Environmental and economic viability of Alkali Activated Material (AAM) comprising slag,fly ash and spent coffee ground

ABSTRACT

This paper presents a concept of reusing spent coffee ground (CG) as a construction material. Through creating a CG-filled Alkali Activated Material (AAM) with industrial wastes such as fly ash (FA) and slag (S), a strong recycled material was synthesised and found suitable to be used as a road subgrade fill material. Potential groundwater contamination tests were done in accordance to the Australian Standard Leaching Procedure (ASLP). The environmental analysis done on this green material shows that albeit being composed of various industrial wastes and chemicals, CG-filled AAMs in the ground will not cause adverse environmental impacts to surrounding soils and groundwater. Heavy metals and cyanide leached from the AAMs were well below hazardous thresholds. Comparing the carbon footprint of CG, it is found that recycling CG into a construction material would reduce the nett global carbon emission by reducing dependency on quarried material. Cost analyses done on CG-filled AAMs show that these AAMs are expensive to produce relative to traditional construction materials. However, as recycling technology is progressively advancing, in the future the economic value of CG-filled AAM may increase to match those of contemporary construction materials.     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.     

Construction and demolition waste generation in cities in India: an integrated approach

ABSTRACT

This paper quantifies construction and demolition waste (C&DW) generation rate in Indian cities using bottom-up material flow analysis approach. A dynamic model was applied to different classes of cities in India to investigate how C&DW generation rate varies across different classes of cities. The data on construction and demolition activities in different classes of cities were estimated from information reported in secondary literature. The results show that urban areas in India generated over 150 million tonnes of C&DW in 2016, and almost 50% of waste was generated in small to medium towns. The paper concludes with discussion on opportunities for recycling of C&DW and closing the material loops in Indian cities.     

Carbon footprint of recycled biogenic products: the challenge of modelling CO2 removal credits

Current carbon footprinting (CF) and life cycle assessment (LCA) methods do not treat recycled biogenic carbon adequately, because the calculation rules for recycled products and biogenic carbon stored in products are defined independently from each other. Therefore, an improved and consistent calculation rule for the CF of product systems containing both recycling processes and carbon stored in products is proposed. The methodological approach consists of the application of the same allocation principles for both greenhouse gas (GHG) releases and GHG removals: (1) explicit accounting of inputs (GHG removals) and outputs (GHG releases) of biogenic carbon flows instead of assuming carbon neutrality per se; (2) consistent application of allocation rules for environmental benefits and environmental burdens. It is shown that the different modelling approaches (e.g. polluter pays, conservative or partitioning) lead to different results in LCA and CF calculations, e.g. the GHG emissions of first life cycle of the product system calculated here range between ? 1.6 units in the polluter pays approach and 4 units in the conservative approach. It is shown that the currently common modelling is an average approach for primary biogenic material, a worst-case approach for recycled biogenic material and a best-case approach for disposed biogenic material. This paper proposes to improve the currently developed standards for CF by adding a requirement to the goal and scope definition phase that ensures the consistent and transparent documentation, how biogenic carbon removal credits are allocated between life cycles.     

Recovery and characterisation of carbon fibres from waste CFRP using supercritical n-butanol

ABSTRACT

The high-performance carbon fibres can be recycled from waste carbon fibre/epoxy resin composites by supercritical n-butanol. Recycling experiment designed by response surface method was used to investigate quantitative relation between degradation rate of epoxy resin and process parameters. Thus, the optimum process parameters could be obtained, and effects of process parameters and layers on degradation rate and mechanical performance of the recycled carbon fibres were analysed. The tensile strength of the recycled carbon fibre under the optimum process parameters was 94.53% of that of the original carbon fibre, tensile modulus was 93.57% of that of the original carbon fibre and interfacial shear strength was 90% of that of the original carbon fibre.     

Development and analysis of high-performance green concrete in the urban infrastructure

Cement production accounts for approximately 5% of total global CO₂ emissions from all human activities. In addition, the consumption of virgin aggregates for concrete infrastructure has created virgin material scarcity issues in many areas of the USA. High-performance green concrete (HPGC) with fly ash and recycled aggregates can help reduce the demand for material inputs and reduce pollution outputs associated with bulk material flow of urban concrete. Structural and durability tests showed that HPGC containing fly ash and 50% recycled aggregate (100% of the coarse aggregate fraction) performed equally or better than 100% ordinary Portland cement concrete with the same cementitious content. Durability improvements were more significant with Class F than Class C fly ash. For both Class F and Class C fly ash, greater per cent replacement of Portland cement with fly ash led to slower and lower strength gain, but still within acceptable strength criteria for Colorado Department of Transportation Class B concrete. This paper quantifies the sustainability of HPGC in urban infrastructure by addressing structural performance, environmental, economic and resource depletion impacts.     

“The End of the Ice Age?”: Disappearing World Heritage and the Climate Change Communication Imperative

Rapid environmental change in vulnerable destinations has stimulated a new form of travel termed “last chance tourism” (LCT). Studies have examined the risks of LCT, while leaving potential opportunities within this new tourism market largely underexplored. Results of survey (n?=?399) research in Jasper National Park, Canada reveal that a LCT motivation influences decisions to visit this iconic Canadian destination, and suggest that this motivation is linked to a desire to learn about the impacts of climate change on the Athabasca Glacier. Findings suggest there may be short to medium term opportunities associated with LCT, including promoting climate change ambassadorship through management interventions. This paper discusses a range of possible education, interpretive, and outreach activities that might be employed at LCT destinations. It outlines the relative merits (or what we refer to as “uneasy benefits”) of promoting the glacier and other LCT destinations within a protected areas management and climate change adaptation context.     

A cross-border recycling system in Asia under the resource and environmental constraints: a challenging project by the city of Kitakyushu and the city of Tianjin

In this article, we present an overview of the current circumstances of the trade of recyclable resources, i.e. end-of-life products, parts and materials, and recycled resources in Asian countries, indicating that pollution potential is spreading there due to the improper handling of those resources. Conversely, Japan’s domestic recycling activities are shown to be adversely affected by the increasing outflow of those resources on one hand and the sudden stagnation of trade on the other. Considering that cross-border resource circulation in Asia is unavoidable and desirable in certain conditions, we propose a feasible and sustainable transaction scheme of recyclable and recycled resources, exemplified by a project which was carried out by the city of Kitakyushu and the city of Tianjin.     

Canadian Weathercasters’ Current and Potential Role as Climate Change Communicators

ABSTRACT

Climatologists worldwide are calling for urgent action to manage climate change, but public engagement remains a significant challenge. This lack of engagement is often attributed to psychological distance: climate change is perceived as something happening far away, to other people, or in a hypothetical future. TV weathercasters are ideally situated to communicate the geographically and temporally proximate impacts of climate change and increase public engagement. This study explores the status of climate change reporting amongst weathercasters in Canada, where no such research has been conducted. The respondents suggested that many, but not all, weathercasters are engaged with climate change and interested in presenting local, climate-related content; however, their on-air climate change communication behavior is highly limited. This analysis builds on research conducted with American weather broadcaster by indicating that Canadian weathercasters share their potential as effective climate change communicators, but are highly uncertain about their capacity to support this role.     

Study of fluxing in Al refining process by rotary and crucible furnaces

The process used to obtain recycled Al alloys depends on the scrap quality. Rotary furnaces are normally used in Europe as they allow a great productivity and they can process low quality scrap using a salt flux to protect the molten metal from oxidation. In this article, the effect of the quantity of salt on the metal recovery has been experimentally investigated by melting several types of scrap under a mixture of NaCl–KCl–Na₃AlF₆ salts. The quantity of salt has been related to the salt factor (SF), which is the ratio between the non-metallic content in the scrap and the quantity of salt required. The same levels of salt factor have been tested by melting the scrap in rotary and crucible furnaces. The metal recovery increases with the salt content for both furnaces. The results obtained with the different melting processes are comparable because the yield difference is similar considering different salt factors. Crucible furnace gives greater metal recovery but it cannot replace rotary furnace in Al refining industry due to lower melting capacity. However, the results highlight that the optimisation of the Al refining process can be supported by preliminary tests through crucible furnaces reducing the time and material consumptions.     

The role of the clean development mechanism in achieving China��s goal of a resource-efficient and environmentally friendly society

This paper examines the impact of the clean development mechanism (CDM) on China??s progress in building a resource-efficient and environmentally friendly society, referred to as a dual-goal society. It presents China??s CDM activities from the perspective of policy directions, administrative arrangements and capacity building as well as outlines the regional trends and distribution of CDM projects across China??s 30 provinces. Based on regression analysis of 2006?C2009 panel data, the research was able to provide estimates at provincial level of the impacts of CDM activities on China??s CO₂ emission intensity, SO₂ emission intensity and industrial dust emission intensity. The study concludes that the active CDM projects are mainly located in the less-developed central and west China where they have provided increased opportunities for sustainable development. Furthermore, the successful implementation of CDM projects across the country has significantly decreased the emission intensity of CO₂, SO₂ and industrial dust, which means that these activities have enhanced China??s ability to build the desired dual-goal society.     

Ecological and economical assessment of end‐of‐life waste recycling in the electrical and electronic recovery sector

Technological innovation and shorter product life cycles of electrical and electronic equipment coupled with their rapidly growing applications have resulted in the generation of an enormous amount of waste from electrical and electronic equipment (WEEE). To address the potential environmental problems that could stem from improper end‐of‐life management of WEEE, many countries have drafted national legislation to improve the reuse, remanufacture and material recycling from WEEE, and to reduce the amount of such waste going to landfills. With the introduction of such legislation comes an increased need for the recovery operators to evaluate the recycling costs and environmental benefits of reclaimed products and materials in order to select the most appropriate end‐of‐life options for individual products in WEEE. This paper presents a systematic methodology for ecological and economical assessment to provide a holistic understanding of the impacts associated with different end‐of‐life options for such waste. This assessment, in addition to providing decision‐support for the selection of the best possible end‐of‐life option for a particular product in WEEE, could also generate vital information to support the design and material selection processes during the initial product development activities. The assertion made is that the detailed considerations of the ecological and economical impacts associated with different end‐of‐life options will significantly improve the recovery and recycling of WEEE.     

An economic-environmental analysis of selected barrier-coating materials used in packaging food products: a Swedish case study

The purpose of a barrier coating in food packaging is primarily to increase the shelf life of the foodstuff contained within the packaging, preserve its colour, odour, taste and quality, and thereby reduce food wastage (both at retail outlets and households). While most publications hitherto have compared packaging and barrier-coating materials on the basis of their environmental impacts alone, this paper adopts a more holistic approach by factoring in the economic aspect as well. Four barrier material alternatives—starch, polyethylene, EVOH + kaolin and latex + kaolin are analysed. Two well-defined end-of-life handling scenarios, relevant to Sweden, are: one in which everything except starch is recycled, with starch being composted, and the other in which everything is incinerated. Among the several environmental impact categories which can be analysed, this paper considers only global warming. Two approaches are tested to combine the economic and environmental aspects—normalisation, weighting and aggregating on the one hand, and using the carbon tax to internalise the externality caused by GHG emissions on the other. For the set of weighting factors obtained thanks to a survey conducted by the authors (40.6% for environmental and 59.4% for economic), starch emerges as the most sustainable alternative, followed by polyethylene for both the end-of-life handling scenarios. This tallies with the result obtained by using the carbon tax for internalisation of the externality. The case study, methodology and results presented in this paper, will hopefully be a springboard for more detailed studies of this nature, under the umbrella of sustainability.     

Progress in Enclave Tourism Study of Overseas: A Literature Review

Abstract

In response to the “isolated island” phenomenon emerging from the development of tourist resorts in China, this paper reviews the study of enclave tourism overseas, which has similar features to the resort “island”. Based on the literatures related to enclave tourism from Tourism Management and Annals of Tourism Research, this paper reviews the study of enclave tourism from the following aspects: definition discussion, theories used, causation of enclaves, characteristics and impacts of enclave tourism. The understanding of the overseas researches on enclave tourism would provide instructions for the study on the problems of Chinese resorts, such as enclavity and “island effects”, and suggest measures for the sustainable development of resorts in China. This paper is divided into three sections. Section 1 briefly introduces the development of enclave tourism in developing countries and the outline of enclave tourism study. Section 2 elaborates on the contents of enclave tourism research and gives deep insights into the study on concepts, characteristics, causations and effects respectively, which is the key part of this paper; Section 3 concludes the review and proposes suggestions for the enclave tourism study in China.     

The influence of resource strategies on childhood phthalate exposure—The role of REACH in a zero waste society

The present study aims to investigate how resource strategies, which intend to reduce waste and increase recycling, influence on human exposure to hazardous chemicals from material recycling. In order to examine the flows of hazardous chemicals in recycled material, a mass flow analysis of plastics and paper at European level, including the flow of phthalates, i.e. di(2-ethylhexyl) phthalate (DEHP), di-n-butyl phthalate (DBP), and benzyl-butyl phthalate (BBP), has been performed. The result for the year 2012 shows that 26% of plastic wastes and 60% of paper consumed in Europe were recycled. This corresponds to the finding that approximately 4% of DEHP and BBP and 18% of DBP annual demands in Europe as raw material re-enter the product cycle with recycled plastics and paper. To examine the potential contribution of the phthalate exposure through recycled plastics and paper, a case study assessing the childhood exposures to phthalates from foods packed in recycled paper and plastics has been performed for 2-year-old children in Denmark. The result verifies that an increase in recycled paperboard and PET bottles in food packaging material causes a significant increase in childhood exposure to DBP corresponding to an additional exposure of 0.116–0.355 μg/kg bw/day; up to 18% of the total DBP exposure in Danish 2-year-olds. While most of the DEHP exposure can be explained, more than 50% of DBP and 70% of BBP exposure sources still remain to be identified. Finally, a conceptual framework for a circular economy based on sustainable and clean resource flows is proposed in order to increase material recycling without increasing adverse health effects.     

Climate Change Impacts and Adaptation Strategies in Kenya

Abstract

To determine the climate changes that are due to natural variability and those due to human activities is quite challenging, just like delineating the impacts. Moreover, it is equally difficult to ascertain the adaptive strategies for coping with the climate changes and in particular for developing countries like Kenya. While climate change is a global phenomenon, the impacts are more or less specific to local areas such as observed in Kenyan case. Therefore climate change impacts adaptation strategies are appropriately applicable to a given local perspective. The study investigated the main indicators of climate change and effective adaptive strategies that can be employed in Kenya. Based on online questionnaire survey, the study established unpredictable rainfall patterns as the major indicator of climate change in the country, while water harvesting and change of cropping methods are the best adaptive strategies.     

Urbanization in Western China

China has experienced considerable urbanization in the past 60 years,especially since the implementation of the Economic Reform and Opening-up Policy in 1978.In 1949,there were only 132 cities with an urban population of 27.4 million,while in 2008 China had 652 cities with a total urban population of 606 million.Such urbanization is attributed to the boost in the number of cities and the urban population.Urban expansion enhanced geographic inequality between the three major regions in China.Compared with the eastern and central regions,western China only has 19%of the total cities and 18%of the urban population.The urbanization rate was 37.2%for the western region in 2008,while it reached 53.3%for the eastern regions and 45.3%for central China.Using a geographic information system(GIS)and statistical analyses,this study aims at explaining the structure and spatial development of urbanization,and highlighting the current issues of urban inequality in western China during the past two decades.The paper drew following conclusions:(1)Urbanization disparities between eastern and western China have become increasingly obvious,but seem to be evolving slowly since the establishment of the government’s Western Development Priority Policy in 2000.(2)Cities of various sizes were expanded in western China,and the main factors affecting the urbanization are population numbers and density,government investment and geographic conditions.(3)Current patterns of urbanization in the western region are distributed unevenly between provinces.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

An exploration of the potential for re-distributed manufacturing to contribute to a sustainable,resilient city*

Abstract

Re-distributed manufacturing (RDM), broadly described as manufacturing done at a smaller-scale and locally, could be beneficial to business and urban society through creating jobs, reducing the environmental impacts of production, and improving resilience to future disturbances. Consideration of RDM within a city-region requires the consideration of a wide range of issues – societal, technical, economic and environmental. This paper presents the results of a study into the potential for RDM to contribute to a sustainable, resilient city in the face of a range of expected future disturbances on the city and on manufacturing sectors. The study took an integrated assessment approach which incorporated the development of a conceptual framework; a ‘strawman’ causal loop diagram which was reviewed by participants in a workshop; and a stock and flow system dynamics model that represents our understanding about the structure and behaviour of urban manufacturing. Several key themes emerged: similarities between RDM and traditional manufacturing, availability of physical space for RDM to be done, achieving urban resilience through RDM by enabling responsiveness to disturbances, changes in environmental impacts from production, additions or losses in jobs, the competitiveness of local manufacturing, and skills and innovation for RDM technologies. Further work is recommended.     

Cleaner production solution selection for paper making – a case study of Latif paper products Co. Iran

Abstract

The objective of this research is to design an approach for selecting appropriate solutions to efficiently and productively reduce environmental pollution and water, energy and raw material consumption in a recycled paper manufacturing facility, the paper mill in Latif, Iran. To reach this goal, we develop a decision-making model using the Analytic Hierarchy Process (AHP). The proposed model provides a framework for cleaner production implementation specific to the paper industry. Pairwise comparisons of the results of designed questionnaires resulted in the hierarchy model being divided into five major groups: production modification; process change; preventive maintenance; renewal; and manpower resources.These five groups include 31 sub-criteria and seven alternatives. The results showed that process change yields the highest priority among the main criteria and that industrial automation and its technology level gives the highest priority among sub-criteria. Regarding the alternatives, reduction of environmental pollution is the most important solution for cleaner production in the industry. Also, product modification is the most sensitive criterion affecting the alternatives priority.