Impacts of simulated acid rain on cation leaching from the Latosol in south China

Acid rain is a problem of increasing agricultural, environmental, and ecological concerns worldwide. This study investigated impacts of simulated acid rain (SAR) on cation leaching from the Latosol in south China. Latosol is an acidic red soil and occurs in the tropical rainforest biome. Laboratory experiments were performed by leaching the soil columns with the SAR at a pH range from 2.5 to 7.0 over a 21-day period. A linear increase in effluent K⁺ concentration was found at the SAR pH 3.0, whereas an exponential decrease in effluent Na⁺ concentration was observed at all levels of the SAR pH. In general, leaching of Ca²⁺ and Mg²⁺ from the Latosol increased as the SAR pH decreased. There was a very good nonlinear correlation between the removal of soil K⁺ and the SAR pH (R² = 0.91), a good nonlinear correlation between the removal of soil Mg⁺² and the SAR pH (R² = 0.83), a fairly good nonlinear correlation between the removal of soil Ca⁺² and the SAR pH (R² = 0.56), and no correlation between the removal of soil Na⁺ and the SAR pH (R² = 0.06). Our study further revealed that the removal of soil cations such as K⁺, Ca⁺², and Mg⁺² can be quantified by the quadratic polynomial equations. In addition, impacts of the SAR on cation leaching depended not only on the SAR pH but also on the original soil pH.     

Bioavailability of zinc in runoff water from roofing materials

Corrosion and runoff from zinc-coated materials and outdoor structures is an important source for the dispersion of zinc in the environment. Being part of a large inter-disciplinary research project, this study presents the bioavailability of zinc in runoff water immediately after release from the surface of 15 different commercially available zinc-based materials exposed to the urban environment of Stockholm, Sweden. Runoff water was analysed chemically and evaluated for its possible environmental impact, using both a biosensor test with the bacteria Alcaligenes eutrophus (Biomet^®) and the conventional 72 h growth inhibition test with the green alga Raphidocelis subcapitata. Chemical speciation modelling revealed that most zinc (94.3–99.9%) was present as the free Zn ion, the most bioavailable speciation form. These findings were confirmed by the results of the biosensor test (Biomet^®) which indicated that all zinc was indeed bioavailable. Analysis of the ecotoxicity data also suggested that the observed toxic effects were due to the presence of Zn²⁺ ions. Finally, regression analysis showed that, for this type of runoff samples, the rapid screening biosensor was capable of predicting (a) the total amount of zinc present in the runoff samples (R² of 0.93–0.98; p<0.05) and (b) the observed 72 h-EbC₅₀s (R² of 0.69–0.97; p<0.05).     

Kinetic studies of adsorption of thiocyanate onto ZnCl2 activated carbon from coir pith, an agricultural solid waste

The adsorption of thiocyanate onto ZnCl₂ activated carbon developed from coir pith was investigated to assess the possible use of this adsorbent. The influence of various parameters such as agitation time, thiocyanate concentration, adsorbent dose, pH and temperature has been studied. Adsorption followed second-order rate kinetics. Two theoretical adsorption isotherms, namely, Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Q₀) was found to be 16.2 mg g⁻¹ of the adsorbent. The per cent adsorption was maximum in the pH range 3.0–7.0. pH effect and desorption studies showed that ion exchange and chemisorption mechanism are involved in the adsorption process. Thermodynamic parameters such as ΔG⁰, ΔH⁰ and ΔS⁰ for the adsorption were evaluated. The negative values of ΔH⁰ confirm the exothermic nature of adsorption. Effects of foreign ions on the adsorption of thiocyanate have been investigated. Removal of thiocyanate from ground water was also tested.     

Preparation of agricultural residue anion exchangers and its nitrate maximum adsorption capacity

Anion exchangers were prepared from different agricultural residues (AR) after reaction with epichlorohydrin and dimethylamine in the presence of pyridine and N,N-dimethylformamide (EDM method). Agricultural residues anion exchangers (AR-AE) produced by the EDM method were inexpensive and showed almost the same NO₃⁻ removal capacities as Amberlite IRA-900. AR-AE produced from AR with higher hemicelluloses, lignin, ash and extractive contents resulted in the lower yields. Sugarcane bagasse with the highest -cellulose contents of 51.2% had the highest yield (225%) and lowest preparation cost. The highest maximum adsorption capacity (Q_max) for nitrate was obtained from rice hull (1.21 mmol g⁻¹) and pine bark natural exchangers (1.06 mmol g⁻¹). No correlation was found between Q_max and -cellulose content in the original AR. AR-AE produced from different AR demonstrated comparable Q_max due to the removal of non-active compounds such as extractives, lignin and hemicelluloses from AR during the preparation process. Similar preparation from pure cellulose and pure alkaline lignin demonstrated that the EDM method could not produce anion exchangers from pure lignin due to its solubilization after the reaction with epichlorohydrin.     

Impacts of some meteorological parameters on SO2 and TSP concentrations in Erzurum, Turkey

The air pollution is the one of the most important environmental problems in Erzurum, situated in the eastern of Turkey, during winter periods. The unfavorable climate as well as the city’s topography, and inappropriate urbanization cause serious air pollution problems. The air pollutant concentrations in a city have a close relationship with its meteorological parameters. In the present study, the relationship between daily average total suspended particulate (TSP) and sulphur dioxide (SO₂) concentrations with meteorological factors, such as wind speed, temperature, relative humidity, pressure and precipitation, in 1995–2002 winter seasons was statistically analyzed using the stepwise multiple linear regression analysis. According to the results obtained through analysis, higher TSP and SO₂ concentrations are strongly related to colder temperatures, lower wind speed, higher pressure system and weakly lower precipitation and higher relative humidity. The statistical models of SO₂ and TSP including meteorological parameters gave R² of 0.74 and 0.88, respectively. Furthermore, the correlation between the previous day’s SO₂, TSP concentrations and actual concentrations of these pollutants on that day was investigated and found as 0.84 and 0.53, respectively. In order to develop this model, previous day’s SO₂ and TSP concentrations were added to the equations. The new model for SO₂ enhanced considerably (R² = 0.92), but for TSP new model was not enhanced (R² = 0.89).     

Sorption of mercury (II) in Amazon soils from column studies

The sorption of Hg (II) onto four different types of Amazon soils from the A-horizon was investigated by means of column experiments under saturation conditions and controlled metal load. Higher organic matter contents in the soil resulted in higher Hg (II) adsorptions, reaching values as high as 3.8 mg Hg g⁻¹ soil. The amount of mercury adsorbed on a soil column (Q) shows a very poor correlation with soil clay content (r² = 0.2527), indicating that Hg sorption in these topsoil samples is chiefly governed by the organic matter content. Desorption experiments using Negro River (Amazon) waters were conducted using soil saturated with Hg (II) in order to better understand the metal leaching mechanism. The amount of Hg (II) released from soils was around 30% of the total sorbed mercury upon saturation, suggesting that mercury sorption in the soils present in the catchment area of the Negro River basin is not a reversible process.     

Linear free energy relationships for dechlorination of aromatic chlorides by Pd/Fe

Reductive dechlorination rate constants for five chlorobenzenes in the presence of Pd/Fe as catalyst were determined experimentally. Linear free energy relationships (LFER) for the dechlorination rate constants of five chlorobenzenes and three chlorophenols were developed by partial least squares (PLS) regression based on quantum chemical parameters computed by PM3 Hamiltonian. The optimal LFER model obtained is

logk=−1.63+1.46×10⁻³ΔH_f−7.69×10⁻¹E_LUMO

where k stands for the dechlorination rate constants, ΔH_f is the standard heat of formation, and E_LUMO is the energy of the lowest unoccupied molecular orbital. The Q²_cum value of the model is 0.879, indicating good robustness and predictive power of the model.     

The toxicity of copper,cadmium and zinc to four different Hydra (Cnidaria: Hydrozoa)

An acute toxicity study of three metals to Hydra species carried out using two different assessment methods, (i) determination of the LC50 and (ii) measurement of progressive morphological changes, demonstrated that relative toxicity decreased from copper to cadmium with zinc the least toxic for all species. The latter method revealed more details of the effect on Hydra in terms of physical damage to the polyp but both methods indicated that H. viridissima was more sensitive to copper and cadmium than H. vulgaris¹ (Zurich strain, male clone), H. vulgaris² (a dioecious strain reproducing sexually and asexually) and H. oligactis (dioecious, reproducing sexually and asexually). The responses to zinc were similar for all Hydra. The possible role of metabolic interactions between H. viridissima and its symbiotic green algae in contributing to the greater sensitivity of this polyp is discussed.     

Characterizing As(III,V) adsorption by soils surrounding ash disposal facilities

Leachate derived from unlined coal ash disposal facilities is a potential anthropogenic source of arsenic to the environment. To establish a theoretical framework for predicting attenuation of arsenic by soils subject to ash landfill leachate, which is typically enriched in calcium and sulfate, the adsorption of As(V) and As(III) was characterized from 1 mM CaSO₄ for 18 soils obtained down-gradient from three ash landfill sites and representing a wide range in soil properties. As(V) consistently exhibited an order of magnitude greater adsorption than As(III). As(V) adsorption was best described by coupling pH with 15 s DCB-Fe (R² = 0.851,  = 0.001), although pH coupled to clay, DCB-Fe, or DCB-Al also generated strong correlations. For As(III), pH coupled to Ox–Fe (R² = 0.725,  = 0.001) or Ox–Fe/Al (R² = 0.771,  = 0.001) provided the best predictive relationships. Ca²⁺ induced increases in As(V) adsorption whereas sulfate suppressed both As(V) and As(III) adsorption. Attenuation of arsenic from ash leachate agreed well with adsorption measured from 1 mM CaSO₄ suggesting that the use of 1 mM CaSO₄ in laboratory adsorption tests is a reasonable approach for estimating arsenic behavior in soils surrounding ash landfills. We also showed that the impact of leachate-induced changes in soil pH over time may not be significant for As(V) adsorption at pH < 7; however, As(III) adsorption may be impacted over a wider pH range especially if phyllosilicate clays contribute significantly to adsorption. The benefits and limitations of predicting arsenic mobility using linearized adsorption coefficients estimated from nonlinear adsorption isotherms or from the relationships generated in this study are also discussed.     

Holographic QSAR of selected esters

The HQSAR (Holographic QSAR) method, which has been recently developed, can offer the ability to rapidly and easily generate QSAR models of high statistical quality and predictive value. HQSAR analysis requires selecting values for parameters that specify the size of the hologram that is to be used, and the size and type of fragment substructures that are to be encoded. The color coding is provided by HQSAR to reflect which molecular fragments may be important contributors to the biological activity. In this work, we studied the quantitative structure activity relationship of selected esters using the HQSAR method. A robust HQSAR model with r² (non-cross-validated regression coefficient) of 0.981 and q² (cross-validated regression coefficient) of 0.912, was developed after optimizing the fragment size and the hologram length. The color coding analysis, which has rarely been reported before, was done here to explain the outlier successfully.     

Risk assessment of etofenprox (Vectron) on non-target aquatic fauna compared with other pesticides used as Simulium larvicide in a tropical environment

Within the rotational scheme developed by the Programme to fight the resistance of Simulium damnosum to chemical larvicides, there was an operational gap at discharges between 5 and 70 m³ s⁻¹ for the treatment of rivers where resistance to organophosphates was present. The use of permethrin and carbosulfan was precluded because of risk of environmental impact and, Bacillus thuringiensis ser. H-14 treatments were not envisageable due to cost and logistics constraints. Among the possible complementary groups of larvicides tested, the pseudo-pyrethroids, held promise, because of a mode of action similar to that of pyrethroids, but along with a usually lower toxicity for fish. Etofenprox, one of the pseudo-pyrethroids tested, shows a global detachment of non-target insects in 24 h close to that of pyraclofos, an organo-phosphorus compound (27 against 23%). In laboratory conditions, six times the operational dose which is 0.03 mg l⁻¹ 10 min, is needed to cause 50% mortality of Caridina sp. (a small shrimps species) and 30 times this same dose for 95% mortality. For fish species, a safety margin of 400–800 times the operational dose is observed for Oreochromis niloticus and 200–400 times for Tilapia zillii.     

Biotransformation of ethinylestradiol by microalgae

The capability of biotransformation of 11 microalgae strains was tested on ethinylestradiol (EE). Seven strains were ineffective whilst Selenastrum capricornutum, Scenedesmus quadricauda, Scenedesmus vacuolatus and Ankistrodesmus braunii biotransformed the substrate. EE was converted by S. capricornutum in three products (ethinylestradiol glucoside, 3-β-d-glucopyranosyl-2-hydroxyethinylestradiol, and 3-β-d-glucopyranosyl-6β-hydroxyethinyl estradiol) in 40%, 5%, and 5% yields, respectively. S. quadricauda transformed EE into 17-ethinyl-1,4-estradien-10,17β-diol-3-one (12%) and A. braunii transformed EE into 6--hydroxy-ethinylestradiol (25%).

It is noteworthy that EE is converted in 92% yield in ethinylestradiol glucoside by S. capricornutum when using optimal algal density conditions.     

Photocatalytic bacterial inactivation by polyoxometalates

The photocatalytic inactivation (PCI) of Escherichia coli (Gram-negative) and Bacillus subtilis (Gram-positive) was performed using polyoxometalate (POM) as a homogeneous photocatalyst and compared with that of heterogeneous TiO₂ photocatalyst. Aqueous suspensions of the microorganisms (10⁷–10⁸ cfu ml⁻¹) and POM (or TiO₂) were irradiated with black light lamps. The POM-PCI was faster than (or comparable to) TiO₂-PCI under the experimental conditions employed in this study. The relative efficiency of POM-PCI was species-dependent. Among three POMs (H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₄SiW₁₂O₄₀) tested in this study, the inactivation of E. coli was fastest with H₄SiW₁₂O₄₀ while that of B. subtilis was the most efficient with H₃PW₁₂O₄₀. Although the biocidal action of TiO₂ photocatalyst has been commonly ascribed to the role of photogenerated reactive oxygen species such as hydroxyl radicals and superoxides, the cell death mechanism with POM seems to be different from TiO₂-PCI. While TiO₂ caused the cell membrane disruption, POM did not induce the cell lysis. When methanol was added to the POM solution, not only the PCI of E. coli was enhanced (contrary to the case of TiO₂-PCI) but also the dark inactivation was observed. This was ascribed to the in situ production of formaldehyde from the oxidation of methanol. The interesting biocidal property of POM photocatalyst might be utilized as a potential disinfectant technology.     

Biotransformation and antioxidant response in Ceratophyllum demersum experimentally exposed to 1,2- and 1,4-dichlorobenzene

We report the effects of 1,2- and 1,4-dichlorobenzene (1,2-DCB and 1,4-DCB) on the aquatic macrophyte Ceratophyllum demersum. We evaluated the response of the antioxidant system through the assay of glutathione reductase (GR), guaiacol peroxidase (POD) and glutathione peroxidase (GPx). Additionally, the effect of DCBs on the detoxication system by measuring the activity of glutathione-S-transferase (GST) was evaluated.

C. demersum showed elevated GST activities when exposed to 10 and 20 mg l⁻¹ 1,2-DCB, and at 10 mg l⁻¹ for 1,4-DCB. These results show that glutathione conjugation take place at relatively high concentrations of both isomers. Significantly increased activities of POD were also detected in C. demersum exposed to concentrations above 5 mg l⁻¹ of the corresponding isomer.

The GR activity was enhanced in plants exposed to 1,2-DCB (5 mg l⁻¹) and 1,4-DCB (10 mg l⁻¹). GPx was also significantly increased in exposures to the corresponding isomer, each at a concentration of 10 mg l⁻¹. However, plants exposed to low doses of 1,4-DCB (1 mg l⁻¹) showed significantly decreased activities of both enzymes GR and GPx.

Consequently, it is clear that the exposure of the aquatic macrophyte C. demersum to DCBs is able to cause an activation of the antioxidant system, showing an isomer specific pattern, which suggests that the defence system of this plant is playing an important role in scavenging ROS, helping to protect the organism against adverse oxidative effects generated by the prooxidant action of the tested xenobiotics. Furthermore, increased GST activities give indirect evidence on the conjugation of either DCBs or the corresponding metabolites during phase II of detoxication, which supports the elimination process of toxic metabolites from cells of C. demersum.     

Assessment of toxicity of a glyphosate-based formulation using bacterial systems in lake water

A new Aeromonas bioassay is described to assess the potential harmful effects of the glyphosate-based herbicide, Roundup^®, in the Albufera lake, a protected area near Valencia. Viability markers as membrane integrity, culturability and β-galactosidase production of Aeromonas caviae were studied to determine the influence of the herbicide in the bacterial cells. Data from the multifactor analysis of variance test showed no significant differences (P > 0.05) between A. caviae counts of viability markers at the studied concentrations (0, 50 and 100 mg l⁻¹ of glyphosate).

The effects of Roundup^® on microbial biota present in the lake were assessed by measuring the number of indigenous mesophilic Aeromonas in presence of different amounts of the herbicide at 0, 50 and 100 mg l⁻¹ of glyphosate. In samples containing 50 and 100 mg l⁻¹ of glyphosate a significant (P < 0.05) increase in Aeromonas spp. counts and accompanying flora was observed.

The acute toxicity of Roundup^® and of Roundup^® diluted with Albufera lake water to Microtox^® luminescent bacterium (Vibrio fischeri) also was determined. The EC₅₀ values obtained were 36.4 mg l⁻¹ and 64.0 mg l⁻¹ of glyphosate respectively. The acidity (pH 4.5) of the herbicide formulation was the responsible of the observed toxicity.     

Sequential photochemical-biological degradation of chlorophenols

UV/TiO₂/H₂O₂, UV/TiO₂ and UV/H₂O₂ were compared as pre-treatment processes for the detoxification of mixtures of 4-chlorophenol (4CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) prior to their biological treatment. When each chlorophenol was initially supplied at 50 mg l⁻¹, UV/TiO₂/H₂O₂ treatment supported the highest pollutant removal, COD removal, and dechlorination efficiencies followed by UV/TiO₂ and UV/H₂O₂. The remaining toxicity to Lipedium sativum was similar after all pre-treatments. Chlorophenol photodegradation was always well described by a first order model kinetic (r² > 0.94) and the shortest 4CP, DCP, TCP and PCP half-lives of 8.7, 7.1, 4.5 and 3.3 h, respectively, were achieved during UV/TiO₂/H₂O₂ treatment. No pollutant removal was observed in the controls conducted with H₂O₂ or TiO₂ only. Inoculation of all the photochemically pre-treated mixtures with activated sludge microflora was followed by complete removal of the remaining pollutants. Combined UV/TiO₂/H₂O₂-biological supported the highest detoxification, dechlorination (99%) and COD removal (88%) efficiencies. Similar results were achieved when each chlorophenol was supplied at 100 mg l⁻¹. COD and Cl mass balances indicated UV, UV/H₂O₂, and UV/TiO₂ treatments lead to the formation of recalcitrant photoproducts, some of which were chlorinated.     

Biosorption of cadmium by Myriophyllum spicatum L. and Myriophyllum triphyllum orchard

The aim of this study was to characterize the biological treatment of heavy metal-contaminated water employing Myriophyllum species, namely M. spicatum L. and M. triphyllum. Both species were found to be capable of removing cadmium (Cd) from water; the latter significantly outperformed. Myriophyllum species were treated with 0, 2, 4, 6, 8, 16 mg l⁻¹ cadmium solutions for 24, 48, 72, 96 h, respectively. Cd uptake of both species was the lowest at 2 mg l⁻¹ and the highest at 16 mg l⁻¹. Concentration related cadmium stress on both species exhibit significant difference on pigment levels (8–16 mg l⁻¹). These findings contribute to the fact that submerged aquatic plants can be used for the removal of heavy metals.     

Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, -thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².

The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.