Towards a sustainable energy future—exploring current barriers and potential solutions in Thailand

Renewable energy is considered an indispensable basis of sustainable energy systems as electricity generation from renewable sources results in low emissions of greenhouse gases compared to fossil fuel based electricity and contributes to sustainable development. However, effective strategies and conducive institutional settings are needed for advancement of such clean electricity systems. Although Thailand, as a nation, has a huge potential for renewable energy utilization, its total amount of electricity generation from renewables is relatively small and could be enlarged substantially. Lack of policy mechanisms, institutional development and financing exist as major barriers for Thailand in this regard. Investigation of the nation’s current energy strategy implementation shows that relevant energy and development policies are at different stages of implementation and institutional settings are continuously evolving. This paper argues that further significant efforts could be made towards advancement of renewable electricity and thus achievement of energy sustainability in Thailand. Resource planning, effective policy and institutions, focussed planning for energy sustainability and implementation of the Clean Development Mechanism (CDM) under the Kyoto Protocol could facilitate further advancement of renewables for the nation.     

Solar photovoltaic investments and economic growth in EU: Are we able to evaluate the nexus?

A core question in energy economics may be stated as follows: Is the cost–benefit analysis being correctly applied when we encourage investments in renewables, as an alternative to the traditional energy sources? The relationship between energy consumption and economic growth has been extensively treated within economics literature. Yet, literature on the nexus between specific energy sources and GDP is almost inexistent. In this article, we intend to explore the relationship between a certain type of renewable generation technology (solar PV) and GDP. The present and above all the planned energy mix might differ widely from one country to another. Thus, the analysis by source of energy generation becomes a helpful instrument for policy-making. Using a fixed effects panel data methodology and a sample of eighteen EU countries, we find that a 1 % increase in solar PV installed capacity and in electricity production from renewable sources has a positive impact on GDP of 0.0248 and 0.0061 %, respectively. We also conclude that a 1 % growth on greenhouse gas emissions positively affects GDP by 0.3106 %. Further evidence reveals that, in terms of country-specific analysis, Germany, France, Italy and the UK have the most significant estimations for fixed effects. In fact, Germany is a solar PV technology producer, France has a very active nuclear sector, with little pressure for both renewables development and CO₂ reductions, Italy had in this period a strong governmental support to this sector, and the UK has a strong connection between the solar PV and the industry sectors.     

The EU sustainable energy policy indicators framework

The article deals with indicators framework to monitor implementation of the main EU (European Union) directives and other policy documents targeting sustainable energy development. The main EU directives which have impact on sustainable energy development are directives promoting energy efficiency and use of renewable energy sources, directives implementing greenhouse gas mitigation and atmospheric pollution reduction policies and other policy documents and strategies targeting energy sector. Promotion of use of renewable energy sources and energy efficiency improvements are among priorities of EU energy policy because the use of renewable energy sources and energy efficiency improvements has positive impact on energy security and climate change mitigation. The framework of indicators can be developed to establish the main targets set by EU energy and environmental policies allowing to connect indicators via chain of mutual impacts and to define policies and measures necessary to achieve established targets based on assessment of their impact on the targeted indicators representing sustainable energy development aims. The article discusses the application of indicators framework for EU sustainable energy policy analysis and presents the case study of this policy tool application for Baltic States. The article also discusses the use of biomass in Baltic States and future considerations in this field.     

The effects of different CCS technological scenarios on EU low-carbon generation mix

Carbon capture and storage technology (CCS), a technology to reduce the emissions in coal and gas power generation plants, will play an important role in the achievement of the European Union emissions reduction objective. In the European Union, energy policies are articulated around three different elements: measures to promote renewable energy technologies, the emissions certificates system and both energy-saving and energy-efficiency policies. The succession of directives and communications from the EU Commission on renewable technology generation share targets and the implementation of the European Emissions Market exemplify the serious EU commitment to a more environmentally friendly future. CCS technologies—together with RES technologies—are thus key to achieve the European emissions reduction target. Although the CCS commercial availability is not guaranteed—due to a slow technological development—some institutions, such as the Institute for Prospective Technological Studies, assume, for 2030 horizon, a quick development of this technology, growing until a maximum participation of an 18 % over the fossil fuels total generation. An eventual non-availability of these technologies in 2030 could increase the cost of this objective in a 70 %. Therefore, the achievement of pollutant emissions reduction targets depends on a correct design of the European generation technologies mix, which should include CCS technologies. Nevertheless, the uncertainty about the final costs and economic risk of these technologies makes a question about their future role to arise. This paper analyses the effects of different variations in the cost and risk of the CCS technologies (scenarios) over the European power technologies mix. The results confirm the need of the availability of these technologies in 2030, beyond the potential costs and risks of both options. The reason lies in the methodological approach of portfolio theory, which allows an analysis from an efficient portfolio point of view.     

A test of environmental Kuznets curve (EKC) for carbon emission and potential of renewable energy to reduce green house gases (GHG) in Malaysia

This study investigates the presence of environmental kuznets curve (EKC) for green house gases (GHG) measured by CO₂ emission in Malaysia for the period 1970 to 2011. The study also examines the potential of the renewable source of energy to contain GHG. The long-run significant positive coefficient of GDP indicates that the GHG are increasing with economic growth while the insignificant coefficient on GDP square rejects the EKC transition. These results indicate a high GDP level for the EKC turning point for Malaysia. Therefore, it can be stated that only economic growth cannot reverse the environmental degradation in Malaysia. The government should have to come up with some policy measures to achieve CO₂ emission reduction targets that Malaysia has pledged to achieve in Paris Submit (2015). The renewable energy production is found to have significant negative effect on CO₂ emission. So government should focus on the renewable source of energy production and should frame a special policy for renewable energy production.     

Sustainability indicators in the swine industry of the Brazilian State of Santa Catarina

In recent decades, there has been a growing concern about measuring and evaluating the results of intensive production practices, such as the mode of integration practiced on a large scale by agro-industries. The present study discusses the application and the results of a Sustainability Indicators System in the context of the swine industry in the Brazilian State of Santa Catarina. These indicators, focused on the level of sustainability maturity, can be used as a way to diagnose and compare the efficiency of the industry from a broader perspective. The research findings indicate that most of the pig farms that have been studied can be classified as “in search of sustainability or sustainable.” Nevertheless, there are differences among the dimensions and between the most ranked farms and the others which must be considered for a better design and application of public policies and company strategies toward an effective and balanced social, economic and environmental sustainability.     

Knowledge, beliefs and attitudes of secondary school students on renewable feedstocks/biomass: the case of Greece

Green Chemistry is a new approach of chemistry that aims to satisfy the global concerns and demand for sustainability. Green Chemistry is guided by twelve very specific principles of chemical practice. Among them, the seventh one promotes the use of renewable raw materials and feedstock, such as biomass. The widespread application of Green Chemistry principles in everyday life can be achieved by incorporating its paradigm into simple experiments and activities at regular school courses. Thus, an exploration of the students?? background is required. The aim of this study is to provide baseline data on Greek student??s knowledge, beliefs and attitudes related to the seventh Green Chemistry principle namely the use of renewable feedstocks, in order to facilitate introduction of appropriate provision in the school curricula and practice in Greece. Our results indicate that there is a serious knowledge gap among secondary school students regarding the main biomass formation mechanism and the connection of biomass to the global food supply in addition to the almost complete lack of knowledge of the main Green Chemistry principles. Regarding their attitudes, students are positive towards the use of biomass and express a very strong will to be environmentally informed. A logical conclusion of our research is that the development of relevant material that will focus on the application of Green Chemistry principles in everyday life in combination with a training of a core group of educators could be considered as the first steps towards the introduction of Green Chemistry principles in the secondary education system of Greece.     

Conditions for the development of anaerobic digestion technologies using the organic fraction of municipal solid waste: perspectives for Poland

This article outlines problems related to the location of facilities designed to treat the organic fraction of municipal solid waste (OFMSW). Anaerobic digestion (AD) facilities are investigated as a treatment option, while taking into account the aspects of renewable energy generation. This research has been spurred on by the relationship between waste management, energy generation issues and spatial planning procedures. The analysis is focused on urban and semi-urban areas of medium and large cities. One of the most difficult issues associated with siting of waste processing plants is its integration with local infrastructures, avoiding conflicts and negative environmental impacts at the same time. This research aims to analyse possible locations for AD plants fuelled by OFMSW in Poland. Based on the experience gained from other countries and lessons learnt from the analysis of existing facilities in Europe, conditions for the location of this type of waste treatment plants have been defined, with the focus on economic, environmental and social issues. Most likely, the results of the multicriteria decision analysis for siting of municipal solid waste AD plants (M-BIST tool) could be transferred to other countries, especially those with a comparable GDP level and a similar framework for a waste management system.     

Agro-environmental sustainability assessment using multicriteria decision analysis and system analysis

Transparency and reproducibility remain challenges for sustainability assessment, particularly in developing world contexts where formal scientific information is often limited. We posit that even in such contexts, sustainability assessment can be productive and informative if the underlying assumptions about sustainability are made transparent. Thus, the process of assessment can be as instructive as the results, if not more so. In this article, we describe and discuss how we combined multicriteria decision analysis and system analysis as a unified approach to sustainability assessment. This approach is transparent, practical, flexible, and reproducible; it also facilitates the development of recommendations for enhancing sustainability. We illustrate the approach with examples from a recent environmental sustainability assessment of irrigated commercial maize production in Sinaloa, Mexico.     

The social dimension as a driver of sustainable development: the case of family farms in southeast Spain

The social pillar has often been treated as an ‘add on’ in sustainable development studies, and analyses of its ‘proactivity’ in economic, environmental, and social transformations to sustainability outcomes are scant. The present paper looks at the social dimension as a key driver of sustainable development. Social factors in the farming system in southeast Spain are analyzed to show how family farms and their networks can integrate socio-economic and eco-social goals, promoting the generation of synergies and trade-offs between the dimensions of sustainability. This study contributes to existing debate on the role of family farms in the framework of European rural development.     

Framing Renewable Energy: A Comparative Study of Newspapers in Australia and Sweden

Australia and Sweden display very different institutional settings and contexts for the production of environmental journalism. This empirical study examined how two major quality newspapers in Sweden and Australia have framed renewable energy as an environmental, political, scientific, economic and civil society issue. A deductive, quantitative methodological approach was used to identify dominant frames and actors in articles in The Australian (Australia) and Dagens Nyheter (Sweden) between October 2010 and June 2011 2010/2011. The findings suggest that the attention given to different types of renewable energy in the two newspapers and how issues were framed was contingent on the domestication of the discussion of renewable energy in the two countries. Reporting on renewable energy in both newspapers was characterized by a focus on “elite” actors and economic frames, the absence of civil society frames and negative (The Australian) or ambiguous (Dagens Nyheter) environmental frames. The study extends our understanding of the contextual conditions that enable and limit journalists when reporting environmental issues.     

中国农村居民可再生能源生活消费的碳排放评估

农村居民能源消费涉及能源安全、环境效应、新农村建设等多个方面,从发展趋势来看,在未来相当长的时期内,秸秆、薪柴等传统生物质能仍是我国农村居民的主要生活能源.本文在分析了我国农村居民可再生能源生活消费现状的基础上,测算了1998 -2007年农村居民可再生能源生活消费的碳排放,评估了农村居民可再生能源生活消费的环境效应.得出结论:在我国农村居民能源生活消费的过程中,碳排放的主体是秸秆和薪柴等生物质能的传统利用,其次是商品性能源的使用.在未来的发展过程中,农村居民能源消费必须依靠农村丰富的可再生资源,优化物质循环过程,变生物质能的传统利用为清洁利用,减少温室气体排放,实现改善农村环境,减缓和适应气候变化的总体发展目标.     

可再生能源发展情景设计及评价研究

通过对当前主要的情景设计及评价方法的研究,认为目前我国可再生能源发展迅速,但初期的部分基本工作尚未完成.尤其是可再生能源的供给潜力及其经济可开发性评价.基于此,提出一种基于动态成本曲线的可再生能源发展战略情景仿真模型.动态成本曲线生成的基本原理是在静态成本曲线基础上,考虑技术进步、可再生能源外部价值对静态成本曲线的影响,从而生成不同时期的可再生能源成本曲线,进而构成可再生能源动态成本曲线.考虑不同种类可再生能源技术进步水平、外部环境价值的变化,设计不同的可再生能源发展情景.基于可再生能源动态成本曲线,并对不同的可再生能源发展情景下的投资成本、能源效益、经济效益和社会效益进行了综合评价.最后通过一个案例,分四种情景,即不考虑技术进步,低环境方案情景;不考虑技术进步,高环境方案情景;考虑技术进步,低环境方案情景;考虑技术进步,高环境方案情景;分别给出了四种情景下的装机总量、投资总额、创造就业、污染物和温室气体减排量.     

More dams,more violence? A global analysis on resistances and repression around conflictive dams through co-produced knowledge

The present article analyses a unique database of 220 dam-related environmental conflicts, retrieved from the Global Atlas on Environmental Justice (EJAtlas), and based on knowledge co-production between academics and activists. Despite well-known controversial, social, and environmental impacts of dams, efforts to increase renewable energy generation have reinstated the interest into hydropower development globally. People affected by dams have largely denounced such ‘unsustainabilities’ through collective non-violent actions. Nevertheless, we found that repression, criminalization, violent targeting of activists and assassinations are recurrent features of conflictive dams. Violent repression is particularly high when indigenous people are involved. Indirect forms of violence are also analysed through socio-economic, environmental, and health impacts. We argue that increasing repression of the opposition against unwanted energy infrastructures does not only serve to curb specific protest actions, but also aims to delegitimize and undermine differing understanding of sustainability, epistemologies, and world views. This analysis cautions that allegedly sustainable renewables such as hydropower often replicates patterns of violence within a frame of an ‘extractivism of renewables’. We finally suggest that co-production of knowledge between scientists, activists, and communities should be largely encouraged to investigate sensitive and contentious topics in sustainability studies.     

The clean development mechanism—catalyst for wide spread deployment of renewable energy technologies? or misnomer?

The (usually not professed) truth is that we are not destroying the planet due to lack of technology, but due to lack of application of technology. Indeed, opportunities exist for renewable energy technologies’ diffusion under the new climate change regime as they contribute to global sustainability through GHG mitigation and, they conform to national priorities by leading to the enhancement of local economic activity, capacities and infrastructure. The clean development mechanism (CDM), although is considered one of the global policy tools to contribute to sustainable development and technology transfer, has recently been criticised for its unequal distribution of projects across countries and for insufficiently being embedded in developing countries’ national energy context. In the above framework, this article presents the ENTTRANS approach, five indicative renewable energy technologies, and insights about a more effective application of CDM, which may be part of the international process striving towards sustainable development.     

CAD and DFM: enablers of sustainable product design

Sustainability has been regarded as an important concept for survival in the contemporary scenario. Modern design engineers are in need of approaches for creating sustainable products. In this context, this paper reports a case study carried out in an Indian modular switches manufacturing organisation. The existing handle of the switch has been modelled using computer-aided design (CAD). Then, the sustainability analysis has been carried out for determining the environmental impact. This is followed by the redesign of the handle using design for manufacturability (DFM) principles. The sustainability has been measured in terms of carbon footprint, energy consumption and air–water impacts. It has been found that the redesigned handle possesses minimal environmental impact. It could be inferred from the results of the case study that CAD and DFM could lead to the development of sustainable product design with minimal impact on the environment.     

Research on the development and planning of renewable energy in Tibet

With the rapid social and economic development of the Tibet Autonomous Region,the situation in regard to energy supply and demand is increasingly tense.Meanwhile,the development of renewable energy in Tibet has been given considerable practical significance by its peculiar ecological environment.Given the complementarity of renewable energies in Tibet,using the method of factor analysis,we derived four major factors:level of economic development,social development,industrial development,and energy endowment,which help to evaluate development conditions in different regions of Tibet.Treating these four factors equally,we used the hierarchical clustering method to determine the order of regional development.Thus we acquire a three-stage planning project for renewable energy.In the first stage,Lhasa plays a leading role in promoting the development of renewable energy,particularly that based on solar and wind energy.There are two phases in the second stage,the first being to simultaneously develop solar and wind energy in Xigaze and Nyingchi.The second is to develop solar and wind energy in accordance with the time of year in Qamdo,Nagqu,and Ali,with 1.145billion kWh electricity to be generated.The third stage is to develop energy production in Lhoka Prefecture,with 1.369billion kWh electricity to be generated.At the end of the three-stage project,consumption of available electricity will have reached 4.045 billion kwh,with major social and economic benefits.     

Discrete-choice experiments valuing local environmental impacts of renewables: two approaches to a case study in Portugal

Despite the often mentioned environmental benefits associated with transition from fossil fuels to renewable energy sources, their use for electricity production has non-negligible negative environmental impacts. The most commonly mentioned in surveys concern different types of landscape impacts, impacts on the fauna and flora, and noise. These impacts differ by size and location of plants, and by source of energy, rendering the policy decision complex. In addition, there are other welfare issues to take into consideration, as positive and negative environmental impacts are not evenly distributed among population groups. This paper proposes to compare the welfare impacts of renewable energy sources controlling for the type of renewable as well as the specific environmental impact by source. To this end, two discrete-choice experiments are designed and applied to a national sample of the Portuguese population. In one case, only individual negative impacts of renewables are used, and in another case, the negative impacts interact with a specific source. Results show the robustness of discrete-choice experiments as a method to estimate the welfare change induced by the impacts of renewable energy sources. Overall, respondents are willing to pay to reduce the environmental impacts, thus making compensation for local impacts feasible. Moreover, the estimations reveal that respondents are significantly sensitive to the detrimental environmental effects of specific renewable energy sources, being willing to pay more to use these sources of energy relative to others.     

Electric vehicles: solution or new problem?

Since electric vehicles (EVs) have been recognized as a technology that reduces local air pollution while improving transport energy security, they have been promoted in many countries. Yet, mainly due to their high costs, especially in the case of pure battery electric vehicles, and a lack of proper infrastructure, the use of EVs is still very limited. In this paper, some of the major barriers and the future challenges are discussed. The current problems are mainly attributed to two categories: (1) the battery performances and costs, as well as battery production including issue of material availability and (2) environmental benefits of EVs depending on the sources used for the electricity generation and their carbon intensity. The major conclusions are that (1) research and development with respect to batteries has by far the highest priority and (2) it has to be ensured that the electricity used in EVs is generated largely from renewable energy sources.     

Sustainable supplier selection criteria classification for Indian iron and steel industry: a fuzzy modified Kano model approach

ABSTRACT

The aim of this work is to provide a systematic approach for sustainability criteria clustering into different useful categories. For this purpose, a methodology has been proposed with the following three steps. (i) A comprehensive set of the sustainability criteria in economic, environmental and social dimension has been extracted from the literature and have been customised for the iron and steel industry. (ii) A fuzzy Kano methodology has been used to classify these sustainability criteria into useful Kano cluster like must-be, one-dimensional, and attractive cluster (iii) further, must-be and attractive criteria derived from the second step were further sub-classified into three categories using Type IV Kano model. All steps have been examined in the iron and steel industry of India and findings indicate that quality and delivery criteria are classified as high must be criteria in the economic realm. Further, environmental and energy management system in the environmental dimension and social responsibility and right of stakeholders criteria in the social dimension are classified as high must be criteria. Prioritising must be and attractive criteria enable decision makers of other industries to select the appropriate criteria to adopt sustainability.