Road dust resuspension in the vicinity of limestone quarries in Jordan

Many areas in Jordan suffer from elevated levels of coarse particulate matter (PM10). One potentially significant source of the observed PM is the resuspension of road dust in the vicinity of limestone quarries. To obtain data to assess the impact from this source, PM10 road dust resuspension factors near Abusiiah, a town to the north east of Amman surrounded by many quarries and brick factories, were measured. Measurements included PM10 mass, particle size distributions, wind speed, and wind direction. The results showed that PM10 concentrations could be as high as 600 microg/m3, and most of the airborne PM is in the coarse fraction. Loading trucks play a major role in resuspending road dust, with an observed PM10 emission rate of >6000 mg/km.     

Characteristics of Road Dust from Different Sampling Sites in Northern Taiwan

Abstract

Road dust contributes a large percentage of the atmosphere’s suspended particles in Taiwan. Three road dust samples were collected from downtown, electrical park, and freeway tunnel areas. A mechanical sieve separated the road dust in the initial stage. Particles >100 μm were 75%, 70%, and 60% (wt/wt), respectively, of the samples. Those particles <37 μm were resuspended in another mixing chamber and then collected by a Moudi particle sampler. The largest mass fraction of resuspended road dust was in the range of 1–10 μm. Ultrafine particles (<1 μm) composed 33.7, 17, and 7.4% of the particle samples (downtown, electrical park, and freeway tunnel, respectively). The road dust compositions were analyzed by inductively coupled plasma (ICP)-atomic emissions spectroscopy and ICP-mass spectrometry. The highest concentration fraction contained more aluminum (Al), iron (Fe), calcium (Ca), and potassium than other elements in the road dust particle samples. Additionally, the sulfur (S) content in the road dust from the electrical park and freeway tunnel areas was 2.1 and 3.4 times the downtown area sample, respectively. The sulfur originated from the vehicle and boiler oil combustion and industrial manufacturing processes. Furthermore, zinc (Zn) concentration in the tunnel dust was 2.6 times that of the downtown and electrical park samples, which can be attributed to vehicle tire wear and tear. Resuspended road dusts (<10 μm) from the downtown and freeway tunnel areas were principally 2.5–10 μm Al, barium (Ba), Ca, copper (Cu), Fe, magnesium (Mg), sodium (Na), antimony (Sb), and Zn, whereas arsenic (As), chromium (Cr), and nickel (Ni) were predominant in the ultrafine particle samples (<1 μm). Al, Ba, and Ca are the typical soil elements in coarse particles; and As, and Cr and Ni are the typical fingerprint of oil combustion and vehicle engine abrasion in ultrafine particles. There was a special characteristic of resuspension road dust at electrical park, that is, many elements, including As, Ba, Ca, cadmium, Cr, Cu, Fe, manganese (Mn), Ni, lead (Pb), S, vanadium (V), and Zn, were major in ultrafine particles. These elements should be attributed to the special manufacturing processes of electric products.     

Resuspension of coarse particles in the region of Chernobyl

Measurements of resuspension into air in the coarse particle range (>10 μm in aerodynamic diameter) were performed as part of a field measurement experiment at four sites around Chernobyl during wind-driven and anthropogenic enhanced resuspension (agricultural activities). Caesium-137 was used to quantify the magnitude of resuspension. The mean resuspension factor of coarse particles was between 1×10^-10 and 6×10^-10 m^-1 for wind-driven resuspension. During agricultural activities, the resuspension increased by up to three orders of magnitude. Coarse particles comprised about one-third of the total amount of resuspended Caesium-137. The activity size distribution of Caesium-137 was not uniform in the coarse particle range: approximately 44% of the activity was found in the range 10–20 μm aerodynamic diameter. The determination of the number concentration of particles >20 μm aerodynamic diameter showed a linear relation between particle number and activity: the mean activity per particle was 0.75±0.15 μBq at the site Novozybkov, Russia. The resuspension factor was found to decrease exponentially with increasing relative soil moisture content. At higher soil humidity, the portion of coarse particles of the total resuspended activity was larger.     

Ozone Levels in the Vicinity of 33 Cities

Hourly concentrations of ozone were measured by the chemiluminescence method during the summer of 1971 in the vicinity of 33 cities. A listing was made of the percent of time the National Air Quality Standard for photochemical oxidants was violated. At 4 selected cities the daytime and nighttime average concentrations were related to wind directions showing the direction to source areas. Another set of tables and graphs was used to show the source directions for high concentrations (equal to or above 120 µg/m³) and disregarding the times of more usual or background concentrations. Numerous occasions of high ozone concentrations occurred when wind directions were apparently from areas with low concentrations of the known precursors. Because of this, other sources of ozone were considered such as thunderstorms and the transport of ozone for long distances. Examples of ozone concentrations during thunderstorms or related to long distance transport are cited.     

Community Odours in the Vicinity of a Petrochemical Industrial Complex

Community odours in the vicinity of an oil refinery and petrochemical industrial area were studied by an observer network throughout an entire year. Odour episodes occurred during 0.86 percent of the time of the study. Odour reports increased closer to the refinery. Within a range of 12.5 km, more than 50 percent of the odours were estimated to originate from the refinery. The most typical odour was that of reduced sulphur compounds (35.2 percent of all observations). Odour episodes occurred during low wind velocities and high humidity. Odours were most frequent during January-April, and were usually reported early in the morning. The odours were evidently due to the general operation of the plants, as no single activity or in-plant factor could be identified as the source of the odours.     

Modeling Atmospheric Mercury Deposition in the Vicinity of Power Plants

Abstract

Two mathematical models of the atmospheric fate and transport of mercury (Hg), an Eulerian grid–based model and a Gaussian plume model, are used to calculate the atmospheric deposition of Hg in the vicinity (i.e., within 50 km) of five coal–fired power plants. The former is applied using two different horizontal resolutions: coarse (84 km) and fine (16.7 km). More than 96% of the power plant Hg emissions are calculated with the plume model to be transported beyond 50 km from the plants. The grid–based model predicts a lower fraction to be transported beyond 50 km: >91% with a coarse resolution and >95% with a fine resolution. The contribution of the power plant emissions to total Hg deposition within a radius of 50 km from the plants is calculated to be <8% with the plume model, <14% with the Eulerian model with a coarse resolution, and <10% with the Eulerian model with a fine resolution. The Eulerian grid–based model predicts greater local impacts than the plume model because of artificially enhanced vertical dispersion; the former predicts about twice as much Hg deposition as the latter when the area considered is commensurate with the resolution of the grid–based model. If one compares the local impacts for an area that is significantly less than the grid–based model resolution, then the grid–based model may predict lower local deposition than the plume model, because two compensating errors affect the results obtained with the grid–based model: initial dilution of the power plant emissions within one or more grid cells and enhanced vertical mixing to the ground.     

Characteristics of Oil Field Emissions in the Vicinity of Tulsa,Oklahoma

In 1988 a study was undertaken in the vicinity of Tulsa, Oklahoma to determine the characteristics, composition, and relative concentrations of the oil field emissions of volatile organic compounds (VOC). Forty grab samples (10-minute) using stainless steel canisters were collected from five different stages of crude oil production over an 80-day period (August-October). The samples were analyzed at the Tulsa City-County Health Department’s laboratory, using cryogenic preconcentration, gas chromatographic separation, and flame ionization detection. The six prevalent components of the oil field emissions were ethane, propane, 2- methyl propane, n-butane, 2-methylbutane, and n-pentane with propane predominating. The composition is unique with higher amounts of propane than ethane and is different from natural gas which has more abundant ethane. Decreases occurred in the amounts of light compounds, namely, ethane and propane from well heads through refinery tanks. The bulk of these losses appeared to be at the well heads and gathering tanks.     

A Microscopic Classification of Settled Particulates in the Vicinity of a Found Coke-Making Operation

The purpose of this study was the specific identification of the components of settleable particulate samples collected near a coke-making operation. The identification technique employed is a new application of reflected-light microscopic examination of polished sections of the material. The inherent optical characteristics of the individual particles are utilized to classify them as coal (high?, medium?, and low-volatile), coke (coke balls, pyrolytic carbon, slot-oven coke, and char), fly ash or mineral matter. The application of this method of analysis is unique in that classification of particles is based on these inherent optical properties and not on shape, color, or other subjective criteria. This microscopic classification technique is based on accepted methods and should be generally applicable by petrographers on the basis of the photomicrographs and the detailed procedures which are included. On the basis of the data obtained during a six-month study near a coke-making operation it is concluded that material handling and stockpiling operations are major contributors to settled particulate deposition, while coke oven charging was not a major source. This study has shown that a broad program of engineering control will be required to significantly reduce settled particulate deposition in the immediate vicinity of a coke-making operation.     

Characterization of the Khamaseen (spring) dust in Jordan

During the spring each year, the Eastern Mediterranean is affected by Khamaseen dust cyclones sourced from the North African Sahara. In order to characterize Khamaseen dust in Jordan, we collected dust from ten localities during the spring of 2006. The collected dust was analyzed for grain size, mineralogy, and chemical composition. The dust is predominantly aluminosilicates (clay minerals and feldspars), quartz and carbonates with minor amounts of phosphate. The particles are mostly subrounded to subangular and generally between 5 and 20 μm in size. The majority of the elements analyzed have a natural abundance and distribution. However, several elements such as As, Cd, Cr, Cu, Pb, Se and Zn have higher than natural abundances due to anthropogenic enrichment by various enrichment factors. The analyzed dust samples are chemically homogenous, indicating a similar provenance and good mixing by the Khamaseen winds. The rare earth elements patterns are similar to those of the upper continental crust composition and average shale. Total amount of dust deposited on Jordan during the spring of 2006 is around 0.3 million tons.     

Potentially Allergenic Airborne Particles in the Vicinity of a Yeast and Penicillin Production Plant

Potential health risks of exposure to emissions of a yeast and penicillin production plant were investigated by measuring viable particles and protein contents of particles in ambient air. The results showed a clear decrease of the downwind number of yeast colonyforming units with increasing distance from the source. Upwind the number of yeast colony-forming units was zero. Identification showed that nearly all yeast were of the species Saccharomlces cerevisiae. Such a trend could not be found for the total number of colony-forming units (yeasts, molds, and bacteria) although the upwind concentration was slightly lower than the downwind concentration. The downwind protein concentration was significantly elevated compared to the upwind concentration.     

Metals distribution in soils around the cement factory in southern Jordan

Thirty one soil samples were collected from south Jordan around the cement factory in Qadissiya area. The samples were obtained at two depths, 0-10 cm and 10-20 cm and were analyzed by atomic absorption spectrophotometery for Pb, Zn, Cd, Fe, Cu and Cr. Physicochemical factors believed to affect their mobility of metals in soil of the study area were examined such as; pH, TOM, CaCO3, CEC and conductivity. The relatively high concentrations of lead, zinc and cadmium in the soil samples of the investigated area were related to anthropogenic sources such as cement industry, agriculture activities and traffic emissions. It was found that the lead, zinc and cadmium have the highest level in area close to the cement factory, while the concentration of chromium was low. This study indicate that all of the metals are concentrated on the surface soil, and decreased in the lower part of the soil, this due to reflects their mobility and physical properties of soil and its alkaline pH values. The use of factor analysis showed that anthropogenic activities seem to be the responsible source of pollution for metals in urban soils.     

Adherence of Sulfur Dioxide Concentrations in the Vicinity of a Steam Plant to Plume Dispersion Models

Air monitoring data for a calendar year at one of the TVA power plants has been used to evaluate the appropriateness of the Sutton, the Bosanquet and Pearson, and the USPHS-TVA atmospheric dispersion models to predict ground level concentrations of sulfur dioxide from emission and meterological data. Aerometric data included one half hourly average sulfur dioxide concentrations, recorded by four Thomas autometers, and the necessary meterological parameters for the solving of atmospheric dispersion models. Based on these meterological parameters and observed plume rise data, over 4000 one half hourly average maximum and minimum expected ground line sulfur dioxide concentrations were predicted for each of the above dispersion models by the use of computer techniques. The plant is a line source; however, an empirical correction was applied to emission data to reduce them to emissions for an equivalent point source. The predicted sulfur dioxide levels for each of the dispersion models were compared to the measured levels throughout the year. Three different sets of diffusion coefficients were applied to the Sutton model and successful predictions, according to a criterion utilizing an acceptable range of concentration, varied from 66 to 93%. The Bosanquet and Pearson model produced successful predictions 90% of the time, while the USPHS-TVA model was successful 94% of the time.Unsuccessful predictions were primarily overestimates.     

Dust build-up on surfaces in the indoor environment

The concentration and the composition of dust in the indoor environment has been associated with reported symptoms of the sick building syndrome. Levels of airborne concentrations of dust particles are well known. However, the relation to dust on surfaces for office environments are not well described. In this study, 662 measurements were performed of surface dust concentrations on hard surfaces in 19 buildings within Harvard University based on a sticking gelatine foil method. The measure is the dust covered area of the surface as a percentage. In three offices, the build-up of dust on surfaces was measured for a period of five days. Close to these surfaces the airborne PM_2.5 and PM₁₀ particle mass concentrations were measured simultanously. A significant correlation between the dust build-up and the difference between the PM₁₀ and the PM_2.5 was established. The particle size distribution was measured by means of an Aerodynamic Particle Sizer. The mean dust build-up normalized with the measured PM₁₀ was approximately four times higher than the equivalent calculated by a deposition model. This may in part be due to the effect of preferred orientation when particles settle to a surface. Different data for dust on surfaces and airborne particles in offices were compared. The levels of airborne particles in offices in Europe seem to be higher than the levels in the US.     

An Air Quality Study in the Vicinity of Lewiston,Idaho, and Clarkston,Washington

This report summarizes data and conclusions from a one-year, interstate air quality study conducted in 1962 in the vicinity of Lewiston, Idaho, and Clarkston, Wash.^{1, 6, 7} The sampling and analyses techniques were selected to permit differentiation between possible sources and types of air pollutants.     

Vanadium Contamination of Lichens and Tree Foliage in the Vicinity of Three Oil-Fired Power Plants in Eastern Canada

Abstract

Vanadium concentrations were determined by neutron activation analysis in samples of epiphytic lichens and tree foliage collected at sites along 10 transects in the vicinity of three oil-fired power plants in eastern Canada. The vanadium concentrations in plants decreased exponentially with increasing distance from the power plants. Substantially larger concentrations of vanadium occurred in lichen tissues than in tree foliage. Lichens clearly are more suitable for bio-monitoring environmental contamination with vanadium near oil-fired power plants.     

The effect of weather data on the spread of COVID-19 in Jordan

Environmental Science and Pollution Research - This study aims to analyze the correlation between the daily confirmed COVID-19 cases in Jordan and metrological parameters including the average...     

Integrated assessment of the control of wastewater pollution in Zarqa Governate, Jordan

Zarqa, the second largest city in Jordan and home of 52% of the industries in the country, suffers the worst water shortage and pollution. The purpose of this paper is to illustrate the potential problems associated with the pollution by industrial and municipal wastewater in Zarqa region and the possibilities for its control. The paper examines the major causes of pollution, the qualities and the quantities of pollutants, and the major obstacles facing the existing practices in the Kherbit As-Samra Wastewater Treatment Plant. The physical, chemical, biological and hydraulic overloading of As-Samra cause the station to be inefficient. Development of alternative solutions, taking into consideration all technical, financial, social, geographical and political constraints, is a challenge for the decision-makers in the water industry. The analysis and findings of this paper will lay the ground and assist decision-makers in setting up programmes to control wastewater pollution in the region.     

Limestone Dissolution in Flue Gas Scrubbing: Effect of Sulfite

Batch limestone dissolution experiments were carried out in a pH stat apparatus at 55°C with CO2 sparging and dissolved sulfite. Particle size distribution, utilization, sulfite in solution, limestone type, and the approach to calcite equilibrium were all found to contribute to the limestone reactivity. In the absence of sulfite, limestone dissolution was controlled solely by mass transfer. For a given stone under mass transfer control, film thickness was found to be independent of pH. The dissolution rate in the presence of sulfite was controlled by a combined surface kinetics/mass transfer regime. SEM micrographs supported this conclusion. A surface rate correlation was developed which accounted for observed inhibition by an inverse dependence on calcium sulfite concentration at the limestone surface. While the form of the rate expression was applicable to all stones, the surface rate constant was stone dependent. A computer code which accounted for mass transfer with surface kinetics was tested against experimental observations of four limestone types. Changes in pH and the concentrations of calcium, carbonate, sulfite, sulfate, and adipic acid were accurately modeled.