Concentrating solar power in a sustainable future electricity mix

The capacity of a concentrating solar thermal power (CSP) plant can be considered flexible and firm, just like that of a conventional steam cycle power station. Periods without sunshine can be bridged by thermal energy storage or fuel, enabling a CSP plant to deliver power on demand at any time. To this technical quality is added the economic quality of electricity costs that will be stable for a lifetime because they are mainly composed of capital costs, spare parts and personnel. CSP is competitive with power from fuel oil and moving to break even in costs with natural gas by around 2020 and steam coal by around 2025. Carbon dioxide emissions of 10–40 tons/GWh, land use of 250–550 m²/GWh and water consumption of 250 m³/GWh (using dry cooling) compare favorably with other energy sources. Environmental benefits, the technical imperative of firm and at the same time flexible power supply, and the economic targets of affordability and cost stability are the main reasons for a significant role for CSP in a sustainable future electricity mix. Two case studies show the different roles CSP can play north and south of the Mediterranean Sea, in one case importing CSP to Germany for flexible power and in the second case using CSP in Jordan to provide firm and at the same time renewable power capacity for the quickly growing electricity demand.     

Performance assessment of 20.4 kW eco-house grid-connected PV plant in Oman

ABSTRACT

The aim of this article is to analyse the performance of the Photovoltaic (PV) and to study the effect of soiling on the energy generation under Muscat environmental conditions. The generated energy is consumed in the eco-house, and the access energy is fed back to the electric grid. Two-ways metre was used to record the energy taken from the grid or fed back to the grid. The system was monitored from December 2014 until today. Various performance parameters of the plant were evaluated which include system efficiency, performance ratio (PR), capacity factor (CF) and different types of PV system losses and yields. The annual average values of recorded ambient temperature and solar radiation were 32°C and 482 W/m², respectively.

The total annual energy produced was 23,595 kWh, whereas the annual average daily reference yield, array yield and final yield were 5.59, 3.78 and 3.64 kWh/kW_P/day, respectively. The annual average daily PR and CF were 0.67 and 0.15, respectively, while the annual average system efficiency was 10.3%. Furthermore, the annual average daily capture, system and cell temperature losses were 1.82, 0.14 and 2.95 h/day,respectively, with a small reduction in energy production when modules left uncleaned.     

Exploitation of renewable energy resources for environment‐friendly sustainable development in Saudi Arabia

The recent increase in energy costs, driven by a surge in oil prices, has increased world‐wide efforts on the exploitation of renewable/wind energy resources for environment‐friendly sustainable development and to mitigate future energy challenges. Moreover, experience in the wind energy industry has reached high levels in the field of manufacturing and application. This inevitably increases the merits of wind energy exploitation. In order to exploit wind resources, through the establishment of wind power plants, specific attention must be focused on the characteristics of wind and wind machines. The literature indicates that wind‐energy resources are relatively better along coastlines. In the present study, long‐term hourly mean wind speed data for the period 1986–2003, recorded at Dhahran (Eastern Coastal region, Saudi Arabia), has been analysed to examine the wind characteristics including (but not limited to): yearly/monthly/diurnal variations of wind speed, frequency distribution of wind speed, impact of hub‐height/machine‐size on energy production, etc. Data have been checked/validated for completeness. Data analysis indicated that long‐term monthly average wind speeds ranged from 3.8 to 5.8 m/s.

Concurrently, the study determined monthly average daily energy generation from different sizes of commercial wind machines (150, 250, 600 kW, etc.) to assess the impact of wind machine size on energy yield. The study also estimated annual energy production (MWh/year) from wind farms of different capacities (3, 6, 12, 24 MW, etc.) by utilising different commercial wind energy conversion systems (WECS). It was observed that, for a given 6 MW wind farm size, a cluster of 150 kW wind machines (at 50 m hub‐height) yielded about 32% more energy when compared to a cluster of 600 kW wind machines. The study also estimated the cost of wind‐based electricity (COE, US$/kWh) by using different capacities of commercial WECS. It was found that the COE per kWh is 0.045 US$/kWh for 150 kW wind machine (at 50 m hub‐height) whereas COE was 0.039 US$/kWh for 600 kW wind machine (at 50 m hub‐height). The study also dealt with wind turbine characteristics (such as capacity factor and availability factor). These characteristics are important indicators of wind turbine performance evaluation.     

Economic feasibility of autonomous hybrid wind–diesel power systems for residential loads in hot regions: a step to mitigate the implications of fossil fuel depletion

Today, energy occupies a pivotal position around which all socio-economic activities revolve. No energy means no life, and supply of energy in a cheap, plentiful, long-sustainable and environmentally safe form is a boon for everyone. In the light of rising cost of oil and fears of its exhaustion coupled with increased pollution, the governments worldwide are deliberating and making huge strides to promote renewable energy sources such as wind. Integration of wind machines with the diesel plants is pursued widely to reduce dependence on fossil-fuel-produced energy and to reduce the release of carbon gases that cause global climate change. The literature indicates that commercial/residential buildings in the Kingdom of Saudi Arabia (KSA) consume an estimated 10–40% of the total electric energy generated. The aim of this study is to analyse wind-speed data of Dhahran (East-Coast, KSA) to assess the economic feasibility of utilising autonomous hybrid wind–diesel power systems to meet the electrical load of 100 typical residential buildings (with annual electrical energy demand of 3512 MWh). The monthly average wind speeds range from 3.3 to 5.6 m/s. The hybrid systems simulated consist of different combinations of 600 kW commercial wind machines supplemented with diesel generators. The National Renewable Energy Laboratory's hybrid optimisation model for electric renewables software was employed to perform the techno-economic analysis.

The simulation results indicate that for a hybrid system comprising 600 kW wind capacity together with a 1.0 MW diesel system (two 500 kW units), the wind penetration (at 50 m hub-height, with 0% annual capacity shortage) is 26%. The cost of generating energy (COE, $/kWh) from this hybrid wind–diesel system was found to be 0.070 $/kWh (assuming diesel fuel price of 0.1 $/l). The study exhibits that for a given hybrid configuration, the number of operational hours of diesel generator sets (gensets) decreases with an increase in the wind-farm capacity. Concurrently, emphasis has also been placed on wind penetration, un-met load, effect of hub-height on energy production and COE, excess electricity generation, percentage fuel savings and reduction in carbon emissions (relative to diesel-only situation) of different hybrid systems, cost breakdown of wind–diesel systems, COE of different hybrid systems, etc.     

A method to derive the relationship between the annual and short-term air quality limits—Analysis using the WHO Air Quality Guidelines for health protection

The World Health Organization (WHO) Air Quality Guidelines (AQG) were launched in 2006, but gaps remain in evidence on health impacts and relationships between short-term and annual AQG needed for health protection. We tested whether relationships between WHO short-term and annual AQG for particulates (PM₁₀ and PM_2.5) and nitrogen dioxide (NO₂) are concordant worldwide and derived the annual limits for sulfur dioxide (SO₂) and ozone (O₃) based on the short-term AQG. We obtained air pollutant data over seven years (2004–2010) in seven cities from Asia-Pacific, North America and Europe. Based on probability distribution concept using maximum as the short-term limit and arithmetic mean as the annual limit, we developed a new method to derive limit value one from another in each paired limits for each pollutant with capability to account for allowable exceedances. We averaged the limit derived each year for each city, then used meta-analysis to pool the limit values in all cities. Pooled mean short-term limit for NO₂ (140.5 μg/m³ [130.6–150.4]) was significantly lower than the WHO AQG of 200 μg/m³ while for PM₁₀ (46.4 μg/m³ [95CI:42.1–50.7]) and PM_2.5 (28.6 μg/m³ [24.5–32.6]) were not significantly different from the WHO AQG of 50 and 25 μg/m³ respectively. Pooled mean annual limits for SO₂ and O₃ were 4.6 μg/m³ [3.7–5.5] and 27.0 μg/m³ [21.7–32.2] respectively. Results were robust in various sensitivity analyses. The distribution relationships between the current WHO short-term and annual AQG are supported by empirical data from seven cities for PM₁₀ and PM_2.5, but not for NO₂. The short-term AQG for NO₂ should be lowered for concordance with the selected annual AQG for health protection.     

Research on the development and planning of renewable energy in Tibet

With the rapid social and economic development of the Tibet Autonomous Region,the situation in regard to energy supply and demand is increasingly tense.Meanwhile,the development of renewable energy in Tibet has been given considerable practical significance by its peculiar ecological environment.Given the complementarity of renewable energies in Tibet,using the method of factor analysis,we derived four major factors:level of economic development,social development,industrial development,and energy endowment,which help to evaluate development conditions in different regions of Tibet.Treating these four factors equally,we used the hierarchical clustering method to determine the order of regional development.Thus we acquire a three-stage planning project for renewable energy.In the first stage,Lhasa plays a leading role in promoting the development of renewable energy,particularly that based on solar and wind energy.There are two phases in the second stage,the first being to simultaneously develop solar and wind energy in Xigaze and Nyingchi.The second is to develop solar and wind energy in accordance with the time of year in Qamdo,Nagqu,and Ali,with 1.145billion kWh electricity to be generated.The third stage is to develop energy production in Lhoka Prefecture,with 1.369billion kWh electricity to be generated.At the end of the three-stage project,consumption of available electricity will have reached 4.045 billion kwh,with major social and economic benefits.     

Performance evaluation of solar photovoltaic electricity-generating systems: an Indian perspective

The present work seeks to assess the sustainability of different solar photovoltaic (SPV) electricity-generating systems based upon energy, environment and economics. The sustainability indicators evaluated for energy, environment and economics are electrical output, life-cycle greenhouse gas (GHG) emissions and life-cycle cost of electricity generated per kilowatt hour. The selected SPV-based electricity generation technologies for sustainability evaluation are amorphous, monocrystalline and polycrystalline at different locations and tilt angles across India. For SPV systems, most of the emissions are the result of electricity use during manufacturing. In these cases, an average grid mix for the region of manufacture is typically used to calculate energy use and emissions. Based upon these three indicators, a figure of merit (FM) has been proposed. The results proposed that polycrystalline gives the maximum electrical output, minimum GHG emission, minimum cost and maximum FM at a radiation level of 6 kWh/m²/day with latitude and tilt angle of 34° and 35°, respectively. This work will be helpful to users of solar energy, academicians, researchers and other concerned persons, in understanding the importance, severity and benefits obtained by the application and implementation of the SPV electricity-generating systems.     

Mean annual (222)Rn concentration in homes located in different geological regions of Poland: first approach to whole country area

The paper presents the results of year-long measurements of radon (²²²Rn) concentration inside 129 buildings in Poland in relation to the geological conditions of their foundation. The authors took into account the division of the country into tectonic units, as well as the lithology of the rocks forming the bedrock of these buildings. As expected, the highest value of mean annual ²²²Rn concentration (845 Bq/m³) was recorded in a building situated in the area of the Sudetes, while the highest geometric mean (characteristic of the expected log-normal data distribution) was calculated based on measurements from buildings located within the East-European craton, in the area of Mazury-Podlasie monocline, where it reached 231 Bq/m³. Such results reflect geological conditions - the occurrence of crystalline rocks (especially U- and Ra-enriched granites and orthogneisses) on the surface in the Sudetes, and of young post-glacial sediments containing fragments of Scandinavian crystalline rocks, also enriched with U and Ra, in the area of Mazury-Podlasie monocline. However, the least expected result of the investigations was finding out that, contrary to the hitherto widespread belief, none of the major tectonic units of Poland can be excluded from the list of those containing buildings with mean annual ²²²Rn concentration exceeding 200 Bq/m³. The mean annual concentration of radon for all the buildings were much higher than the mean concentration value (49.1 Bq/m³) of indoor radon in Poland quoted so far. These results cast a completely new light on the necessity to perform measurements of radon concentration in residential buildings in Poland, no more with reference to small areas with outcrops of crystalline rocks (especially the Sudetes, being the Polish fragment of the European Variscan belt), but for all the major tectonic units within Poland.     

Aggregated Estimation of Basic Parameters of Biological Production and the Carbon Budget of Russian Terrestrial Ecosystems: 2. Net Primary Production

The estimated net primary production (NPP) of Russian terrestrial ecosystems (annual average over the period from 1988 to 1992) is 9544 Tg of dry matter, or 4353 Tg of carbon. Of the total amount, forests account for approximately 39.2% (here and below, comparisons are made with respect to carbon content); natural grasslands and brushwoods, for 27.6%; farmlands (arable land and cultivated pastures), for 22.0%; and wetlands, for 11.2%. The average NPP density on lands covered with vegetation (1629.8 million hectares in Russia) is 267 g C/m²per year. The highest value (498 g C/m²per year) is characteristic of arable lands. Other land-use/land-cover (LULC) classes have the following NPP densities (in areas covered with vegetation): grasslands and brushwoods, 278 g C/m²; forests, 224 g C/m²; and wetlands, 219 g C/m²per year. In general, Russian terrestrial ecosystems accumulate 59.7% of the total NPP in the aboveground phytomass (47.8% in green parts and 11.9% in wood) and 40.3% in the underground phytomass. The latter parameter differs significantly in different LULC classes and bioclimatic zones. According to calculations, the uncertainty in estimating the total NPP is 11% (a priori confidential probability 0.9).     

Weather-dependent change of cesium,strontium, barium and tellurium contamination deposited as aerosols on various cultures

Various types of plants (wheat, bean, lettuce, radish and grass) were contaminated by dry deposition of radioactive aerosols (¹³⁷Cs, ⁸⁵Sr, ¹³³Ba and ^123mTe) in order to supplement the radioecological data necessary for operational post-accidental codes. A few days after deposition, rainfalls were applied to these cultures to evaluate the influence of some characteristics of the rain on the contamination of the culture over time. On the other hand, for wheat and bean, the influence of the humidity condition of the foliage at the contamination time was considered. For a given plant species at a given vegetative stage, the four radionuclides were intercepted in an identical way. The interception varied from 30% for bean (young sprout) to 80% for lettuce (near maturity). The global transfer factor values were dependent on both the radionuclides and the plant species; nevertheless, a higher value was obtained for cesium, regardless of the plant and the rainfall (from 0.006 m² kg_fresh⁻¹ for wheat-grains – contaminated at the shooting stage – or for bean-pods – contaminated at the pre-flowering stage – to 0.1 m² kg_fresh⁻¹ for a whole lettuce). The analysis of the results allowed us on the one hand, to extract parameter values of the foliar transfer directly usable in operational codes, in particular those relating to barium and tellurium, unknown until then, and on the other hand, to lay the foundations of a future, more mechanistic model, taking into account the foliar processes in a finer way.     

Effect of cigarette smoking on residential NO2 levels

Two studies evaluating the levels and sources of nitrogen dioxide in approximately 90 employee homes in the Richmond area with continuous sampling during the weeks of August 5, 1980, and February 9, 1981, were performed using samplers in the living room, bedroom, kitchen, and outdoors. Additional data were collected concerning appliance usage, heating/cooling plant, ventilation and cigarette smoking. Results were analyzed using BMDP routines. The largest contributor to NO₂ concentration was found to be gas-fired kitchen appliances. The mean kitchen level for homes with gas appliances during the winter study was 188 μg/m³. Excluding participants with gas kitchens, incremental influence due to cigarette smoking was detected. The 7-day, 3-room average level of NO₂ in the homes of nonsmokers and smokers without gas-fired appliances was 12 and 15 μg/m³, respectively, in the summer. The corresponding winter values were 19 and 22 μg/m³. Furthermore, the individual levels of NO₂ in the homes of smokers were generally below both the adjacent outdoor level and the National Ambient Air Quality Standard limit for annual exposure.     

Stand-alone hybrid energy system for sustainable development in rural India

Renewable energy system such as solar, wind, small hydro and biogas generators can be used successfully in rural off-grid locations where grid connection is not possible. The main objectives of this study are to examine which configuration is the most cost-effective for the village. One renewable energy model has been developed for supplying electric power for 124 rural households of an off-grid rural village in eastern India. The load demand of the village was determined by the survey work, and the loads were divided into three sub-heads such as primary load I, primary load II and deferred load. Locally available energy sources such as solar radiation and biogas derived from cow dung and kitchen wastes were used as sensitivity variables. This study is unique as it has not considered any diesel generator for supplying unmet electricity to the households; rather it completely depends on locally available renewable resources. Here in this paper, two different models were taken and their cost and environmental benefit were discussed and compared. The net present cost, levelised cost of energy and operating cost for various configurations of models were determined. The minimum cost of energy of $0.476/kWh with lowest net present cost of $386,971 and lowest operating cost ($21,025/year) was found with stand-alone solar–biogas hybrid system.     

Dynamic simulation of a decentralized polygeneration plant providing SNG,steam and power

The behaviour of a decentralized polygeneration plant providing synthetic natural gas (SNG), steam and electrical power is simulated in three scenarios in this study. The plant size is based on an assumed capacity of decentralized polygeneration plants processing 1070 m³ h^?1 (STP) of syngas. 396 m³ h^?1 (STP) of raw SNG, 0.4 t h^?1 of steam at 5 bar and 670 kW of electrical power can be generated by the plant at the reference scenario. Methanation reactor and steam generator are modelled in detail. Further results indicate that such a polygeneration plant can provide positive and negative operation reserves for the electricity network to the extent of 100% of the reference power output, while the amount of generated steam varies by less than 40%. At the same time, the generated SNG quality keeps constant. Lower variations in the amount of generated steam are applicable when reducing the operation reserve capacity.     

Experimental investigation of energy properties for Stigonematales sp. microalgae as potential biofuel feedstock

Microalgae has been considered potential biofuel source from the last decade owing to its versatile perspectives such as excellent capability of CO₂ capture and sequestration, water treatment, prolific growth rate and enormous energy content. Thus, energy research on microalgae is being harnessed to mitigate CO₂ and meet future energy demands. This study investigated the bioenergy potential of native blue-green microalgae consortium as initial energy research on microalgae in Brunei Darussalam. The local species of microalgae were assembled from rainwater drains, the species were identified as Stigonematales sp. and physical properties were characterised. Sundried biomass with moisture content ranging from 6.5% to 7.37% was measured to be used to determine the net and gross calorific value and they were 7.98 MJ/kg-8.57 MJ/kg and 8.70 MJ/kg-9.45 MJ/kg, respectively. Besides that, the hydrogen content, ash content, volatile matter, and bulk density were also experimented and they were 2.56%-3.15%, 43.6%-36.71%, 57–38%-63.29% and 661.2 kg/m³-673.07 kg/m³, respectively. Apart from experimental values, other physical bioenergy parameters were simulated and they were biomass characteristic index 61,822.29 kg/m³-62,341.3 kg/m³, energy density 5.27 GJ/m³-5.76G J/m³ and fuel value index 86.19–88.54. With these experimental results, microalgae manifested itself a potential source of biofuel feedstock for heat and electricity generation, a key tool to bring down the escalated atmospheric greenhouse gases and an alternation for fossil fuel.     

Cs,Co and K uptake by lettuce plants in two distributions of soil contamination

¹³⁷Cs and ⁶⁰Co, two of the radionuclides more representative of discharges from nuclear facilities, are of interest for radiological protections because of their great mobility in biosphere and affinity with biological systems. The aim of the present work is the investigation of the possible influence of the vertical distribution of ¹³⁷Cs and ⁶⁰Co in soil upon their uptake by lettuce as function of plant's growth. An experiment ad hoc has been carried out in field conditions. The results show that (i) the transfer of ¹³⁷Cs and ⁶⁰Co from soil to lettuce is independent by their distribution in soil, (ii) the soil–plant transfer factors of ¹³⁷Cs and ⁶⁰Co show a similar trend vs. growth stage, (iii) the ⁴⁰K transfer factor trend is different from those of anthropogenic radionuclides, and (iv) ¹³⁷Cs and ⁶⁰Co specific activities are about 1 Bq/kg, in the mature vegetable with soil activity from 9 to 21 kBq/m².     

Analyzing the hydrologic effects of region-wide land and water development interventions: a case study of the Upper Blue Nile basin

In the drylands of the Upper Blue Nile basin, high climate variability and land degradation are rampant. To enhance adaptive capacity in the region, various soil and water conservation interventions have been implemented. Moreover, water resources development schemes such as the Grand Ethiopian Renaissance Dam should be implemented by 2025. We modeled the effects of these interventions on surface runoff in the basin for both current and future (2025) basin conditions, using the runoff coefficient method in a spatially explicit approach. Under current conditions, we observed high spatial variability of mean annual runoff. The northeastern Blue Nile-1 sub-basin produces the highest mean annual runoff (391 mm or 10 × 10⁹ m³), whereas the northwestern Blue Nile-2 sub-basin produces the lowest mean annual runoff (178 mm or 0.2 × 10⁹ m³). The basin generates a total annual runoff volume of 47.7 × 10⁹ m³, of which about 54 % comes from cultivated land. The strong association between land use and topography masked the direct effect of rainfall on runoff. By 2025, total annual runoff yield could decrease by up to 38 % if appropriate basin-wide soil and water conservation interventions and the Grand Ethiopian Renaissance Dam are implemented. However, the full effects of most physical structures will only last for 1 or 2 years without regular maintenance. The improved understanding of the dynamics of the Upper Blue Nile basin’s hydrology provided by the present study will help planners to design appropriate management scenarios. Developing the basin’s database remains important for a holistic understanding of the impacts of future development interventions.     

Effect of the shape of the exposure-response function on estimated hospital costs in a study on non-elective pneumonia hospitalizations related to particulate matter

ObjectiveWe used log-linear and log-log exposure-response (E-R) functions to model the association between PM_2.5 exposure and non-elective hospitalizations for pneumonia, and estimated the attributable hospital costs by using the effect estimates obtained from both functions.MethodsWe used hospital discharge data on 3519 non-elective pneumonia admissions from UZ Brussels between 2007 and 2012 and we combined a case-crossover design with distributed lag models. The annual averted pneumonia hospitalization costs for a reduction in PM_2.5 exposure from the mean (21.4 μg/m³) to the WHO guideline for annual mean PM_2.5 (10 μg/m³) were estimated and extrapolated for Belgium.ResultsNon-elective hospitalizations for pneumonia were significantly associated with PM_2.5 exposure in both models. Using a log-linear E-R function, the estimated risk reduction for pneumonia hospitalization associated with a decrease in mean PM_2.5 exposure to 10 μg/m³ was 4.9%. The corresponding estimate for the log-log model was 10.7%. These estimates translate to an annual pneumonia hospital cost saving in Belgium of €15.5 million and almost €34 million for the log-linear and log-log E-R function, respectively.DiscussionAlthough further research is required to assess the shape of the association between PM_2.5 exposure and pneumonia hospitalizations, we demonstrated that estimates for health effects and associated costs heavily depend on the assumed E-R function. These results are important for policy making, as supra-linear E-R associations imply that significant health benefits may still be obtained from additional pollution control measures in areas where PM levels have already been reduced.     

Transfer parameter values in temperate forest ecosystems: a review

Compared to agricultural lands, forests are complex ecosystems as they can involve diverse plant species associations, several vegetative strata (overstorey, shrubs, herbaceous and other annual plant layer) and multi-layered soil profiles (forest floor, hemi-organic and mineral layers). A high degree of variability is thus generally observed in radionuclide transfers and redistribution patterns in contaminated forests. In the long term, the soil compartment represents the major reservoir of radionuclides which can give rise to long-term plant and hence food contamination. For practical reasons, the contamination of various specific forest products has commonly been quantified using the aggregated transfer factor (T_ag in m² kg⁻¹) which integrates various environmental parameters including soil and plant type, root distribution as well as nature and vertical distribution of the deposits. Long lasting availability of some radionuclides was shown to be the source of much higher transfer in forest ecosystems than in agricultural lands. This study aimed at reviewing the most relevant quantitative information on radionuclide transfers to forest biota including trees, understorey vegetation, mushrooms, berries and game animals. For both radiocaesium and radiostrontium in trees, the order of magnitude of mean T_ag values was 10⁻³ m² kg⁻¹ (dry weight). Tree foliage was usually 2–12 times more contaminated than trunk wood. Maximum contamination of tree components with radiocaesium was associated with (semi-)hydromorphic areas with thick humus layers. The transfer of radionuclides to mushrooms and berries is high, in comparison with foodstuffs grown in agricultural systems. Concerning caesium uptake by mushrooms, the transfer is characterized by a very large variability of T_ag, from 10⁻³ to 10¹ m² kg⁻¹ (dry weight). For berries, typical values are around 0.01–0.1 m² kg⁻¹ (dry weight). Transfer of radioactive caesium to game animals and reindeer and the rate of activity reduction, quantified as an ecological half-life, reflect the soil and pasture conditions at individual locations. Forests in temperate and boreal regions differ with respect to soil type and vegetation, and a faster decline of muscle activity concentrations in deer occurs in the temperate zone. However, in wild boar the caesium activity concentration shows no decline because of its special feeding habits. In the late phase, i.e. at least a few months since the external radionuclide contamination on feed plants has been removed, a T_ag value of 0.01 m² kg⁻¹ (fresh weight) is common for ¹³⁷Cs in the muscles of adult moose and terrestrial birds living in boreal forests, and 0.03 m² kg⁻¹ (fresh weight) for arctic hare. Radiocaesium concentrations in reindeer muscle in winter may exceed the summer content by a factor of more than two, the mean T_ag values for winter ranging from 0.02 to 0.8 m² kg⁻¹ (fresh weight), and in summer from 0.04 to 0.4 m² kg⁻¹. The highest values are found in the year of initial contamination, followed by a gradual reduction. In waterfowl a relatively fast decline in uptake of ¹³⁷Cs has been found, with T_ag values changing from 0.01 to 0.002 m² kg⁻¹ (fresh weight) in the three years after the contaminating event, the rate being determined by the dynamics of ¹³⁷Cs in aquatic ecosystems.     

Inventory and vertical migration of 90Sr fallout and 137Cs/90Sr ratio in Spanish mainland soils

In this paper the inventory of ⁹⁰Sr in 34 points distributed along the Spanish peninsular territory is presented. Obtained values range between 173 Bq/m² and 2047 Bq/m². From these data set and those ¹³⁷Cs data obtained in a previous work the ¹³⁷Cs/⁹⁰Sr activity ratio has been established, laying this value between 0.9 and 3.6. Also the migration depth of both radionuclides has been analysed obtaining for ¹³⁷Cs an average value 57% lower than that obtained for ⁹⁰Sr.Additionally, this paper presents the results obtained in 11 sampling points in which the activity vertical profile has been measured. These profiles have been analysed to state the behaviour of strontium in soils and after, by using a convective-diffusive model, the parameters of the model which governs the vertical migration of ⁹⁰Sr in the soil, v (apparent convection velocity) and D (apparent diffusion coefficient) have been evaluated. Mean values obtained are 0.20 cm/year and 3.67 cm²/year, respectively.     

Upper respiratory symptoms presumably due to studded tire-generated dust

The particulate concentrations in ambient air was elevated in winter seasons in the center of the city of Sendai, presumably due to the extensive use of the studded tires for automobiles; the levels of 493 and 212 μg/m³ were recorded for total particulates and respirable particulates, respectively. The subjective symptom prevalence was investigated by means of self-completion questionnaires in January–February 1984, among the ≥40-yr-old inhabitants of both sexes in the center of Sendai city (annual average total particulate concentration, 28 μg/m³) and also in two whole townships of Wakuya and Tajiri where the air was clean (annual average total particulate concentration, 14 μg/m³). About 17400, 8500, and 6200 respondents were obtained from Sendai, Wakuya, and Tajiri, with an average response rate of 87%. The survey was repeated again in September–October of the same year utilizing one-eighth of the first survey respondents with the response rate of 78%. The analyses of the January–February survey results after adjustment for age and smoking disclosed that prevalence rates of the upper respiratory symptoms such as rhinorrhea, frequent sneezing, phlegm, and sore throat were significantly higher (p < 0.01 ∼ 0.05 depending on the symptoms) among the Sendai population than the control populations in Wakuya and Tajiri in winter. Similar comparative analyses of responses in the September–October survey revealed that the differences in the prevalence rates of the above-stated symptoms did not exist in autumn when the particulate concentrations were low also in Sendai. Possible association of the observed symptoms with elevated particulate concentrations are discussed.