Characterization of Fugitive Material within a Primary Lead Smelter

ABSTRACT

The primary production of Pb via the sinter plant-blast furnace method resulted in a large number of Pb and other phases, reflecting the complex reactions occurring within each of the processes. Optical microscopy and X-ray diffraction (XRD) techniques have been used to characterize fugitive emissions and dusts generated during sintering, smelting, Cu drossing, refining, and slag fuming at a primary Pb-Zn smelter. The results displayed a complex array of phases, with the mineralogy of the dusts and fume reflecting conditions of the particular metallurgical operation. The principal Pb species followed a transformation from PbS through PbSO₄ and PbO to Pb° (metal) from raw materials to the refinery. The fugitive emissions generated by the blast furnace were of a finer size with more complex chemistry than fugitive material from other source areas. XRD identified a mixture of PbS, ZnO, and ZnS, associated with one or more of the Cl-bearing phases Pb(OH)Cl, PbCl₂, Pb₄O₃Cl₂, Na₃Pb₂(SO₄)₃Cl, Pb₁₀(SO₄)Cl₂O₈, Pb₄SCl₆, and Pb₇S₂Cl₁₀. The presence of Cl-bearing phases in the fume has possible health implications.     

The Capture of Heavy Metals from Incineration Using a Spray Dryer Integrated with a Fabric Filter Using Various Additives

ABSTRACT

This study investigated the effects of feedstock additives [polyvinyl chloride (PVC) and NaCl] and spray dryer additives (SiO₂, CaCl₂, NaHCO₃) on heavy metal and fly ash removal efficiencies, and on particle size distribution of heavy metals. A spray dryer with an integrated fabric filter was used as an air pollution control device (APCD). Removal efficiencies for fly ash and heavy metals were greater than 95 and 90%, respectively. When additives of PVC or NaCl were used, the concentration of heavy metals distributed in fly ash apparently varied when the particle diameter was <1 μm. Although the effects of the additives SiO₂, CaCl₂, and NaHCO₃ on the elemental size distribution of Cr were insignificant, these additives did slightly increase concentrations of Cd, Zn, and Pb partitioning in coarser particles (>1μm).     

1985 Directory of Governmental Air Pollution Control Agencies

Abstract

Clay that contains kaolinite has been used extensively as a raw material for manufacturing of bricks and china at 900–1100 °C. This study used clay to stabilize the contaminant chromium(VI) [Cr(VI)] through a heating process at 500–1100 °C. X-ray absorption spectroscopic results indicated that the 500–900 °C heating process transformed hazardous Cr(VI) to nontoxic Cr(III); Cr₂O₃ was the species detected as most abundant. The 1100 °C heating process caused the formation of Cr₂SiO₅, which was not detected in the samples heated at 500–900 °C. Fourier transformed extended X-ray absorption fine structure spectra were fitted by use of WinXAS software. Phase shifts and backscatter(ing) amplitudes for specific atom pairs, based on the crystallographic data for CrO₃ and Cr₂O₃, were theoretically calculated with the FEFF software. The processed XAS data show that the first shell coordination numbers were similar to each other as the temperature was increased from 500 to 900 °C and 1100 °C, implying that their Cr(III) crystallite size was relatively similar. The interatomic distance between the target center element and the first shell for the 500– 1100 °C samples was 1.98Å. The Debye-Waller factor for the 1100 °C sample was increased compared with the 500 and 900 °C samples and probably indicates the formation of Cr₂SiO₅.     

Exogenously applied calcium alleviates cadmium toxicity in Matricaria chamomilla L. plants

Cadmium (Cd) toxicity in plants leads to serious disturbances of physiological processes, such as inhibition of chlorophyll synthesis, oxidative injury to the plant cells and water and nutrient uptake. Response of Matricaria chamomilla L. to calcium chloride (CaCl₂) enrichment in growth medium for reducing Cd toxicity were studied in this study. Hydroponically cultured seedlings were treated with 0, 0.1, 1, and 5 mM CaCl₂, under 0, 120, and 180 μM CdCl₂ conditions, respectively. The study included measurements pertaining to physiological attributes such as growth parameters, Cd concentration and translocation, oxidative stress, and accumulation of phenolics. Addition of CaCl₂ to growth media decreased the Cd concentration, activity of antioxidant enzymes, and reactive oxygen species accumulation in the plants treated with different CdCl₂, but increased the growth parameters. Malondialdehyde and total phenolics in shoots and roots were not much affected when plants were treated only with different CaCl₂ levels, but it showed a rapid increase when the plants were exposed to 120 and 180 CdCl₂ levels. CaCl₂ amendment also ameliorated the CdCl₂-induced stress by reducing oxidative injury. The beneficial effects of CaCl₂ in ameliorating CdCl₂ toxicity can be attributed to the Ca-induced reduction of Cd concentration, by reducing the cell-surface negativity and competing for Cd²⁺ ion influx, activity enhancement of antioxidant enzymes, and biomass accumulation.     

Interaction of Cr(VI) species with thermally treated brick clay

Purpose  

The purpose this research is to investigate the interaction of Cr(VI) species, present as Cr₂O₇²⁻, at ambient temperature with brick clay pre-fired at different temperatures.     

Identification of sources of pollutants in precipitation measured at the mid-Atlantic US coast using potential source contribution function (PSCF)

Potential source contribution function (PSCF) was employed to study the source receptor relationships for 14 chemical species (Mn, SO₄²⁻, Zn, Al, Fe, Cu, Cr, Ni, Cd, NO₃, NH₄⁺, K⁺, Mg²⁺,and Pb) found in precipitation collected at Lewes, Delaware. This study identified areas of the Eastern United States as possible emission source areas that could have contributed to the 14 element concentrations observed at Lewes. The identified regions in the Eastern United States generally coincide well with known emission source areas. The likely emission sources for these chemical species include oil- and coal-fired power plants, incinerators, motor vehicles, and iron and steel mills.     

Benzene and toluene influence with or without nitrogen dioxide on inorganic pigments of works of art—Part II

Air pollution has a great impact on the social and economic aspects all over the world. In order to account the human interaction with the atmospheric environment, a suitable scientific basis is needed.That is why six physicochemical quantities have been determined in a previous work for each one heterogeneous system between organic volatile pollutants and oxide-pigments of works of art. This investigation is extended in order to determine experimentally five new ones. Thus, a more precise contribution to the elucidation of the mechanism of the deterioration of various works of art in museums is achieved. These physicochemical quantities are: (1) local adsorption energies, (2) local monolayer capacities, (3) local adsorption isotherms, (4) density probability function, and (5) pollutant concentration on the oxide-pigment at equilibrium. All these adsorption parameters mentioned above have been calculated as a function of experimental time for the systems: C₆H₆/TiO_2, C₆H₆/NO₂/TiO_2, C₆H₆/Cr₂O_3, C₆H₆/NO₂/Cr₂O_3, C₆H₅CH₃/TiO_2, C₆H₅CH₃/NO₂/TiO_2, C₆H₅CH₃/Cr₂O_3, C₆H₅CH₃/NO₂/Cr₂O_3, C₆H₆/PbO, C₆H₆/NO₂/PbO, C₆H₅CH₃/PbO, and C₆H₅CH₃/NO₂/PbO for the first time. Thus, in this work we shall stress the recent new aspect of Reversed Flow-(Inverse) Gas Chromatography (RF-GC or RF-IGC), i.e. the time-resolved chromatography related to the evaluation of some important adsorption parameters. Gas Chromatography is a promising meeting place of surface science and atmospheric chemistry.     

Salinity increases mobility of heavy metals in soils

The effect of salinity induced by CaCl₂, MgCl₂, NaCl and Na₂SO₄ on the mobility of Cu, Cd, Pb and Zn was studied. An increase of ionic strength by any salts promoted a higher release of Cd than the others metals. When CaCl₂ and NaCl were applied, Cd and Pb showed the highest degree of mobilization. When MgCl₂ was applied, Cd and Cu were mobilized the most. Finally, an increase of Na₂SO₄ also promoted the strongest mobilization of Cd and Cu.As the total heavy metal content was higher, the percentage of Pb and Cu released upon salinization decreased, indicating that these metals are strongly bound to soil constituents. An increase of carbonates in the soil promoted a higher release of Pb for all used salts and for Zn when MgCl₂ and NaCl were used. This indicates that Pb and Zn are adsorbed on the surface of carbonate crystals. An increase of fine particles promoted a decrease of percentage of released Cd for all salts, indicating that Cd is strongly retained in the fine fractions.The main mechanism regulating Pb and Cd mobility was competition with Ca²⁺ for sorption sites followed for metal chloro-complexation, association between the Cd/Pb-sulfates and competition with Mg²⁺. The main mechanism regulating Cu mobility was the formation of Cu-sulfate, followed by competition with cations (Mg > Ca) and chloride. For Zn, competition with Ca²⁺ for sorption sites was the most important process for its mobility; followed by Zn-sulfate association and, finally, chloride and competition with Mg with the same effect.     

Airborne foliar transfer of particular metals in Lactuca sativa L.: translocation,phytotoxicity, and bioaccessibility

The uptake, translocation, and human bioaccessibility of metals originating from atmospheric fine particulate matters (PM) after foliar exposure is not well understood. Lettuce (Lactuca sativa L.) plants were exposed to micronic PbO, CuO, and CdO particulate matters (PMs) by the foliar pathway and mature plants (6 weeks old) were analyzed in terms of: (1) metal accumulation and localization on plant leaf surface, and metal translocation factor (TF) and global enrichment factor (GEF) in the plants; (2) shoot growth, plant dry weight (DW), net photosynthesis (Pn), stomatal conductance (Gs), and fatty acid ratio; (3) metal bioaccessibility in the plants and soil; and (4) the hazard quotient (HQ) associated with consumption of contaminated plants. Substantial levels of metals were observed in the directly exposed edible leaves and newly formed leaves of lettuce, highlighting both the possible metal transfers throughout the plant and the potential for human exposure after plant ingestion. No significant changes were observed in plant biomass after exposure to PbO, CuO, and CdO-PMs. The Gs and fatty acid ratio were increased in leaves after metal exposure. A dilution effect after foliar uptake was suggested which could alleviate metal phytotoxicity to some degree. However, plant shoot growth and Pn were inhibited when the plants are exposed to PbO, and necrosis enriched with Cd was observed on the leaf surface. Gastric bioaccessibility of plant leaves is ranked: Cd?>?Cu?>?Pb. Our results highlight a serious health risk of PbO, CuO, and CdO-PMs associated with consumption of vegetables exposed to these metals, even in newly formed leaves in the case of PbO and CdO exposure. Finally, the study highlights the fate and toxicity of metal rich-PMs, especially in the highly populated urban areas which are increasingly cultivated to promote local food.

     

Removal of Chromium from Abrasive Blast Media by Leaching and Electrochemical Precipitation

ABSTRACT

Water is effective in leaching out Cr⁶⁺ from a mixture of paint powders and abrasive blast media. However, acids such as HNO₃, HCl, and H₂SO₄ significantly enhance the leaching procedure. Cr ions in the leaching solutions are successfully removed by electrochemical precipitation. The consumable Fe electrodes generate ferrous ions to cause the reduction of Cr⁶+ to Cr³+. Cr³+ ions along with Fe²+ and Fe³+ are then removed mainly by precipitation as Cr(OH)₃, Fe(OH)₂, and Fe(OH)₃ near the cathode where OH^- ions are generated by water electrolysis. The electrochemical process is capable of discharging low levels of Cr⁶+, less than 1 mg/L, without pH adjustment.     

The critical levels and the maximum metal uptake for wheat and rice plants when applying metal oxides to soil

Abstract

Wheat is more sensitivity to CdO and ZnO compared with rice plant. The yield of wheat decreased by 30% in the presence of 30 ppm Cd, but that of rice plants by only 8%. The critical levels of meal uptake by wheat and rice plants for applying metal oxides to soil (CdO, ZnO, PbO) were determined. The highest concentration obtained for wheat grain was 141 μg/g Cd at the Cd 10,000 ppm in soil. This value is higher the value of 4.97 μg/g for unpolished rice and higher than any other we have seen in the reports for treatment with CdO. Also, as concentration of more than 1.0 μg/g Cd in wheat was obsertced at 5 ppm Cd, while similar concentrations for rice plants were observed at 30 ppm Cd in soil.     

The capture of heavy metals from incineration using a spray dryer integrated with a fabric filter using various additives

This study investigated the effects of feedstock additives [polyvinyl chloride (PVC) and NaCl] and spray dryer additives (SiO2, CaCl2, NaHCO3) on heavy metal and fly ash removal efficiencies, and on particle size distribution of heavy metals. A spray dryer with an integrated fabric filter was used as an air pollution control device (APCD). Removal efficiencies for fly ash and heavy metals were greater than 95 and 90%, respectively. When additives of PVC or NaCl were used, the concentration of heavy metals distributed in fly ash apparently varied when the particle diameter was <1 microm. Although the effects of the additives SiO2, CaCl2, and NaHCO3 on the elemental size distribution of Cr were insignificant, these additives did slightly increase concentrations of Cd, Zn, and Pb partitioning in coarser particles (>1 microm).     

Nopalea cochenillifera, a potential chromium (VI) hyperaccumulator plant

Hexavalant chromium [Cr(VI)] tolerance and accumulation in in vitro grown Nopalea cochenillifera Salm. Dyck. plants was investigated. A micropropagation protocol was establish for a rapid multiplication of N. cochenillifera and [Cr(VI)] tolerance and accumulation was studied in in vitro grown cultures. Cr concentration was estimated by atomic absorption spectroscopy in roots and shoots to confirm plant’s hyperaccumulation capacity. Plants showed tolerance up to 100 μM K₂Cr₂O₇ without any significant changes in root growth after 16 days treatment; whereas, chlorophyll content in plants treated with 1 and 10 μM K₂Cr₂O₇ were not so different than the control plant. The levels of lipid peroxidation and protein oxidation increased significantly (p?<?0.01) with increasing concentration of chromium. Exposures of N. cochenillifera to lower concentrations of K₂Cr₂O₇ (≤10 μM) induced catalase (CAT) and superoxide dismutase (SOD) significantly (p?<?0.001) but higher concentrations of K₂Cr₂O₇ (>100 μM) inhibited the activities of CAT and SOD. Roots accumulated a maximum of 25,263.396?±?1,722.672 mg?Cr?Kg^?1 dry weight (DW); while the highest concentration of Cr in N. cochenillifera shoots was 705.714?±?32.324 mg?Cr?Kg^?1?DW. N. cochenillifera could be a prospective hyperaccumulator plant of Cr(VI) and a promising candidate for phytoremediation purposes.     

Chemical characteristics of precipitation at metropolitan Newark in the US East Coast

To investigate the chemical characteristics of precipitation in the polluted coastal atmosphere, a total of 46 event-based precipitation samples were collected using a wet-only automatic precipitation collector from September 2006 to October 2007 at metropolitan Newark, New Jersey in the US East Coast. Samples were analyzed by ion chromatography for the concentrations of major inorganic ions (Cl⁻, NO₃⁻, SO₄²⁻, F⁻, NH₄⁺, Ca²⁺, Mg²⁺, Na⁺, K⁺) and organic acid species (CH₃COO⁻, HCOO⁻, CH₂(COO)₂²⁻, C₂O₄²⁻). Selected trace metals (Sb, Pb, Al, V, Fe, Cr, Co, Ni, Cu, Zn, Cd) in samples were determined by ICPMS. Mass concentration results show that SO₄²⁻ was the most dominant anion accounting for 51% of the total anions, controlling the acidity of the precipitation. NH₄⁺ accounted for 48.6% of the total cations, dominating the precipitation neutralization. CH₃COO⁻ and HCOO⁻ were the two dominant water-soluble organic acid species, accounting for 42% and 40% of the total organic acids analyzed, respectively. Al, Zn and Fe were the three major trace metals in precipitation, accounting for 34%, 27%, and 25% of the total mass of metals analyzed. The pH values in precipitation ranged from 4.4 to 4.9, indicating an acidic nature. Enrichment Factor (EF) Analysis showed that Na⁺, Cl⁻, Mg²⁺ and K⁺ in the precipitation were primarily of marine origin, while most of the Fe, Co and Al were from crust sources. Pb, V, Cr, Ni were moderately enriched with EFs ranging 43–410, while Zn, Sb, Cu, Cd and F⁻ were highly enriched with EFs > 700, indicating significant anthropogenic influences. Factor analysis suggests 6 major sources contributing to the observed composition of precipitation at this location: (1) nitrogen-enriched soil, (2) secondary pollution processes, (3) marine sources, (4) incinerations, (5) oil combustions, and (6) malonate–vanadium enriched sources. To further explore the source–precipitation event relationships and seasonality, cluster analysis was performed for all precipitation events. Results show that about half of the precipitation events were characterized by mixed sources. Significant influences of nitrogen-enriched soil and marine sources were associated with precipitation events in spring and autumn, while secondary pollution processes, incineration and oil combustion contributed greatly in summer.     

Heavy metal tolerance of rice plants (Oryza sativa L.) to some metal oxides at the critical levels

The toxicity of metal oxides (CdO, ZnO, PbO) were compared with each other and the critical levels of metal uptake by rice plants were determined. The order of metal toxicity to rice plants is CdO greater than ZnO greater than PbO. The highest concentration obtained for unpolished rice was 4.97 micrograms/g at the Cd 10,000 ppm in soil. This values is higher than every other we have seen in the reports for treatment with CdO. We are able to find out that the concentration of 10,000 ppm Cd in the form of CdO in the critical one towards rice plant. By contrast, such damage was not observed at even higher levels of ZnO and PbO were considered to have low toxicity toward rice plant. Also, a negative correlation between Zn or Cu accumulation in rice plants and Cd concentration in soil was found.     

复合纳米材料对土壤重金属离子吸持固化的模拟研究

土壤中过量重金属离子可通过食物链和地表水系统危害人群健康。通过土柱淋溶模拟实验,研究了SiO2-Al2O3-Fe2O3等复合纳米材料对土壤溶液中Cu2+、Cd2+、Pb2+、Zn2+和Ni2+的吸持与固化特征。分别向重金属含量4倍于土壤二级标准(GB15618-1995)的土壤中添加0%、4%、6%和10%的复合纳米材料,分析不同深度土壤渗滤液以及土柱上栽培植物不同部位中重金属的含量。结果表明,碱性壤质土壤中重金属向下的迁移量很少;在含4%复合纳米材料土柱中,其吸持固化土壤溶液中63%的Cu、79%的Cd、68%的Pb、89%的Zn和76%的Ni;在含6%复合纳米材料土柱中,其吸持固化土壤溶液中82%的Cu、92%的Cd、76%的Pb、91%的Zn和88%的Ni;再增加土柱中复合纳米材料的含量,其吸持固化效果并不再显著增加。     

Accumulation and spatial distribution of Cd, Cr, and Pb in mulberry from municipal solid waste compost following application of EDTA and (NH4)2SO4

Municipal solid waste compost can be used to cropland as soil amendment to supply nutrients and improve soil physical properties. But long-term application of municipal solid waste (MSW) compost may result in accumulation of toxic metals in amended soil. Phytoremediation, especially phytoextraction, is a novel, cost-effective, and environmentally friendly approach that uses metal-accumulating plants to concentrate and remove metals from contaminated soils. Ethylenediaminetetraacetate (EDTA) was applied to metal-contaminated soil to increase the mobility and phytoavailability of metals in soil, thereby increasing the amount of toxic metals accumulated in the upper parts of phytoextracting plants. The objectives of this study were (1) to investigate the accumulation and spatial distribution of toxic metals (Cd, Cr, and Pb) in mulberry from MSW compost with the application of EDTA and (NH₄)₂SO₄, (2) to examine the effectiveness of EDTA and (NH₄)₂SO₄ applied together on toxic metals (Cd, Cr, and Pb) removal by mulberry under field conditions, and (3) to evaluate the potential of mulberry for phytoextraction of toxic metals from MSW compost. The tested plant—mulberry had been grown in MSW compost field for 4 years. EDTA solution at five rates (0, 50, 100, 50 mmol L^?1?+?1 g?L^?1 (NH₄)₂SO₄, and 100 mmol L^?1?+?1 g?L^?1 (NH₄)₂SO₄) was added into mulberry root medium in September 2009. Twenty days later, the plants were harvested and separated into six parts according to plant height. Cd, Cr, and Pb contents in plant samples and MSW compost were analyzed using an atomic absorption spectrophotometer. In the same treatment, Cd, Cr, and Pb concentrations in mulberry shoot were all higher than those in root, and Cd and Pb concentrations in shoot increased from lower to upper parts, reaching the highest in leaves. Significant increases were found in toxic metal concentration in different parts of mulberry with increasing EDTA concentration, especially when combined with (NH₄)₂SO₄. Mulberry exhibited high ability to accumulate Cd with bioconcentration factors (BCFs) higher than 1. EDTA application also significantly increased Cd BCFs. More than 30 % of metal uptake was concentrated in mulberry branches (stem of above 100 cm height) and leaves. Results presented here show that mulberry is a woody plant that has the potential of Cd phytoextraction from MSW compost by removing leaves and cutting branches. The application of EDTA combined with (NH₄)₂SO₄ significantly enhanced the efficiency of mulberry in removing Cd from the compost medium. Adding (NH₄)₂SO₄ into the compost will lower the risk of the exposure of environment to excessive non-biodegradable EDTA in a large-scale EDTA-assisted phytoextraction by reducing the dosage of EDTA. In China, the need for sod is increasing day by day. Sod is often produced on arable soil and sold together with soils. This would lead to the soil being infertile and the soil layer thin. After several times’ production, the soil can no longer be used for cultivating crops and be destroyed. In order to fully utilize MSW compost resources and save valuable soil resources, MSW compost can be used to replace arable soil to produce sod after extraction of toxic metals in it.     

3种含铁材料对重金属和砷复合污染底泥稳定化处理

选用3种含铁材料FeCl3、Fe(OH)3和FePO4,开展重金属和砷(As)复合污染底泥的稳定化处理实验,并用毒性浸出测试(TCLP)的结果和底泥交换态重金属(Pb、Cd、Cu、Zn)及As的含量来评价其稳定化效果。结果表明,(1)FeCl3和FePO4降低了底泥pH值,Fe(OH)3轻微地提高了底泥pH值。(2)FeCl3活化了底泥中Pb、Cd、Cu、Zn,使其浸出量和交换态含量增加,对As浸出量的影响不大,但使底泥中As交换态含量明显降低,且在最大添加量(8.00 g/kg)时As交换态含量未检测出;Fe(OH)3降低了Cd交换态和浸出量,稍增加了As交换态和浸出量,但对Pb、Cu、Zn交换态和浸出量影响不明显;FePO4明显降低了Pb的浸出量和交换态含量,略微降低了交换态Cd、Zn含量,对交换态Cu影响不大,但明显增加了As的浸出量和交换态含量。综上,FeCl3对As具有较好的稳定化效果,但明显活化了底泥中的4种重金属;Fe(OH)3亦对底泥中Cd有一定稳定化效果;FePO4对Pb的稳定化效果较好,但明显活化了底泥中的As。显然,3种含铁材料都不能实现底泥中重金属和As的同时稳定化。     

Reactivity between PbSO4 and CaCO3 particles relevant to the modification of mineral particles and chemical forms of Pb in particles sampled at two remote sites during an Asian dust event

During the transboundary transport of anthropogenic heavy metals by mineral particles providing reaction sites, the divalent metal salt PbSO₄ can be converted to PbCO₃ in the presence of water. We carried out laboratory experiments to study the transformation process under various conditions by incorporating test particles comprising CaCO₃ of a particulate mineral component, PbSO₄, and NaCl. After the immersion of PbSO₄ particles in contact with CaCO₃ particles in a water droplet, the conversion of PbSO₄ into PbCO₃ was confirmed by the change in morphology of the original particles to stick or needle form; the percentages of the chemical forms relative to the total Pb were determined by X-ray absorption near edge structure (XANES) analysis. Approximately 60–80% of PbSO₄ was converted to PbCO₃ after 24 h. A small amount of stick particles was detected when NaCl particles attached to PbSO₄/CaCO₃ particles were exposed to air with a relative humidity (RH) of 80–90% for 24 h. XANES measurements of the samples revealed that the molar percentage of PbCO₃ relative to the total Pb content was 4%.Field experiments were also conducted to determine the chemical forms of the Pb particles during the Kosa (Asian dust storm) event. Samples were collected from two remote sites in Japan and Korea. The mass size distribution of Pb aerosols collected in Japan was bimodal with two peaks in the coarse mode; the enrichment factor of Pb suggested that its source was anthropogenic. Pb L3 edge XANES measurements of both samples indicated that they had similar shapes. These measurements also indicated that the major Pb components for the samples collected in Japan were PbO, PbSO₄ PbCl₂, and PbCO₃, with molar percentages of 44%, 30%, 21%, and 5%, respectively. No significant differences were found between the component ratios of the samples collected in Japan and Korea, suggesting that definite transformation did not occur during the transport of the Kosa particles from Korea to Japan. On the basis of these observations, we postulate that the transformation process either occurred mainly before the particles arrived at Korea or did not take place after the particles left continental Asia.     

The three-year monitoring of 18 elements in five edible mushroom species collected from an old orchard

Abstract

The content of Al, As, Be, Cd, Ca, Cr, Co, Cu, Fe, Pb, Li, Mg, Mn, Ni, Rb, Se, Sr, and Zn in fruiting bodies of edible mushrooms Calocybe gambosa, Entoloma clypeatum, Entoloma saepium, Xerocomellus chrysenteron, and Amanita rubescens growing in an orchard planted with fruit trees and situated close to a high-grown forest was studied during years 2016–2018. A. rubescens showed the highest potential of the element accumulation with bioconcentration factors of 48.5, 16.2, 7.80, 6.53, 1.75, and 1.68 obtained for Rb, Cd, Cu, Zn, Sr, and Mg, respectively. Both Entoloma species accumulated the elements similarly with bioconcentration factors >1.0 obtained for Rb, Cu, Cd, and Mg. Bioconcentration factors <0.05 were obtained for Al, Cr, Fe, and Pb in all studied species. The contents of beryllium (<0.1?mg/kg dry matter) were always the lowest among the studied elements. The contents of some elements of studied mushroom species significantly fluctuated over the years. Despite the fact that some studied elements (As, Be, Cd, Pb, Ni) are considerably toxic for humans, the pronounced effect on health is not expected if the studied mushroom species are consumed occasionally and do not represent the main component of the diet.