The SITE Demonstration of the Shirco Electric Infrared Incinerator

A test program for the Shirco infrared destruction process is described in this article. This incineration process is transportable and can be an effective method for cleanup of soils from Superfund sites. A pilot-scale unit and a 100-ton per day transportable unit were tested as part of the Superfund Technology Evaluation (SITE) program.

The process consists of a thermal destruction chamber where electricity is used for infrared rods that heat the waste, and a second chamber where propane is used to destroy any remaining hydrocarbons in the exhaust from the first chamber. A venturi scrubber and horizontal packed tower were used for particulate removal before exhausting the gas to the atmosphere. The feed material was reduced to less than one inch in diameter before it was processed by the unit.

The testing indicated that the Shirco system would remove and destroy organics from a waste, but would not remove heavy metals. The scrubber on the full scale system was of marginal capacity for that particular application and did not meet the RCRA specifications of 180 mg/dscm during two of the four tests made for the full scale unit.

Both units achieved Destruction and Removal Efficiencies (DRE) in excess of the 99.99 percent required for RCRA applications. Performance with respect to the TSCA requirement of 99.9999 percent for PCBs could not be ascertained due to the concentration of PCB in the feed.     

Development of Cleanup Standards at Superfund Sites: An Evaluation of Consistency

The Washington Department of Ecology (WDOE) recently developed a regulatory program for determining cleanup standards at hazardous waste sites. One of WDOE's first tasks in the development of a cleanup standards program was to evaluate how standards have been developed and implemented under Superfund.

The evaluation of cleanup standards revealed: (1) a great deal of variation among sites, both in the magnitude of the standards set for some contaminants and the basis on which they were set, and (2) that there is no consistent decision-making approach for determining how standards should be set. This lack of consistency and guidance has the potential to result in overly stringent or underprotective cleanup requirements and inefficient standard development.

Washington State has adopted an approach that allows for implementing uniform numerical cleanup standards at relatively straightforward sites and provides a process for establishing site-specific cleanup levels at more complex sites. This approach is expected to facilitate development of standards that offer appropriate human health and ecological protection while minimizing private and public sector site management and cleanup costs.     

An Ex Post Cost-Benefit Analysis of the Nitrogen Dioxide Air Pollution Control Program in Tokyo

ABSTRACT

The benefits and costs of past nitrogen dioxide (NO₂) control policies were calculated for Tokyo, Japan, using environmental, economic, political, demographic, and medical data from 1973 to 1994. The benefits of NO₂ control were estimated as medical expenses and lost work time due to hypothetical no-control air concentrations of NO₂. Direct costs were calculated as annualized capital expenditures and 1 year's operating costs for regulated industries plus governmental agency expenses. The major findings were as follows:

(1) Using Tokyo's average medical cost of pollution-related illness, the best net estimate of the avoided medical costs due to incidence of phlegm and sputum in adults was 730 billion yen ($6.08 billion; 1 U.S. dollar = 120 yen).

(2) The best net estimate of the avoided medical costs due to incidence of lower respiratory illness in children was 93 billion yen ($775 million).

(3) Using Tokyo's average duration of pollution-related illness and average wages, the best net estimate of the avoided costs of lost wages in workers was 760 billion yen ($6.33 billion).

(4) The best net estimate of the avoided costs of lost wages in mothers caring for their sick children was 100 billion yen ($833 million).

(5) Using Tokyo-specific data, the best net costs were estimated as 280 billion yen ($2.33 billion).

(6) Using human health and productivity benefits, and annualized capital cost and operating cost estimates, the best net benefits-to-costs ratio was 6:1 (upper limit 44:1; lower limit 0.3:1). Benefit calculations were sensitive to assumptions of mobile source emissions and certain health impacts that were not included. Cost calculations were highly dependent on assumptions of flue gas volume and fuel use. For comparative purposes, we identified other studies for air pollution-related illness. Assumptions that formed the basis for most of the inputs in the present study, such as duration of illness, medical treatment costs, per person illness in children, and lost wages for working mothers, were similar to those recommended in the literature. Lost wages in sick workers and per capita illness incidence in adults were higher than numbers reported elsewhere. Further advances in cost-benefit analysis (CBA) procedures to evaluate the economic effectiveness of NO₂ controls in Tokyo are recommended to estimate impacts and values for additional human health benefits, ecosystem health and productivity effects, and nonliving system effects, as well as benefits of ancillary reductions in other pollutants. The present study suggests that Tokyo's past NO₂ control policies in total were economically quite effective.     

Treatment of Nonhazardous Petroleum-Contaminated Soils by Thermal Desorption Technologies

Spills, leaks, and accidental discharges of petroleum products have contaminated soil at thousands of sites in the United States. One remedial action technique for treating petroleum contaminated soil is the use of thermal desorption technologies.

This paper describes key elements of the U.S. Environmental Protection Agency report titled “Thermal Desorption Applications Manual for Treating Nonhazardous Petroleum Contaminated Soils.”¹ The applications manual describes the types, mechanical and operating characteristics of thermal desorption technologies that are commercially available to treat petroleum-contaminated soils. It also provides step-by-step procedures to rate the critical success factors influencing the general applicability of thermal desorption at a particular site. These factors include site, waste and soil characteristics, regulatory requirements, and process equipment design and operating characteristics. Procedures are provided to determine the types of thermal desorption systems that are most technically suitable for a given application and to determine whether on-site or off-site treatment is likely to be the most cost-effective alternative. Key factors that determine process economics are identified, and estimated cost ranges for treating petroleum-contaminated soils are presented. Spreadsheets are provided that can be used for performing cost analyses for specific applications.

The aforementioned report is applicable only to the treatment of petroleum-contaminated soils that are exempt from being classified as hazardous wastes under the Resource Conservation and Recovery Act (RCRA) or as toxic materials under the Toxic Substances Control Act (TSCA). Although much of the technical discussion in this paper is applicable to the treatment of both nonhazardous and hazardous ortoxic materials, permitting requirements and treatment costs are significantly different forthe individual categories of waste materials.     

The benefits of lower ozone due to air pollution emission reductions (2002–2011) in the Eastern United States during extreme heat

ABSTRACT

Using the Community Multiscale Air Quality (CMAQ) model and the Benefits Mapping and Analysis Program – Community Edition (BenMAP-CE) tool, we estimate the benefits of anthropogenic emission reductions between 2002 and 2011 in the Eastern United States (US) with respect to surface ozone concentrations and ozone-related health and economic impacts, during a month of extreme heat, July 2011. Based on CMAQ simulations using emissions appropriate for 2002 and 2011, we estimate that emission reductions since 2002 likely prevented 10– 15 ozone exceedance days (using the 2011 maximum 8-hr average ozone standard of 75 ppbv) throughout the Ohio River Valley and 5– 10 ozone exceedance days throughout the Washington, DC – Baltimore, MD metropolitan area during this extremely hot month. CMAQ results were fed into the BenMAP-CE tool to determine the health and health-related economic benefits of anthropogenic emission reductions between 2002 and 2011. We estimate that the concomitant health benefits from the ozone reductions were significant for this anomalous month: 160–800 mortalities (95% confidence interval (CI): 70–1,010) were avoided in July 2011 in the Eastern U.S, saving an estimated $1.3–$6.6 billion (CI: $174 million–$15.5 billion). Additionally, we estimate that emission reductions resulted in 950 (CI: 90–2,350) less hospital admissions from respiratory symptoms, 370 (CI: 180–580) less hospital admissions for pneumonia, 570 (CI: 0–1650) less Emergency Room (ER) visits from asthma symptoms, 922,020 (CI: 469,960–1,370,050) less minor restricted activity days (MRADs), and 430,240 (CI: ?280,350–963,190) less symptoms of asthma exacerbation during July 2011.

Implications: We estimate the benefits of air pollution emission reductions on surface ozone concentrations and ozone-related impacts on human health and the economy between 2002 and 2011 during an extremely hot month, July 2011, in the eastern United States (US) using the CMAQ and BenMAP-CE models. Results suggest that, during July 2011, emission reductions prevented 10-15 ozone exceedance days in the Ohio River Valley and 5-10 ozone exceedance days in the Mid Atlantic; saved 160-800 lives in the Eastern US, saving $1.3 - $6.5 billion; and resulted in 950 less hospital admissions for respiratory symptoms, 370 less hospital admissions for pneumonia, 570 less Emergency Room visits for asthma symptoms, 922,020 less minor restricted activity days, and 430,240 less symptoms of asthma exacerbation.     

Protecting Off-Site Populations and Site Workers from Vapor Discharges during Shallow Soil Mixing at the North Carolina State University National Priorities List Site

Abstract

Although vapor monitoring is generally a component of remedial action activities, most sites do not have routine gaseous releases or vapor clouds erupting from the soil during implementation of the cleanup process (or during cleanup of the site). At the North Carolina State University Lot 86 National Priorities List Site, over 8410 m³ (11,000 yd³) of chemical waste was disposed at the Site, including organic solvents and shock-sensitive and airand water-reactive compounds. During the Remedial Action, it was imperative to protect site workers and off-site populations from potential inhalation exposures. Engineering controls were incorporated into the shallow soil mixing process to limit the release of gaseous compounds. To quantify potential exposures to on-site and off-site receptors, modeling was conducted to evaluate potential exposure routes and migration pathways. To demonstrate acceptable levels of airborne constituents, a multifaceted air sampling and monitoring program was implemented. To ensure that potential exposures could be quantified, passive dosimeters, continuous real-time monitoring, time-weighted whole air sampling, and grab samples of vapor clouds were all critical components of the air monitoring program. After the successful completion of the Remedial Action, the pre-Resource Conservation and Recovery Act (RCRA) chemical waste generated from the University’s educational and research laboratories was entirely encapsulated and neither on-site workers nor off-site populations were exposed to analyzed compounds above any health-based action level (i.e., 15-min short-term exposure limit [STEL], 8-hr threshold limit value, or time-weighted average permissible exposure limit)     

Some Heavy-Metal Pollutants in the Air of Naples

ABSTRACT

In this paper, assumptions regarding future land use as a key uncertainty is considered and its impact on risk analysis for contaminated sites is assessed. Risks are assessed for two land use scenarios (current-use industrial and future-use residential) using probabilistic models that incorporate uncertainty and variability in the exposure parameters. Residual risks are calculated for both industrial and residential cleanup standards. A Superfund site in northern California is considered.

In general, for the unremediated case, the future-use residential scenarios produce larger risks (1 to 3 orders of magnitude) than current- (continued) use industrial scenarios. For the Superfund site studied, the residual risks calculated for the remedy selected was not sufficiently protective of future-use residents in that it did not meet .S. Environmental Protection Agency (EPA) risk goals, but was protective of current-use workers, even though the cleanup criteria were based on residential use. Alternative risk management practices, such as deed restrictions, can be used in such cases.     

Economic Benefits of Improvements in Visibility: Acid Rain Provisions of the 1990 Clean Air Act Amendments

The Acid Rain Provisions (Title IV) of the Clean Air Act Amendments of 1990 call for about a 10 million ton reduction in annual SO₂ emissions in the United States. Although the provisions apply nationwide, most of the reduction will occur in the eastern half of the country, where use of high-sulfur coal for electricity generation is most common. One potentially large benefit of Title IV is the expected improvement in visibility conditions in the eastern United States due to the reductions in secondary sul-fate aerosols. This paper combines available economic estimates of willingness to pay for improvements in visibility with current estimates of the difference between expected visibility conditions in the eastern United States with and without Title I V, to estimate the expected visibility benefits of Title IV. The results suggest an annual value of $2.3 billion (in 1994 dollars) in the year 2010, as a result of visibility improvements due to Title IV in residential areas of the eastern United States. The results also suggest a possible additional annual value for eastern U.S. residents of as much as $1-2 billion for visibility improvements at national parks in the Southeast.     

Biogenic Sulfur Gas Emissions from Soils in Eastern and Southeastern United States

Data are presented for the first systematic measurements of biogenic sulfur gas flux from the major soil orders within the eastern and southeastern United States. Sulfur flux samples were collected and analyzed on-site during the fall of 1977, spring and summer of 1978 and summer of 1979. A total of 27 sampling locales in 17 states were examined. Eight additional sites were visited in 1980.

At some locales, two to four soils were examined, providing an even broader sampling of the soil orders. Three of the locales were revisited two or three times during the course of the study to establish the influence of seasonal climatology upon the measured emission rates and chemical composition of the sulfur flux mixtures.

The sulfur gas enhancement of sulfur-free sweep air passing through dynamic emission flux chambers placed over selected sampling areas was determined by combined cryogenic enrichment sampling and wall-coated, open tubular, capillary column, cryogenic gas chromatography (WCOT/GC) using a sulfur selective, flame photometric detector (FPD).

Sulfur gas mixtures varied with soil order, ambient temperature, insolation, soil moisture, cultivation, and vegetative cover. Statistical analyses indicated strong temperature and soil order relationships for sulfur emissions from soils.

Fluxes ranged from 0.001 g to 1940 g of total sulfur as S/m²/yr. The calculated mean annual sulfur flux, weighted by soil order, was 0.03 g S/m²/yr for the study land area, or 110,872 metric tons (mT). The estimated annual average sulfur flux increased from 65 mT per 6400 km² for the land grids in the northernmost east-west grid tier to an average 1800 mT for the land grids in the southern Florida grid tiers.

This systematic sampling of major soils provides a much broader data base for estimating biogenic sulfur flux than previously reported for isolated intertidal sites, and presents the first sulfur flux estimates for inland soils which make up approximately 93% of the land of the eastern United States.     

EPA SITE Demonstration of the International Waste Technologies/Geo-Con In Situ Stabilization/Solidification Process

This paper presents an EPA evaluation of the first field demonstration of an in situ stabilization/solidification process for contaminated soil under the EPA Superfund Innovative Technology Evaluation (SITE) program. Demonstration of this process was a joint effort of two vendors: ? International Waste Technologies (IWT) of Wichita, Kansas, who provided the treatment process, specifically the proprietary additive called HWT-20, and

? Geo-Con, Inc., of Pittsburgh, Pennsylvania, who provided both engineering and hardware for the in situ soil treatment.

The field demonstration took place in April, 1988 at a site in Hialeah, Florida, contaminated mainly with polychlorinated biphenyls (PCBs). EPA tested the soil before and after treatment and the EPA evaluation of this process is based on results from this testing. A year later, in April 1989, EPA tested again the treated soil and results of that testing were compared to those of the demonstration. Results of the EPA evaluation of the IWT process, the Geo-Con performance, and treatment costs are discussed separately.     

Supply Curves for Using Powder River Basin Coal to Reduce Sulfur Emissions

Abstract

Supply curves were prepared for coal-fired power plants in the contiguous United States switching to Wyoming's Powder River Basin (PRB) low-sulfur coal. Up to 625 plants, representing ～44% of the nameplate capacity of all coal-fired plants, could switch. If all switched, more than $8.8 billion additional capital would be required and the cost of electricity would increase by up to $5.9 billion per year, depending on levels of plant derating. Coal switching would result in sulfur dioxide (SO₂) emissions reduction of 4.5 million t/yr. Increase in cost of electricity would be in the range of 0.31-0.73 cents per kilowatt-hour. Average cost of S emissions reduction could be as high as $1298 per t of SO₂. Up to 367 plants, or 59% of selected plants with 32% of 44% nameplate capacity, could have marginal cost in excess of $1000 per t of SO₂. Up to 73 plants would appear to benefit from both a lowering of the annual cost and a lowering of SO₂ emissions by switching to the PRB coal.     

Establishing and Evaluating the Risk Implications of Uniform Soil Remediation Goals

Abstract

There is growing interest in the establishment of uniform, concentration-based soil remediation goals to accelerate the cleanup of contaminated sites and to provide consistency in the extent of cleanup required for similar sites. If uniform goals are used in a region, post-remediation risk will vary across sites due to regional variability in site properties. Thus far, of the national and state agencies that have established or proposed uniform concentration guidelines, none have quantified the regional variability in risk that is likely to result with their use as remediation goals.

This paper describes a methodology for evaluating regional cancer risk variability resulting from use of uniform, concentration-based soil remediation goals, presents an example application of the methodology, and examines its utility for establishing uniform goals for organic contaminants in soil. The methodology is based on the integrated transport, fate, exposure, and risk model SoilRisk. Also addressed is the issue of contaminants for which regional risk variability is expected to be large with use of uniform soil remediation goals. An approach is described for reducing such variability by development of alternative uniform contaminant concentration levels for categories of sites differentiated by site geographic location or physical-chemical properties.     

An ex post cost-benefit analysis of the nitrogen dioxide air pollution control program in Tokyo

The benefits and costs of past nitrogen dioxide (NO2) control policies were calculated for Tokyo, Japan, using environmental, economic, political, demographic, and medical data from 1973 to 1994. The benefits of NO2 control were estimated as medical expenses and lost work time due to hypothetical no-control air concentrations of NO2. Direct costs were calculated as annualized capital expenditures and 1 year's operating costs for regulated industries plus governmental agency expenses. The major findings were as follows: (1) Using Tokyo's average medical cost of pollution-related illness, the best net estimate of the avoided medical costs due to incidence of phlegm and sputum in adults was 730 billion yen ($6.08 billion; 1 U.S. dollar = 120 yen). (2) The best net estimate of the avoided medical costs due to incidence of lower respiratory illness in children was 93 billion yen ($775 million). (3) Using Tokyo's average duration of pollution-related illness and average wages, the best net estimate of the avoided costs of lost wages in workers was 760 billion yen ($6.33 billion). (4) The best net estimate of the avoided costs of lost wages in mothers caring for their sick children was 100 billion yen ($833 million). (5) Using Tokyo-specific data, the best net costs were estimated as 280 billion yen ($2.33 billion). (6) Using human health and productivity benefits, and annualized capital cost and operating cost estimates, the best net benefits-to-costs ratio was 6:1 (upper limit 44:1; lower limit 0.3:1). Benefit calculations were sensitive to assumptions of mobile source emissions and certain health impacts that were not included. Cost calculations were highly dependent on assumptions of flue gas volume and fuel use. For comparative purposes, we identified other studies for air pollution-related illness. Assumptions that formed the basis for most of the inputs in the present study, such as duration of illness, medical treatment costs, per person illness in children, and lost wages for working mothers, were similar to those recommended in the literature. Lost wages in sick workers and per capita illness incidence in adults were higher than numbers reported elsewhere. Further advances in cost-benefit analysis (CBA) procedures to evaluate the economic effectiveness of NO2 controls in Tokyo are recommended to estimate impacts and values for additional human health benefits, ecosystem health and productivity effects, and nonliving system effects, as well as benefits of ancillary reductions in other pollutants. The present study suggests that Tokyo's past NO2 control policies in total were economically quite effective.     

Update on Building and Structure Decontamination

Cleanup of the nation’s hazardous waste sites is a top environmental priority. Since the ultimate objective of many cleanup programs is to return the contaminated site and buildings on the site to active use, additional information regarding both established and emerging technologies for building decontamination is needed.

A pilot scale study was performed at an actual Superfund Site to evaluate, side by side, the efficacy of PCB removal using two decontamination processes. One process entails use of a shotblasting technique in which contaminated concrete surfaces are cut away and physically removed. The other process involves application of an alkali metal/polyethylene glycolate mixture directly to contaminated concrete surfaces for insitu degradation of PCBs.     

Development and Demonstration of a Pilot-Scale Debris Washing System

Metallic, masonry, and other solid debris that may be contaminated with hazardous chemicals litter numerous hazardous waste sites in the United States. Polychlorinated biphenyls (PCBs), pesticides, lead or other metals are some of the contaminants of concern. In some cases, cleanup standards have been established (e.g., 10 μg PCBs/100 cm² for surfaces to which humans may be frequently exposed). Decontaminated debris could be either returned to the site as “clean” fill or, in the case of metallic debris, sold to a metal smelter.

This project involves the development and demonstration of a technology specifically for per forming on-site decontamination of debris. Both bench-scale and pilot-scale versions of a debris washing system (DWS) have been designed, constructed, and demonstrated. The DWS entails the application of an aqueous solution during a high-pressure spray cycle, followed by turbulent wash and rinse cycles. The aqueous cleaning solution is recovered and reconditioned for reuse concurrently with the debris-cleaning process, which minimizes the quantity of process water required to clean the debris.     

Alternating Current Electrocoagulation for Superfund Site Remediation

Abstract

The Superfund Innovative Technology Evaluation (SITE) Emerging Technology (ET) Program, authorized under the Superfund Amendments and Reauthorization Act (SARA) of 1986, implements the goal of the SITE Program to promote, accelerate the development of, and make commercially available alternative innovative treatment technologies for use at Superfund sites.

Under this program, the technical and economical feasibility of alternating current electrocoagulation (ACE) developed by Electro-Pure Systems, Inc., was evaluated for a two-year period. ACE is an electrochemical technology where highly-charged aluminum polyhydroxide species are introduced into aqueous media for the removal of suspended solids, oil droplets and soluble ionic pollutants. ACE can break stable aqueous colloidal suspensions of up to 10 percent total solids and stable emulsions containing up to 5 percent oil.

Major operating parameters have been defined for different classes of effluents based on experimental results using complex synthetic soil slurries and metals. Test results indicate that ACE produces aqueous and solid separations comparable to those produced by chemical flocculent additions, but with reduced filtration times and sludge volumes. The technology has application where removal of soluble and suspended pollutants from effluents is required, and in the recovery of fine-grained products from process streams. The technology, however, has not yet been demonstrated at full-scale for Superfund site remediation. The principal results of the SITE research program, and results of ACE treatment on some different classes of industrial effluents not part of the SITE Program, are summarized.     

NCAQ Report to Congress: Review and Response

Airborne measurements of gaseous and particulate sulfur and nitrogen pollutants were made in southwestern Kentucky on the afternoon of October 21, 1979. Back-trajectory analysis indicates that the sampled air parcel moved over northern Florida, Alabama, and western Tennessee during the two days prior to sampling. Before moving over Florida, the air parcel was over the Atlantic Ocean for at least five days. Analytical long-range transport (LRT) model predictions based on anthropogenic emissions account for only about 75% of the airborne measured concentrations of 14.7 μg m^?3 for SO₂ and 4.8 μg m^?3 for SO₄ ^2?. The remaining 25 % is thought to be due to biogenic sulfur emissions from the extensive wetland areas along the Gulf Coast.

Forward-trajectory analysis indicates that the air parcel moved to the Adirondack Mountains of New York State 24 hours after sampling. Model predictions indicate that SO₂ and SO₄ ^2? mean layer concentrations at the Adirondacks were 24 and 16 μg^?3, respectively. Almost half of this sulfur was estimated to come from emissions in the heavily industrialized region along the Ohio River Valley.

Further comparisons used a measurement data base obtained in southeastern Canada and the state of Arkansas during August 1976. An air parcel was tracked for seven days as it entered the north central United States, stagnated over the lower midwest, and then moved to eastern Canada. Model predictions were in substantial agreement with regional SO₄ ^2? concentrations measured at a number of ground-level sites. Average SO₄ ^2? concentrations measured in central Arkansas on August 10, 1976 were 20 μ m^?3 vs. a modeled value of 19 μ m^?3. Average SO₄ ^2? concentrations measured in Nova Scotia four days later were 22 μg^?3 vs. a modeled estimate of 24 μg^?3.     

Fluoride Emissions and Forest Growth

Abstract

The October 1995 court decision allowing Ethyl Corporation to offer methylcyclopentadienyl manganese tricarbonyl (MMT) for sale to refiners for introduction into unleaded gasoline as an octane enhancer is likely to result in increased fine (PM_2.5) manganese (Mn) concentrations in ambient air. Concern exists regarding possible health effects. In this paper, recent fine Mn concentrations in three monitoring networks and one U.S. Environmental Protection Agency (EPA) study of personal exposure are analyzed. One network consists mainly of rural sites in national parks in the United States, a second consists mainly of urban sites in California, and the third consists mainly of urban sites in Canada where MMT has been used for a number of years. During the late 1980s and early 1990s, mean ambient concentrations ranged from 1 ng/m³ in the mostly rural network to 3 ng/m³ in the mostly urban California network to 12 ng/m³ in the MMT-impacted Canadian network. Several lines of evidence suggested that some of the fine Mn observed in the United States during the 1986-1992 period was contributed by automobiles using leaded gasoline, for which MMT was a registered fuel additive. However, the near-disappearance of leaded gasoline has resulted in a very small portion of fine Mn being attributed to automobiles in the years since 1992.A source apportionment analysis suggested that crustal contributions to ambient fine Mn are on the order of 1-2 ng/m³ in both the United States and Canada.     

Receptor Modeling for Elemental Source Contributions to Fine Aerosols in New York State

ABSTRACT

Fine atmospheric particulate material was collected at five sites in upstate New York and analyzed for its trace element composition by instrumental neutron activation analysis. Of the 3700 daily samples collected over a 2-yr period, 1459 were analyzed for 39 elements, providing a large and detailed data set. Factor analysis (FA) was used to identify potential pollution sources or source regions and to construct inorganic source profiles for each. Following FA, the method of absolute factor scores-multiple linear regression was used to estimate the absolute elemental contribution of each of the identified sources. Factor analysis identified nine sources impacting the sampling region. Seven of these were found to be present in varying degrees among of the sampling sites. The other two sources had more localized impacts and were observed at only one of the sites each. Regional sources (such as the midwestern United States and eastern Canada) and crustal/ soil material accounted for the greatest amount of the trace elements measured in the collected material.     

Refinery Sludge Treatment/Hazardous Waste Minimization Via Dehydration and Solvent Extraction

Abstract

The patented Carver-Greenfield (C-G) Process®, a combination of dehydration and solvent extraction treatment technologies, has a wide range of uses in separating hydrocarbon solvent-soluble hazardous organic contaminants (indigenous oil) from sludges, soils, and industrial wastes. As a result of this treatment, the products from a C-G Process facility are: ? Clean, dry solids which are typically suitable for disposal in nonhazardous landfills;

? Water which is treatable in an industrial or Publicly Owned Treatment Works (POTW) wastewater treatment facility;

? Extracted indigenous oil containing hydrocarbon soluble contaminants which may be recycled or reused or disposed of at less cost because its volume is smaller than the original waste feed.

The C-G Process was demonstrated on spent oily drilling fluids as part of the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation (SITE) Program. This paper summarizes the use of the C-G Process for economical treatment and minimization of hazardous refinery wastes, reviews the SITE program results, and describes extending the C-G Process technology to treatment of other wastes. Estimated treatment costs are presented.