such as CO, whose air quality standard is based on maximum concentrations with averaging times of 1 hour and 8 hours. The relevance of this analysis to the abatement requirements of the Clean Air Amendments and to the driving cycle adopted is discussed.     

Status of Control of Motor Vehicle Emissions in California

The State of California, because of an acute air pollution problem has been forced to move ahead on a pioneer basis to control motor vehicle emissions. The Golden State’s program, as put into operation by the Motor Vehicle Pollution Control Board, is discussed in detail. Inspection-installation stations, enforcement and legal requirements relating to crankcase control devices and other facets of the program are presented. Of particular importance is the experience gained by the Board in requiring devices on all new vehicles registered in California and its used vehicle program, affecting vehicles back to the 1950 model year. Recent developments in exhaust control, anticipated installation requirements, and scheduling, as well as an indication of staff long-term planning is also outlined. California’s program is based on the principle that the motor vehicle must be controlled and that sewage no longer can be dumped into the air, if the public health is to be preserved.     

The Influence of Vehicle Operating Variables on Exhaust Emissions

This paper is a report of the operating variables and emission characteristics of a 1964 283 cubic inch V-8 Chevrolet automobile. This vehicle was used as a laboratory tool in a project to develop an improved driving cycle to represent Los Angeles peak hour driving. As a result it became necessary to run many exploratory tests to determine the relationships between the primary variables of intake manifold vacuum, engine rpm, and vehicle speeds and acceleration rates. Emissions of hydrocarbons, carbon monoxide, and nitrogen oxides were also determined for the entire range of operating conditions. The effect of prior operating modes on closed-throttle unburned hydrocarbon concentrations was also determined. The results of these tests are presented in tables and graphs which make a comprehensive picture of one typical automobile as a generator of air pollutants.     

On-Road Measurement of Vehicle Tailpipe Emissions Using a Portable Instrument

Abstract

A study design procedure was developed and demonstrated for the deployment of portable onboard tailpipe emissions measurement systems for selected highway vehicles fueled by gasoline and E85 (a blend of 85% ethanol and 15% gasoline). Data collection, screening, processing, and analysis protocols were developed to assure data quality and to provide insights regarding quantification of real-world intravehicle variability in hot-stabilized emissions. Onboard systems provide representative real-world emissions measurements; however, onboard field studies are challenged by the observable but uncontrollable nature of traffic flow and ambient conditions. By characterizing intravehicle variability based on repeated data collection runs with the same driver/vehicle/route combinations, this study establishes the ability to develop stable modal emissions rates for idle, acceleration, cruise, and deceleration even in the face of uncontrollable external factors. For example, a consistent finding is that average emissions during acceleration are typically 5 times greater than during idle for hydrocarbons and carbon dioxide and 10 times greater for nitric oxide and carbon monoxide. A statistical method for comparing on-road emissions of different drivers is presented. Onboard data demonstrate the importance of accounting for the episodic nature of real-world emissions to help develop appropriate traffic and air quality management strategies.     

A Characterization of Emissions from an Early Model Flexible-Fuel Vehicle

An emission study was conducted on a 1987 Ford Crown Victoria flexible-fuel vehicle, an early prototype which had been driven about 25,000 miles. The vehicle was run on both gasoline and a blend of 85 percent methanol and 15 percent gasoline. Emission rates of regulated pollutants (hydrocarbons, carbon monoxide, nitrogen oxides, formaldehyde, and methanol) and nonregulated pollutants (speciated organic materials) were determined for both exhaust and evaporative emissions. Tests were run varying the driving cycle, ambient temperature and catalytic converter. In general, hydrocarbon composition of exhaust emissions was significantly affected by catalyst replacement and cold starts, slightly affected by driving schedule, and unaffected by ambient temperature and test fuel. Hydrocarbon composition of evaporative emissions was only sensitive to the type of evaporative test being performed: diurnal tests typically had larger fractions of lower molecular weight paraffins than hot soak tests.     

Impact of Alternative Fuels on Vehicle Emissions of Greenhouse Gases

Abstract

The conversion of methane to liquid products, hydrogen (H₂), and ammonia (NH₃) was investigated experimentally using microgap discharge plasma at an environmentally friendly condition. The experimental results indicated that H₂ and NH₃ were detected as the main gas products. The highest yield and production rate of H₂ was 14.4% (v/v) and 2974.6 μmol/min, respectively, whereas the highest yield and production rate of NH₃ was 8000 ppm (v/v) and 165.1 μmol/min, respectively. Particularly, the liquid products were collected on the plate and consisted of pyrrole, 2-methyl-1,4-pentadiene, α-amidopyri-dine, 2,5-dimethylpyrrole, methylpyrazine, 1-hexyne, 1,4-heptadiene, and polycyclic organic compounds. Some liquid products were the intermediates of drug, ?avor, dye, and organic synthesis, as well as edible ?avor. The collection efficiency in mass and energy efficiency were 26.3% at once and 22.9 g/kWh, respectively. The whole reaction process was considered to be in line with green chemistry principles.     

Daily Variability of Motor Vehicle Emissions Derived from Traffic Counter Data

ABSTRACT

This work studied the daily variability of mobile sources in rural and urban areas, in and around the Atlanta Metropolitan Area. Traffic counter data collected during the 1992 Southern Oxidants Study Atlanta Intensive Study were used to analyze the spatial and temporal distribution of traffic volume. A simple method to study the daily variability of mobile emissions from the different types of urban and rural roads is presented. The method is based on hourly traffic volume data and emission factors and it has been generalized to describe the daily variability of mobile emissions for urban and rural areas and for the whole modeling domain. Implications of this study for improving mobile emission inventories are also discussed.     

Characterization of On-Road Vehicle NO Emissions by a TILDAS Remote Sensor

ABSTRACT

A tunable infrared laser differential absorption spectrometer (TILDAS) was used to remotely sense the nitric oxide (NO) emissions from 1,473 on-road vehicles. The real-world measurement precision of this instrument in the limit of low NO concentration is 5 ppm of the vehicle exhaust, which corresponds to a 3o detection limit of 15 ppm. Our analysis of the distribution of negative concentration measurements produced during this experiment supports this claim, showing that the instrumental noise for this set of measurements was at most 8 ppm in the limit of low NO concentration. The high sensitivity of this instrument allowed us to measure the NO emissions of even the cleanest vehicles. The measured vehicle fleet NO emissions closely fit a gamma distribution with 10% of the fleet contributing about 50% of the total fleet emissions. Newer vehicles had lower NO emissions than older ones, but high NO emitters were found in every vehicle age cohort. On a vehicle-by-vehicle basis, NO emissions correlated very weakly with vehicle velocity, acceleration, power per unit mass, carbon monoxide (CO) emissions, and hydrocarbon (HC) emissions. High NO emitting vehicles could not be identified by remote sensing of CO or HC emissions and vice versa. When we compared the NO emissions for 117 vehicles measured more than one time, about half of the high NO emitters were found to be very consistent, while the other half varied significantly.     

Real-World Emissions from a Modern Production Vehicle Driven in Los Angeles

The emissions of hydrocarbons, nitric oxide, and carbon monoxide from one modern vehicle were measured using on-board instrumentation during about 350 miles of driving in Los Angeles, California. Emissions during on-road driving were compared to those obtained on dynamometers using the urban dynamometer driving schedule (UDDS). Although this study only used one driver and vehicle, tested over a relatively short distance, the analysis technique may be useful for a larger evaluation of off-cycle emissions.

The test vehicle had low warmed-up running emissions over the UDDS and for most of the on-road testing where the air-to-fuel ratio was maintained at the stoichiometric point. However, occasional heavily-loaded conditions during the on-road testing led to richerthan-stoiehiometric operation.

During these brief enrichment events, which lasted up to 29 seconds, CO emissions were increased by a factor of 2500 and HC by a factor of 40 over closed-loop stoichiometric operation. Nitrogen oxide emissions were similar during low-load stoichiometric operation and high-load enriched operation. The relatively constant gram-per-second emission rate of CO and HC observed during enriched operation suggests that such information can be combined with determinations of the frequency of enrichment for a large number of vehicles with similar calibrations to estimate the impact of the additional emissions from enrichment on emissions inventories.     

An Integrated Modeling System for the Estimation of Motor Vehicle Emissions

ABSTRACT

The paper provides a summary of accomplished and ongoing activities in the field of motor vehicle emission modeling in Europe. These activities have led to the development of a system of methods and conesponding computer models that address all the issues related to motor vehicle emissions that are of interest to policy-makers, institutions, and the automotive and oil industries. The Coordination of Information on Air Emissions/Computer Program to Calculate Emissions from Road Traffic (CORLNAIR/COPERT) methodology for the estimation of emissions from road vehicles is presented and compared with other models. A COPERT-based approach for microscale traffic emission estimation, with direct application in regional and urban emission inventories, is outlined, and relevant case studies are briefly discussed. The FOREMOVE model, developed for forecasts of motor vehicle emissions, is presented, together with some results from its application in the European Auto/Oil program. Particular attention is given to modeling the deterioration of in-use vehicles. Finally, the major areas of further research in the field of vehicle emissions in Europe are indicated.     

Remote Sensing Data and a Potential Model of Vehicle Exhaust Emissions

In June 1991, General Motors Research and Development Center (GMR&D) participated in a remote sensing study conducted by the California Air Resources Board and the U. S. Environmental Protection Agency. During this study, the GMR&D remote sensor was used to measure the carbon monoxide (CO) and hydrocarbon (HC) emissions from approximately 15,000 vehicles. The vehicle type (passenger car, light-duty truck, or medium/heavy-duty truck), manufacturer, and model year were identified for each vehicle by acquiring registration data from the state of California. Analyses were performed separately for each vehicle type and for passenger cars by separate model years. The data indicate that the passenger cars with the highest 10% of CO emissions generated approximately 58% of the total CO from all cars. Similarly, the 10% highest HC-emitting cars generated 65% of the total HC from cars. It was found that for each model year of vehicle, the distribution of emission concentrations followed a logarithmic relationship. The logarithmic functions that describe these relationships can be used to estimate the fraction of vehicles that emitted at or above any given concentration of CO or HC. However, these logarithmic functions only describe measured distributions for vehicles emitting more than 1% CO and 0.015% HC.     

On-Road Motor Vehicle Emissions and Fuel Consumption in Urban Driving Conditions

ABSTRACT

This paper reports on the analysis of on-road vehicle speed, emission, and fuel consumption data collected by four instrumented vehicles. Time-, distance-, and fuel-based average fuel consumption, as well as CO, HC, NO_x, and soot emission factors, were derived. The influences of instantaneous vehicle speed on emissions and fuel consumption were studied. It was found that the fuel-based emission factors varied much less than the time- and distance-based emission factors as instantaneous speed changed. The trends are similar to the results obtained from laboratory tests. The low driving speed contributed to a significant portion of the total emissions over a trip. Furthermore, the on-road data were analyzed using the modal approach. The four standard driving modes are acceleration, cruising, deceleration, and idling. It was found that the transient driving modes (i.e., acceleration and deceleration) were more polluting than the steady-speed driving modes (i.e., cruising and idling) in terms of g/km and g/ sec. These results indicated that the on-road emission measurement is feasible in deriving vehicle emissions and fuel consumption factors in urban driving conditions.     

The Impact of California Phase 2 Reformulated Gasoline on Real-World Vehicle Emissions

ABSTRACT

In mid-1996, California implemented Phase 2 Reformulated Gasoline (RFG). The new fuel was designed to further decrease emissions of hydrocarbons (HC_s), oxides of nitrogen (NO_x), carbon monoxide (CO), sulfur dioxide (SO₂), and other toxic species. In addition, it was formulated to reduce the ozone-forming potential of the HCs emitted by vehicles. Previous studies have observed that emissions from on-road vehicles can differ significantly from those predicted by mobile source emissions models, and so it is important to quantify the change in emissions in a real-world setting. In October 1995, prior to the introduction of California Phase 2 RFG, the Desert Research Institute (DRI) performed a study of vehicle emissions in Los Angeles' Sepulveda Tunnel. This study provided a baseline against which the results of a second experiment, conducted in July 1996, could be compared to evaluate the impact of California Phase 2 RFG on emissions from real-world vehicles. Compared with the 1995 experiment, CO and NO_x emissions exhibited statistically significant decreases, while the decrease in non-methane hydrocarbon emissions was not statistically significant.

Changes in the speciated HC emissions were evaluated. The benzene emission rate decreased by 27% and the overall emission rate of aromatic compounds decreased by 22% comparing the runs with similar speeds. Emissions of alkenes were virtually unchanged; however, emissions of combustion related unsaturates (e.g., acetylene, ethene) increased, while heavier alkenes decreased. The emission rate of methyl tertiary butyl ether (MTBE) exhibited a larger increase. Overall changes in the ozone-forming potential of the emissions were not significantly different, with the increased contributions to reactivity from paraffins, ole-fins, and MTBE being offset by a large decrease in reactivity due to aromatics.