远程控制软件pcAnywhere在空气质量监测系统中的应用

介绍了一款应用于空气质量监测系统中的优秀远程控制软件pcAnywhere,并具体说明了配置pcAnywhere对实现空气质量监测子站的管理与技术维护.     

Lidar Applications in Air Pollution Research and Control

The fundamental capabilities and limitations of the lidar (laser radar) in observing particulate concentrations in the atmosphere are discussed. The advantages of the lidar technique stem from its ability to obtain measurements remotely and at a high density in space and time. The quantitative application of the technique is limited by the accuracies with which: (1) the separate effects upon the return signal of back-scatter and attenuation may be identified; and (2) the optical parameters may be related to the characteristics of the aerosol. The main areas of utility for lidar in air pollution research and control are: (1) to observe the structure and height of mixing layers; (2) to measure the transport and diffusion of plumes or clouds of particulates; and (3) to remotely determine smoke-plume opacity. These applications are briefly reviewed and exemplified.     

Spatial Modeling for Air Pollution Monitoring Network Design: Example of Residential Woodsmoke

Abstract

The purpose of this paper is to demonstrate how to develop an air pollution monitoring network to characterize small-area spatial contrasts in ambient air pollution concentrations. Using residential woodburning emissions as our case study, this paper reports on the first three stages of a four-stage protocol to measure, estimate, and validate ambient residential woodsmoke emissions in Vancouver, British Columbia. The first step is to develop an initial winter nighttime woodsmoke emissions surface using inverse-distance weighting of emissions information from consumer woodburning surveys and property assessment data. Second, fireplace density and a compound topo-graphic index based on hydrological flow regimes are used to enhance the emissions surface. Third, the spatial variation of the surface is used in a location-allocation algorithm to design a network of samplers for the woodsmoke tracer compound levoglucosan and fine particulate matter. Measurements at these network sites are then used in the fourth stage of the protocol (not presented here): a mobile sampling campaign aimed at developing a high-resolution surface of woodsmoke concentrations for exposure assignment in health effects studies. Overall the results show that relatively simple data inputs and spatial analysis can be effective in capturing the spatial variability of ambient air pollution emissions and concentrations.     

城市空气质量周报编辑软件的开发与应用

用visual Foxpro6．0开发出了空气质量周报自动编辑软件。该软件能按《城市空气质量周报技术规定》，计算API、首要污染物、空气质量等级、空气质量状况等结果。这些结果通过软件中创建的word com服务器输出到word文档，实现了张家港市环境监测站周报出版工作的自动化。     

水环境监测的质量控制与保证措施

介绍了质量控制和质量保证体系，详细论述了质量监控方法及其注意事项，为样品监测的精确性提供了保障。     

水环境监测实验室的质量控制和质量保证

质量控制和质量保证是水环境监测工作的重要组成部分,质量体系是实验室内部实施质量管理的法规,覆盖了监测样品、监测过程、仪器设备、人员素质、设施与环境、量值溯源与校准、检验方法和化学试剂等全部质量控制要求。能够准确地反应水环境质量现状和预测污染的发展趋势。     

Design of Adsorption Equipment in Air Pollution Control

The purpose of this paper is to provide a helpful tool for the design of adsorption equipment, recognizing in particular the recent, more stringent regulations on air pollution. This work is based on an earlier paper by Hougen and Marshall,¹ who developed therein an analytical adsorption model. Under certain assumptions, especially that of linear adsorption equilibrium, it is possible to express the results in the form of convenient usable charts. Although more sophisticated models² have recently been developed, the numerical effort involved in solving the associated partial differential equations is such that practical application is often questionable.     

Impact of Toll Removal on Air Particulate Concentration in Jacksonville,Florida

The concentration of total suspended particulate (TSP) matter was determined at commercial, residential, rural and industrial sites in metropolitan Jacksonville during the summers of 1989 and 1990. These data were compared to samples taken at the Mathews Bridge Toll Plaza in 1989 and at a similar location one year later, after removal of the toll facility. All samples were analyzed by reflectance analysis and the approximate elemental carbon content used to estimate the contribution of vehicular traffic at the roadway. The results indicate a significant improvement in air quality at the location of the previous toll facility, but did not show that a widespread improvement resulted from the removal of tolls in Jacksonville, Florida.     

Air Quality Monitoring During Construction and Initial Occupation of a New Building

Air quality monitoring was conducted during the late construction and early occupation stages of the College of DuPage Student Resource Center (SRC) addition from April 24,1995, to July 20,1995. Chemical contaminants monitored included combustibles; cleaning solvents; and human, furniture, and carpeting effluents. Carbon dioxide, carbon monoxide, ethanol, propane, 3-pentanone, methyl cyclohexane, methyl formate, tetrahydrofuran, methyl methacrylate, and cyclohexane were used as calibration standards for continuous infrared absorption measurements. Indoor water content, outdoor relative humidity, indoor and outdoor temperatures, and indoor airborne particulate matter were measured. After most construction and indoor painting and carpeting were completed, a two-week air-out was performed using a continuous supply of fresh air, without recirculated air. This resulted in a low "case study" level of contaminants. Contaminant levels increased significantly after furniture and people move-ins and student use. Contaminant level changes were observed during typical indoor construction days, before and after a power outage-caused loss of ventilation, and in the presence of carpentry machines. A "naive" sensory panel contributed its "perception" of air quality, and anair quality survey was conducted among new building employees. No significant or consistent effects of indoor contaminants or indoor temperature upon indoor perception were noted. An inverse relationship between indoor air quality perceptions and the outdoor Temperature-Humidity Index was found.     

Canadian Activities in Ambient Air Quality Criteria and Development of Standards

Within recent years, increasing attention has been directed to the determination of contaminant levels in urban and industrial areas involving particulate matter (dustfall, suspended matter and smoke), sulfur dioxide, hydrogen sulfide, fluorides, ozone or oxidant, oxides of nitrogen and polycyclic aromatic hydrocarbons. However, with regard to criteria and evaluation of effects, none of these pollutants has been studied as thoroughly as sulfur dioxide. Presently, three provinces in Canada have adopted acts or regulations dealing with the control of air pollution. The Ontario Act, passed in 1958 and amended in 1963 and 1964, is the most comprehensive in scope. The Damage by Fumes Arbitration Act of Ontario provides for the awarding of compensation where crops, trees or other vegetation is damaged by sulfur fumes arising from the smelting or roasting of nickel-copper ore or iron ore or from the treatment of sulfides for the production of sulfur of sulfuric acid for commercial purposes. Regulations have also been enacted in Manitoba and Alberta. A provincial act is under consideration in Saskatchewan.     

Relationship of Particulate Control,SO2 Removal,and Waste Management

Results with the EPRI 2.5 MW(e) Integrated Environmental Control Pilot Plant (IECPP) indicate the interrelationship of particulate penetration, SO₂ scrubber operation, waste production, and waste properties. Tests compared a fabric filter/wet scrubber and ESP/wet scrubber, the latter operated to simulate 1979 New Source Performance Standards (NSPS), 1971 NSPS, and pre-NSPS ESP units. Tests were conducted with low-sulfur coal producing a flue gas concentration of400ppm; flue gas spiking could be used to increase SO₂ to 2000 ppm. Scrubber waste was dewatered in a thickener and vacuum belt filter (to 55 percent solids content), and mixed with fly ash. The pilot SO₂ scrubber—when preceded by an ESP and forced to operate in zero-discharge—captured less SO₂ than when preceded by a fabric filter. Also, scrubber operation with the ESP produced a greater quantity of waste with difficult handling characteristics, as compared to operation with the fabric filter. These difficulties occurred with particulate penetration above 0.10 lb/MBtu, which could reduce reagent utilization to 80percent. These results are attributable to inhibited limestone dissolution due to accumulation of an aluminum/fluoride compound. For both lowsulfur and simulated high-sulfur test conditions, allowing wastewater discharge to purge aluminum/fluoride content restored performance to design levels. Particulate control efficiency also affected solid waste physical properties. The fabric filter/wet scrubber produced the lowest solid waste permeability (10^?8 cm/s). ESP operation at 1979 NSPS and pre-1971 NSPS ESPs increased solid waste permeability to 10^?7 and 10^?6 cm/s, respectively. These results are meaningful for SO₂ scrubbers both for new plants and for retrofit to units with pre-NSPS ESPs, and could become significant with the increasing trend to restricted water discharge.     

Some Basic Consideration in the Design of an Air Pollution Monitoring System

Quantified air quality and meteorological information provided by an air pollution monitoring system must be geared to the legally prescribed functions of the control agency. The network must be treated as a vital component of the total integrated data system that supports agency activities in air resources management and control. It should be closely interphased with data systems for emission inventory, registration and permits, violations and complaints, fuel use, emission reduction plans, land use, demographic projections, and urban planning. Compatibility with neighboring and statewide or regionwide data systems is essential for coordination of effort, especially under episode conditions.

The network should be planned on three levels, static, semi-automatic, and fully automatic, to provide monthly, daily, and up-to-the-minute measurements, respectively. Optimization of network specifications requires a three-way balance of hardware, control objectives, and agency resources (capital facilities, manpower, funding, etc.), of which the first two are realistically governed by the third.

A monitoring network could serve a wide range of functions, and there are pressures and temptations to cater to all possible users. A number of functions are listed; an order of priority should be determined. Experience shows that far more data tend to be generated than can be analyzed, assimilated, and utilized. Rapid data acquisition and on-line processing capabilities of present-day automatic networks could, without effective planning, result in mountainous backlogs of unassimilated information.

A systems engineering approach to planning will ascertain that preliminary requirements are critically scrutinized, and only genuine requirements that meet the test of constraints (natural environment, economic, legal, social, political constraints, and manpower resources) will be translated into performance specifications. By means of this approach, design characteristics that are extraneous or peripheral to the principal network functions can be identified as low priority luxuries, whereas seemingly expensive items may be justified on the basis of data reliability or long-range savings in operation and maintenance requirements.     

Development and Use of a Disaggregated Emissions Inventory for Air Quality Planning in Washington,DC

The Metropolitan Washington Council of Governments (COG) is responsible for developing an Air Quality Plan which will produce attainment of the O₃ and 8 h CO standards in the Washington area by 1987. In order to define as precisely as possible the sources of emissions in the area, a disaggregated emissions inventory was prepared. For mobile sources, this included classification of vehicle type, portion of the trip cycle, and purpose of trip. For nonhighway sources, individual source types were identified. All emissions were assigned to 5 km × 5 km grids and summed to obtain local, state, and/or regional totals. The inventory, although expensive and time-consuming, is a useful tool for decision makers who are responsible for implementing measures to control emissions.     

植物监测在环评和环境管理中的应用

植物监测在某些方面具有理化监测不可替代的优势，利用植物监测来评价环境污染状况和处理环境污染纠纷已取得了明显效果。但植物监测与评价的方法尚需标准化和规范化，有待进一步研究和完善。     

环境监测实验室内质量控制体系的设想

环境监测实验室质量控制足环境监测质量保汪的蘑要组成部分。山于实验室内质量控制工作量大，质控工作往往流于形式。因此，有必要建立一套完整又便捷的实验室内质量控制体系，在质控质量上发挥重要作用。对体系建立前提条件和体系建立的，思路进行了阐述。对体系设计基础——计算机网络技术的运用。实验室内质量评价高效、便捷的数字化应用平台的建口进行了设想。