8, respectively) and

2±0.112, respectively) and CON group(0.538±0.132 and 0.323±0.107, respectively), P< 0.05. The level of PPARγ mRNA were lower in AMI (0.391±0.101) and UAP (0.396±0.093) groups than in SAP (0.555±0.152) and CON (0.625±0.223)groups, P<0.05. Conclusions The expr     

Ergonomics and Quality Management—Humans in Interaction With Technology,Work Environment,and Organization

Abstract

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate imp ortan t ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elab orate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, in appropriate design of technology, and an unsuitable org an izatio n are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain sup po rt from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.     

What is the relationship between self-reported aberrant driving behaviors,mindfulness, and self-reported crashes and infringements?

Objectives: This study investigated the relationship between self-reported aberrant driving behaviors, mindfulness, and self-reported crashes and infringements.

Methods: Three hundred and eighteen participants (M = 46.0 years, SD = 13.7 years; female: 81.8%) completed an online survey that assessed aberrant driving behaviors, mindfulness (including regular mindfulness meditation [MM]), and self-reported crashes and infringements during the past 2 years. Structural equation modeling (SEM) was used to examine the relationship between self-reported aberrant driving behaviors and mindfulness simultaneously, as well as with participants' age and estimated kilometers driven over the past year.

Results: The results of the SEM showed that mindfulness was negatively related to each self-reported aberrant driving behavior, with the strongest relationships being between mindfulness and driving-related lapses (?0.58) and errors (?0.46). Participants who practice MM had significantly fewer crashes in the past 2 years and reported significantly fewer driving-related violations and lapses compared to participants who did not practice MM (crashes: 9.3% vs. 18.8%, P < .05; violations: M = 6.66 [SD = 3.44] vs. M = 7.68 [SD = 4.53], P < .05; errors: M = 5.17 [SD = 3.44] vs. M = 6.19 [SD = 4.12], P < .05).

Conclusions: More research is needed to understand whether MM results in more mindful and attentive drivers or whether individuals who practice MM may have other traits or behaviors that are linked to improved safety.     

Accidents, claiming, and regional subcultures: are medical errors and malpractice lawsuits related to social capital?

METHOD: This study examined states' performance on Patient Safety Indicators (PSIs), statistics on malpractice lawsuits, and analogous data on automobile accidents to identify state-level patterns in safety and claiming. RESULTS: Hospital safety varied in a pattern similar to highway safety on the state level, suggesting that cultural traits may play a greater role than differences in legal or other environmental factors. States performing well or poorly in hospital and driver safety tended to correspond with states grouped together in regional culture typologies developed by Elazar and Lieske. Traits of regional culture also are associated with variations in tort claiming. CONCLUSIONS: The paper offers a theory of social capital as an important factor affecting safety and tort claiming. Where the regional culture is one of high cohesion and trust, people may exercise a higher degree of caution and vigilance in their interaction with others, and feel less inclination to file lawsuits subsequent to accidents.     

The missing link? Implications of internal,external, and relational attribution combinations for leader–member exchange,relationship work,self‐work,and conflict

Attributions are causal explanations made by individuals in response to important, novel, and/or unexpected events. Numerous attribution theories have examined how people use information to make attributions and how attributions impact an individual's subsequent emotions and outcomes. However, this research has only recently considered the implications of dyadic‐level attributions (i.e., relational attributions), particularly in the context of leader–follower relationships in organizations. Therefore, the purpose of this theoretical paper is threefold. First, we integrate research on attributional biases into the research on relational attributions. Second, we integrate and extend attribution theory to consider the implications of convergent and divergent internal, external‐person, external‐situational, and relational attributions for leader–member exchange (LMX) quality, relationship work, self‐work, and conflict. Third, we make the implicit ranking of attribution combinations and the resultant levels of relationship work explicit. In doing so, we contribute to attribution theory and research by proposing how attribution combinations produce positive and negative outcomes that are both intrapersonal and interpersonal. Further, we contribute to the LMX literature by explicating how leader–follower attribution combinations influence relationship quality.     

Synergism of Ergonomics,Safety, and Quality—A Behavioral Cybernetic Analysis

Abstract

This report extends a control systems or cybernetic model of behavior to the behavior of groups of many individuals—organizations and institutions—operating together with technology as complex sociotechnical (ST) systems. The premise is that the level of quality in performance of a complex ST system is predicated upon the degree to which its organizational design incorporates elements of a closed-loop behavioral control system: control goals and objectives, sensory receptors, sensory feedback, learning and memory, effectors, and sensory feedback control. From a control systems perspective, ergonomics is essential to effective organizational self-regulation. If working conditions are poorly designed, work performance and safety and quality outcomes cannot be closely controlled. Conversely, as shown by field evidence, good design promotes synergism between ergonomics, safety, and quality as a closed-loop consequence of effective employee and organizational self-control of system performance, safety, and quality.     

Taxi driver speeding: Who,when, where and how? A comparative study between Shanghai and New York City

Objective: The 3 objectives of this study are to (1) identify the driving style characteristics of taxi drivers in Shanghai and New York City (NYC) using taxi Global Positioning System (GPS) data and make a comparative analysis; (2) explore the influence of different driving style characteristics on the frequency of speeding (who and how?) and (3) explore the influence of driving style characteristics, road attributes, and environmental factors on the speeding rate (when, where, and how?)

Methods: This study proposes a driver–road–environment identification (DREI) method to investigate the determinant factors of taxi speeding violations. Driving style characteristics, together with road and environment variables, were obtained based on the GPS data and auxiliary spatiotemporal data in Shanghai and NYC.

Results: The daily working hours of taxi drivers in Shanghai (18.6 h) was far more than in NYC (8.5 h). The average occupancy speed of taxi drivers in Shanghai (21.3 km/h) was similar to that of NYC (20.3 km/h). Speeders in both cities had shorter working hours and longer daily driving distance than other taxi drivers, though their daily income was similar. Speeding drivers routinely took long-distance trips (>10 km) and preferred relatively faster routes. Length of segments (1.0–1.5 km) and good traffic condition were associated with high speeding rates, whereas central business district area and secondary road were associated with low speeding rates. Moreover, many speeding violations were identified between 4:00 a.m. and 7:00 a.m. in both Shanghai and NYC and the worst period was between 5:00 a.m. and 6:00 a.m. in both cities.

Conclusions: Characteristics of drivers, road attributes, and environment variables should be considered together when studying driver speeding behavior. Findings of this study may assist in stipulating relevant laws and regulations such as stricter offense monitoring in the early morning, long segment supervision, shift rule regulation, and working hour restriction to mitigate the risk of potential crashes.     

How have we,do we,and will we measure time perspective? A review of methodological and measurement issues

Despite the demonstrated importance of time perspective on key outcomes, its growing popularity, and its wide reach in terms of samples and disciplines, the construct has been plagued with definitional and measurement problems since its inception. Given the historical and current confusion regarding both conceptualization and operationalization, the purpose of this article is to provide an overview of methodological and measurement issues related to time perspective. Clearly, definitional and measurement clarity are critical for the success of future research. Through integrating the fragmented and eclectic time perspective literature fraught with ambiguity, we help to clarify measurement options and their psychometric evidence for future researchers. Specifically, we provide an in-depth comparison of four (and their offshoots) commonly used, scale-based measures of time perspective with respect to their dimensional content, psychometric properties, and validation evidence. We end with recommendations for time perspective research.     

The Relationship Between Workers’ Safety Culture and Accidents,Near Accidents and Health Problems

One of the dimensions treated as part of a company’s safety culture or climate is workers’ attitudes towards risk and safety. In the present study these personal aspects are defined as workers’ safety culture, which is understood as a way of acting focused on life and taking care of one’s health. A questionnaire on safety culture was filled out by 200 employees of a metallurgical enterprise. Factor analysis was used to determine empirical scales of the questionnaire, whereas variance analysis was used to test hypotheses. The results confirmed the hypotheses that people who experienced accidents, dangerous situations, and—to a lesser extent—health problems had a lower level of safety culture. Nevertheless not all of the scales determined during factor analysis turned out to be significant as far as all kinds of those undesirable situations are concerned. Proposals for future studies are formulated in the conclusion.     

Characteristics of crashes and injuries among 14 and 15 year old drivers,by rurality

Purpose: Motor-vehicle crashes continue to be the leading cause of death for teenagers in the United States. The United States has some of the youngest legal driving ages worldwide. The objective of this study was to determine rates and factors associated with injury crashes among 14- and 15-year-old drivers and how these varied by rurality. Methods: Data for this cross-sectional study of 14- and 15-year-old drivers were obtained from the Iowa Department of Transportation from 2001 to 2013. Crash and injury crash rates were calculated by rurality. The relationship between crash and driver factors and injury was assessed using logistic regression. Findings: Teen drivers, aged 14 and 15 years, had a statewide crash rate of 8 per 1,000 drivers from 2001 to 2013. The majority of crashes occurred in urban areas (51%), followed by in town (29%), remote rural areas (13%), and suburban areas (7%). Crash and injury crash rates increased as level of rurality increased. The odds of an injury crash increased more than 10-fold with the presence of multiple other teens as passengers, compared to no passengers (OR = 10.7, 95% CI: 7.1–16.2). Conclusions: Although 14- and 15-year-old drivers in Iowa have either limited unsupervised (school permits) or supervised only driving restrictions, they are overrepresented in terms of crashes and injury crashes. Rural roads and multiple teen passengers are particularly problematic in terms of injury outcomes. Practical applications: Results from this study support passenger restrictions and teen driving interventions designed with a rural focus.     

Calorimetry studies of ammonium nitrate – Effect of inhibitors,confinement, and heating rate

Ammonium nitrate (AN) has been widely used as a fertilizer for almost a century because it is an excellent nitrogen source. However, AN related explosions continue to occur time and again, despite the fact that AN has been extensively investigated. There have been more than 70 AN-related incidents during the last century, which reemphasize the dire need for further research on AN reactive hazards. This research focuses on the alternatives to make AN safer as a fertilizer by reducing its explosivity, by studying the effect of inhibitors, confinement, and heating rate on AN thermal decomposition using the Reactive Systems Screening Tool (RSST). First, the thermal decomposition of AN in the presence of different types of additives, including sodium bicarbonate, potassium carbonate, and ammonium sulfate, was studied under two concentrations, i.e., 2.8 wt.% and 12.5 wt.%. The results show that they are good inhibitors for AN. Second, the effect of confinement was tested by observing AN decomposition under five different initial pressures, varying from ambient pressure to 187 psig. It is concluded that confinement is dangerous to AN, which should be avoid in AN storage and transportation. Lastly, the effect of heating rate was studied by heating up AN under two heating rates of 0.25 °C min⁻¹ and 2 °C min⁻¹. The lower the heating rate, the lower the “onset” temperature detected.