国内FGD装置鳞片衬里防腐蚀失效原因初探

湿法烟气脱硫装置因其处理烟气量大、脱硫率高、运行周期长、运营成本适中,已成为国内外火电厂烟气脱硫的主导装置.但该装置腐蚀环境恶劣,防腐蚀是FGD装置中的一个重要环节,而作为一种普遍采用的鳞片衬里材料,在国内的一些应用案例中出现了一些防腐蚀失效以至失败的情况.就一些FGD装置防腐失效的情况进行分析和总结,找出其中的原因并提出对策,从而为后续烟气脱硫装置的防腐提供可靠的技术借鉴.     

火电厂FGD装置性能试验有关问题的探讨

针对目前我国还没有专门针对烟气脱硫(FGD)装置性能试验规程的情况,对于火电厂FGD性能试验的内容和标准、现场测量的特点、测点布置和测量方法的选择、试验工况和试验时间的要求等问题,进行了介绍和探讨,以期为脱硫装置性能试验的实践提供一些建议和参考.     

脱硫装置的经济性和脱硫石膏改良盐碱地的探讨

就中国安装脱硫装置的经济问题以及脱硫装置运转后得到的副产品石膏对盐碱地改良、促进中国粮食增产的问题进行探讨。结果表明,安装脱硫装置,既可以减少大气污染,还可以改良盐碱地,防止土地沙漠化,改良后的盐碱地可以进行粮食生产。     

无GGH湿法烟气脱硫系统烟囱石膏雨的影响因素及策略研究

燃煤电厂脱硫设施90％以上机组均采用石灰石-石膏湿法脱硫工艺.由于堵塞和腐蚀等问题,近年大部分新建脱硫装置均取消GGH装置,但在运行过程中出现了“石膏雨”问题.通过分析湿法烟气脱硫“石膏雨”产生的影响因素,提出了环境约束条件下效益—成本最大化的“石膏雨”控制策略.     

广东省火电厂烟气脱硫装置运行情况分析

对广东省11个火电厂脱硫装置的运行情况进行了调研和分析,总结了脱硫装置运行中普遍存在的问题,并提出了相应的建议,对于脱硫装置的运行优化具有参考意义。     

现役火电机组拆除脱硫旁路挡板应对措施研究

根据“十二五”环境保护规划要求,现役火电机组大部分脱硫装置必须拆除旁路挡板。介绍了现役火电机组脱硫装置旁路烟道设置所发挥的作用,分析了现役火电机组脱硫装置拆除旁路挡板后对机组所产生的影响及存在问题,并提出了相应的改造、完善和运维管理措施,为现役火电机组拆除脱硫旁路挡板后的工作提供借鉴和帮助。     

上海火电厂控制SO2排放的举措

介绍了上海欠电厂控制SO2排放的有效措施,预测了电力发展与SO2排放的趋势,阐述了加强电力环保、节能减排的重要性和必要性,分析了"十一五"期间上海"大代小"、火电建设、脱硫装置建设的规模和脱硫政策,提出了烟气脱硫存在的问题和建议.     

上海火电厂烟气脱硫现状分析与建议

介绍了上海火电厂烟气脱硫的现状,对脱硫工艺选择、脱硫效率进行了分析。阐明了我国烟气脱硫普遍选用的石灰石一石膏湿法脱硫的特点和局限性,探讨了建立SO2排污权交易制度的必要性和可行性,分析了烟气脱硫装置存在的问题及预防措施。     

湿法脱硫吸收塔在线监测系统常见问题及解决办法

在线监测装置是运行人员的＂眼睛＂,能否正常运行,对整套脱硫系统的可靠、经济、甚至安全运行均有十分重要的影响。脱硫系统所属的关键在线监测装置包括压降测量装置、吸收塔浆液密度和液位测量装置、吸收塔浆液pH值测量装置,堵塞是三者所存在的共性问题,后两者还存在其他方面的常见问题,分析了某厂湿法脱硫吸收塔在线监测系统产生上述常见问题的原因,提出了相应的解决办法。     

石灰石—石膏湿法脱硫装置磨损腐蚀问题分析

分析了目前国内现有石灰石—石膏湿法脱硫装置的磨损防腐问题,简述了在运石灰石—石膏湿法脱硫装置的主要磨损腐蚀环境及相应的防护措施。     

电厂建设运行中的水土流失预测与水土保持设计

在燃煤电厂建设运行的同时,将引起一系列的水土流失问题.以四川国电金堂电厂二期扩建工程为例,简要说明项目区水土流失预测的内容和方法,并在其基础上对可能产生的水土流失和危害进行了分析,同时介绍了建设期和运行期采取的综合防治措施,为类似工程的水土保持提供借鉴.     

磷对环境的污染及防治对策

我国水体富营养化严重，其主要控制因子是磷。在分析磷污染的污染状况，污染源的基础上，介绍了防治对策，采用低磷循环冷却水处理剂，减少磷排放，是防止工业磷污染的有效方法。     

Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene

A comparison of waste and virgin polypropylene (PP) plastics under slow pyrolysis conditions is presented. Moreover, mixtures of waste PP with wastes of polyethylene (PE) and polystyrene (PS) were pyrolyzed under the same operating conditions. Not only the impact of waste on degradation products but also impacts of the variations in the mixing ratio were investigated. The thermogravimetric weight loss curves and their derivatives of virgin and waste PP showed differences due to the impurities which are dirt and food residues. The liquid yield distribution concerning the aliphatic, mono-aromatic and poly-aromatic compounds varies as the ratio of PP waste increases in the waste plastic mixtures. In addition to this, the alkene/alkane ratio of gas products shows variations depending on the mixing ratio of wastes.     

北京市居民衣服消费处置及对其回收利用认识调查与分析

首先对北京市居民每年购买新衣服的数量、支出、穿着时间、淘汰原因,以及闲置衣服的处理方式、数量等进行了调查与分析,然后对北京市居民对旧衣物回收利用的认识、回收形式及其处理方式,对旧衣物如何处理回收、再利用的担忧,对希望旧衣物回收箱摆放的场所等进行了调查与分析。其研究结果对废旧纺织品回收体系建设、制度及政策制定具有一定的参考价值。     

Photo-oxidation and Photo-toxicity of Crude and Refined Oils

The fate and effects of an oil spill are effected by solar radiation through the action of photo-oxidation and photo-toxicity. Photo-oxidation, an important process in the weathering of oil, produces a variety of oxidized compounds, including aliphatic and aromatic ketones, aldehydes, carboxylic acids, fatty acids, esters, epoxides, sulfoxides, sulfones, phenols, anhydrides, quinones and aliphatic and aromatic alcohols. Some of these compounds contribute to the marine biota toxicity observed after an oil spill. Photo-toxicity occurs when uptake of certain petroleum compounds, e.g. certain polycyclic aromatic hydrocarbons and benzothiophenes, is followed by solar exposure which results in much greater toxicity than after dark uptake. The mechanism of PAH photo-toxicity includes absorbance of solar radiation by the PAH which produces a free radical and this free radical in turn reacts with oxygen to produce reactive oxygen species that can damage DNA and other cellular macromolecules. While most studies on photo-toxicity have been carried out in the laboratory, there are studies showing that water from an oil spill is photo-toxic to bivalve embryos for at least a few days after the spill. Other studies have found that oil contaminated sediments are photo-toxic to several marine invertebrates. More studies are required to determine if marine fauna at an oil spill site are effected by the action of photo-toxicity and photo-oxidation.     

Synthesis and Characterization of Polyols and Polyurethane Foams from PET Waste and Crude Glycerol

In this study, polyethylene terephthalate (PET) waste from post-consumer soft-drink bottles and crude glycerol from the biodiesel industry were used for the preparation of polyols and polyurethane foams. PET waste was firstly depolymerized by the glycolysis of diethylene glycol. The glycolyzed PET oligomers were then reacted with crude glycerol at different weight ratios to produce polyols via a series of reactions, such as esterification, transesterification, condensation, and polycondensation. The polyols were characterized by titration, viscometry, gel permeation chromatography (GPC), and differential scanning calorimetry. Subsequently, polyurethane (PU) foams were made via the reaction between the produced polyols and polymeric methylene-4,4′-diphenyl diisocyanate and were characterized by mechanical testing, scanning electron microscopy, and thermogravimetric analysis. Polyols from crude glycerol and their PU foams were also prepared to compare properties with those of polyols and PU foams from PET and crude glycerol. The influence of aromatic segments existing in glycolyzed PET and glycerol content on the properties of the polyols and PU foams was investigated. It was found that aromatic segments of polyols from glycolyzed PET helped increase their molecular weights and improve thermal stability of PU foams, while high glycerol content in polyols increased the hydroxyl number of polyols and the density and compressive strength of PU foams.     

Novel and innovative pyrolysis and gasification technologies for energy efficient and environmentally sound MSW disposal

Within the context of European Union (EU) energy policy and sustainibility in waste management, recent EU regulations demand energy efficient and environmentally sound disposal methods of Municipal Solid Waste (MSW). Currently, landfill with its many drawbacks is the preferred option in the EU and many other industrialised countries. Within the waste management hierarchy thermal disposal especially incineration is a viable and proven alternative. But, the dominating method, mass-burn grate incineration has drawbacks as well particularly hazardous emissions and harmful process residues. In recent years, pyrolysis and gasification technologies have emerged to address these issues and improve the energy output. To keep the many players in the field comprehensively informed and up-to-date, novel and innovative technology approaches emphasising European developments are reviewed.     

微生物絮凝剂及其在水处理中的应用

近年来对微生物絮凝剂的研究不断深入，新的高效菌种不断被发现。简要介绍了微生物絮凝剂的絮凝机理、分关、絮凝效果及影响因素，重点介绍了新型微生物絮凝剂在水处理中的应用。     

Laboratory Experiments and Estimation of Cumulative Infiltration and Sorptivity

Soil water cumulative infiltration affects the environment by controlling the irrigation rate and consequently the water and pollutants movement through the ground. In order to study the cumulative infiltration in a sandy soil sample, experiments were performed in the laboratory. The sample was placed uniformly in a transparent column with an inner diameter of 6 cm. A constant head boundary condition of a 2 mm height was applied on the surface of the sample and the cumulative volume of the incoming water was measured. Soil moisture at four locations of the column was measured, by using the TDR method in order to obtain the moisture profiles. By comparing the values of the infiltrated water volumes with those calculated by the integration of the moisture profiles, a good agreement was found out. Also the Parlange theoretical model fitted very well with the infiltration experimental points.