Continuous emissions monitoring using spark-induced breakdown spectroscopy

A new technology for monitoring airborne heavy metals on aerosols and particulates based on spark-induced breakdown spectroscopy (SIBS) was evaluated at a joint U.S. Environmental Protection Agency (EPA)/U.S. Department of Energy test at the rotary kiln incinerator simulator (RKIS) facility at EPA/Research Triangle Park, NC, in September 1997. The instrument was configured to measure lead and chromium in a simulated combustion flue gas in real time and in situ at target levels of 15 and 75 micrograms/dry standard cubic meters. Actual metal concentrations were measured during the tests using EPA Reference Method (RM) 29. The SIBS technology detected both lead and chromium at the low- and high-level concentrations. Additionally, the hardware performed without failure for more than 100 hr of operation and acquired data for 100% of the RM tests. The chromium data were well correlated with concentration increases resulting from duct operations and pressure fluctuations that are known to entrain dust.     

Fluldized-Bed Combustion

The Fourth International Conference on Fluidized Bed Combustion (FBC) was held at The MITRE Corporation in McLean, VA, December 9 to 11, 1975. With attendees from Great Britain, West Germany, Japan, Canada, and Sweden, the conference apparently fulfilled its international scope and intent.

The objectives of the conference were to review the current state of technology in FBC, to promote technical information exchange on FBC and related areas, and to generate a useful technical information base for further FBC development. Throughout the conference, the goal of commercialization was repeatedly emphasized.

Sponsored by the U.S. Energy Research and Development Administration (ERDA) and coordinated by MITRE, this meeting was the most comprehensive event in the seven year series of conferences on this subject according to attendees. ERDA, the government’s lead agency in FBC technology development, is the principal sponsor and coordinator of the National Fluidized Bed Combustion Program with the goal of advancing the commercialization time frame for FBC. Prior conferences in this series were hosted by the Environmental Protection Agency (EPA) at about two year intervals at Hueston Woods, Ohio. The last EPA conference was held in October 1972.     

Continuous Emissions Monitoring Using Spark-Induced Breakdown Spectroscopy

ABSTRACT

A new technology for monitoring airborne heavy metals on aerosols and particulates based on spark-induced breakdown spectroscopy (SIBS) was evaluated at a joint U.S. Environmental Protection Agency (EPA)/U.S. Department of Energy test at the rotary kiln incinerator simulator (RKIS) facility at EPA/Research Triangle Park, NC, in September 1997. The instrument was configured to measure lead and chromium in a simulated combustion flue gas in real time and in situ at target levels of 15 and 75 u, g/dry standard cubic meters. Actual metal concentrations were measured during the tests using EPA Reference Method (RM) 29.

The SIBS technology detected both lead and chromium at the low- and high-level concentrations. Additionally, the hardware performed without failure for more than 100 hr of operation and acquired data for 100% of the RM tests. The chromium data were well correlated with concentration increases resulting from duct operations and pressure fluctuations that are known to entrain dust.     

Mercury Measurement and Its Control: What We Know,Have Learned,and Need to Further Investigate

ABSTRACT

Based on the available evidence of health effects, the U.S. Environmental Protection Agency (EPA) has been evaluating the need to regulate mercury releases to the environment. In response to the congressional mandates in The 1990 Clean Air Act Amendments (CAAA), the EPA has issued the Mercury Study Report and the Study of Hazardous Air Pollutant Emissions from Electric Utility Steam Generating Units Report. In spite of the enormous effort represented by these reports, as well as the efforts of both the U.S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI), in conducting the field measurement programs that form the basis for these reports, a definitive answer on the need for mercury regulation has not been found. However, the EPA, as well as other regulatory agencies and health researchers, have suggested a "plausible link" between anthropogenic sources emitting mercury and the methylation, bioaccumulation in the food chain, and adverse health effects in humans and wildlife.     

Summary of the 1991 EPRI/EPA/DOE SO2 Control Symposium

The 1991 SO₂ Control Symposium was held December 3-6, 1991, in Washington, D.C. The symposium, jointly sponsored by the Electric Power Research Institute (EPRI), the U.S. Environmental Protection Agency (EPA), and the U.S. Department of Energy (DOE), focused attention on recent improvements in conventional sulfur dioxide (SO₂) control technologies, emerging processes, and strategies for complying with the Clean Air Act Amendments of 1990. Its purpose was to provide a forum for the exchange of technical and regulatory information on SO₂ control technology. Over 800 representatives of 20 countries from government, academia, flue gas desulfurization (FGD) process suppliers, equipment manufacturers, engineering firms, and utilities attended. In all, 50 U.S. utilities and 10 utilities in other countries were represented. In 11 technical sessions, a diverse group of speakers presented 111 technical papers on development, operation, and commercialization of wet and dry FGD, Clean Coal Technologies, and combined sulfur dioxide/nitrogen oxides (SO₂/NO_x processes.     

Mercury Measurement and Its Control: What We Know,Have Learned,and Need to Further Investigate

ABSTRACT

Based on the available evidence of health effects, the U.S. Environmental Protection Agency (EPA) has been evaluating the need to regulate mercury releases to the environment. In response to the congressional mandates in The 1990 Clean Air Act Amendments (CAAA), the EPA has issued the Mercury Study Report and the Study of Hazardous Air Pollutant Emissions from Electric Utility Steam Generating Units Report. In spite of the enormous effort represented by these reports, as well as the efforts of both the U.S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI), in conducting the field measurement programs that form the basis for these reports, a definitive answer on the need for mercury regulation has not been found. However, the EPA, as well as other regulatory agencies and health researchers, have suggested a “plausible link” between anthropogenic sources emitting mercury and the methylation, bioaccumulation in the food chain, and adverse health effects in humans and wildlife.

Policy-makers have recognized that regulations must be based on good science and that a number of issues still remain. These issues can generally be grouped into four main categories: emissions inventory, control technology, fate of releases, and health effects. This paper will discuss recent, ongoing, and planned studies to address the remaining issues regarding the presence of mercury in the environment, with an emphasis on those studies that are directly related to the DOE/Federal Energy Technology Center’s (FETC) programmatic effort.     

Estimating Costs of Flue Gas Desulfurization Systems for Utility Boilers

In September 1973, PEDCo-Environmental Specialists was awarded a study by the U. S. Environmental Protection Agency to evaluate the cost of controlling sulfur dioxide and particulate emissions from selected utility boilers. Since that time, PEDCo has conducted additional studies for the U. S. EPA, state and local control agencies, and private industry on the costs of control technology and the reliability of sulfur dioxide control systems. Current work includes determining the feasibility and environmental impact of converting selected utility boilers to coal-firing to conserve the nation’s gas and oil supplies. This paper presents an overview of the status and costs of flue gas desulfurization (FGD) systems, and the factors relating to the variability in costs. It is based in part upon work performed in developing detailed FGD cost estimating manuals for EPA.     

Stationary Combustion NOX Control A Summary of the 1989 Symposium

This paper summarizes information and results presented at the 1989 Symposium on Stationary Combustion NOX Control, held March 6-9, 1989 in San Francisco. Cosponsored by the Electric Power Research Institute (EPRI) and the U.S. Environmental Protection Agency, (EPA) the symposium was the fifth in a biennial series.     

The 1999 Fresno Particulate Matter Exposure Studies: Comparison of Community,Outdoor, and Residential PM Mass Measurements

ABSTRACT

Two collaborative studies have been conducted by the U.S. Environmental Protection Agency (EPA) National Exposure Research Laboratory (NERL) and National Health and Environmental Effects Research Laboratory to determine personal exposures and physiological responses to par-ticulate matter (PM) of elderly persons living in a retirement facility in Fresno, CA. Measurements of PM and other criteria air pollutants were made inside selected individual residences within the retirement facility and at a central outdoor site on the premises. In addition, personal PM exposure monitoring was conducted for a subset of the participants, and ambient PM monitoring data were available for comparison from the NERL PM research monitoring platform in central Fresno. Both a winter (February 1-28, 1999) and a spring (April 19-May 16, 1999) study were completed so that seasonal effects could be     

Improvement of Hot–side Precipitator Performance with Sodium Conditioning—An Interim Report

The development of an unexpected, time-dependent degradation of performance of hot-side precipitators collecting ash from certain coals (usually low-sodium, low-sulfur coals) has caused serious problems at a number of major utility installations. A jointly funded research project was developed under the sponsorship of the U.S. Environmental Protection Agency, the Electric Power Research Institute, and Southern Company Services, Inc., to evaluate sodium conditioning as a possible solution to these performance deficiency problems.     

On-road facility to measure and characterize emissions from heavy-duty diesel vehicles

In response to lingering concerns about the utility of dynamometer data for mobile source emissions modeling, the U.S. Environmental Protection Agency (EPA) has constructed an on-road test facility to characterize the real-world emissions of heavy-duty trucks. The facility was designed to effectively demonstrate the full range of vehicle operation and to measure the emissions produced. Since it began operation, the facility has been continuously upgraded to incorporate state-of-the-art technology. Its potential uses include collecting modal emissions data, validating dynamometer test parameters and results, and demonstrating new emission control technologies.     

1987 Joint EPRI/EPA Symposium on Stationary Combustion NOX Control

From March 23rd to 26th, 1987, the city of New Orleans hosted 350 attendees, including representatives from 15 foreign countries, at the 1987 Joint Symposium on Stationary Combustion NO_x Control. Cosponsored by the Electric Power Research Institute (EPRI) and the U.S. Environmental Protection Agency (EPA), the symposium provided attendees the opportunity to hear 49 papers in nine sessions covering technological and regulatory developments on NO_x control in the United States and abroad since the May 1985 symposium in Boston. Session topics included general environmental issues, low-NO_x combustion equipment (i.e., low-NO_x burners, reburning, etc.), flue gas treatment, fundamental combustion research, and special issues for cyclone coal-fueled boilers, oil- and gas-fired boilers, and industrial combustion applications.

Advances to the state-of-the-art presented at this symposium include: improved and/or newly applied combustion modifications for pulverized coal-fired boilers; further analyses of reburning, the leading combustion modification option for cyclone-equipped boilers; initial experiences with catalytic flue gas treatment in Europe; studies of NO_x control retrofit options for oil- and gas-fired utility systems; and new technology developments for coal, oil, and gas fueled utility and industrial combustors.

This paper summarizes those presentations that discussed significant changes since May 1985 in areas of potential interest to EPRI and its utility members. Where appropriate, they include our perspectives on the applicability of these newly disclosed findings to utility systems.     

Pilot-Scale Evaluation of an Incinerability Ranking System for Hazardous Organic Compounds

The U.S. Environmental Protection Agency’s (EPA) hazardous waste incinerator performance standards specify a minimum destruction and removal efficiency (DRE) for principal organic hazardous constituents (POHCs) designated in the incinerator waste feed. In the past, selection of appropriate POHCs for incinerator trial burns has been based largely on their heats of combustion. Attempting to improve upon this approach, the University of Dayton Research Institute (UDRI), under contract to the EPA Risk Reduction Engineering Laboratory, has developed a thermal stability-based ranking of compound "incinerability". The subject study was conducted to evaluate the laboratory-developed ranking system in a pilot-scale incinerator.

Mixtures of POHCs, spanning the ranking scale from most- to least-difficult to destroy (Class 1 to Class 7, respectively), were prepared and combined with a clay-based sorbent matrix. These mixtures were then fed into the rotary kiln incineration system at the U.S. EPA Incineration Research Facility (IRF). In a series of five tests, the following conditions were evaluated: baseline/ typical operation; thermal failure (quenching); mixing failure (overcharging); matrix failure (low feed H/CI ratio); and a worst-case combination of the three failure modes.

Under baseline conditions, mixing failure, and matrix failure, kiln-exit DREs for each compound were comparable from test to test. Operating conditions in these 3 modes appeared to be sufficient to effect considerable destruction (greater than 99.99 percent DRE) of all compounds. As a result, separation of the highest-ranked POHCs from the lowest-ranked POHCs according to observed DRE was not possible; a correlation between POHC ranking and DRE could not be confirmed.

A correlation between predicted and observed incinerability was more evident for the thermal failure and worst-case conditions. Kiln-exit DREs for the four POHCs predicted to be most stable (those in Classes 1 and 2) ranged from 99% to 99.99% under these conditions, and were generally lower than DREs for the POHCs predicted to be more easily destroyed. Statistically significant correlations above the 99 percent and 93 percent confidence intervals were identified for the thermal-failure and worst-case tests, respectively.     

The dynamic links among energy consumption,tourism growth,and the ecological footprint: the role of environmental quality in 38 IEA countries

Environmental Science and Pollution Research - We examine the impact of energy consumption and tourism growth on the ecological footprints and economic growth of 38 International Energy Agency...     

Air pollutant source characterization using the revised regional haze tracking metric and a photochemical grid model and implications for regional haze planning

The 2017 revisions to the Regional Haze Rule clarify that visibility progress at Class I national parks and wilderness areas should be tracked on days with the highest anthropogenic contributions to haze (impairment). We compare the natural and anthropogenic contributions to haze in the western United States in 2011 estimated using the Environmental Protection Agency (EPA) recommended method and using model projections from the Comprehensive Air Quality Model with Extensions (CAMx) and the Particulate Source Apportionment Tool (PSAT). We do so because these two methods will be used by states to demonstrate visibility progress by 2028. If the two methods assume different natural and anthropogenic contributions, the projected benefits of reducing U.S. anthropogenic emissions will differ. The EPA method assumes that episodic elevated carbonaceous aerosols greater than an annual 95th percentile threshold are natural events. For western U.S. IMPROVE monitoring sites reviewed in this paper, CAMx-PSAT confirms these episodes are impacted by carbon from wildfire or prescribed fire events. The EPA method assumes that most of the ammonium sulfate is anthropogenic in origin. At most western sites CAMx-PSAT apportions more of the ammonium sulfate on the most impaired days to global boundary conditions and anthropogenic Canadian, Mexican, and offshore shipping emissions than to U.S. anthropogenic sources. For ammonium nitrate and coarse mass, CAMx-PSAT apportions greater contributions to U.S. anthropogenic sources than the EPA method assigns to total anthropogenic contributions. We conclude that for western IMPROVE sites, the EPA method is effective in selecting days that are likely to be impacted by anthropogenic emissions and that CAMx-PSAT is an effective approach to estimate U.S. source contributions. Improved inventories, particularly international and natural emissions, and further evaluation of global and regional model performance and PSAT attribution methods are recommended to increase confidence in modeled source characterization.

Implications: The western states intend to use the CAMx model to project visibility progress by 2028. Modeled visibility response to changes in U.S. anthropogenic emissions may be less than estimated using the EPA assumptions based on total U.S. and international anthropogenic contributions to visibility impairment. Additional model improvements are needed to better account for contributions to haze from natural and international emissions in current and future modeling years. These improvements will allow more direct comparison of model and EPA estimates of natural and anthropogenic contributions to haze and future visibility progress.     

Impact of underestimating the effects of cold temperature on motor vehicle start emissions of air toxics in the United States

Analyses of U.S. Environmental Protection Agency (EPA) certification data, California Air Resources Board surveillance testing data, and EPA research testing data indicated that EPA's MOBILE6.2 emission factor model substantially underestimates emissions of gaseous air toxics occurring during vehicle starts at cold temperatures for light-duty vehicles and trucks meeting EPA Tier 1 and later standards. An unofficial version of the MOBILE6.2 model was created to account for these underestimates. When this unofficial version of the model was used to project emissions into the future, emissions increased by almost 100% by calendar year 2030, and estimated modeled ambient air toxics concentrations increased by 6-84%, depending on the pollutant. To address these elevated emissions, EPA recently finalized standards requiring reductions of emissions when engines start at cold temperatures.     

Particulate matter emission rates from beef cattle feedlots in Kansas-reverse dispersion modeling

Open beef cattle feedlots emit various air pollutants, including particulate matter (PM) with equivalent aerodynamic diameter of 10 microm or less (PM10); however limited research has quantified PM10 emission rates from feedlots. This research was conducted to determine emission rates of PM10 from large cattle feedlots in Kansas. Concentrations of PM10 at the downwind and upwind edges of two large cattle feedlots (KS1 and KS2) in Kansas were measured with tapered element oscillating microbalance (TEOM) PM10 monitors from January 2007 to December 2008. Weather conditions at the feedlots were also monitored. From measured PM10 concentrations and weather conditions, PM10 emission rates were determined using reverse modeling with the American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model (AERMOD). The two feedlots differed significantly in median PM10 emission flux (1.60 g/m2-day for KS1 vs. 1.10 g/m2-day for KS2) but not in PM10 emission factor (27 kg/1000 head-day for KS1 and 30 kg/1000 head-day KS2). These emission factors were smaller than published U.S. Environmental Protection Agency (EPA) emission factor for cattle feedlots.     

Evaluation of Method 25 Nonmethane Organic Analyzer Design

Under contract to the U.S. Environmental Protection Agency, Research Triangle Institute has been conducting research to improve the precision, accuracy and limit of detection attainable with the EPA Method 25 nonmethane organic (NMO) analyzer. In Method 25, volatile organic carbon (VOC) samples are collected by drawing gas from an emitting source through a dry ice cooled sample trap and into an evacuated collection tank. The hydrocarbon concentration emitted from the source is determined on a per-carbon basis by catalytically converting the trap and tank sample fractions to CO₂ and quantitating the amount of CO₂ produced using the NMO analyzer. A reduction catalyst evaluation led to the selection of an NMO analyzer reduction catalyst which operates at a moderate temperature and displays no appreciable effect on peak shape. A gas chromatographlc column system which provides better permanent gas separation and hydrocarbon quantitation was also selected for use in the NMO analyzer.     

Treatment Technology Evaluation for Aqueous Metal and Cyanide Bearing Hazardous Wastes (F007)

As a result of recent developments In the area of hazardous waste management, the U.S. Environmental Protection Agency Is evaluating the performance of various technologies for the treatment and/or the destruction of certain wastes that are presently being disposed of In landfills and surface Impoundments. As a part of this program, the University of Cincinnati Is testing currently available treatment technologies that are applicable to metal- and cyanidebearing hazardous wastes at the U.S. EPA Test and Evaluation Facility In Cincinnati, Ohio. The following unit processes have been evaluated: alkaline chlorlnatlon, lime precipitation/ flocculation/settllng, multi-media filtration, anlon exchange, and cation exchange. Examination of several process configurations, utilizing the above-mentioned unit processes, did not produce any treatment train that could prevent codepositlon of cyanides and metals In the sludges when the feed stream contained mixed metals and complexed cyanides. It was also determined that special anion exchange resins are capable of removing the compiexed cyanides that are not destroyed by alkaline chlorlnatlon. Concentration of each of the metals in the final effluent from the cation exchange unit was less than 0.4 mg/L.     

PCDDs and PCDFs in human adipose tissue from the EPA FY82 NHATS repository

Analysis for tetra- through octachloro-PCDDs and PCDFs was completed for 46 tissue samples prepared from the U.S. Environmental Protection Agency (EPA) National Human Adipose Tissue Survey (NHATS). The samples were prepared as composites from over 900 specimens to represent the nine U.S. census divisions and three age groups (0–14, 15–44, and 45 plus years). The data demonstrate that PCDDs and PCDFs are prevalent in the general U.S. population and that differences exist with age.