Assessment of the application of an ecotoxicological procedure to screen illicit toxic discharges in domestic septic tank sludge

An innovative screening procedure has been developed to detect illicit toxic discharges in domestic septic tank sludge hauled to the Montreal Urban Community waste-water treatment plant. This new means of control is based on an integrative approach, using bioassays and chemical analyses. Conservative criteria are applied to detect abnormal toxicity with great reliability while avoiding false positive results. The complementary data obtained from toxicity tests and chemical analyses support the use of this efficient and easy-to-apply procedure. This study assesses the control procedure in which 231 samples were analyzed over a 30-month period. Data clearly demonstrate the deterrent power of an efficient control procedure combined with a public awareness campaign among the carriers. In the first 15 months of application, between January 1996 and March 1997, approximately 30% of the 123 samples analyzed showed abnormal toxicity. Between April 1997 and June 1998, that is, after a public hearing presentation of this procedure, this proportion dropped significantly to approximately 9% based on 108 analyzed samples. The results of a 30-month application of this new control procedure show the superior efficiency of the ecotoxicological approach compared with the previously used chemical control procedure. To be able to apply it effectively and, if necessary, to apply the appropriate coercive measures, ecotoxicological criteria should be included in regulatory guidelines.     

Estimation of the environmental risk posed by landfills using chemical, microbiological and ecotoxicological testing of leachates

The leachates from 22 municipal solid waste (MSW) landfill sites in Southern Poland were characterized by evaluation of chemical, microbiological and ecotoxicological parameters. Chemical analyses were mainly focused on the identification of the priority hazardous substances according to Directive on Priority Substances, 2008/105/EC (a daughter directive of the WFD) in leachates. As showed, only five substances (Cd, Hg, hexachlorobutadiene, pentachlorobenzene and PAHs) were detected in the leachates. The compounds tested were absent or present at very low concentrations. Among them, only PAHs were found in all samples in the range from 0.057 to 77.2 μg L⁻¹. The leachates were contaminated with bacteria, including aerobic, psychrophilic and mesophilic bacteria, coliform and fecal coliforms, and spore-forming-bacteria, including Clostridium perfringens, and with filamentous fungi. From the analysis of specific microorganism groups (indicators of environmental pollution by pathogenic or opportunistic pathogenic organisms) it can be concluded that the landfill leachates showed sanitary and epidemiological hazard. In the ecotoxicological study, a battery of tests comprised of 5 bioassays, i.e. Microtox®, Spirotox, Rotoxkit F™, Thamnotoxkit F™ and Daphtoxkit F™ magna was applied. The leachate samples were classified as toxic in 13.6%, highly toxic in 54.6% and very highly toxic in 31.8%. The Spirotox test was the most sensitive bioassay used. The percentage of class weight score was very high - above 60%; these samples could definitely be considered seriously hazardous and acutely toxic to the fauna and microflora.No correlations were found between the toxicity values and chemical parameters. The toxicity of leachate samples cannot be explained by low levels of the priority pollutants. It seems that other kinds of xenobiotics present in the samples at subacute levels gave the high aggregate toxic effect.The chemical, ecotoxicological and microbiological parameters of the landfill leachates should be analyzed together to assess the environmental risk posed by landfill emissions.     

Ecotoxicological and chemical evaluation of phenolic compounds in industrial effluents

The aim of this paper was to evaluate the ecotoxicological response of industrial effluents containing phenolic compounds. All complex effluents collected from a chemical plant and then after both a chemical–physical and biological treatment were characterised with chemical analysis, biodegradability tests and four ecotoxicological tests (Daphnia magna, Artemia salina, Brachionus plicatilis and Vibrio fisheri with Microtox^®). The evaluation of the chemical and ecotoxicological data was useful for predicting the effect of the raw effluent on the treatment plant and the impact of the final treated effluent on the receiving water. Besides the toxicity of the effluent from the chemical plants, the acute toxicity of its main components was also determined. The results of the tests and toxicity data from literature were transformed in Toxic Units (TUs). Effluent toxicity was under- or over-estimated by calculating the sum of the TUs of the individual components, depending on which toxicity data and test organisms were used.     

Efficient model calibration method based on phase experiments for anaerobic–anoxic/nitrifying (A2N) two-sludge process

A systematic calibration and validation procedure for the complex mechanistic modeling of anaerobic–anoxic/nitrifying (A2N) two-sludge system is needed. An efficient method based on phase experiments, sensitivity analysis, and genetic algorithm is proposed here for model calibration. Phase experiments (anaerobic phosphorus release, aerobic nitrification, and anoxic denitrifying phosphate accumulation) in an A2N sequencing batch reactor (SBR) were performed to reflect the process conditions accurately and improve the model calibration efficiency. The calibrated model was further validated using 30 batch experiments and 3-month dynamic continuous flow (CF) experiments for A2N-SBR and CF-A2N process, respectively. Several statistical criteria were conducted to evaluate the accuracy of model predications, including the average relative deviation (ARD), mean absolute error (MAE), root mean square error (RMSE), and Janus coefficient. Visual comparisons and statistical analyses indicated that the calibrated model could provide accurate predictions for the effluent chemical oxygen demand (COD), ammonia nitrogen (NH₄ ⁺-N), total nitrogen (TN), and total phosphorus (TP), with only one iteration.

     

Comparison of test procedures for sediment toxicity evaluation with Vibrio fischeri bacteria

The use of bacterial luminescence assays is particularly effective in the contaminated sediment evaluation. In the present study, a comparison was made of different baterial luminescence assays including acute toxicity of elutriates with Microtox® and LUMIStox®; chronic toxicity of elutriates with LUMIStox®; and, acute toxicity of solvent extracts with both the tests and the Solid Phase test with Microtox. The toxicity assay procedures were utilised for the Po River sediment toxicity evaluation, testing samples with different physical and chemical characteristics. The results evidentiated that each sediment test procedures provided indipendent and complementary ecotoxicological responces usefull for a sediment classification of the most polluted samples.     

Ecotoxicological assessment of oil-based paint using three-dimensional multi-species bio-testing model: pre- and post-bioremediation analysis

The present study validates the oil-based paint bioremediation potential of Bacillus subtilis NAP1 for ecotoxicological assessment using a three-dimensional multi-species bio-testing model. The model included bioassays to determine phytotoxic effect, cytotoxic effect, and antimicrobial effect of oil-based paint. Additionally, the antioxidant activity of pre- and post-bioremediation samples was also detected to confirm its detoxification. Although, the pre-bioremediation samples of oil-based paint displayed significant toxicity against all the life forms. However, post-bioremediation, the cytotoxic effect against Artemia salina revealed substantial detoxification of oil-based paint with LD₅₀ of 121 μl ml^?1 (without glucose) and >?400 μl ml^?1 (with glucose). Similarly, the reduction in toxicity against Raphanus raphanistrum seeds germination (%FG?=?98 to 100%) was also evident of successful detoxification under experimental conditions. Moreover, the toxicity against test bacterial strains and fungal strains was completely removed after bioremediation. In addition, the post-bioremediation samples showed reduced antioxidant activities (% scavenging?=?23.5?±?0.35 and 28.9?±?2.7) without and with glucose, respectively. Convincingly, the present multi-species bio-testing model in addition to antioxidant studies could be suggested as a validation tool for bioremediation experiments, especially for middle and low-income countries.

?

     

Evaluation of effectiveness of EDTA and sodium thiosulfate in removing metal toxicity toward sea urchin embryo-larval applying the TIE

Since the development of the TIE (Toxicity Identification and Evaluation) in 1988 it has been assumed that the capacity of EDTA and sodium thiosulfate to complex some metals, and thus remove their toxicity, can be applied to both freshwater and seawater ecotoxicological tests and the results subsequently interpreted. However, it is now known that there is a wide variability in the extent of this complexation. In this context, the removal of toxicity caused by the presence of Hg²⁺, Cd²⁺, Cu²⁺, Cr⁶⁺, Zn²⁺, Ni²⁺, Pb²⁺, Ag¹⁺ and Se²⁺, through metal complexation by EDTA and sodium thiosulfate, in relation to the performance of embryo-larval tests with the sea urchin Arbacia lixula was investigated. It was observed that EDTA was capable of removing the toxicity of Pb²⁺, Zn²⁺ and Cu²⁺ while sodium thiosulfate only reduced the toxicity of Ag¹⁺. Compared to the complexation observed in freshwater ecotoxicological tests, the complexing agents used in this study (EDTA and sodium thiosulfate) have a lower capacity to complex metals in the marine ecotoxicological test with A. lixula.     

Review of Federally Sponsored Research on Diesel Exhaust Odors

The information presented in this paper is directed to persons concerned with control of exhaust odors from diesel-engine-powered vehicles. This paper summarizes projects sponsored by the Environmental Protection Agency (EPA) over the past years in the field of diesel-exhaust odor. These investigations have concentrated on developing measurement methods for quantifying different odor levels, evaluating various odor control methods, and evaluating public opinions of such odors.

A human panel method using odor reference standards has been found suitable to measure these odor levels. In addition to this technique, chemical characterization work has been sponsored under a project jointly sponsored by the Coordinating Research Council and the EPA to isolate and identify those species responsible for the odor.

Knowledge of these odorous compounds and the techniques necessary to isolate them should lead to development of a chemical method to measure this type of odor, in place of human panelists. Such basic information would also lead to developing control techniques to minimize this odor.

Several control techniques were evaluated for diesel exhaust odor. To date, the most effective method is an improved needle injector for use in the Detroit Diesel type E 6V-71 engine commonly used in buses.

Finally, public reaction to diesel-engine-exhaust odor has been measured. It has been found that a systematic relationship exists between increasing public objections and increasing diesel odor intensity.     

An overview of the latest development of microencapsulation for agricultural products

Abstract

For the production of controlled‐release agricultural formulations microencapsulation technologies are now the most used. Over the past two decades enormous progress has been made in order to develop the technologies which allow us to produce formulations tailor made to reach the target and fitting our toxicological requirements. This lecture is devoted to the definition of the criteria for selection of an active ingredient for microencapsulation and to a detailed review of the various techniques used today in commerçai microencapsulated formulations.

Resources are increasingly allocated into microencapsulation research & development by many agrochemical companies. Therefore the next 20 years should continue to yield innovative ideas including significant improvement of the physico‐chemical and toxicological properties of the actual formulations on the market. Some of this new ideas are applied by our company in order to modify or improve those properties playing the key role in the intent for targeted activity:

√ Recombination during production or upon storage.

New protective colloides

Dermal toxicity (LD 50) ‐ secondary protective colloides.

√ Release rate parameters.

Modification by the change of mobility of the active ingredient from the core (solvent or fluid type) affecting transit time and therefore LD 50 values.

√ Oral toxicity (LD 50).

Graft copolymers irreversibly adsorbed to the capsule surface.     

The water-soluble fraction of potentially toxic elements in contaminated soils: relationships between ecotoxicity, solubility and geochemical reactivity

To better understand the impacts posed by soil contamination to aquatic ecosystems it is crucial to characterise the links between ecotoxicity, chemical availability and geochemical reactivity of potentially toxic elements (PTE’s) in soils. We evaluated the adverse effects of water extracts obtained from soils contaminated by chemical industry and mining, using a test battery including organisms from different trophic levels (bacteria, algae and daphnids). These tests provided a quick assessment of the ecotoxicity of soils with respect to possible adverse effects on aquatic organisms although the ecotoxicological responses could be related to the solubility of PTE’s only to a limited extent.The analysis of results of bioassays together with the chemical characterisation of water extracts provided additional relevant insight into the role of conductivity, pH, Al, Fe, and Mn of soil extracts on toxicity to organisms. Furthermore, an important conclusion of this study was that the toxicity of extracts to the aquatic organisms could also be related to the soil properties (pH, Org C and Fe_ox) and to the reactivity of PTE’s in soils which in fact control the soluble fraction of the contaminants.The combined assessment of ecotoxicity in water fractions, solubility and geochemical reactivity of PTE’s in soils provided a more comprehensive understanding of the bioavailability of inorganic contaminants than ecotoxicological or chemical studies alone and can therefore be most useful for environmental risks assessment of contaminated soils.     

Detecting points as developmental delay based on the life-history development and urosome deformity of the harpacticoid copepod, Tigriopus japonicus sensu lato, following exposure to benzo(a)pyrene

To identify ecotoxicological responses to an endocrine disrupter, benzo(a)pyrene, we examined the life-history of the harpacticoid copepod, Tigriopus japonicus sensu lato. Based on the life-history of copepods, survival rate of nauplii (NSR) and copepodites (CSR), copepodite emergence day (CED) and adult male emergence day (AMED), sex ratio (MER), brooding success rate (BSR), and first brooding day of adult females (FBD) were measured. Significant differences were observed in the survival and development of nauplii (NSR and CED) and sex ratio (MER) of exposed and non-exposed copepods. Moreover, high concentration of BaP can be lethal to copepodite and exhibited a delay of growth. In this study, the CED and AMED among ecotoxicological response based on life-history developments were delayed and the body characteristics decreased in response to exposure to benzo(a)pyrene. The dwarfism and urosome deformity of the T. japonicus s.l. was exhibited in response to chemical exposure. Specifically, the body characteristics and biomass of dwarf copepods that had been exposed to benzo(a)pyrene were 30% and 50% lower than the control group, respectively. The incidence of abnormal urosomes was divided into two types. The first deformity type was signs of shrinkage in the middle of the urosome or the entire urosome was narrower than those of the control organisms. In the second type, the anal somite and the distal side of the urosome had abnormally swelled. Taken together, the nauplii and copepodid development of T. japonicus s.l. can be used as a useful biomaker for detecting developmental delay based on their entire life-history. In addition, the urosome deformity was used a good potential monitoring tool invading various chemicals and environmental contamination into water system.     

Evaluation of removal efficiency for acute toxicity and genotoxicity on zebrafish in anoxic–oxic process from selected municipal wastewater treatment plants

The anoxic–oxic (A/O) process has been extensively applied for simultaneous removal of organic contaminants and nitrogen in wastewater treatment. However, very little is known about its ability to remove toxic materials. Municipal wastewater contains various kinds of pollutants, some of which have recalcitrant genotoxicity and may cause potential threat to environment, and even can lead to extinction of many species. In this study, we have selected three municipal wastewater treatment plants (WWTPs) employing anoxic–oxic (A/O) process to evaluate their ability to remove acute toxicity and genotoxicity of wastewater. Mortality rate of zebrafish (Danio rerio) was used to evaluate acute toxicity, while micronucleus (MN) and comet assays were used to detect genotoxicity. Results showed that in this process the acute toxicity was completely removed as the treatment proceeded along with decrease in chemical oxygen demand (COD) (<50 mg L^?1) in the effluent. However, in these treatment processes the genotoxicity was not significantly reduced, but an increase in genotoxicity was observed. Both MN and comet assays showed similar results. The eliminated effluent may pose genotoxic threaten although its COD level has met the Chinese Sewage Discharge Standard. This study suggests that further treatment of the wastewater is required after the A/O process to remove the genotoxicity and minimize the ecotoxicological risk.     

Ex situ remediation of contaminated sediments using mineral additives: assessment of pollutant bioavailability with the Microtox solid phase test

The aim of this work is to assess the potential ecotoxicological effects of contaminated sediments treated with mineral additives. The Microtox solid phase test was used to evaluate the effect of mineral additives on the toxicity of sediment suspensions. Four Mediterranean port sediments were studied after dredging and bioremediation: Sample A from navy harbor, sample B from commercial port and samples C and D from pleasure ports. Sediment samples were stabilized with three mineral additives: hematite, zero-valent iron and zeolite. Results show that all studied mineral additives can act as stabilizer agent in highly contaminated sediments (A and C) by decreasing dissolved metal concentrations and sediment toxicity level. On the contrary, for the less contaminated samples (B and D) hematite and zeolite can provoke toxic effect towards Vibrio fischeri since additive particles can favor bacteria retention and decrease bioluminescence emission.     

Leachates from solid wastes: chemical and eco(geno)toxicological differences between leachates obtained from fresh and stabilized industrial organic sludge

The chemical and ecotoxicological characteristics of fresh and stabilized industrial organic sludge leachates were compared to obtain information regarding how the stabilization process can influence the ecotoxic potential of this industrial waste, which could be used for the amendment of degraded soil. Physicochemical analysis of the sludge leachates, as well as a battery of eco(geno)toxicity tests on bacteria, algae, daphnids, and higher plants (including Vicia faba genotoxicity test) and the determination of hydrolytic enzyme activity, was performed according to standard methods. The chemical comparison of the two types of leachate showed that the samples obtained from stabilized sludge had a lower organic content and higher metal content than leachates of the fresh sludge. The eco(geno)toxicological results obtained with aquatic organisms showed that the stabilized sludge leachate was more toxic than the fresh sludge leachate, both originating from the same industrial organic sludge sample. Nevertheless, phytotoxicity tests carried out with a reference peat soil irrigated with stabilized sludge leachate showed the same toxicity as the fresh sludge leachate. In the case of the industrial solid organic sludge studied, stabilization through a biodegradation process promoted a higher metal mobility/bioavailability/eco(geno)toxicity in the stabilized sludge leachate compared to the fresh sludge leachate.     

Evaluation of surface water quality using an ecotoxicological approach: a case study of the Alqueva Reservoir (Portugal)

Background, aim, and scope  

Freshwater reservoirs can be impacted by several hazardous substances through inputs from agricultural activity, sewage discharges, and groundwater leaching and runoff. The water quality assessment is very important for implementation of the monitoring and remediation programs to minimize the risk promoted by hazardous substances in aquatic ecosystems. Evaluation of the degree of contamination of aquatic environments must not take in account only its chemical characterization but it must be complemented with biological assays, which determine potential toxic effects and allows an integrated evaluation of its effects in populations and aquatic ecosystem communities. The application of this type of strategy has clear advantages allowing a general evaluation of the effects from all the water components, including those due to unknown substances and synergic, antagonistic, or additive effects. There are only a few studies that reported ecotoxicological acute end points, for the assessment of surface water quality, and the relationship among toxicity results and the anthropogenic pollution sources and the seasonal period. The aim of this study was to assess the ecotoxicological characterization of the surface water from Alqueva reservoir (South of Portugal) and to evaluate the influence of anthropogenic sources of pollution and their seasonal variation in its toxicity. The construction of Alqueva reservoir was recently finished (2002) and, to our knowledge, an ecotoxicological assessment of its surface water has not been performed. Because of that, no information is available on the possible impact of pollutants on the biota. The surface water toxicity was assessed using acute and chronic bioassays. The results are to be used for developing a monitoring program, including biological methods.     

Review of Recent Ecotoxicological Studies on Cladocerans

Cladocerans have been widely used as the bioassay organisms in evaluating the impact of different toxic substances. Literature survey during the last 10 years revealed that cladoceran ecotoxicological research has been in an exponential phase constituting nearly 10% of publications on this group. Many studies have considered typically planktonic taxa such as Daphnia magna, D. pulex, Moina macrocopa, M. micrura and Ceriodaphania dubia. Experimental data on toxicity tests, to a lesser extent, are also available for littoral-benthic genera such as Simocephalus, Macrothrix and Alona. Most toxicity tests are limited to the derivation of median lethal concentrations of various durations but mostly at 24 or 48 h. Studies related to the evaluation of changes in the life history variables of cladocerans as a result of sublethal exposure to toxic substances are not many, but gaining importance. The common toxic substances used in the cladoceran toxicity tests appear to be heavy metals, pesticides and a few natural toxins such as cyanotoxins. We review here the effect of different toxic substances on cladocerans based on both the field and the laboratory studies from an ecotoxicology point of view. Suggestions for the future cladoceran ecotoxicology are also commented on.     

Application of the criteria for classification of existing chemicals as dangerous for the environment

The criteria for classification and labelling of substances as “dangerous for the environment” agreed upon within the European Union (EU) were applied to two sets of existing chemicals. One set (sample A) consisted of 41 randomly selected compounds listed in the European Inventory of Existing Chemical Substances (EINECS). The other set (sample B) comprised 115 substances listed in Annex I of Directive 67/548/EEC which were classified by the EU Working Group on Classification and Labelling of Existing Chemicals. The aquatic toxicity (fish mortality,Daphnia immobilisation, algal growth inhibition), ready biodegradability and n-octanol/water partition coefficient were measured for sample A by one and the same laboratory. For sample B, the available ecotoxicological data originated from many different sources and therefore was rather heterogeneous. In both samples, algal toxicity was the most sensitive effect parameter for most substances. Furthermore, it was found that, classification based on a single aquatic test result differs in many cases from classification based on a complete data set, although a correlation exists between the biological end-points of the aquatic toxicity test systems.     

C60 fullerene: a powerful antioxidant or a damaging agent? The importance of an in-depth material characterization prior to toxicity assays

Since the discovery of fullerenes in 1985, these carbon nanospheres have attracted attention regarding their physico/chemical properties. Despite little knowledge about their impact on the environment and human health, the production of fullerenes has already reached an industrial scale. However, the toxicity of C₆₀ is still controversially discussed.The aim of this study was to clarify the biological effects of tetrahydrofuran (THF) suspended C₆₀ fullerene in comparison to water stirred C₆₀ fullerene suspensions. Beyond that, we analyzed the effects on the Crustacea Daphnia magna an indicator for ecotoxicological effects and the human lung epithelial cell line A549 as a simplified model for the respiratory tract.We could demonstrate that water-soluble side products which were formed in THF nC₆₀ suspension were responsible for the observed acute toxic effects, whereas fullerenes themselves had no negative effect regardless of the preparative route on either A549 cell in vitro or D. magna in vivo.     

Ecotoxicological evaluation of industrial port of Venice (Italy) sediment samples after a decontamination treatment

This work assesses the ecotoxicological effects of polluted sediment after a decontamination treatment process using a new sediment washing technique. Sediment samples were collected from four sites in Marghera Port industrial channels (Venice, Italy). Ecotoxicological evaluations were performed with Vibrio fischeri and Crassostrea gigas bioassays. Whole sediment and elutriate were deemed as the most suitable environmental matrices for this study. Toxicity scores developed in the Lagoon of Venice for V. fischeri on whole sediment and for C. gigas on elutriate were considered for the final ranking of samples. Ecotoxicological results showed that the treated sediment samples presented both acute and sub-chronic toxicities, which were mainly attributed to the presence of some remaining chemicals such as metals and polyaromatic hydrocarbons. The acute toxicity ranged from low to medium, while the sub-chronic one from absent to very high, suggesting that treated sediments could not be reused in direct contact with seawater.