Air Quality Technical Information Exchange To the People’s Republic of China

Editor’s note: Donald F. Adams was Past President of the Air Pollution Control Association in 1983 when he led a delegation of air quality experts to the People’s Republic of China for a technical information exchange. Professor Adams has provided an informative (and humorous) report of this technical exchange and we are pleased to share it with the readers of JAPCA.     

Plan and Schedule for NAPAP’s 1989 and 1990 Assessment Reports

On the following pages is an excerpt from the Overview and Summary (Part 1) of the recently published 300-page National Acid Precipitation Assessment Program (NAPAP) document* that describes the planned activities of the Program for the next two years. This document has been made available for public review and an open meeting was held on November 17 in Washington, D.C. to receive comments on it. The Plan will be revised following consideration of these comments and published in January 1989.     

Site Sampling and Treatability Studies for Demonstration of WasteChem’s Asphalt Encapsulation Technology Under EPA’s SITE Program

ABSTRACT

Exposures from indoor environments are a major issue for evaluating total long-term personal exposures to the fine fraction (<2.5μm in aerodynamic diameter) of particulate matter (PM). It is widely accepted in the indoor air quality (IAQ) research community that biocontamination is one of the important indoor air pollutants. Major indoor air biocontaminants include mold, bacteria, dust mites, and other antigens. Once the biocontaminants or their metabolites become airborne, IAQ could be significantly deteriorated. The airborne biocontaminants or their metabolites can induce irritational, allergic, infectious, and chemical responses in exposed individuals.

Biocontaminants, such as some mold spores or pollen grains, because of their size and mass, settle rapidly within the indoor environment. Over time they may become nonviable and fragmented by the process of desiccation. Desiccated nonviable fragments of organisms are common and can be toxic or allergenic, depending upon the specific organism or organism component. Once these smaller and lighter fragments of biological PM become suspended in air, they have a greater tendency to stay suspended. Although some bioaerosols have been identified, few have been quantitatively studied for their prevalence within the total indoor PM with time, or for their affinity to penetrate indoors.

This paper describes a preliminary research effort to develop a methodology for the measurement of nonvi-able biologically based PM, analyzing for mold and ragweed antigens and endotoxins. The research objectives include the development of a set of analytical methods and the comparison of impactor media and sample size, and the quantification of the relationship between outdoor and indoor levels of bioaerosols. Indoor and outdoor air samples were passed through an Andersen nonviable cascade impactor in which particles from 0.2 to 9.0 um were collected and analyzed. The presence of mold, ragweed, and endotoxin was found in all eight size ranges. The presence of respirable particles of mold and pollen found in the fine particle size range from 0.2 to 5.25 um is evidence of fragmentation of larger source particles that are known allergens.     

EPA’s LIMB Development and Demonstration Program

This paper describes and discusses key design features of the retrofit of EPA’s Limestone Injection Multistage Burner (LIMB) system to an operating, wall-fired utility boiler at Ohio Edison’s Edgewater Station, based on the preliminary engineering design. It further describes results of pertinent projects in EPA's LIMB program and shows how these results were used as the basis for the design of the system. The full-scale demonstration is expected to prove the effectiveness and cost of the LIMB concept for use on large-scale utility boilers. To date, a preliminary engineering design for the Edgewater unit has been prepared incorporating the technology developed in smaller-scale studies. The schedule calls for system start-up by March 1987. EPA is engaged in a multiyear program to develop an improved control technology for emission of sulfur and nitrogen oxides from the combustion of fossil fuels. The technology involves staged-flow coal burners and injection of a reactive sorbeht into the furnace to reduce emissions. The program includes fundamental studies of reaction chemistry and kinetics, bench and pilot scale experimental studies, a full-scale demonstration, and economic and applicability studies. It is structured to establish a basis for future public sector commercialization, as well as help in understanding the technology’s controlling factors.     

A Technical Amplification of NAPAP’s Findings

In September 1987, NAPAP released a 4-volume, 925 page interim report that summarized the effects of acidic precipitation on crops, forests, aquatic ecosystems, visibility, and human health. Following the release of the report, APCA coordinated an international conference to provide a forum for the technical amplification of the conclusions reached in NAPAP's report. Scientists from the United States and Canada were invited to participate in the conference. The focus of the meeting was concerned only with the technical aspects of the NAPAP report. At the conference, there were important research concepts presented that may require further attention before definitive, bottom line statements can be made concerning the effects of acid precipitation on the environment. The purpose of this paper is to summarize the key technical points made at the conference and provide NAPAP with additional scientific inputs as it begins to prepare for its 1990 Final Assessment Report.     

An Overview of EPA’s Quality Assurance Program

Quality Assurance has been defined in many different ways to express concern for the “quality” of the output of some operation or function. For the purpose of this presentation, quality assurance is defined as the sum of those activities within an environmental monitoring or measurement program which are primarily for the purpose of documenting the precision, accuracy, representativeness, and completeness of the data that are produced. Further, we view quality assurance as a management tool which encompasses both administrative and technical functions which generally fall into three categories: (1) Prevention which includes those activities carried out prior to the proper placement and operation of the measurement system; (2) Evaluation which includes the continuous overview and checks on the performance of the systems and operators; and (3) Correction which includes changes made to improve or stabilize the capability and performance of the system.     

The State’s Role in the Development of Local Air Pollution Control Programs

This paper examines the history of air pollution control in the State of New Jersey, particularly, how it relates to the development of the state-local governmental relationship, and to the coordination of their respective control efforts. It also describes the methodology for developing local control programs. The information presented in the paper is directed to those individuals who may be able to analogize the experience in New Jersey to situations developing in their own jurisdictions.     

Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model,CMAQ 5.01

The Community Multiscale Air Quality (CMAQ) modeling system Version 5.0 (CMAQv5.0) was released by the U.S. Environmental Protection Agency (EPA) in February 2012, with an interim release (v5.01) in July 2012. Because CMAQ is a community model, the EPA encourages the development of proven alternative science treatments by external scientists and developers that can be incorporated as part of an official CMAQ release. This paper describes the implementation, evaluation, and testing of a plume-in-grid (PinG) module in CMAQ 5.01. The PinG module, also referred to as Advanced Plume Treatment (APT), provides the capability of resolving sub-grid-scale processes, such as the transport and chemistry of point-source plumes, in a grid model. The new PinG module in CMAQ 5.01 is applied and evaluated for two 15-day summer and winter periods in 2005 to the eastern United States, and the results are compared with those from the base CMAQ 5.01. Eighteen large point sources of NOx in the eastern United States were selected for explicit plume treatment with APT in the PinG simulation. The results show that overall model performance is negligibly affected when PinG treatment is included. However, the PinG model predicts significantly different contributions of the 18 sources to pollutant concentrations and deposition downwind of the point sources compared to the base model.

Implications: This study describes the incorporation of a plume-in-grid (PinG) capability within the latest version of the EPA grid model, CMAQ. The capability addresses the inherent limitation of the grid model to resolve processes, such as the evolution of point-source plumes, which occur at scales much smaller than the grid resolution. The base grid model and the PinG version predict different source contributions to ozone and PM_2.5 concentrations that need to be considered when source attribution studies are conducted to determine the impacts of large point sources on downwind concentrations and deposition of primary and secondary pollutants.     

The military’s responsibility for environmental protection in war and peace

Environmental Science and Pollution Research -     

Concentration and characterization of airborne particles in Tehran’s subway system

Particulate matter is an important air pollutant, especially in closed environments like underground subway stations. In this study, a total of 13 elements were determined from PM₁₀ and PM_2.5 samples collected at two subway stations (Imam Khomeini and Sadeghiye) in Tehran’s subway system. Sampling was conducted in April to August 2011 to measure PM concentrations in platform and adjacent outdoor air of the stations. In the Imam Khomeini station, the average concentrations of PM₁₀ and PM_2.5 were 94.4?±?26.3 and 52.3?±?16.5 μg m^?3 in the platform and 81.8?±?22.2 and 35?±?17.6 μg m^?3 in the outdoor air, respectively. In the Sadeghiye station, mean concentrations of PM₁₀ and PM_2.5 were 87.6?±?23 and 41.3?±?20.4 μg m^?3 in the platform and 73.9?±?17.3 and 30?±?15 μg m^?3, in the outdoor air, respectively. The relative contribution of elemental components in each particle fraction were accounted for 43 % (PM₁₀) and 47.7 % (PM_2.5) in platform of Imam Khomeini station and 15.9 % (PM₁₀) and 18.5 % (PM_2.5) in the outdoor air of this station. Also, at the Sadeghiye station, each fraction accounted for 31.6 % (PM₁₀) and 39.8 % (PM_2.5) in platform and was 11.7 % (PM₁₀) and 14.3 % (PM_2.5) in the outdoor. At the Imam Khomeini station, Fe was the predominant element to represent 32.4 and 36 % of the total mass of PM₁₀ and PM_2.5 in the platform and 11.5 and 13.3 % in the outdoor, respectively. At the Sadeghiye station, this element represented 22.7 and 29.8 % of total mass of PM₁₀ and PM_2.5 in the platform and 8.7 and 10.5 % in the outdoor air, respectively. Other major crustal elements were 5.8 % (PM₁₀) and 5.3 % (PM_2.5) in the Imam Khomeini station platform and 2.3 and 2.4 % in the outdoor air, respectively. The proportion of other minor elements was significantly lower, actually less than 7 % in total samples, and V was the minor concentration in total mass of PM₁₀ and PM_2.5 in both platform stations.     

State of the Arctic Conference 2010: International Perspectives on Progress of Research Responsive to Decision-Makers’ Information Needs

The SoA conference emphasized that urgent questions posed by society and decision-makers in response to rapid Arctic change require that Arctic research address the broader concepts of sustainability as well as adaptation to and mitigation of interrelated environmental and socioeconomic change. Murray et al. (submitted) explore progress made in this context. The SoA meeting demonstrated significant progress by the Arctic community of scientists and stakeholders in meeting this challenge, as well as the need to better engage the private sector and find more effective ways to partner with relevant research activities outside of the polar regions.     

Microbiota’s role in health and diseases

Environmental Science and Pollution Research - The microbiome is a term that usually refers to the community of various microorganisms that inhabit/live inside human/animal bodies or on their skin....     

Assessment of cadmium accumulation,toxicity, and tolerance in Brassicaceae and Fabaceae plants—implications for phytoremediation

This study, based on a greenhouse pot culture experiment conducted with 15-day-old rapeseed (Brassica campestris L. cv. Pusa Gold; family Brassicaceae) and moong bean (Vigna radiata L. Wilczek cv. Pusa Ratna; family Fabaceae) plants treated with cadmium (Cd) concentrations (0, 50, and 100 mg kg^?1 soil), investigates their potential for Cd accumulation and tolerance, and dissects the underlying basic physiological/biochemical mechanisms. In both species, plant dry mass decreased, while Cd concentration of both root and shoot increased with increase in soil Cd. Roots harbored a higher amount of Cd (vs. shoot) in B. campestris, while the reverse applied to V. radiata. By comparison, root Cd concentration was higher in B. campestris than in V. radiata. The high Cd concentrations in B. campestris roots and V. radiata shoots led to significant elevation in oxidative indices, as measured in terms of electrolyte leakage, H₂O₂ content, and lipid peroxidation. Both plants displayed differential adaptation strategies to counteract the Cd burden-caused anomalies in their roots and shoots. In B. campestris, increasing Cd burden led to a significantly decreased reduced glutathione (GSH) content but a significant increase in activities of GSH reductase (GR), GSH peroxidase (GPX), and GSH sulfotransferase (GST). However, in V. radiata, increasing Cd burden caused significant increase in GSH content and GR activity, but a significant decline in activities of GPX and GST. Cross talks on Cd burden of tissues and the adapted Cd tolerance strategies against Cd burden-accrued toxicity indicated that B. campestris and V. radiata are good Cd stabilizer and Cd extractor, respectively, wherein a fine tuning among the major components (GR, GPX, GST, GSH) of the GSH redox system helped the plants to counteract differentially the Cd load-induced anomalies in tissues. On the whole, the physiological/biochemical characterization of the B. campestris and V. radiata responses to varying Cd concentrations can be of great help in elaborating the innovative plant-based remediation technologies for metal/metalloid-contaminated sites.     

Cost and Benefits of Road Dust Control in Seattle’s Industrial Valley

The paving of gravel roads with an average daily traffic (ADT) over 15 is a least cost method for reducing suspended particulate In the air in Seattle. It is also a good business investment when the ADT exceeds 100. Clean roads, gutters, and parking lots may reduce or eliminate Seattle’s most serious environmental constraint on economic development. In a study done in Seattle’s Duwamish Valley the impact of road dust on air quality was measured by obtaining dust emission factors for vehicles traveling at 10, 20, and 30 mph on gravel as well as dusty paved roads. A University of Washington Mark II Cascade Impactor was mounted on a trailer and towed behind a car to determine the concentration and size distribution of this dust. It was found that each vehicle mile at 20 mph on unpaved roads contributed 7.0 Ib of dust to the air, 1.9 Ib consisting of particles smaller than 10 microns in diameter and 0.24 Ib below 2 microns. Three to eight percent by weight of this respirable dust was free silica, which is potentially toxic. The quantity of dust generated varies as an exponent of the speed. The concentrations of dust found in the air near a dry gravel road with an ADT of 250 reached 584 μg/m3 for an 8 hr work day. A 24 hr suspended particulate reading of 463 μg/m3 total and 3.83 μg/m3 free silica was found beside a dusty paved road with an ADT of 18,000. Nineteen miles of gravel roads and 110 miles of dusty paved roads contributed 2700 tons/year of particulate, of which 700 tons were below 10 microns. Paving or oiling such roads will produce benefits of $3,881,000 yearly in household cleaning, health care, sewer, vehicle operation, and road maintenance costs as well as an increase in property values. Clean roads can lower the cost of clean air in Seattle.     

Concentrations of phthalate esters and identification of other additives in PVC children’s toys

This study was intended to provide data on the composition of soft PVC toys, addressing the widest practicable range of chemical additives and including non-phthalate additives. The study also included toys from as many countries as possible, since for many, no data were available. A total of 72 toys were purchased in 17 countries. The majority (64) were PVC or had PVC sections. In almost all the soft PVC toys analysed, phthalates comprised a sizeable proportion (most frequently 10–40%) of the total weight of the toy. The predominant phthalates detected were diisononyl phthalate (DINP) and di(2-ethylhexyl) phthalate (DEHP). Other phthalates identified in high concentrations in some toys include isomeric mixes of diisooctyl phthalate (DIOP) and diisodecyl phthalate (DIDP). The estrogenic chemical nonylphenol was isolated from 13 toys, while 2 toys were found to contain the fungicide Fungitrol 11 (Folpet). 78% of PVC toys contained one or more extractable organic compounds in addition to those reported above. Some of these data have been released previously by Greenpeace and made available on the internet.This report, however, which is intended for a technically expert audience, has been peer reviewed and contains further analytical data that have not been published before.     

Technical and economic evaluation of biogas capture and treatment for the Piedras Blancas landfill in Córdoba,Argentina

Landfill gas (LFG) management is one of the most important tasks for landfill operation and closure because of its impact in potential global warming. The aim of this work is to present a case history evaluating an LFG capture and treatment system for the present landfill facility in Córdoba, Argentina. The results may be relevant for many developing countries around the world where landfill gas is not being properly managed. The LFG generation is evaluated by modeling gas production applying the zero-order model, Landfill Gas Emissions Model (LandGEM; U.S. Environmental Protection Agency [EPA]), Scholl Canyon model, and triangular model. Variability in waste properties, weather, and landfill management conditions are analyzed in order to evaluate the feasibility of implementing different treatment systems. The results show the advantages of capturing and treating LFG in order to reduce the emissions of gases responsible for global warming and to determine the revenue rate needed for the project’s financial requirements. This particular project reduces by half the emission of equivalent tons of carbon dioxide (CO₂) compared with the situation where there is no gas treatment. In addition, the study highlights the need for a change in the electricity prices if it is to be economically feasible to implement the project in the current Argentinean electrical market.

Implications: Methane has 21 times more greenhouse gas potential than carbon dioxide. Because of that, it is of great importance to adequately manage biogas emissions from landfills. In addition, it is environmentally convenient to use this product as an alternative energy source, since it prevents methane emissions while preventing fossil fuel consumption, minimizing carbon dioxide emissions. Performed analysis indicated that biogas capturing and energy generation implies 3 times less equivalent carbon dioxide emissions; however, a change in the Argentinean electrical market fees are required to guarantee the financial feasibility of the project.     

Analysis of organochlorine pesticide residues in human and cow’s milk in the towns of Asendabo,Serbo and Jimma in South-Western Ethiopia

The level of some OCPs in human and cow milk collected from Asendabo, Serbo and Jimma in South-West Ethiopia were analyzed using GC–ECD. Results of the analysis indicated that all samples contained detectable quantities of p,p′-DDT and its metabolites, p,p-DDE and p,p-DDD, but none of the other OCPs analyzed. Mean levels of total DDT in the human and cow milk samples in the three areas were 12.68 and 0.389 μg g^?1 respectively. The distributions of p,p-DDT, p,p-DDE and p,p-DDD in the human milk samples from the three locations followed the same trend in which the proportion of p,p-DDT was the highest in all the three cases, comprising 55–71% of total DDT, followed by p,p-DDE, 26–39%, and the least, p,p-DDD of 2–5%. The mean ratio of DDT/DDE concentration for the three areas was calculated to be 2.01. This value was much higher than the values reported from other countries in earlier studies and indicates the existence of a higher quantity of DDT from a fresh input in the three study areas. The mean estimated daily intake of DDT by infants from mother’s milk in the three locations was found to be 62.17 μg kg^?1 body weight, which is about three times higher than the acceptable daily intake set by WHO/FAO for total DDT, 20 μg kg^?1 of body weight. This alarmingly high daily intake value is a cause for concern, since children are highly susceptible to effects from such environmental contaminants. The study has revealed that people in the study areas are facing exposure to DDT from recent use. The observed contamination of mother’s milk and the possible transfer of the contaminant from mother to child is an obvious risk associated with breast-feeding in the study areas and possibly in other parts of the country too.     

Application of the Fenton’s process in a bubble column reactor for hydroquinone degradation

The aim of this study was to assess the degradation and mineralization of hydroquinone (HQ) by the Fenton’s process in a bubble column reactor (BCR). The effect of the main operating variables, namely, air flow rate, effluent volume, hydrogen peroxide (H₂O₂) concentration, catalyst (Fe²⁺) dose, initial pH, and temperature, were assessed. For all air flow rates tested, no concentration gradients along the column were noticed, evidencing that a good mixing was reached in the BCR. For the best conditions tested ([H₂O₂] = 500 mg/L, [Fe²⁺] = 45 mg/L, T = 24 °C, Q _air = 2.5 mL/min, pH = 3.0, and V = 5 L), complete HQ degradation was reached, with ~ 39% of total organic carbon (TOC) removal, and an efficiency of the oxidant use—η _H2O2—of 0.39 (ratio between TOC removed per H₂O₂ consumed normalized by the theoretical stoichiometric value); moreover, a non-toxic effluent was generated. Under these conditions, the intermediates and final oxidation compounds identified and quantified were a few carboxylic acids, namely, maleic, pyruvic, and oxalic. As a strategy to improve the TOC removal, a gradual dosage of the optimal H₂O₂ concentration was implemented, being obtained ~ 55% of mineralization (with complete HQ degradation). Finally, the matrix effect was evaluated, for which a real wastewater was spiked with 100 mg/L of HQ; no reduction in terms of HQ degradation and mineralization was observed compared to the solution in distilled water.     

Henry’s law constant measurements for formaldehyde and benzaldehyde as a function of temperature and water composition

Henry’s law constants H of formaldehyde and benzaldehyde were determined using a dynamic system based on the water/air equilibrium at the interface within the length of a microporous tube. The measurements were conducted over the range 273–293 K in (i) deionized water, (ii) 35 g L^?1 solution of NaCl simulating seawater and (iii) two nitric acid solutions, i.e. 0.63 and 6.3 wt%.In pure water, the obtained data were used to derive the following Arrhenius expressions: ln H = (6423 ± 542)/T ? (13.4 ± 2.0) and ln H = (6258 ± 280)/T ? (17.5 ± 1.0) for formaldehyde and benzaldehyde, respectively. The H values, calculated at 293 K from Arrhenius expressions cited above were the following (in units of M atm^?1): H = 5020 ± 1170 (formaldehyde), H = 47 ± 5 (benzaldehyde). The temperature dependence of H permits then to derive the solvation enthalpies for both compounds: ΔH_solv = ?(53.4 ± 4.5) kJ mol^?1 and ΔH_solv = ?(52.0 ± 2.3) kJ mol^?1 for formaldehyde and benzaldehyde, respectively.In 35 g L^?1 salt solution, the H values were 27–66% and 12–21% lower than their respective determinations in deionized water, for formaldehyde and benzaldehyde respectively. The observed salt effect was used to estimate the following Setschenow coefficients at 293 K for 0.6 M NaCl: formaldehyde (0.21) and benzaldehyde (0.09).In 6.3 wt% nitric acid solution, H values of benzaldehyde were approximately 30% higher than those found in pure water although no significant influence was observed for formaldehyde.Finally, our experimental data were then used to estimate the fractions of formaldehyde and benzaldehyde in atmospheric aqueous phase and their derived atmospheric lifetimes.