Chemical mass balance model with fractionation for apportioning PM2.5: a test case for Los Angeles traffic sources

Chemical mass balance receptor models (CMBs) use measured pollutant concentrations, along with source information, to apportion the contributions of primary sources to the measured concentrations. CMBs can be used to evaluate the accuracy of the emission inventories that underlie State Implementation Plan (SIP) modeling, by providing an allocation of emissions to individual source categories. CMBs, however, traditionally have not accounted for the chemical reaction and differential deposition or fractionation that occur between the source and receptor. This means that they have historically had severe limitations in apportioning secondary particulate matter (PM), which is an especially important component of fine PM (PM2.5). Stafford and Liljestrand developed a method to account for fractionation in CMBs using depletion factors based on a solution of the steady-state advection-dispersion equation, including gravitational settling, dry deposition, and first-order chemical reaction.     

Evaluations of the chemical mass balance method for determining contributions of gasoline and diesel exhaust to ambient carbonaceous aerosols

The US. Department of Energy Gasoline/Diesel PM Split Study was conducted to assess the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the relative contributions of emissions from gasoline (or spark ignition [SI]) and diesel (or compression ignition [CI]) engines to ambient concentrations of fine particulate matter (PM2.5) in California's South Coast Air Basin (SOCAB). In this study, several groups worked cooperatively on source and ambient sample collection and quality assurance aspects of the study but worked independently to perform chemical analysis and source apportionment. Ambient sampling included daily 24-hr PM2.5 samples at two air quality-monitoring stations, several regional urban locations, and along freeway routes and surface streets with varying proportions of automobile and truck traffic. Diesel exhaust was the dominant source of total carbon (TC) and elemental carbon (EC) at the Azusa and downtown Los Angeles, CA, monitoring sites, but samples from the central part of the air basin showed nearly equal apportionments of CI and SI. CI apportionments to TC were mainly dependent on EC, which was sensitive to the analytical method used. Weekday contributions of CI exhaust were higher for Interagency Monitoring of Protected Visual Environments (IMPROVE; 41+/-3.7%) than Speciation Trends Network (32+/-2.4%). EC had little effect on SI apportionment. SI apportionments were most sensitive to higher molecular weight polycyclic aromatic hydrocarbons (indeno[123-cd]pyrene, benzo(ghi)perylene, and coronene) and several steranes and hopanes, which were associated mainly with high emitters. Apportionments were also sensitive to choice of source profiles. CI contributions varied from 30% to 60% of TC when using individual source profiles rather than the composites used in the final apportionments. The apportionment of SI vehicles varied from 1% to 12% of TC depending on the specific profile that was used. Up to 70% of organic carbon (OC) in the ambient samples collected at the two fixed monitoring sites could not be apportioned to directly emitted PM emissions.     

Size distribution and diurnal characteristics of particle-bound metals in source and receptor sites of the Los Angeles Basin

Measurement of daily size-fractionated ambient PM₁₀ mass, metals, inorganic ions (nitrate and sulfate) and elemental and organic carbon were conducted at source (Downey) and receptor (Riverside) sites within the Los Angeles Basin. In addition to 24-h concentration measurements, the diurnal patterns of the trace element and metal content of fine (0–2.5 μm) and coarse (2.5–10 μm) PM were studied by determining coarse and fine PM metal concentrations during four time intervals of the day.The main source of crustal metals (e.g., Al, Si, K, Ca, Fe and Ti) can be attributed to the re-suspension of dust at both source and receptor sites. All the crustals are predominantly present in supermicron particles. At Downey, potentially toxic metals (e.g., Pb, Sn, Ni, Cr, V, and Ba) are predominantly partitioned (70–85%, by mass) in the submicron particles. Pb, Sn and Ba have been traced to vehicular emissions from nearby freeways, whereas Ni and Cr have been attributed to emissions from powerplants and oil refineries upwind in Long Beach. Riverside, adjacent to Southern California deserts, exhibits coarser distributions for almost all particle-bound metals as compared to Downey. Fine PM metal concentrations in Riverside seem to be a combination of few local emissions and those transported from urban Los Angeles. The majority of metals associated with fine particles are in much lower concentrations at Riverside compared to Downey. Diurnal patterns of metals are different in coarse and fine PM modes in each location. Coarse PM metal concentration trends are governed by variations in the wind speeds in each location, whereas the diurnal trends in the fine PM metal concentrations are found to be a function both of the prevailing meteorological conditions and their upwind sources.     

Air pollution and hospital admissions for diseases of the circulatory system in three U.S. metropolitan areas

Generalized additive models were used to analyze the time series of daily hospital admissions for cardiovascular and cerebrovascular diseases over the period of 1987-1995 in three major metropolitan areas--Cook County, IL; Los Angeles County, CA; and Maricopa County, AZ--in the United States. In Cook and Maricopa Counties, admissions information was only available for the elderly (ages 65 and over), while in Los Angeles County, admissions information was available for all ages. In Cook County, daily monitoring information was available on PM10, CO, SO2, NO2, and O3. In Los Angeles and Maricopa Counties, monitoring information was available daily on the gases, and information on PM10 was available every sixth day. In Los Angeles County, information on PM2.5 was also available every sixth day. In Cook and Los Angeles Counties, associations were found between each pollutant, with the exception of O3, and admissions for cardiovascular disease, with the gases showing the strongest associations. In two-pollutant models with PM and one of the gases, the effect of the gases remained stable, while the effect of PM became unstable and insignificant. In Maricopa County, the gases, with the exception of O3, were weakly associated with hospital admissions for cardiovascular disease, while PM was not. In two-pollutant models with two of CO, SO2, and NO2, the pattern of results is heterogeneous in the three counties. In all three counties, only weak evidence of any association between air pollution and cerebrovascular admissions was found.     

Air Pollution and Hospital Admissions for Diseases of the Circulatory System in Three U.S. Metropolitan Areas

ABSTRACT

Generalized additive models were used to analyze the time series of daily hospital admissions for cardiovascular and cerebrovascular diseases over the period of 19871995 in three major metropolitan areas—Cook County, IL; Los Angeles County, CA; and Maricopa County, AZ— in the United States. In Cook and Maricopa Counties, admissions information was only available for the elderly (ages 65 and over), while in Los Angeles County, admissions information was available for all ages. In Cook County, daily monitoring information was available on PM₁₀, CO, SO₂, NO₂, and O₃. In Los Angeles and Maricopa Counties, monitoring information was available daily on the gases, and information on PM₁₀ was available every sixth day. In Los Angeles County, information on PM₂₅ was also available every sixth day. In Cook and Los Angeles Counties, associations were found between each pollutant, with the exception of O₃, and admissions for cardiovascular disease, with the gases showing the strongest associations. In two-pollutant models with PM and one of the gases, the effect of the gases remained stable, while the effect of PM became unstable and insignificant. In Maricopa County, the gases, with the exception of O₃, were weakly associated with hospital admissions for cardiovascular disease, while PM was not. In two-pollutant models with two of CO, SO₂, and NO₂, the pattern of results is heterogeneous in the three counties. In all three counties, only weak evidence of any association between air pollution and cere-brovascular admissions was found.     

Application of Infrared Spectroscopy to Exhaust Gas Analysis

Abstract

The Mohave Valley region of southern Nevada/southwestern Arizona has experienced elevated particulate concentrations and is classified as a PM₁₀ nonattainment area. Anthropogenic aerosol sources in the area include the Mohave Power Project (MPP), a 1,580-MW coal-fired power plant; motor vehicles; construction activities; and paved and unpaved road dust and disturbed desert soil. Aerosols may also be transported long distances from other areas, such as the Los Angeles Basin. Based on the infrequency of plume contact at sites in the valley (as determined by SO₂ measurements), it was believed that the contribution of the MPP to primary PM₁₀ was minimal and that fugitive dust was the primary source of ambient particulate matter.

To evaluate the magnitude of source contributors, PM₁₀ measurements were made using a medium-volume sampler along with ancillary meteorological and air quality measurements in the Mohave Valley at Bullhead City, Arizona, for a period of longer than one year (September 1988 through mid-October 1989). The aerosol filter samples were analyzed for mass, elements, ions, and carbon. Source apportionment using the Chemical Mass Balance (CMB) receptor model was performed. On average, geological dust was the major contributor to PM10 (79.5%), followed by primary motor vehicle sources (16.7%), secondary ammonium sulfate (3.5%), secondary ammonium nitrate (0.1%), and primary coal-fired power plant emissions (0.1%).     

Source apportionment of fine particulate matter (PM2.5) at a rural Ohio River Valley site

Twenty four-hour averaged concentrations of fine particulate matter were collected at Athens, OH between March 2004 and November 2005 in an effort to characterize the nature of PM_2.5 and apportion its sources. PM_2.5 samples were chemically analyzed and positive matrix factorization was applied to this speciation data to identify the probable sources. PMF arrived at a 7-factor model to most accurately apportion sources of the PM_2.5 observed at Athens. Conditional probability function (CPF) and potential source contribution function (PSCF) were applied to the identified sources to investigate the geographical location of these sources. Secondary sulfate source dominated the contributions with a total contribution of 62.6% with the primary and secondary organic source following second with 19.9%. Secondary nitrate contributed a total of 6.5% with the steel production source and Pb- and Zn-source coming in at 3.1% and 2.9%, respectively. Crustal and mobile sources were small contributors (2.5% each) of PM_2.5 to the Athens region. The secondary sulfate, secondary organic and nitrate portrayed a clear seasonal nature with the sulfate and secondary organic peaking in the warm months and the nitrate reaching a high in the cold months. The high percentage of secondary sulfate observed at a rural site like Athens suggests the involvement of regional transport mechanisms.     

Secondary particulate matter in the United States: insights from the Particulate Matter Supersites Program and related studies

Secondary aerosols comprise a major fraction of fine particulate matter (PM2.5) in all parts of the country, during all seasons, and times of day. The most abundant secondary species include sulfate, nitrate, ammonium, and secondary organic aerosols (SOAs). The relative abundance of each species varies in space and time as a function of meteorology, source emissions strength and type, thermodynamics, and atmospheric processing. Transport of secondary aerosols from upwind locations can contribute significantly at downwind receptor sites, especially regionally in the eastern United States, and across a given urbanized area, such as in Los Angeles. Processes governing the formation of the inorganic secondary species (sulfate, nitrate, and ammonium) are fairly well understood, although the occurrence of nucleation bursts initiated with the formation of ultrafine sulfuric acid particles observed regionally on clean days in the eastern United States was unexpected. Because of the complex nature of organic material in air, much is still to be learned about the sources, formation, and even spatial and temporal distributions of SOAs. For example, a considerable fraction of ambient organic PM is oxidized organic species, many of which still need to be identified, quantified, and their sources and formation mechanisms determined. Furthermore, significant uncertainty (approaching 50% or more) is associated with estimating the SOA fraction of organic material in air with current methods. This review summarizes the findings of the Supersites Program and related studies addressing secondary particulate matter (PM), including spatial and temporal variations of secondary PM and its precursor species, data and methods for determining the primary and secondary fractions of PM mass, and findings on the anthropogenic and natural fractions of secondary PM.     

Receptor modeling application framework for particle source apportionment

Receptor models infer contributions from particulate matter (PM) source types using multivariate measurements of particle chemical and physical properties. Receptor models complement source models that estimate concentrations from emissions inventories and transport meteorology. Enrichment factor, chemical mass balance, multiple linear regression, eigenvector. edge detection, neural network, aerosol evolution, and aerosol equilibrium models have all been used to solve particulate air quality problems, and more than 500 citations of their theory and application document these uses. While elements, ions, and carbons were often used to apportion TSP, PM10, and PM2.5 among many source types, many of these components have been reduced in source emissions such that more complex measurements of carbon fractions, specific organic compounds, single particle characteristics, and isotopic abundances now need to be measured in source and receptor samples. Compliance monitoring networks are not usually designed to obtain data for the observables, locations, and time periods that allow receptor models to be applied. Measurements from existing networks can be used to form conceptual models that allow the needed monitoring network to be optimized. The framework for using receptor models to solve air quality problems consists of: (1) formulating a conceptual model; (2) identifying potential sources; (3) characterizing source emissions; (4) obtaining and analyzing ambient PM samples for major components and source markers; (5) confirming source types with multivariate receptor models; (6) quantifying source contributions with the chemical mass balance; (7) estimating profile changes and the limiting precursor gases for secondary aerosols; and (8) reconciling receptor modeling results with source models, emissions inventories, and receptor data analyses.     

Historical trends in the mass and chemical species concentrations of coarse particulate matter in the Los Angeles Basin and relation to sources and air quality regulations

To assess the impact of past, current and proposed air quality regulations on coarse particulate matter (CPM), the concentrations of CPM mass and its chemical constituents were examined in the Los Angeles Basin from 1986 to 2009 using PM data acquired from peer-reviewed journals and regulatory agency database. PM10 mass levels decreased by approximately half from 1988 to 2009 at the three sampling sites examined- located in downtown Los Angeles, Long Beach and Riverside. Annual CPM mass concentrations were calculated from the difference between daily PM10 and PM2.5 from 1999 to 2009. High CPM episodes driven by high wind speed/stagnant condition caused year-to-year fluctuations in the 99th/98th percentile CPM levels. The reductions of average CPM levels were lower than those of PM10 in the same period, therefore the decrease of PM10 level was mainly driven by reductions in the emission levels of PM2.5 (or fine) particles, as demonstrated by the higher annual reduction of average PM2.5 (0.92 microg/m3) compared with CPM (0.39 microg/m3) from 1999 to 2009 in downtown Los Angeles despite their comparable concentrations. This is further confirmed by the significant decrease of Ni, Cr, V and EC in the coarse fraction after 1995. On the other hand, the levels of several inorganic ions (sulfate, chloride and to a lesser extent nitrate) remained comparable. From 1995 to 2008, levels of Cu, a tracer of brake wear, either remained similar or decreased at a smaller rate compared with elements of combustion origins. This differential reduction of CPM components suggests that past and current regulations may have been more effective in reducing fugitive dust (Al, Fe and Si) and combustion emissions (Ni, Cr, V, and EC) rather than CPM from vehicular abrasion (Cu) and inorganic ions (NO3(-), SO4(2-) and Cl(-)) in urban areas. Implications: Limited information is currently available to provide the scientific basis for understanding the sources and physical and chemical variations of CPM, and their relations to air quality regulations and adverse health effects. This study investigates the historical trends of CPM mass and its chemical components in the Los Angeles Basin to advance our understanding on the impact of past and current air quality regulations on the coarse fraction of PM. The results of this study will aid policy makers to design more targeted regulations to control CPM sources to ensure substantial protection of public health from CPM exposure. Supplemental Materials: Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for (1) details of the sampling sites and (2) the daily concentrations of high CPM/PM10 episodes.     

A composite receptor and dispersion model approach for estimation of effective emission factors for vehicles

It is difficult to estimate vehicular emission factors at traffic junctions for use in dispersion modelling studies. Firstly, because the vehicles are in various modes of operation and secondly, it is difficult to delineate the effects of other contributing sources, mainly the effects of road dust and deposited constituents, which are very prominent at traffic junctions in India. Factor analysis-multiple regression (FA-MR), a receptor modelling technique has been used in this study for apportioning the contributing sources. The measurement data consist of one year's temporal variation of suspended particulate matter (SPM), analysed for its trace metal constituents, and two gaseous components NO₂ and SO₂ at two traffic junctions in Mumbai (India). FA-MR apportioned 40% of the observed SPM to road dust and 15% to vehicular sources. Of the total Pb observed in the SPM, FA-MR apportioned 60% to vehicular sources and 20% to road dust. The field-observed vehicular counts, meteorological parameters and road geometry were used in California line source dispersion model to estimate the effective vehicular emission factor for Pb at one traffic junction. This derived emission factor was used to predict the Pb concentration at second (independent observation) traffic junction. The result was found to be more satisfactory than using default emission factors obtained from literature. Similarly, effective vehicular emission factor for NO₂ was also evaluated for one site and tested for predicting concentrations at the other site.     

Sensitivity analysis and evaluation of MicroFacPM: a microscale motor vehicle emission factor model for particulate matter emissions

A microscale emission factor model (MicroFacPM) for predicting real-time site-specific motor vehicle particulate matter emissions was presented in the companion paper titled "Development of a Microscale Emission Factor Model for Particulate Matter (MicroFacPM) for Predicting Real-Time Motor Vehicle Emissions". The emission rates discussed are in mass per unit distance with the model providing estimates of fine particulate matter (PM2.5) and coarse particulate matter. This paper complements the companion paper by presenting a sensitivity analysis of the model to input variables and evaluation model outputs using data from limited field studies. The sensitivity analysis has shown that MicroFacPM emission estimates are very sensitive to vehicle fleet composition, speed, and the percentage of high-emitting vehicles. The vehicle fleet composition can affect fleet emission rates from 8 mg/mi to 1215 mg/mi; an increase of 5% in the smoking (high-emitting) current average U.S. light-duty vehicle fleet (compared with 0%) increased PM2.5 emission rates by -272% for 2000; and for the current U.S. fleet, PM2.5 emission rates are reduced by a factor of -0.64 for speeds >50 miles per hour (mph) relative to a speed of 10 mph. MicroFacPM can also be applied to examine the contribution of emission rates per vehicle class, model year, and sources of PM. The model evaluation is presented for the Tuscarora Mountain Tunnel, Pennsylvania Turnpike, PA, and some limited evaluations at two locations: Sepulveda Tunnel, Los Angeles, CA, and Van Nuys Tunnel, Van Nuys, CA. In general, the performance of MicroFacPM has shown very encouraging results.     

Source apportionment of airborne particulate matter using organic compounds as tracers

A chemical mass balance receptor model based on organic compounds has been developed that relates source contributions to airborne fine particle mass concentrations. Source contributions to the concentrations of specific organic compounds are revealed as well. The model is applied to four air quality monitoring sites in southern California using atmospheric organic compound concentration data and source test data collected specifically for the purpose of testing this model. The contributions of up to nine primary particle source types can be separately identified in ambient samples based on this method, and approximately 85% of the organic fine aerosol is assigned to primary sources on an annual average basis. The model provides information on source contributions to fine mass concentrations, fine organic aerosol concentrations and individual organic compound concentrations. The largest primary source contributors to fine particle mass concentrations in Los Angeles are found to include diesel engine exhaust, paved road dust, gasoline-powered vehicle exhaust, plus emissions from food cooking and wood smoke, with smaller contribution from tire dust, plant fragments, natural gas combustion aerosol, and cigarette smoke. Once these primary aerosol source contributions are added to the secondary sulfates, nitrates and organics present, virtually all of the annual average fine particle mass at Los Angeles area monitoring sites can be assigned to its source.     

Defining the photochemical contribution to particulate matter in urban areas using time-series analysis

The objective of this project is to demonstrate how the ambient air measurement record can be used to define the relationship between O3 (as a surrogate for photochemistry) and secondary particulate matter (PM) in urban air. The approach used is to develop a time-series transfer-function model describing the daily PM10 (PM with less than 10 microm aerodynamic diameter) concentration as a function of lagged PM and current and lagged O3, NO or NO2, CO, and SO2. Approximately 3 years of daily average PM10, daily maximum 8-hr average O3 and CO, daily 24-hr average SO2 and NO2, and daily 6:00 a.m.-9:00 a.m. average NO from the Aerometric Information Retrieval System (AIRS) air quality subsystem are used for this analysis. Urban areas modeled are Chicago, IL; Los Angeles, CA; Phoenix, AZ; Philadelphia, PA; Sacramento, CA; and Detroit, MI. Time-series analysis identified significant autocorrelation in the O3, PM10, NO, NO2, CO, and SO2 series. Cross correlations between PM10 (dependent variable) and gaseous pollutants (independent variables) show that all of the gases are significantly correlated with PM10 and that O3 is also significantly correlated lagged up to two previous days. Once a transfer-function model of current PM10 is defined for an urban location, the effect of an O3-control strategy on PM concentrations is estimated by calculating daily PM10 concentrations with reduced O3 concentrations. Forecasted summertime PM10 reductions resulting from a 5 percent decrease in ambient O3 range from 1.2 microg/m3 (3.03%) in Chicago to 3.9 microg/m3 (7.65%) in Phoenix.     

Future year ozone source attribution modeling studies for the eastern and western United States

Three modeling approaches, the U.S. Environmental Protection Agency’s (EPA) Community Multiscale Air Quality (CMAQ) zero-out, the Comprehensive Air quality Model with extensions (CAMx) zero-out, and the CAMx probing tools ozone source apportionment tool (OSAT), were used to project the contributions of various source categories to future year design values for summer 8-hr average ozone concentrations at selected U.S. monitors. The CMAQ and CAMx zero-out or brute-force approaches predicted generally similar contributions for most of the source categories, with some small differences. One of the important findings from this study was that both the CMAQ and CAMx zero-out approaches tended to apportion a larger contribution to the “other” category than the OSAT approach. For the OSAT approach, this category is the difference between the total emissions and the sum of the tracked emissions and consists of non-U.S. emissions. For the zero-out approach, it also includes the effects of nonlinearities in the system because the sum of the sensitivities of all sources is not necessarily equal to the sum of their contributions in a nonperturbed environment. The study illustrates the strengths and weaknesses of source apportionment approaches, such as OSAT, and source sensitivity approaches, such as zero-out. The OSAT approach is suitable for studying source contributions, whereas the zero-out approach is suitable for studying response to emission changes. Future year design values of summer 8-hr average ozone concentrations were projected to decrease at all the selected monitors for all the simulations in each city, except at the downtown Los Angeles monitor. Both the CMAQ and CAMx results showed all modeled locations project attainment in 2018 and 2030 to the current National Ambient Air Quality Standards (NAAQS) level of 75 ppb, except the selected Los Angeles monitor in 2018 and the selected San Bernardino monitor in 2018 and 2030.

Implications:This study illustrates the strengths and weaknesses of three modeling approaches, CMAQ zero-out, CAMx zero-out, and OSAT to project contributions of various source categories to future year design values for summer 8-hr average ozone concentrations at selected U.S. monitors. The OSAT approach is suitable for studying source contributions, whereas the zero-out approach is suitable for studying response to emission changes. Future year design values of summer 8-hr average ozone concentrations were projected to decrease, except at the downtown Los Angeles monitor. Comparing projections with the current NAAQS (75 ppb) show attainment everywhere, except two locations in 2018 and one location in 2030.     

Emission factors for high-emitting vehicles based on on-road measurements of individual vehicle exhaust with a mobile measurement platform

Fuel-based emission factors for 143 light-duty gasoline vehicles (LDGVs) and 93 heavy-duty diesel trucks (HDDTs) were measured in Wilmington, CA using a zero-emission mobile measurement platform (MMP). The frequency distributions of emission factors of carbon monoxide (CO), nitrogen oxides (NO(x)), and particle mass with aerodynamic diameter below 2.5 microm (PM2.5) varied widely, whereas the average of the individual vehicle emission factors were comparable to those reported in previous tunnel and remote sensing studies as well as the predictions by Emission Factors (EMFAC) 2007 mobile source emission model for Los Angeles County. Variation in emissions due to different driving modes (idle, low- and high-speed acceleration, low- and high-speed cruise) was found to be relatively small in comparison to intervehicle variability and did not appear to interfere with the identification of high emitters, defined as the vehicles whose emissions were more than 5 times the fleet-average values. Using this definition, approximately 5% of the LDGVs and HDDTs measured were high emitters. Among the 143 LDGVs, the average emission factors of NO(x), black carbon (BC), PM2.5, and ultrafine particle (UFP) would be reduced by 34%, 39%, 44%, and 31%, respectively, by removing the highest 5% of emitting vehicles, whereas CO emission factor would be reduced by 50%. The emission distributions of the 93 HDDTs measured were even more skewed: approximately half of the NO(x) and CO fleet-average emission factors and more than 60% of PM2.5, UFP, and BC fleet-average emission factors would be reduced by eliminating the highest-emitting 5% HDDTs. Furthermore, high emissions of BC, PM2.5, and NO(x) tended to cluster among the same vehicles.     

An alternative way to determine the size distribution of airborne particulate matter

We developed and tested a methodology to extract both the size-segregated source apportionment of atmospheric aerosol and the size distribution of each detected element. The experiment is based on the parallel use of a standard low-volume sampler to collect Particulate Matter (PM) and an Optical Particle Counter (OPC). The approach is complementary to size-segregated PM sampling, and it was tested versus a 12-stage cascade impactor. Samples were collected inside the urban area of Genoa (Italy) and their elemental composition was measured by Energy Dispersive-X Ray Fluorescence (ED-XRF). Positive Matrix Factorization (PMF) was applied to time series of elemental concentrations to identify major PM sources, and both PM mass concentration and size-segregated particle number concentration were apportioned. Source profiles and temporal trends extracted by PMF were analyzed together with the OPC data to obtain the size distribution for several elements. The new methodology proved to be reliable for the PM apportionment as well as in providing the elemental concentrations in PM10, PM2.5, and PM1 (PM with aerodynamic diameter, D_ae < 10, 2.5, and 1 μm, respectively). The elemental size distributions are in good agreement with those obtained by the cascade impactor for several elements but some discrepancies, in particular for traffic emissions, are stressed and discussed in the text. The new methodology has two main advantages: it only requires standard semi-automatic sampling equipment and compositional analysis and it provides size-segregated information averaged over quite long periods (typically several months). This is particularly important since campaigns with cascade impactors are generally laborious and thus limited to short periods.     

Nitrogen deposition in California forests: a review

Atmospheric concentrations and deposition of the major nitrogenous (N) compounds and their biological effects in California forests are reviewed. Climatic characteristics of California are summarized in light of their effects on pollutant accumulation and transport. Over large areas of the state dry deposition is of greater magnitude than wet deposition due to the arid climate. However, fog deposition can also be significant in areas where seasonal fogs and N pollution sources coincide. The dominance of dry deposition is magnified in airsheds with frequent temperature inversions such as occur in the Los Angeles Air Basin. Most of the deposition in such areas occurs in summer as a result of surface deposition of nitric acid vapor (HNO3) as well as particulate nitrate (NO3-) and ammonium (NH4+). Internal uptake of gaseous N pollutants such as nitrogen dioxide (NO2), nitric oxide (NO), HNO3, peroxyacetyl nitrate (PAN), ammonia (NH3), and others provides additional N to forests. However, summer drought and subsequent lower stomatal conductance of plants tend to limit plant utilization of gaseous N. Nitrogen deposition is much greater than S deposition in California. In locations close to photochemical smog source areas, concentrations of oxidized forms of N (NO2, HNO3, PAN) dominate, while in areas near agricultural activities the importance of reduced N forms (NH3, NH4+) significantly increases. Little data from California forests are available for most of the gaseous N pollutants. Total inorganic N deposition in the most highly-exposed forests in the Los Angeles Air Basin may be as high as 25-45 kg ha(-1) year(-1). Nitrogen deposition in these highly-exposed areas has led to N saturation of chaparral and mixed conifer stands. In N saturated forests high concentrations of NO3- are found in streamwater, soil solution, and in foliage. Nitric oxide emissions from soil and foliar N:P ratios are also high in N saturated sites. Further research is needed to determine the ecological effects of chronic N deposition, and to develop appropriate management options for protecting water quality and managing plant nutrient resources in ecosystems which no longer retain excess N.     

Receptor modeling of ambient particulate matter data using positive matrix factorization: review of existing methods

Methods for apportioning sources of ambient particulate matter (PM) using the positive matrix factorization (PMF) algorithm are reviewed. Numerous procedural decisions must be made and algorithmic parameters selected when analyzing PM data with PMF. However, few publications document enough of these details for readers to evaluate, reproduce, or compare results between different studies. For example, few studies document why some species were used and others not used in the modeling, how the number of factors was selected, or how much uncertainty exists in the solutions. More thorough documentation will aid the development of standard protocols for analyzing PM data with PMF and will reveal more clearly where research is needed to help future analysts select from the various possible procedures and parameters available in PMF. For example, research likely is needed to determine optimal approaches for handling data below detection limits, ways to apportion PM mass among sources identified by PMF, and ways to estimate uncertainties in the solution. The review closes with recommendations for documenting the methodological details of future PMF analyses.