Effects of controller-pilot communication medium,flight phase and the role in the cockpit on pilots’ workload and situation awareness

This study explores the effects of communication medium, flight phase, and the role in the cockpit on pilots’ workload and situation awareness. Eight pilots with the experience of Controller-Pilot Data Link Communications (CPDLCs) participated in this simulated experiment. Two types of communication medium (voice and datalink), three types of flight phase (departure, cruise, and arrival), and two types of role (pilot flying and pilot non-flying) were investigated in the experiment. The results indicated that flight phase is a significant factor and cruise is the most suitable phase for datalink use on pilots’ acceptance, workload, and situation awareness performance. Both medium and role were not the significant factors. Since there is no significant difference on medium when no extra tasks and interferences involved in a normal flight, that the use of CPDLC can be justified during all phases of a no-event flight. In addition, the results of usability indicated that the simulated CPDLC with command selection functions proposed in this study provides good utility for the participants. In order to use the CPDLC for all phases of flight in the future, adding more command selection functions in place of typing messages by pilots and accommodating appropriate interfaces for different phases are recommended to enhance the usability of the CPDLC unit.     

Should the subjective be the objective? On studying mental processes,coping behavior,and actual exposures in organizational stress research

Emphasis on measuring actual (‘objective’) job exposures has increased in recent organizational behavior/human resource management research. I argue that this approach has greater potential for increasing knowledge about how to make work environments more healthy than the alternative approach of focusing on mental processes and individual coping behaviors suggested by Perrewe and Zellars. Incorporating psychological knowledge about attributions and emotions can enhance theory building in the organizational sciences. However, given that health outcomes are more strongly related to continuous exposures it may be better to focus on modal job content and general tendencies of individuals than to emphasize discrete events and specific, transitory states. Copyright © 1999 John Wiley & Sons, Ltd.     

Ergonomics and Quality Management—Humans in Interaction With Technology,Work Environment,and Organization

Abstract

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate imp ortan t ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elab orate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, in appropriate design of technology, and an unsuitable org an izatio n are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain sup po rt from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.     

The role of drug and alcohol use and the risk of motor vehicle crashes in Shiraz,Iran, 2014: A case–crossover study

Background: Traffic accidents and traffic-related injuries and mortality have become a major public health concern in Iran. This study aimed to examine the role of drug and alcohol use in motor vehicle accidents in Iran.

Methods: This case–crossover study was conducted on 441 drivers who survived a road traffic crash and were taken to the emergency department of Shahid Rajaee trauma hospital in Shiraz, southern Iran. Data were collected using checklists that included demographic characteristics and drug and alcohol use prior to driving. Alcohol and drug use was identified through self-report, and cannabis, morphine, and methamphetamine urine tests were used to confirm drug abuse among drivers.

Results: In total 17.9% of drivers reported using drugs (cannabis, opium, or metamphetamine) and 8.84% of drivers reported consuming alcohol prior to the collision. The crude odds ratios (ORs) for having a crash for opium, cannabis, and metamphetamine were 1.94 (95% interval confidence [CI], 1.11–3.38), 2.37 (95% CI, 1.03–5.42), 5.5 (95% CI, 1.21–24.81), respectively, and for all drugs was 3.83 (95% CI, 2.28–6.43). The OR for alcohol was 3.5 (95% CI, 1.73–7.06) based on self-report.

Conclusion: Drug and alcohol use are increasing the risk of traffic crashes in Iran. Risk-reducing programs must be designed and implemented.     

Investigating traffic fatality trends and restraint use among rear-seat passengers in the United States, 2000–2016

Introduction: Motor-vehicle crash is one of the leading causes of unintentional injury death in the United States. Previous studies focused on fatalities among drivers and front-seat passengers, with a limited number of studies examining rear-seat passenger fatalities. The objectives of this study were to assess trends in rear-seat passenger motor-vehicle fatalities in the United States from 2000 to 2016 and to identify demographic factors associated with being unrestrained among fatally injured rear-seat passengers. Methods: Rear-seat passenger fatality data were obtained from the Fatality Analysis Reporting System (FARS) database. The fatality rate ratios for overall rear-seat passengers and for different age and sex groups were determined by comparing fatality rates in 2000 and 2016 using random effects models. Risk ratios of being unrestrained for age and sex groups were obtained using general estimating equations. Results: Compared to 2000, the overall rear-seat passenger fatality rate in 2016 decreased by 44% (95% confidence interval [CI]: 39–49%). In particular, the fatality rate among rear-seat passengers decreased more in males than females, and passengers aged 14–19 years experienced a larger decline than all other age groups. Fatally injured male rear-seat passengers had a higher risk of being unrestrained (adjusted risk ratio: 1.06, 95% CI: 1.04–1.07) than their female counterparts, and both youngest (≤13 years) and oldest (65–85 years) passengers were less likely to be unrestrained than those aged 20–64 years. Conclusions: Overall, fatality rates among rear-seat passengers have declined, with differential degrees of improvement by age and sex. Practical Applications: Continued restraint use enforcement campaigns targeted at teenagers and males would further preserve them from fatal injuries and improve traffic safety for the overall population.     

What is the relationship between self-reported aberrant driving behaviors,mindfulness, and self-reported crashes and infringements?

Objectives: This study investigated the relationship between self-reported aberrant driving behaviors, mindfulness, and self-reported crashes and infringements.

Methods: Three hundred and eighteen participants (M = 46.0 years, SD = 13.7 years; female: 81.8%) completed an online survey that assessed aberrant driving behaviors, mindfulness (including regular mindfulness meditation [MM]), and self-reported crashes and infringements during the past 2 years. Structural equation modeling (SEM) was used to examine the relationship between self-reported aberrant driving behaviors and mindfulness simultaneously, as well as with participants' age and estimated kilometers driven over the past year.

Results: The results of the SEM showed that mindfulness was negatively related to each self-reported aberrant driving behavior, with the strongest relationships being between mindfulness and driving-related lapses (?0.58) and errors (?0.46). Participants who practice MM had significantly fewer crashes in the past 2 years and reported significantly fewer driving-related violations and lapses compared to participants who did not practice MM (crashes: 9.3% vs. 18.8%, P < .05; violations: M = 6.66 [SD = 3.44] vs. M = 7.68 [SD = 4.53], P < .05; errors: M = 5.17 [SD = 3.44] vs. M = 6.19 [SD = 4.12], P < .05).

Conclusions: More research is needed to understand whether MM results in more mindful and attentive drivers or whether individuals who practice MM may have other traits or behaviors that are linked to improved safety.     

“Hypersensitivity to Electricity” in the Office; Symptoms and Improvement

Nineteen persons “hypersensitive” to electricity and 20 nonafflicted persons were studied for 1 ½ years. The most discernible hypersensitivity symptoms were pricking sensations and redness in the face, but these symptoms were present in only half of the afflicted. Other symptoms were similar to symptoms experienced during office work and this study does not support the idea that electrosensitivity is one single syndrome. The “hypersensitive” persons improved significantly, mainly on neuropsychiatric symptoms, but the skin problems sustained— as did the belief about their cause. The afflicted persons used less conventional medication than the group of the nonafflicted, which suggests a general tendency for attribution to environmental factors.     

State helmet laws and helmet use among fatally injured moped riders in the United States, 2011–2015

Objective: Research has found that mandatory motorcycle helmet laws increase helmet use and reduce motorcycle-related fatalities. However, the association between state moped helmet laws and helmet use in the United States has not been examined. This study investigated this association among a census of fatally injured moped riders in the United States.

Methods: A logistic regression model was constructed to analyze data extracted from the Fatality Analysis Reporting System (FARS) to examine risk factors for helmet nonuse among 572 moped riders fatally injured between 2011 and 2015.

Results: Fatally injured moped riders in states with universal helmet laws had 69 times the odds of wearing a helmet (P < .001).

Conclusions: Findings suggest that universal moped helmet laws increase helmet use. However, additional research is needed to examine helmet laws and use among nonfatally injured moped riders.     

Occupational Safety Culture Index (OSCI)——measuring the community and employees awareness,attitude and knowledge towards workplace safety and health in Hong Kong SAR

Promoting occupational safety and health in Hong Kong,Special Administrative Region of China is an important and ongoing mission. As the major organization with statutory responsibilities,the Occupational Safety and Health Council understand the importance to strengthen and cultivate our safety culture. It is widely believed that numbers of occupational related diseases and injuries could be prevented with the improvement of the awareness and attitudes of the employees and the public. Therefore,a comprehensive and in-depth study to monitor the occupational health and safety level and status of the community and working population is needed. Objectives: Our Council has developed the Occupational Safety Culture Index ( OSCI) to measure the current level of community and workplace safety and health awareness,knowledge and attitude. Benchmarking measures of the key safety performance indicators are to be derived thereof. Methods: A territory-wide random telephone survey was conducted to assess the community and employees’awareness,attitude and knowledge in 2008. A structured questionnaire was designed with the content validity and reliability assessed before the survey administration. A series of quality control approaches were also applied to assure the quality of the fieldwork and the reliability of the data. Results: 1,531 eligible participants’data were collected and computed into 2 types of composite indices,Occupational Safety Culture Index ( Community) ( OSCIC) and Occupational Safety Culture Index (Workplace) (OSCIW) . With the maximum score of index at 100,the overall score of OSCIC is 66. 9 and the OSCIW is 61. 3 in Hong Kong. Achievements: OSCI served as an effective management tool to measure the safety culture in Hong Kong. With a representative sample and high quality study control and validated assessment approaches,the OSCI and the sub-indices are reliable indicators to assess the effectiveness of safety culture enhancement strategy and the OSH intervention measures.     

Gender differences in public office workers’ satisfaction,subjective symptoms and musculoskeletal complaints in workplace and office environments

This study investigates differences between male and female public office workers’ satisfaction levels, sick building syndrome (SBS) symptoms and musculoskeletal disorder (MSD) complaints in workplace and office environments. Questionnaire surveys were performed in 30 offices from 15 public institutions. Male and female workers of the same age were coupled and selected from each office, gathering a total of 120 male and 120 female subjects. The results show that differences exist between genders in noise and lighting satisfaction levels, SBS-related symptoms (eye, nose, skin) and MSD complaints of hand/wrist/finger, while there is no difference in overall satisfaction level of office environments. The study also suggests that office design for public office workers should take into account gender differences in preventing MSDs and also SBS. The findings of this study are expected to serve as basic data for designing effective public office environments.     

Exploring the linkage between the home domain and absence from work: Health,motivation, or both?

The aim of this study was twofold. First, we examined depleting and enriching effects of employees' home domain (home demands and quality time spent at home) on unscheduled absence from work. Second, we tested the assumption of the medical and withdrawal models that absence duration and frequency are uniquely predicted by respectively health condition and job motivation. We used longitudinal, different‐source data from 1014 employees. The results showed that home quality time was negatively related to absence frequency and duration in the following year through a physical pathway (less physical stress symptoms and health complaints) and through a psychological pathway (less psychological stress symptoms, increased job motivation). Employees with heavy home demands reported more physical and psychological stress symptoms, more health complaints, and lower job motivation. Accordingly, they had longer and more frequent sick leaves in the consecutive year. We conclude that the home domain adds to our understanding of absence from work. In addition, the model including cross pathways between health complaints and job motivation on the one hand, and absence frequency and duration on the other, best fitted the data. Thus, a clear distinction between volitional absence (frequency) and absence due to illness (duration) seems hard to justify. Copyright © 2012 John Wiley & Sons, Ltd.     

Unintentional injury deaths in children and youth, 2010–2019

Background: Unintentional injuries are the leading cause of death for children and youth aged 1–19 in the United States. The purpose of this report is to describe how unintentional injury death rates among children and youth aged 0–19 years have changed during 2010–2019. Method: CDC analyzed 2010–2019 data from the National Vital Statistics System (NVSS) to determine two-year average annual number and rate of unintentional injury deaths for children and youth aged 0–19 years by sex, age group, race/ethnicity, mechanism, county urbanization level, and state. Results: From 2010–2011 to 2018–2019, unintentional injury death rates decreased 11% overall—representing over 1,100 fewer annual deaths. However, rates increased among some groups—including an increase in deaths due to suffocation among infants (20%) and increases in motor-vehicle traffic deaths among Black children (9%) and poisoning deaths among Black (37%) and Hispanic (50%) children. In 2018–2019, rates were higher for males than females (11.3 vs. 6.6 per 100,000 population), children aged < 1 and 15–19 years (31.9 and 16.8 per 100,000) than other age groups, among American Indian or Alaska Native (AIAN) and Blacks than Whites (19.4 and 12.4 vs. 9.0 per 100,000), motor-vehicle traffic (MVT) than other causes of injury (4.0 per 100,000), and rates increased as rurality increased (6.8 most urban [large central metro] vs. 17.8 most rural [non-core/non-metro] per 100,000). From 2010–2011 to 2018–2019, 49 states plus DC had stable or decreasing unintentional injury death rates; death rates increased only in California (8%)—driven by poisoning deaths. Conclusion and Practical Application: While the overall injury death rates improved, certain subgroups and their caregivers can benefit from focused prevention strategies, including infants and Black, Hispanic, and AIAN children. Focusing effective strategies to reduce suffocation, MVT, and poisoning deaths among those at disproportionate risk could further reduce unintentional injury deaths among children and youth in the next decade.     

Fatal accidents in Swedish farming and forestry, 1988–1997

It has long been acknowledged that farm work is associated with accident risks. In this investigation it has been determined how these risks have changed over the past 10-year period, and how different factors have affected the risk pattern. All the registered accidents forming the basis for this study (ISA, The Occupational Safety and Health Administration) were supplemented with information obtained from the Labor Inspectorate, police, Occupational Health Services, and in many cases, persons from the district having information about the accident. The number of fatal accidents occurring at work is decreasing in Sweden and in many other countries. This, however, is not true for Swedish farm and forestry operations. The frequency of fatal accidents is 11.6 per year per 100,000 persons among those with farming as a main occupation, and 13.6 among those with forestry as a main occupation, and the trend appears to be on the increase. In addition, a number of farmers, persons with other occupations, or senior citizens (mostly retired farmers) also meet with fatal accidents, primarily in forestry. Access or membership in occupational health schemes was lower than expected among the victims. Even among the employed forestry workers, only a minority had access. More than half of the accidents were due to either the victim or a fellow worker not following generally known rules or recommendations.     

The critical runaway condition and stability criterion in the phenol–formaldehyde reaction

The procedure of phenol–formaldehyde polymerization is a rather important and complicated reaction in the chemical industry. This exothermic polymeric reaction releases a huge amount of heat. The high amount of energy accumulated and increasing temperature in this reaction process always lead to runaway reaction and a hazard situation owing to the high released heat and improper operation. In this investigation, we used sodium hydroxide as alkali–catalyst in the phenol–formaldehyde polymerization and estimated the reaction kinetics parameters to evaluate the thermal hazard conditions. The critical temperatures and stable criteria of the runaway reaction in this exothermic polymerization were evaluated. This technique is important and useful for safe operation in the phenol–formaldehyde polymerization process.     

A survey of forest workers in New Zealand. Do hours of work, rest, and recovery play a role in accidents and injury?

PROBLEM: A number of structural and organizational changes have occurred recently within the New Zealand Forestry Industry, with concerns being raised about the impact of these changes on the forestry worker in terms of fatigue, sleepiness, and compromised safety. This study explored the relationship of fatigue, and some of its key determinants, with accidents and injuries in a group of forestry industry workers in New Zealand. METHOD: A total of 367 forestry workers responded to a self-administered questionnaire. RESULTS: Fatigue was found to be commonly experienced at work in the forest, with 78% of workers reporting that they experienced fatigue at least "sometimes." This study found that certain groups of workers reported long working hours, reduced sleep, compromised recovery time, and intensely paced work. The results of logistic regression analysis showed that recent sleep, number of breaks taken during the workday, and specific job/tasks were independently associated with reporting of high fatigue levels at work. Near-miss injury events were significantly more common among those reporting a high level of fatigue at work. Accidents and lost-time injury were associated with length of time at work, ethnicity, and having had near-miss injury events. DISCUSSION: Together, these results suggest that fatigue and aspects of work organization, which are likely to be fatiguing, may be associated with compromised safety for forest workers. IMPACT ON INDUSTRY: With an already slim margin of error present in forest operations, an impairment due to increased fatigue may constitute a significant risk factor for accidents and injuries in this workforce. The results indicate the need for further examination of shift and workload management among forestry workers, as well as a role for improving industry awareness about the causes and consequences of fatigue.     

Risk and characteristics analysis of the flow-induced vibration of the dip tube in opposed multi-burner gasifier

The vibration of dip tube in multi-burner gasifier changes the stress at the connection, causing flange seal failures and high temperature gas erosions with heavy economic losses and industrial accidents. This work aims to reveal the dip tube vibration mechanism, with special focus on obtaining the effect of operational parameters on the fatigue damage and long-term stable operation of gasifiers. A three-dimensional numerical simulation of the water-scrubbing cooling chamber was conducted to obtain the excitation source in the flow field. Then a FSI (fluid-structure interaction) transient dynamics simulation was carried out to investigate the vibration characteristics. Two major flow forms were found: a vertical annular flow near the dip tube outlet in the water-scrubbing cooling chamber; and a gas-liquid coupled flow caused by the syngas entrained the liquid. These two unstable multiphase flow forms exerted an energy excitation on the dip tube, resulting in a self-excited flutter. The dip tube vibration was similar to the first mode of a cantilever beam. The peak frequency was less affected by the initial liquid level and the syngas stream inlet velocity, which was close to its own first natural frequency. Note that, the alternating load generated by vibration may cause fatigue damage, which needs to be specifically considered in the design and manufacturing process of opposed multi-burner gasifier.     

Recognition primed decision making and the organisational response to accidents: Überlingen and the challenges of safety improvement in European air traffic management

The pioneering work of Rasmussen, Reason and their colleagues has greatly improved our understanding of the longer term causes of adverse events in safety-critical systems. Far less attention has been paid to the organisational decision making that characterises the response to accidents and incidents. Therefore, this paper examines the interventions by national and international agencies after one of the most serious accidents in European Air Traffic Management. Insights from Naturalistic Decision Making (NDM) and Recognition Primed Decision Making (RPDM) are used to explain the complex ways in which technical, organisational and political constraints shape and support the decisions and actions taken by different agencies. These constraints affect national and international safety organisations in the aftermath of major accidents. In particular, this paper uses NDM and RPDM to assess the interventions made by Swiss Federal agencies and by the Air Navigation Service provider (ANSP) following the Überlingen mid-air collision in July 1st 2002. Later sections show that there are strong similarities between the technical, organisational and political constraints that informed their decisions and the factors that directed the work of the European Organisation for the Safety of Air Navigation (EUROCONTROL). Some of EUROCONTROL’s safety responsibilities (i.e. the safety regulation elements) will in the future pass to the European Aviation Safety Agency (EASA), an Agency of the European Commission. This transfer of responsibilities has the potential to increase the powers available to ensure the implementation of recommendations following future accidents. At the same time there is a danger that key aspects of existing safety and regulatory activities may be overlooked. It is critical, therefore, that the same level of audit and monitoring be conducted on the European agencies during the transition period as is proposed for service providers and national regulatory agencies. It is important to ensure that these changes do not inadvertently lead to the loss of insights from previous adverse events.     

The influence of ClO− and acidity in the reaction between H2O2 and CuCl2

The potentially explosive reaction of hydrogen peroxide (H₂O₂) and copper chloride (CuCl₂) was investigated. Pressure tests revealed that the reaction was strongly temperature - dependent and can easily undergo runaway reaction. Nevertheless, there was only a slight pressure increase at the low temperatures studied or when using low concentrations of CuCl₂. Under the conditions generating the slight pressure increase, hypochlorite anions (ClO⁻) are generated and the acidity increases. As the reaction reaches completion, ClO⁻ disappears, and the acidity decreases. Interestingly, the addition of phosphate buffer to maintain the weakly acid conditions led to a runaway reaction, and the use of basic ClO⁻ promoted the exothermic reaction. Based on the results, acidity has a strong impact on the reaction behaviour.     

Portable ladder assessment tool development and validation – Quantifying best practices in the field

Many causes for falls from ladders in construction are related to the user’s activities; however, the extent to which users comply with ladder use best practices is unknown and has not been well quantified before. We developed and tested an audit tool that assesses compliance with best practices guidelines for portable-ladder-use designed for applications in the construction industry. Implemented on a hand-held computer, the assessment tool consisted of a series of check-lists categorized in four groups; ladder condition, setup, moving on a ladder, and completing tasks from a ladder. For these four observational categories, the resulting tool contained 31 and 33 questions for step and extension ladders, respectively. Three individuals trained to use the tool scored a set of photographs and videos depicting 25 ladder conditions, 20 ladder setups, 10 users moving on ladders, and 13 users completing tasks from a ladder for a total of 78 observations. The assessment tool had good agreement across and within raters. For the three raters, agreement ranged from 79% to 97% across the questions. Within one subject, kappa coefficients for the intra-rater reliability ranged from 0.67 to 0.91. The tool offers a practical method to quantify best practices associated with ladder use that can ultimately inform targeted intervention efforts.