Factors Influencing Regional Municipal Solid Waste Management Strategies

Abstract

Although regionalization policies have been proven as good strategies for municipal solid waste (MSW) management in previous studies, the optimal allocation of the waste stream is significantly affected by several influential factors, thus further investigation of the impacts of these factors on regional MSW management strategies is necessary. This study demonstrated the impacts of waste-to-electricity transformation coefficient (WETC) of incinerators and the fluctuation of unit tipping fees on the regional MSW flow/allocation of the Taipei metropolitan area from practical and economic perspectives. Real-world data and linear programming were used to obtain the least-cost alternatives under different scenarios. Analytical results indicated some treatment facilities had geographic superiority and their priorities changed when actual WETCs of incinerators were considered. Treatment facilities located at weighted centers were identified. The allocation of MSW among incinerators and landfills is affected by fluctuation of unit tipping fees within a certain range. Treatment facilities sensitive to the changes in unit tipping fees were also identified. Regression equations were also established that can estimate the cost items of MSW management scenarios with different unit tipping fees. The results of this study are very useful for daily basis regulation of MSW administration.     

Municipal Solid Waste Characteristics and Management in China

ABSTRACT

The purpose of this investigation is to evaluate the current status and identify the problems of municipal solid waste (MSW) management in China in order to determine appropriate remedial strategies. This is the first of two papers, discussing primarily the general characteristics of MSW and its management in China. The second paper focuses on specific remedial strategies. MSW generation in China has increased rapidly in the past 20 years from 31.3 million tons in 1980 to 113.0 million tons in 1998. The annual rate of increase is 3–10%. The average generation per capita is 1.0 kg/day (0.38 t/year). Nearly one-half of the waste generated is dumped in the suburbs, where the accumulated quantity has reached 6 billion tons, which has caused heavy environmental pollution. This paper provides information on MSW management in China, such as MSW generation and its physical, chemical, and biological properties. Low calorific value and high moisture content characterize China's municipal waste. Other issues related to MSW management in China are also discussed, including the factors that influence MSW generation quantity and quality, MSW collection, transfer and transport, treatment and disposal, material recovery, legislation, enforcement, and administration.     

Greenhouse Gas Mitigation-Induced Rough-Interval Programming for Municipal Solid Waste Management

Abstract

A greenhouse gas (GHG) mitigation-induced rough-interval programming model is proposed in this study. Components of GHG emission and environmental pollution control are incorporated into the objective function and a series of relevant constraints. To explicitly examine more complexities existing in many parameters, rough intervals are also communicated into the modeling framework. The proposed model presents satisfactory capabilities in analyzing complicated interrelationships among municipal solid waste (MSW) management, climate-change impact, and environmental pollution control. It can also provide optimal allocation schemes and facilitate decision-makers regulating environmentally sustainable strategies. The developed model is then applied to a case study for demonstrating its applicability. Two representative scenarios (relatively representing two potential management policies that may be implemented in the future years) are considered. The results indicate that the developed model presents advantages in mitigating GHG emissions and the associated climate-change impact. The comparison between the GHG mitigation-induced model with and without rough-interval parameters is also investigated. Completely different solutions of the two models imply the significant impact of dual-uncertain information on the system, which can hardly be addressed through the existing optimization approaches.     

Modeling Municipal Solid Waste Management System under Uncertainty

Abstract

In this study, a dynamic inexact waste management (DIWM) model is developed for identifying optimal waste-flow-allocation and facility-capacity-expansion strategies under uncertainty and is based on an inexact scenario-based probabilistic programming (ISPP) approach. The DIWM model can handle uncertainties presented as interval values and probability distributions, and it can support assessing the risk of violating system constraints. Several violation levels for facility-capacity and waste-diversion constraints are examined. Solutions associated with different risks of constraint violation were generated. The modeling results are valuable for supporting the planning of the study city’s municipal solid waste (MSW) management practices, the long-term capacity expansion for waste management system, and the identification of desired policies regarding waste diversion. Sensitivity analyses are also undertaken to demonstrate that the violations of different constraints have varied effects on the planning of waste-flow allocation, facility expansion, and waste management cost.     

江苏城市生活垃圾处理展望

通过国内外城市生活垃圾处理技术现状分析，提出江苏城市生活垃圾处理应走市场化道路。     

城市生活垃圾管理生命周期分析研究

概述了生命周期评价方法、内容及框架,并将其引入城市生活垃圾管理系统中,对城市生活垃圾管理进行了生命周期可行性分析,提出了开展城市生活垃圾生命周期管理的具体实施措施。     

Minimax Regret Analysis for Municipal Solid Waste Management: An Interval-Stochastic Programming Approach

Abstract

In this study, an interval minimax regret programming (IMMRP) method is developed for the planning of municipal solid waste (MSW) management under uncertainty. It improves on the existing interval programming and minimax regret analysis methods by allowing uncertainties presented as both intervals and random variables to be effectively communicated into the optimization process. The IMMRP can account for economic consequences under all possible scenarios without any assumption on their probabilities. The developed method is applied to a case study of long-term MSW management planning under uncertainty. Multiple scenarios associated with different cost and risk levels are analyzed. Reasonable solutions are generated, demonstrating complex tradeoffs among system cost, regret level, and system-failure risk. The method can also facilitate examination of the difference between the cost incurred with identified strategy and the least cost under an ideal condition. The results can help determine desired plans and policies for waste management under a variety of uncertainties.     

Polymers as Solid Waste in Municipal Landfills

Abstract

Synthetic polymers reach municipal landfills as components of products such as waste household paints, packaging films, storage containers, carpet fibers, and absorbent sanitary products. Some polymers in consumer products that reach landfills are designed to photodegrade or biodegrade. This article examines the significance of degradable polymers in management of solid waste in municipal landfills. Most landfills are not designed to photodegrade or biodegrade solid waste. Landfill disposal of stable polymers such as polyacrylics and polyethylenes is not associated with significant polymer degradation or mobility. Stability to photodegradation and biodegradation is an advantage when municipal landfills are used for disposal of polymer products as solid waste. Use of landfill disposal can be a responsible means to manage polymer waste and can be part of an overall waste management plan which includes source reduction, recycling, reuse, composting, and waste-to-energy incineration.     

An Optimal Model and Its Application for the Management of Municipal Solid Waste from Regional Small Cities in China

Abstract

Based on the basic characteristics of municipal solid waste (MSW) from regional small cities in China, some optimal management principles have been put forward: regional optimization, long-term optimization, and integrated treatment/disposal optimization. According to these principles, an optimal MSW management model for regional small cities is developed and provides a useful method to manage MSW from regional small cities. A case study application of the optimal model is described and shows that the optimal management scenarios in the controlling region can be gained, adequately validating and accounting for the advantages of the optimal model.     

Greenhouse Gas Dynamics of Municipal Solid Waste Alternatives

ABSTRACT

Previous greenhouse gas studies comparing landfilling with combustion of municipal solid waste (MSW) are limited to examinations of the emissions weighted by their relative radiative activity. This paper adds another dimension by analyzing the atmospheric response to these emissions. The heart of the analysis is a time-dependent model using a perturbation analysis of the IS92a results of the Intergovernmental Panel on Climate Change (IPCC). Using as inputs the emissions from the two technologies, the model calculates atmospheric concentration histories. Scenarios for a landfill and a combustor envision each accepting 1000 Mg refuse/day for a 30-year operating period followed by a 70-year postclosure period. The baseline scenario examines the basic greenhouse impact of each technology. The other scenario adds active gas collection at the landfill and energy offset credits for avoided power plant carbon emissions. For both scenarios, CH₄ and trace gases from the landfill persist in the atmosphere, and they are relatively potent at forcing IR heating. The combination of these features place the landfill much higher than previously expected on the greenhouse impact scale. For the baseline scenario, the time-integrated radiative forcing from landfilling is 115 times that of combustion, and this ratio is 45 for the second scenario.     

Computer Simulation of a Municipal Solid Waste Combustor

A mathematical model has been developed to study the thermal and chemical processes occurring In a municipal solid waste mass combustor. Treating the solids feed as a mixture of pseudo-components, the model determines the Interrelationships between the solids feed rate, grate travel rate and length, amounts and distributions of primary and secondary air, extent of solids burn out, and the bed and flame temperatures. The model Incorporates the kinetics of pyrolysis of solids and simulates heat and mass transfer within the bed.

The temperature and mass flow profiles generated show that much of the grate Is taken up by the heatup and burnout zones. The heatup zone can be reduced by distributing the primary air to maintain minimal air flow In that region, thereby permitting rapid heatup. Increasing the solids feed rate and adjusting the air flow distributions can reduce the length of the burnout zone. The computer program, available on both PCs and mainframe, can be used for different MSW Incinerator dimensions and feed parameters to Investigate the effects of the control variables and optimize the desired output characteristics, e.g., maximize solids throughput.     

Evaluation of Solid Waste Management Strategies in the Taipei Metropolitan Area of Taiwan

Abstract

Chenfang Lin is with the Department of Soil and Environmental Science at National Chung Hsing University.Municipal solid waste (MSW) management is a major concern for highly urbanized societies. Among proposed MSW management systems, regionalization programs generally have received considerable attention. This study analyzes real-world operational data to assess different MSW management policies, especially regionalization strategies, and their impact on MSW management systems in the Taipei metropolitan area. Linear programming is also used to identify the minimum costs sustained by each policy. The linear programming results show that regionalization programs are more economical and also improve incinerator operation efficiency. Sensitivity analysis indicates that the minimum treatment requirement of incinerators is a very sensitive influence on the MSW flows distributed through the entire region. The MSW of several “sensitive” administrative districts will be allocated to different treatment facilities according to different management strategies. A list of preferential sequences of MSW treatment and disposal facilities can also be identified by the model presented in this study. The results of this study may provide a useful tool for aiding decision-making related to real-world MSW management problems.     

Partitioning Gas Tracer Tests for Measurement of Water in Municipal Solid Waste

Abstract

A key component in the operation of almost all bioreactor landfills is the addition of water to maintain optimal moisture conditions. To determine how much water is needed and where to add it, in situ methods are required to measure water within solid waste. Existing technologies often result in measurements of unknown accuracy, because of the variability of solid waste materials and time-dependent changes in packing density, both of which influence most measurement methods. To overcome these problems, a new technology recently developed by hydrologists for measuring water in the vadose zone—the partitioning gas tracer test—was tested. In this technology, the transport behavior of two gas tracers within solid waste is used to measure the fraction of the void space filled with water. One tracer is conservative and does not react with solids or liquids, while a second tracer partitions into the water and is separated from the conservative tracer during transport. This technology was tested in four different solid waste packings and was capable of determining the volumetric water content to within 48% of actual values, with most measurement errors less than 15%. This technology and the factors that affect its applicability to landfills are discussed in this paper.     

Leaching Dynamics Studies of Municipal Solid Waste Incinerator Ash

Abstract

An assessment of the short- and long-term hazards from municipal solid waste incinerator (MSWI) ash is made through the elemental analysis of 40 to 50 elements in the ash and leachates produced by several leaching procedures. The ash was analyzed using neutron activation analysis (NAA) and x-ray fluorescence (XRF). The leachates were analyzed using NAA and inductively-coupled plasma atomic emission spectroscopy (ICP). The leaching dynamics of an ash monofill were modelled with a series of extractions using simulated acid rain. An initial spike of the metals Ag, Ba, Be, Cr, Cu, Mo, Pb, Sr, and Zn in the leachates appears to be the greatest hazard posed by MSWI ash monofills. The elements As, Cd, Cu, Hg, Pb, S, and Zn were identified as potential long term hazards utilizing a sequential extraction procedure which approximates the total amount of the elements available over the lifetime of the monofill.

The pH of the resulting leachate is the single greatest factor governing the concentration of metals in solution, more important than the concentration of the element in the ash. These results are applied to an assessment of the suitability of the Toxicity Characteristic Leaching Procedure (TCLP) in measuring leaching potential of an MSWI ash monofill.     

A Life-Cycle Inventory Model of Municipal Solid Waste Combustion

ABSTRACT

Evaluation of alternate strategies for municipal solid waste (MSW) management requires models to calculate environmental emissions as a function of both waste quantity and composition. A methodology to calculate waste component-specific emissions associated with MSW combustion is presented here. The methodology considers emissions at a combustion facility as well as those avoided at an electrical energy facility because of energy recovered from waste combustion. Emission factors, in units of kg pollutant per metric ton MSW entering the combustion facility, are calculated for CO₂-biomass, CO₂-fossil, SO_x , HCl, NO_x , dioxins/furans, PM, CO, and 11 metals. Water emissions associated with electrical energy offsets are also considered. Reductions in environmental emissions for a 500-metric-ton-per-day combustion facility that recovers energy are calculated.     

Comparison of Aerobic and Anaerobic Biotreatment of Municipal Solid Waste

Abstract

To increase the operating lifetime of landfills and to lower leachate treatment costs, an increasing number of municipal solid waste (MSW) landfills are being managed as either aerobic or anaerobic bioreactors. Landfill gas composition, respiration rates, and subsidence were measured for 400 days in 200-L tanks filled with fresh waste materials to compare the relative effectiveness of the two treatments. Tanks were prepared to provide the following conditions: (1) air injection and leachate recirculation (aerobic), (2) leachate recirculation (anaerobic), and (3) no treatment (anaerobic). Respiration tests on the aerobic wet tank showed a steady decrease in oxygen consumption rates from 1.3 mol/day at 20 days to 0.1 mol/day at 400 days. Aerobic wet tanks produced, on average, 6 mol of carbon dioxide (CO₂)/kg of MSW as compared with anaerobic wet tanks, which produced 2.2 mol methane/kg of MSW and 2.0 mol CO₂/kg methane. Over the test period, the aerobic tanks settled on average 35%, anaerobic tanks settled 21.7%, and the no-treatment tank settled 7.5%, equivalent to overall mass loss in the corresponding reactors. Aerobic tanks reduced stabilization time and produced negligible odor compared with anaerobic tanks, possibly because of the 2 orders of magnitude lower leachate ammonia levels in the aerobic tank. Both treatment regimes provide the opportunity for disposal and remediation of liquid waste.     

Control of Mercury Emissions from a Municipal Solid Waste Incinerator in Japan

Abstract

The control of Hg emissions from a municipal solid waste incinerator (MSWI) is very important, because more than 78% of municipal solid waste (MSW) is incinerated. The Hg content of coal used in utility boilers is relatively low in Japan. In this study, recent trends in the Hg content of MSW in Japan and activated carbon (AC) injection as a control technology of Hg emission from an MSWI are discussed. The effect of AC injection on Hg removal from flue gas in an MSWI was investigated by pilot-scale experiments using a bag filter (BF). The injection of AC increases the Hg reduction ratio by 20–30% compared with cases without AC injection. The Hg reduction ratio increases as the flue gas temperature decreases. The Hg reduction ratio is closely related to the inlet Hg concentration and was expressed with a Langmuir-type adsorption isotherm.     

A Sampling Protocol for Composting,Recycling, and Re-use of Municipal Solid Waste

Abstract

This article reports on development of a protocol for characterizing municipal solid waste (MSW). This protocol is similar to that recommended by the American Society for Testing and Materials but includes a distinction between pure and mixed loads of MSW. Thirteen component categories were used with a focus on material feed stock for composting, recycling, and reuse. The required number of samples was determined to achieve a 80%, 90%, and 95% statistical accuracy for characterizing MSW categories at 1% and 2% sampling error. This study found that a maximum of 25 randomly collected samples of 200 pounds will reflect each component category of mixed load MSW with at least a 95% confidence level and 2% error. This protocol was successfully tested in Monongalia County, West Virginia, to provide a “snapshot” MSW characterization during early summer.