Correlation of field-measured toxicity with chemical concentration and pollutant availability.

Direct field toxicity tests were performed in two Louisiana waterways, Bayous Trepagnier and St. John, on sediments containing organic/heavy metal mixtures. Our approach involved bioluminescent bacterial toxicity assays (using DeltaTox, which qualitatively identifies polluted areas, and Microtox, which quantifies toxicity). Samples were more completely analyzed in our laboratory using inductively coupled plasma atomic emission spectroscopy (ICP-AES) and gas chromatography/mass spectrometry (GC/MS). Results indicate that lead is the primary toxic metal at the sites examined, though concentrations of metals fluctuate due to spatial variation and the dynamic nature of the waterways. Polycyclic aromatic hydrocarbons (PAHs) are the most abundant group of organics measured and appear to contribute to the overall toxic response. DeltaTox located toxic hotspots where there was an average light loss of 53-100%. Toxicity results from both assays agree but are well correlated with concentration measurements only for certain sediment fractions. Overall, the DeltaTox/Microtox approach appears to be rapid and cost effective for on-site hotspot identification, and may increase understanding of hazards associated with heavy metal and organic contaminants in these waterways.     

A strategy for reduction of toxic indoor emissions

Many building materials emit air pollutants. To reduce the exposure of the population to the major groups of toxic indoor pollutants, a strategy is put forward which concentrates on a reduction of the emission of carcinogenic substances, eye-airway irritants, and odors from building materials. It is the experience of the Danish National Inventory of Toxic Substances and Products that preventive measures in the form of either a complete removal of a substance or replacement of a toxic substance by a less toxic substance are possible. Since 1975 asbestos has been banned in Denmark for insulation purposes, and its substitution with other materials has caused no serious technical problems. Since 1978 notification of epoxy and polyurethane products has been mandatory in Denmark, and as of October 1981, 1771 building materials have been registered: sealants (216); glues and adhesives (387); paints and lacquers (1113); and wall/floor coatings (403). (Some of these products have more than one application.) Based on an analysis of publicly available information on the labels of these products, we conclude that a notification system makes it possible to select the products with the least impact on human health and comfort and, consequently, with the lowest need for ventilation. It is suggested that these toxicological principles should be used for the improvement of existing and future building materials.     

Setting up the criteria and credit-awarding scheme for building interior material selection to achieve better indoor air quality

Methods, standards, and regulations that are aimed to reduce indoor air pollution from building materials are critically reviewed. These are classified as content control and emission control. Methods and standards can be found in both of these two classes. In the regulation domain, only content control is enforced in some countries and some regions, and asbestos is the only building material that is banned for building use. The controlled pollutants include heavy metals, radon, formaldehyde, and volatile organic compounds (VOCs). Emission rate control based upon environment chamber testing is very much in the nature of voluntary product labeling and ranking, and this mainly targets formaldehyde and VOC emissions. It is suggested that radon emission from building materials should be subject to similar emission rate control. A comprehensive set criteria and credit-awarding scheme that encourages the use of low-emission building material is synthesized, and how this scheme can be practiced in building design is proposed and discussed.     

Physiological effects of nanoparticles on fish: a comparison of nanometals versus metal ions

The use of nanoscale materials is growing exponentially, but there are also concerns about the environmental hazard to aquatic biota. Metal-containing engineered nanoparticles (NPs) are an important group of these new materials, and are often made of one metal (e.g., Cu-NPs and Ag-NPs), metal oxides (e.g., ZnO and TiO(2) NPs), or composite of several metals. The physiological effects and toxicity of trace metals in the traditional dissolved form are relatively well known and the overall aim of this review was to use our existing conceptual framework of metal toxicity in fish to compare and contrast the effects of nanometals. Conceptually, there are some fundamental differences that relate to bioavailability and uptake. The chemistry and behaviour of nanometals involves dynamic aspects of aggregation theory, rather than the equilibrium models traditionally used for free metal ions. Some NPs, such as Cu-NPs, may also release free metal ions from the surface of the particle. Biological uptake of NPs is not likely via ion transporters, but endocytosis is a possible uptake mechanism. The body distribution, metabolism, and excretion of nanometals is poorly understood and hampered by a lack of methods for measuring NPs in tissues. Although data sets are still limited, emerging studies on the acute toxicity of nanometals have so far shown that these materials can be lethal to fish in the mg-μgl(-1) range, depending on the type of material. Evidence suggests that some nanometals can be more acutely toxic to some fish than dissolved forms. For example, juvenile zebrafish have a 48-h LC(50) of about 0.71 and 1.78mgl(-1) for nano- and dissolved forms of Cu respectively. The acute toxicity of metal NPs is not always explained, or only partly explained, by the presence of free metal ions; suggesting that other novel mechanisms may be involved in bioavailability. Evidence suggests that nanometals can cause a range of sublethal effects in fish including respiratory toxicity, disturbances to trace elements in tissues, inhibition of Na(+)K(+)-ATPase, and oxidative stress. Organ pathologies from nanometals can be found in a range of organs including the gill, liver, intestine, and brain. These sublethal effects suggest some common features in the sublethal responses to nanometals compared to metal salts. Effects on early life stages of fish are also emerging, with reports of nanometals crossing the chorion (e.g., Ag-NPs), and suggestions that the nano-forms of some metals (Cu-NPs and ZnO NPs) may be more toxic to embryos or juveniles, than the equivalent metal salt. It remains possible that nanometals could interfere with, and/or stimulate stress responses in fish; but data has yet to be collected on this aspect. We conclude that nanometals do have adverse physiological effects on fish, and the hazard for some metal NPs will be different to the traditional dissolved forms of metals.     

Pollution of the Begej Canal sediment--metals, radioactivity and toxicity assessment

The Begej Canal is one among a large number of canals in Vojvodina (Northern Province of Serbia and Montenegro). The paper describes a study of metal and radioactivity contamination of the Begej Canal sediment. It is also concerned with the evaluation of sediment acute toxicity based on standard test species Daphnia magna and simultaneously extracted metals and acid volatile sulfides. The quality of sediment was assessed according to Dutch standards, but the results were also compared with some Canadian and USEPA (United States Environmental Protection Agency) guidelines for sediment quality. The results showed severe pollution with chromium, copper, cadmium and zinc, whereby the anthropogenic origin of these contaminants was indicated. The tests of toxicity of sediment pore water to D. magna, gave no indication of the presence of substances in acutely toxic concentrations to this species. It can be speculated that, despite of high metal contents, the observed toxicity was low because of the high contents of clay and iron, as well as sulphide. Also, based on a comparison with the Danube sediment and Vojvodina soil in general, the data of the Begej sediment contamination with 238U and 137Cs. The 137Cs data were used for approximate dating of the sediment. No traces of contamination by nuclear power plants in the region were found, while the presence of technologically enhanced naturally occurring radioactive materials (TENORM) was proved. Conclusions based on different criteria for sediment quality assessment were in some cases contradictory. Study also showed that radioactivity aspects can be useful in sediment quality surveys. The obtained results will be invaluable for the future activities regarding integrated water management based on EC Water Framework Directive (2000/60/EC) in the Danube basin, and particularly in the region of crossborder water body of the Begej Canal.     

Evolution of electronic waste toxicity: Trends in innovation and regulation

Rapid innovation in printed circuit board, and the uncertainties surrounding quantification of the human and environmental health impacts of e-waste disposal have made it difficult to confirm the influence of evolving e-waste management strategies and regulatory policies on materials. To assess these influences, we analyzed hazardous chemicals in a market-representative set of Waste printed circuit boards (WPCBs, 1996–2010). We used standard leaching tests to characterize hazard potential and USEtox® to project impacts on human health and ecosystem. The results demonstrate that command-and-control regulations have had minimal impacts on WPCBs composition and toxicity risks; whereas technological innovation may have been influenced more by resource conservation, including a declining trend in the use of precious metals such as gold. WPCBs remain classified as hazardous under U.S. and California laws because of excessive toxic metals. Lead poses the most significant risk for cancers; zinc for non-cancer diseases; copper had the largest potential impact on ecosystem quality. Among organics, acenaphthylene, the largest risk for cancers; naphthalene for non-cancer diseases; pyrene has the highest potential for ecotoxicological impacts. These findings support the need for stronger enforcement of international policies and technology innovation to implement the strategy of design-for-the-environment and to encourage recovery, recycling, and reuse of WPCBs.     

A hybrid model for remanufacturing facility location problem in a closed-loop supply chain

Traditional supply chain design is merely based on the open loop or forward flow of materials, neglecting reverse flow for recovery of materials despite the recent concerns of customers and governments about environmental and production cost reductions. New supply chain design should be closed loop which implements traditional supply chain concepts with reverse flow or a material recovery system to reduce production cost and enhance customer satisfaction about environmental consciousness and to meet legal requirements. In our research, we designed a closed-loop supply chain which consists of recovery options such as collection centres and remanufacturing plants (reverse flow) in addition to traditional supply chain tiers (forward flow), and tried to find the best location for these facilities in a discrete space based on decision makers' opinions. Since there are uncertainties about decision parameters in an uncapacitated facility location problem, we implemented the fuzzy TOPSIS method to solve the location decision problem and find the best place to locate a remanufacturing facility.     

环境规制对技术效率和生产力损失的影响分析

以中国工业为研究对象,以经济发展程度不同所分的东部、中部和西部地区兰个地区作为研究区域,采用非参数数据包络法(DEA)中的径自效率测量方法(radial efficiency measure)为主要研究方法,分析了在1998-2005年期间环境规制对中国工业的技术效率和生产力损失的影响.研究结果表明,在指定的研究期间,环境规制使得中国工业技术效率提高,但是对于生产力的发展却产生了负面的影响.三个地区之间受环境规制影响的差异较大,其中东部为环境规制所付出的成本最大,即东部为环境污染所付出的环境成本最高,这也是为何从九十年代开始,污染物从东部往中西部转移的原因;从受污染物影响的角度来看,因控制废水而引起的生产力损失大于因控制SO2而引起的生产力损失,即对于中国工业,废水的环境成本大于SO2的环境成本.另外,从研究结果中也可知,在中国现有的生产方式下,实施严格的环境规制有一定难度,所以改变旧的生产方式,实施可持续发展的生产方式是当务之急.     

Comparative toxicity of solid waste leachates to Daphnia magna

The comparative acute and chronic toxicities of municipal, industrial, coal-fired power plant, and synthetic fuel solid waste leachates to the aquatic invertebrate Daphnia magna were determined. Seventeen leachates were laboratory-derived by extraction with 0.5 N acetic acid, and one, an arsenic-contaminated groundwater, was naturally derived. The acute toxicity 48-h LC₅₀ estimates (concentrations of the test materials that killed 50% of the test organisms in 48 h) ranged from 0.0005% for a dye waste leachate to > 100% (i.e., undiluted) for a coal gasification waste leachate. The most toxic leachates were derived from a dye waste, a plater's waste, and the arsenic-contaminated groundwater, and the least toxic were from a soybean process cake waste and a coal gasification waste. Of the 16 leachates used in the 28 day chronic toxicity tests, only the arsenic-contaminated groundwater and a municipal sewage sludge significantly affected D. magna reproduction. The former material at 1.0% concentration and the sludge at 0.1% caused about an 88% reduction in the numbers of young produced by exposed females compared with controls. Generally, the industrial waste leachates were more toxic than those from the power plant and synthetic fuel wastes. Because its presence in the test materials interfered with interpretation of the results, acetic acid may not be an appropriate extraction medium for preparation of leachates.     

Decommissioning a phosphoric acid production plant: a radiological protection case study

During a preliminary survey at the area of an abandoned fertilizer plant, increased levels of radioactivity were measured at places, buildings, constructions and materials. The extent of the contamination was determined and the affected areas were characterized as controlled areas. After the quantitative and qualitative determination of the contaminated materials, the decontamination was planned and performed step by step: the contaminated materials were categorized according to their physical characteristics (scrap metals, plastic pipes, scales and residues, building materials, etc) and according to their level of radioactivity. Depending on the material type, different decontamination and disposal options were proposed; the most appropriate technique was chosen taking into account apart from technical issues, the legal framework, radiation protection issues, the opinion of the local authorities involved as well as the owner’s wish. After taking away the biggest amount of the contaminated materials, an iterative process consisting of surveys and decontamination actions was performed in order to remove the residual traces of contamination from the area. During the final survey, no residual surface contamination was detected; some sparsely distributed low level contaminated materials deeply immersed into the soil were found and removed.     

Evaluating efforts to build sustainable WEEE reverse logistics network design: comparison of regulatory and non-regulatory approaches

Many developing countries such as Turkey are still making an effort on building an infrastructure for waste of electrical and electronic equipment (WEEE) reverse logistic network design (RLND) processes. It is obvious that policies/laws/regulations related to WEEE management provide a sustainable framework for implementation in the RLND. The question is here: Does the implementation of WEEE directives make sense in terms of reducing the total cost of the network in the long term? This study aims to compare regulatory and non-regulatory situations of WEEE RLND in developing countries by formulating two models named as ‘regulatory’ and ‘non-regulatory’. Model 1 is considered as sustainable with economic, environmental and social goals, and the quotas imposed by the environmental directive are taken into consideration as the data of product return amount. In Model 2, only economic goal is considered, and product return amount is forecasted using Artificial Neural Network (ANN). A case study is conducted in a recycling company in order to evaluate performance of the proposed models. This study contributes to the relevant literature by (1) comparing the regulatory and non-regulatory situations RL models explicitly and (2) proposing ANN model to forecast EEE product return or WEEE quantity for non-regulatory situation.     

Optimal site selection for fluting paper mill from agricultural wastes in Golestan Province,Iran

Today, the issue of site selection for industrial units in developing countries which are poor in wood resources is considered as a vital matter and it is one of the key measures in the process of building industrial and giving service units. In every country there are some provinces and states which are more useful than other parts owing to primary infrastructures and facilities for industrialisation. As one of the suitable provinces of Iran, thanks to its lignocelluloses resources with 1,822,696 tons of exploitable waste, Golestan Province has a very good potential for building lignocelluloses products mills, such as fluting paper. For this end, in 2010, effective indices in fluting paper mill establishment were recognised in Golestan Province. Results showed that materials and products were the most important main indices and the preparation cost of raw materials was the most important sub-index. Finally, questionnaires were prepared for the best site selection and choices were evaluated according to the structure of interests and costs. The results of calculations performed through analytical hierarchy processes and in Expert Choice Software indicated that Gonbad City had the highest interest/cost ratio, and therefore, it is the best place for the establishment of floating paper mills from agricultural wastes in Golestan Province.     

两种制度下公共资源长期耗用之比较

丁和张维迎对“公共地悲剧”的论述,是以参与耗用公共资源的人数不变为假定的。但是,有些资源即使在长期中也无法改变其公共资源的属性,这使得耗用这类资源的人数在长期中会发生变化。只要有超额利润,就会有更多的人参与耗用该资源;反之,则会有人退出。通过构建数学模型,探讨了长期中两种不同的制度安排（个体理性与集体理性）下,人们耗用这种无进入壁垒公共资源的均衡情况的差异。结果显示,集体理性可以使该资源的耗用速度减慢,但是会导致生产效率低下、社会福利减少;而个体理性下资源的消耗速度更快,但可以达到提高生产效率、增加社会福利的效果。进一步认为,解决资源短缺问题,制度只能是权宜之计,技术才是根本出路。     

Dynamics of aluminum speciation in forest-well drainage waters from the Rhode River watershed, Maryland

This paper reports an investigation of the dynamics of aluminum (Al) speciation in the forest-well waters from study site 110 of the Rhode River watershed, a representative sub-unit of Chesapeake Bay. Seasonal changes of Al speciation are evaluated by a modified MINEQL computer model using chemical equilibrium calculation. It was found that Al-F and Al-Org complexes were the dominate forms, whereas toxic forms of Al3+ and Al-OH were not significant. This indicates that Al toxicity is not very serious in the Rhode River area due to the high concentrations of fluoride and organic materials, even though sometimes pH is very low (approximately 4). Increased H+ or some other associated factors may be responsible for the decline in fish and amphibian population on the watershed.     

评析中国现行环境保护投资体制

本文通过对我国近15年环保投资相关数据的分析,揭示了现行环保投资体制失灵的一个重要因素是结构上失衡,在环保投资中没有体现环保设施运营费用,直接影响了环保投资的效益,其次,一些指标的设计严重偏离了现实,影响了环保投资的有机构成,也导致环境政策的失效,在此基础上,结合实际,提出初步的改革设想。     

A study on aquaculture industry regulations and policies of globally representative states

Aquaculture has a long history,and has achieved rapid development from 1950 to 2010,especially since the 1990s.Nevertheless,aquaculture has also seen a series of problems emerge.Inevitably,aquaculture interacts with the environment and society.Rapid development requires that close attention be paid to potential environmental and social impacts and their prevention or mitigation.The development and management of aquaculture is related closely with a variety of legal and institutional arrangements.Thus,aquaculture raises numerous legal and institutional issues.This paper explores actual legal and institutional practices of global representative aquaculture countries and provides a comprehensive account of the legislation and policies of different countries.Further,this paper reveals that the optimal legal framework for aquaculture is in line with related international regulations(especially the soft laws)and strictly operational,and the corresponding policy framework should establish early access and warning,as well as post assessment and feedback mechanisms.     

Factors affecting metal toxicity to (and accumulation by) aquatic organisms — Overview

This literature review encompasses aquatic environmental toxicities of metals and metalloids. The emphasis is on the influencing factors on metal toxicity to aquatic organisms. The effects of environmental factors on metal uptake are also discussed. The factors can be divided into biotic and abiotic. The biotic factors include tolerance, size and life stages, species, and nutrition related to the test organisms. The abiotic factors include organic substances, pH, temperature, alkalinity and hardness, inorganic ligands, interactions, sediments, and others. These factors can alter metal toxicity in the aquatic environment substantially, mostly causing attenuating effect. The literature shows divergent results. For example, the interactions between Cd and Zn were reported to be synergistic by some researchers and antagonistic by others. It is recommended that environmental hazard assessment takes into consideration the results of standard toxicity tests and site-specific conditions which can moderate metal toxicity considerably.     

Natural radioactivity and radon exhalation in building materials used in Italian dwellings

Forty-two samples of building materials commonly used in Italian dwellings were surveyed for natural radioactivity. External (gamma), as defined and used by the European Commission, and internal (alpha) hazard indexes were calculated and radon specific exhalation rate and emanation fraction were measured. The accumulation method, by using the E-PERM electret ion chambers, was employed to determine specific exhalation rates of 222Rn. Several of the materials had hazard indexes that exceeded the European Commission limit values. However, it was evident that limit values for internal hazard indexes set based on Rn emanation should take into account the properties and use of the materials. For example, Rn emanation from basalt and glazed tiles was substantially lower than the Rn emanation from other materials with similar hazard indexes. Clearly there is need for improved guidelines and regulations in this area.     

Thallium: a review of public health and environmental concerns

Thallium (Tl) is a rare but widely dispersed element. All forms of thallium are soluble enough to be toxic to living organisms. Thallium is more toxic to humans than mercury, cadmium, lead, copper or zinc and has been responsible for many accidental, occupational, deliberate, and therapeutic poisonings since its discovery in 1861. Its chemical behavior resembles the heavy metals (lead, gold and silver) on the one hand and the alkali metals (K, Rb, Cs) on the other. It occurs almost exclusively in natural waters as monovalent thallous cation. The solubility of thallous compounds is relatively high so that monovalent thallium is readily transported through aqueous routes into the environment. Tl can be transferred from soils to crops readily and accrues in food crops. The fascinating chemistry and high toxicity potential make thallium and its compounds of particular scientific interest and environmental concern. Thallium was detected in base-metal mining effluents. The conventional removal of heavy metals from wastewater has little effect on thallium. In this review, various treatment options and removal technologies are enumerated in order to protect the environment from thallium toxicity.     

Occurrence,fate and effects of azoxystrobin in aquatic ecosystems: A review

The use of pesticides for crop protection may result in the presence of toxic residues in environmental matrices. In the aquatic environment, pesticides might freely dissolve in the water or bind to suspended matter and to the sediments, and might be transferred to the organisms' tissues during bioaccumulation processes, resulting in adverse consequences to non-target species. One such group of synthetic organic pesticides widely used worldwide to combat pathogenic fungi affecting plants is the strobilurin chemical group. Whereas they are designed to control fungal pathogens, their general modes of action are not specific to fungi. Consequently, they can be potentially toxic to a wide range of non-target organisms. The present work had the intent to conduct an extensive literature review to find relevant research on the occurrence, fate and effects of azoxystrobin, the first patent of the strobilurin compounds, in aquatic ecosystems in order to identify strengths and gaps in the scientific database. Analytical procedures and existing legislation and regulations were also assessed. Data gathered in the present review revealed that analytical reference standards for the most relevant environmental metabolites of azoxystrobin are needed. Validated confirmatory methods for complex matrices, like sediment and aquatic organisms' tissues, are very limited. Important knowledge of base-line values of azoxystrobin and its metabolites in natural tropical and estuarine/marine ecosystems is lacking. Moreover, some environmental concentrations of azoxystrobin found in the present review are above the Regulatory Acceptable Concentration (RAC) in what concerns risk to aquatic invertebrates and the No Observed Ecologically Adverse Effect Concentration (NOEAEC) reported for freshwater communities. The present review also showed that there are very few data on azoxystrobin toxicity to different aquatic organisms, especially in what concerns estuarine/marine organisms. Besides, toxicity studies mostly address azoxystrobin and usually neglect the more relevant environmental metabolites. Further work is also required in what concerns effects of exposure to multi-stressors, e.g. pesticide mixtures. Even though Log K_ow for azoxystrobin and R234886, the main metabolite of azoxystrobin in water, are below 3, the bio-concentration factor and the bioaccumulation potential for azoxystrobin are absent in the literature. Moreover, no single study on bioaccumulation and biomagnification processes was found in the present review.