Application of active disassembly to extend profitable remanufacturing in small electrical and electronic products

Alternative production approaches are required because of conventional manufacturing's adverse environmental impacts. Remanufacturing returns used products to at least original performance specification from customers' perspectives and gives the resultant products warranties at least equal to that of new equivalents. Remanufacturing is relatively novel in research terms compared to conventional manufacture and recycling but often is more profitable than both. It would help manufacturers address competitive, environmental and legislative pressures by enabling them to meet pressing waste legislation while producing high-quality, lower cost products with less environmentally damaging end-of-life (EoL) and manufacturing modes. Remanufacturing is highly profitable in large, complex mechanical and electromechanical products but with conventional manufacturing and design modes not so in smaller products; particularly fast moving ones. However, effective waste management is urgently required for such products because waste electrical and electronic equipment constitutes the fastest growing EU waste stream and a large percentage of products being produced by major developing economies such as China are of this type. Active disassembly (AD) enables product non-destructive, self-disassembly at EoL and was invented to facilitate a step-change improvement in recycling. This research investigated the use of AD to extend profitable remanufacturing into small EoL electrical and electronic products.     

Design methodology for active disassembly based on the decapitated head method

Due to the characteristic that shape memory materials can quickly return to their original shape and have large deformation, such materials can be used as the connection in active disassembly devices. However, existing active disassembly devices typically require two moulding steps and complicated machining processes that result in high manufacturing cost. The active disassembly device based on the proposed decapitated head method has only one moulding step and lower manufacturing cost. Its disassembly mode is local damage disassembly, which can decrease the active disassembly cost and improve disassembly efficiency. This paper describes the active disassembly theory and the design methodology based on the decapitated head method, and then analyses the design criteria and feasibility of this method with a real case study.     

Product innovation for sustainability: on product properties for efficient disassembly

Due to increasing societal awareness, nowadays companies need to consider environmental issues in their business activities. A requirement that has entered the agenda is the design of products to support efficient end‐of‐life management. However, though previous research has addressed various disassembly aspects there is a need for more understanding on which product properties are essential for efficient disassembly processes. Better understanding is also required regarding when, during the product development process, these properties are established. On the basis of empirical studies of disassembly of electrical and electronic equipment and vehicles, this paper suggests a number of product properties that are essential for efficiency of the disassembly process. Furthermore, the paper analyses when these properties are set in the product development process. Four product properties, denoted disassembly properties, have been identified: ease of identification; accessibility; ease of separation; and ease of handling. The analysis shows that these properties are affected during all product development phases. Especially in the early phases it is crucial to consider the disassembly properties in order to avoid unnecessary and costly design changes that may occur in the later development phases if the design solutions are pulled in the wrong direction.     

Assembly operator training and process planning via virtual systems

In this paper, we present an integrated intuitive system for assembly operators training and assembly process planning by combining virtual reality with motion-tracking technologies. The developed conceptual prototype for assembly planning and training enables individuals to interact with a virtual environment in real time. It extends the new technologies of motion tracking and integrates them with virtual environment technologies to create real-time virtual work cell simulations in which assembly operators may be immersed with hands-on experiences. In addition to operators training, the experimental results to date are presented to demonstrate the potential contributions of human skills in achieving effective assembly planning including disassembly operations. It is expected that this approach will lead to environment-friendly and sustainable operations by conserving energy and cost that are first tested in a human-emerged virtual system.     

Present and future environmental impacts on the coastal zone of Berau (East Kalimantan, Indonesia), a deductive scenario analysis

Using the drivers–pressures–state–impact–responses (DPSIR) analytical framework, local stakeholder respondents and experts were interviewed to construct and prioritize a causality network that links ecosystem state of the coastal waters of Berau (East Kalimantan, Indonesia) with societal drivers of change. Particularly on the perceived top priority drivers and pressures, consensus among respondents was considerable. The constructed network was found to be consistent with literature findings from elsewhere in SE Asia. This causality network was then confronted with a local articulation of the SRES scenarios (IPCCs Special Report on Emissions Scenarios: A1, A2, B1, B2), and four plausible trajectories of future change were deduced over a period of 20?years, until 2030. Our scenario articulations differed greatly in the projected immigration influx into the region, in local economic growth and in institutional strength of governance. Under business-as-usual conditions, it is foreseen that fisheries will continue to overexploit the resource, and inland and mangrove deforestation, as well as sediment and sewage loading of the coastal waters, will increase, leading to declines in coral and seagrass extent and depleted fisheries. Scenarios with continued immigration (~A1, A2) will probably aggravate this pattern, whereas those with reduced immigration (~B1, B2) would appear to lead to considerable improvements in the state of the coastal waters of Berau.     

A meta‐heuristic approach for supporting adaptive disassembly sequencing using a multi‐objective concept

One of the key features of environmentally conscious manufacturing has been the efforts to promote product recycling and remanufacturing. Efficient material re‐utilisation through product disassembly to retrieve the desired parts and/or subassemblies is one rational approach. This is because it can promote the conservation of both material and energy resources whilst concurrently reducing environmental impact. However, because manufactured products may be made from many components, disassembly load becomes a critical factor that may obstruct the recovery of materials. Accordingly, it is essential to develop a practical method for deriving a disassembly plan to decrease such load, and to endow a certain value to the product at the end of its life cycle. With this understanding, the authors have developed a practical procedure to produce an adaptive disassembly strategy. The authors have applied a meta‐heuristic method known as genetic programming (GP) as a search engine to derive the adaptive disassembly sequence together with a multi‐objective optimisation method termed MOON^2R. The authors have also proposed a hierarchical sequencing method to cope with large/complex products and added several ideas to increase the applicability associated with the interests in disassembly of hazardous and/or valuable parts, and alternative disassembly actions. Through numerical experiments, the authors examined the effectiveness of the proposed approach by showing its support for relevant planning and design decisions for product recycling and remanufacturing from various viewpoints.     

A simplified method for the design and sizing of anaerobic digestion systems for smaller farms

Anaerobic digestion (AD) as a waste treatment practice has existed for nearly 200 years and has become an accepted option for many farming and small-scale residential operations. Many developing countries now encourage the use of AD in order to meet new environmental regulations and/or to provide small amounts of energy resulting from methane generated during the process. This development has been met with some difficulty due to the lack of resources and knowledge of the systems in many of the rural communities in which these digesters are placed. A properly designed AD system can help prevent soil and water pollution as well as help mitigate methane emissions by capturing them for use as a potential energy source. This paper focuses on providing guidance to the proper design and sizing of an AD system for typical small farms, which account for the majority of dairy farms worldwide. A focus was on the implementation of such systems as they might be applied in Central America, although the aspects studied here can be applied for AD systems handling animal waste streams practically anywhere. We provide a method for sizing of anaerobic digester systems based on design standards from the US National Resource Conservation Service and using field sampled data of holding pen wash water runoff. An overview of the decision process for alternative designs is given, and simple-to-use nomographs are presented for use in sizing of an anaerobic digester system for smaller (non-industrial)-scale farms.     

跨国气候伙伴关系治理及其对中国的启示

《巴黎协定》为全球应对气候变化确立了"自下而上"的治理路径,有助于增强各类行为体的参与动力,而后续的巴黎进程更适用于建立以跨国气候伙伴关系为代表的治理模式。在这一模式下,主要施动者是地方政府和包括气候NGO、市民社会在内的非国家行为体。他们不仅在议程设定、透明度、监督执行和代表利益攸关方等方面具有不可替代的作用,而且还具有擅长短期本土化项目管理等优势。本文从国际关系的跨国行为体视角出发,对这类伙伴关系的兴起及其合法性、有效性进行分析,所获得的基本结论为:(1)各国达成《巴黎协定》的内在逻辑有助于跨国伙伴关系发挥作用;(2)当前跨国气候伙伴关系参与全球气候治理的路径呈现不断制度化的趋势;(3)跨国伙伴关系治理的合法性和有效性具有一定特殊性;(4)非国家行为体在参与治理的过程中逐渐交叉,更易形成联盟且相关的观念外溢也更为便利。这一新兴治理关系对中国的启示包括:(1)重新审视非国家行为体在全球气候治理中的作用;(2)评估一些具有重大影响力的跨国伙伴关系,并适当鼓励国内相关机构和组织参与全球进程;(3)在国内层面,以渐进的方式,有针对性地参与、建立一些跨国气候伙伴关系,有助于提升中国的城市与地方政府的气候治理能力;(4)在国际合作中,利用非国家行为体的优势推动中国所提出的南南气候合作倡议及相关项目的落实,进一步提升中国气候治理的话语权,并弥补资金、技术及能力建设上的不足。     

Air quality research: perspective from climate change modelling research

A major component of climate change is a manifestation of changes in air quality. This paper explores the question of air quality from the climate change modelling perspective. It reviews recent research advances on the cause-effect relationships between atmospheric air composition and climate change, primarily based on the Intergovernmental Panel on Climate Change (IPCC) assessment of climate change over the past decade. There is a growing degree of confidence that the warming world over the past century was caused by human-related changes in the composition of air. Reliability of projections of future climate change is highly dependent on future emission scenarios that have been identified that in turn depend on a multitude of complicated interacting social-economic factors. Anticipated improvements in the performance of climate models is a major source of optimism for better climate projections in the future, but the real benefits of its contribution will be closely coupled with other sources of uncertainty, and in particular emission projections.     

Developing indicators of ecosystem condition using geographic information systems and remote sensing

Improvements in remote sensing technologies and the use of geographic information system (GIS), are increasingly allowing us to develop indicators that can be used to monitor and assess ecosystem condition and change at multiple scales. This paper presents global- and regional-level indicators developed by the World Resources Institute and collaborating partners using remote sensing and GIS. Presented as regional and global maps, these spatial indicators are ideal communication tools to raise awareness of the condition of the Earths ecosystems among different audiences. Global and regional spatial indicators not only inform us about the current condition of, and pressures on, ecosystems, but also about the likely capacity of the ecosystem to continue to provide goods and services to future generations. The increasing focus on integrating socio-economic and biological information with remote sensing and GIS technology can only help to further our understanding and capacity to manage ecosystems in a more sustainable manner.The author researched and wrote this paper while working for the World Resources Institute (WRI).     

Design concept for an ecological relaxing textile product using solar energy

We can enhance our quality of life and reduce environmental impacts by making improvements in textile product design. By thinking about the environment when we design, choose and use technology, we can play an important part in building a better world for the future. If we are going to live in a sustainable way, the technology that we use has to be sustainable.

This paper provides an insight into how the design of textile products could provide for a more sustainable future. It describes a design concept for an ecological relaxing textile that uses photovoltaic cells to collect and store solar energy and to power an electronic relaxing system. This design may help improve our quality of life now and in the future.

The raw materials and processes, the electronic devices and the dimensions of solar energy for this application are analysed from an environmental perspective. The solar relaxing textile can facilitate our daily life by providing increased comfort and well being, and also acts as an indirect message to use renewable energy within textile support, in order to preserve our ecology.     

中国电力系统低碳转型的路径探析——基于社会技术转型思路

社会技术转型的多层视角(MLP)是转型理论的最新进展,它认为转型是由三个层面——微观层的技术利基,中观层的社会技术体制和宏观层的大环境——相互作用引起的一个非线性的演化过程。该思路通过分析技术和社会因素之间的互动关系,寻求理解社会技术体制的长期变化。本文以MLP为分析思路,研究我国电力系统现行体制已经发生的动态变化;并从短期,中期和长期三个时间维度,对我国低碳电力系统转型路径提出一个概念性的分析框架。短期的转变路径,延续和发展现有体制结构和治理模式,通过体制内行为主体有意识地调整创新活动和发展的方向,来解决体制内部矛盾和压力,实现政府2020年的减排目标和可再生能源目标。中期的重构路径,基本实现电源结构实质性改变,火力发电比例逐步下降,可再生能源发电对其主导地位形成冲击和挑战,电力系统呈现百花齐放百家争鸣之势态。长期的重置路径通过新的低碳能源技术创新的质的突破和飞跃,实现高煤高碳的电力体系由新的低碳体制取代这一长期目标。本文从理论和方法上丰富了目前我国低碳转型的讨论,对政策制定者和相关的行为主体也可提供一种有益的参考。     

An agent-based model of groundwater over-exploitation in the Upper Guadiana, Spain

Irrigated agriculture is a main user of groundwater. Achieving a sustainable use of groundwater will often require agricultural land-use changes such as shifting to entirely different kinds of crops and/or technologies. Enhanced understanding of land-use change is hence required for developing policies for a sustainable water future. We use an agent-based model to investigate the history of irrigated agriculture in the Upper Guadiana Basin, Spain, in order to learn about the influence of farmers’ characteristics on land-use change and associated groundwater over-use. A shift from vineyards and cereals to horticultural crops would provide a possibility for higher income with less water use. Such a shift cannot be observed historically. The model results suggest that risk aversion and path dependency are insufficient to explain this observation, and the organisational set-up of farms limiting the maximum labour force needs to be considered as additional explanatory factor. Furthermore, it is shown that different types of farms existing in the UGB can be expected to exhibit distinct responses to drivers of land-use change such as agricultural policies. It is concluded that a sound understanding of the social system making use of a resource is required to solve problems of resource over-use. This article demonstrates that agent-based models can be useful tools to enhance such an understanding even in situations of scarce and uncertain data that are often encountered when dealing with resource-use problems.     

Can Sustainable Agriculture Feed Africa? New Evidence on Progress, Processes and Impacts

Africa faces enormous food security challenges. Most commentators agree that, despite the complexities of food insecurity, there will have to be increases in food production from existing agricultural land. Most, too, are pessimistic about the future, judging likelihood of success on the basis of past performance of modern agricultural development. Sustainable agriculture, though, offers new opportunities, by emphasising the productive values of natural, social and human capital, all assets that Africa either has in abundance or that can be regenerated at low financial cost.This paper sets out an assets-based model of agricultural systems, together with a typology of eight improvements that are currently in use in sustainable agriculture projects. In the 45 projects/initiatives spread across 17 countries that are investigated, some 730,000 households have substantially improved food production and household food security. In 95% of the projects where yield increases were the aim, cereal yields have improved by 50–100%. Total farm food production has increased in all. The additional positive impacts on natural, social and human capital are also helping to build the assets base so as to sustain these improvements in the future.This analysis indicates that sustainable agriculture can deliver large increases in food production in Africa. But spreading these to much larger numbers of farm households will not be easy. It will require substantial policy, institutional and professional reform.     

Eco-design improvement for the diaphragm forming process

This paper proposes an eco-design method to suggest improvements over an existing diaphragm forming process (DFP). In the proposed method, a systematic procedure is developed to provide eco-design guidance to engineers, and it includes four steps. In Step 1, design functions are analysed through functional diagrams to provide the information of sub-functions and functional flows. In Step 2, the eco-design requirements are captured via quality functional deployment (QFD) and then translated to design functions via functional analysis (FA). Then, the design functions are prioritized according to the eco-design requirements in considerations. In Step 3, the prioritized design functions are used to generate possible design concepts through the morphological chart. In Step 4, the generated concepts are assessed based on the energy use and process time of DFP. The utility of the proposed method is to adapt quality tools for continual improvements in the context of eco-design. An existing DFP is used for this work to demonstrate and validate the method’s applicability. The result of this research shows that the integration of QFD and FA can systematically guide the generation of new eco-design concepts for DFP with less dependence of design intuitions.     

Specifying information needs: improving the working methodology

Specification of information needs is an important step in the design of monitoring networks. Within the framework of Monitoring Strategy 2000+, a programme of the Dutch Directorate General of Public Works and Water Management (Rijkswaterstaat) which seeks to provide innovation in the monitoring sector, a method has been developed to link water management policy to monitoring through specification of information needs. Over the past 2 years, this method has been applied in several projects within the Rijkswaterstaat organisation. Use of this method has led to improvements in the monitoring practice and was judged very positively by the people involved. Nevertheless, the main obstacle to employing the method was the actual translation of policy matters into information products. A special study is carried out, focusing on this aspect within the method, to provide the participants of a project with a mental framework that enables them to clearly specify their information needs. The major requirements for this mental framework are that all participants have a clear view of the process (system), and that they are able to relate their contribution to this process and to the contributions of others (transparency). The first step of the process is to focus the attention of stakeholders on the information they will actually need for decision-making. The next step is to confront the different expressed opinions through the method of the 'devil's advocate', which implies criticising the results of the first step by finding as many as possible arguments against these opinions. This should force the stakeholders to better specify their arguments. The method, its improvements and the results of one pilot project will be discussed in this paper. Electronic Publication     

Design standards for product end-of-life processing

In 2006, the British Standards Institute (BSI) published BS 8887-1 ‘Design for Manufacture, Assembly, Disassembly and End-of-life processing’ (MADE) subtitled ‘General Concepts, Processes and Requirements’. This was the first British Standard to address design for efficient post-consumer product reprocessing. By designing and planning for remanufacture, much of the embodied energy and production investment can be retrieved after the consumer no longer requires the original item. Therefore, end-of-life products become an asset rather than a liability. Design for disassembly facilitates efficient deconstruction and thus enables materials to be recycled with minimal loss of purity, thus maximising their value. The analysis presented here is based on the Standard Industrial Classification codes of companies and organisations that have purchased BS 8887-1. These data are considered in relation to the influence of environmental legislation. Company age, size and location, as well as ISO 9001 and ISO 14001 certifications, are discussed. This paper concludes by suggesting suitable directions for the continued distribution and development of this environmentally, economically and socially beneficial standard.     

Green and compatible industrial development in Western China

Western China has lagged a lot in terms of industrial structure and economic development,compared with the national average.And China announced its target of CO_2 emission reduction,i.e.by 2020,CO_2 emission per GDP will drop by40-45%compared with 2005.The target will be incorporated into China's long-term industrial planning.Against this background,this paper will make a comprehensive examination of the industrial development of Western China,aiming to discover a green and compatible way.First,we analyze the spatiotemporal evolution of regional industrial structure for the period 2000-2010.Second,we try to discover the industrial structure optimization path for Western China by employing the Vector Auto Regression model.Lastly,we try to provide some advice and suggestions for further industrial development in Western China.Our examination shows that further industrial development in Western China should pay full attention to resource conservation and recycling,and develop on a green and compatible path.     

Examining Environmental Kuznets Curve for river effluents in India

This study aims to determine the trade-off between river pollution and the growth of the economy in the context of India using the concept of Environmental Kuznets Curve (EKC). According to EKC theory, environmental pressure tends to rise faster than income growth in the early stages of economic development and then declines in the later stages with further economic growth. The present study has used the cross-sectional time series data for river pollutants of Biochemical Oxygen Demand (BOD) and Dissolved Hydrogen Ions (PH) across various states of India for the period 1990–1991 to 2005–2006. This study shows why the conventional EKC model is not sufficient to ascertain the declining path of pollution as the economy grows in the second stage. The paper uses the modified EKC theory where the EKC curve is proposed to have 2 turning points. Our results indicated ‘tilted-S shaped’ relationship which contradicts EKC in the early stages. Most of the regions that were studied have crossed the first turning point but are still to cross the second turning point, which means that there will be an ascent in the pollution level in the future. This calls for more stringent environment policies complementing the desired growth path.     

少数民族贫困地区生态文明建设路径选择及优化

摘 要：少数民族贫困地区由于其地理条件、人文环境和经济发展等因素制约,生态文明建设更为艰巨。从人口、社会、经济、资源、环境5个子系统构建该地区生态文明建设系统动力学模型,通过调节14个控制变量设计5条路径,模拟2018~2030年生态文明建设的演变趋势。结果表明：（1）协调发展路径更能促进生态文明建设。但该路径模拟结果显示2020年后资源供需平衡指数与生态环境质量下降,利用耦合协调模型检验得出该路径2018~2030年间人类与自然系统未达到真正协调,需进一步优化路径;（2）根据该地区经济发展与资源供需间的矛盾,设计了以加快资源开发为主的优化路径Ⅰ和在放缓经济增长速度的同时加大资源开发力度的优化路径Ⅱ,其中优化路径Ⅱ耦合度较高,能够更好地帮助该地区摆脱经济发展与内外部资源支撑不足的困境,故将其确定为有效路径。研究发现,该地区资源开发、环境保护任务艰巨,在完成脱贫任务的同时,需要适当调整经济增长速度保证与其资源环境间的协调发展。我们认为提升脱贫的内生动力、发展多元经济、提高资源利用率、增强生态环境保护是今后工作的重点。