火电厂石膏雨治理方案的研究与应用

采用石灰石—石膏湿法烟气脱硫工艺的火电厂,在湿烟囱排放过程中易出现石膏雨现象.分析了石膏雨形成的原因,并从运行调整的角度分析了缓解石膏雨的有效措施,提出了通过调整除雾器和吸收塔浆液喷嘴布置消除石膏雨的改造方案.     

无GGH湿法脱硫工艺的“石膏雨”防治设计与运行优化

为了解决火力发电厂无GGH湿法脱硫工艺出现的“石膏雨”问题,神华万州发电厂从脱硫吸收塔内部流场调整、结构设置、烟气流速、边界条件设定、烟囱结构优化等方面进行设计和优化运行,在很大程度上减少了湿法脱硫的“石膏雨”现象的发生。     

火电厂脱硫吸收塔临时烟囱的选型设计

为了解决不设置烟气加热设备（以下简称GGH）后电厂主烟囱防腐和烟道改造施工而影响机组正常运行这一难题,在脱硫塔顶部设置临时烟囱排放烟气。以安阳电厂烟气脱硫工程为实例,从工艺、环境影响、制造和施工安装等方面具体介绍了脱硫吸收塔临时烟囱的设计,为不设GGH的脱硫技改工程提供参考。     

加拿在Lambton电厂湿式石灰石：———石膏脱硫工艺的运行经验

介绍了加拿大Ｌａｍｂｔｏｎ电厂的两套石灰石－－石膏法烟气脱硫系统的工艺流程,系统运行初期出现的主要问题及采取的解决措施,包括吸收塔内衬的渗漏、喷嘴的堵塞、烟道的改造、氧化槽壁面结垢和玻璃纤维喷啉管道的磨损等问题。     

石横一期烟囱冲洗水及排液系统改造

介绍了石横电厂一期烟气脱硫技改项目中烟囱及入口烟道排液系统改造情况,论述了烟囱及烟道排液系统改造要点、运行方式,提出了烟囱排液系统的改造方案。     

湿法烟气脱硫吸收塔系统的设计和运行分析

详细介绍了广东省连州电厂石灰石／石膏湿法烟气脱硫吸收塔系统的流程，设备，吸收塔内部结构、防腐措施等设计情况，同时对系统的运行状况进行了分析。     

FGD系统中吸收塔浆液起泡溢流的原因分析及解决办法

在石灰石-石膏湿法烟气脱硫（FGD）工艺系统中,吸收塔浆液溢流是较为常见的现象,它对FGD系统的稳定运行非常不利。通过分析产生吸收塔浆液溢流的各种原因,提出解决吸收塔浆液溢流的办法,保证脱硫系统的稳定运行。     

湿法脱硫系统运行中存在问题探讨

分析了石灰石—石膏湿法脱硫系统中烟气系统、吸收塔系统、石灰石系统、石膏脱水系统、废水处理系统等在运行中存在问题,并提出了相应的对策。     

取消旁路烟道的烟气脱硫方案技术经济比较

以岳阳电厂三期工程为例,介绍了石灰石―石膏湿法脱硫系统取消旁路烟道后,为解决锅炉启停时的烟气排放,提出了电除尘器并联40%锅炉负荷烟气量的水膜除尘器、一炉二塔和增加40%锅炉负荷烟气量的吸收塔等三种方案。比较结果表明,方案一可靠性差、投资最高,方案二可靠性较高、投资最低,方案三可靠性最高、投资适中,且对燃煤硫分变化的适当性最强。     

无GGH湿法烟气脱硫系统烟囱石膏雨的影响因素及策略研究

燃煤电厂脱硫设施90％以上机组均采用石灰石-石膏湿法脱硫工艺.由于堵塞和腐蚀等问题,近年大部分新建脱硫装置均取消GGH装置,但在运行过程中出现了“石膏雨”问题.通过分析湿法烟气脱硫“石膏雨”产生的影响因素,提出了环境约束条件下效益—成本最大化的“石膏雨”控制策略.     

Photo-oxidation and Photo-toxicity of Crude and Refined Oils

The fate and effects of an oil spill are effected by solar radiation through the action of photo-oxidation and photo-toxicity. Photo-oxidation, an important process in the weathering of oil, produces a variety of oxidized compounds, including aliphatic and aromatic ketones, aldehydes, carboxylic acids, fatty acids, esters, epoxides, sulfoxides, sulfones, phenols, anhydrides, quinones and aliphatic and aromatic alcohols. Some of these compounds contribute to the marine biota toxicity observed after an oil spill. Photo-toxicity occurs when uptake of certain petroleum compounds, e.g. certain polycyclic aromatic hydrocarbons and benzothiophenes, is followed by solar exposure which results in much greater toxicity than after dark uptake. The mechanism of PAH photo-toxicity includes absorbance of solar radiation by the PAH which produces a free radical and this free radical in turn reacts with oxygen to produce reactive oxygen species that can damage DNA and other cellular macromolecules. While most studies on photo-toxicity have been carried out in the laboratory, there are studies showing that water from an oil spill is photo-toxic to bivalve embryos for at least a few days after the spill. Other studies have found that oil contaminated sediments are photo-toxic to several marine invertebrates. More studies are required to determine if marine fauna at an oil spill site are effected by the action of photo-toxicity and photo-oxidation.     

电厂建设运行中的水土流失预测与水土保持设计

在燃煤电厂建设运行的同时,将引起一系列的水土流失问题.以四川国电金堂电厂二期扩建工程为例,简要说明项目区水土流失预测的内容和方法,并在其基础上对可能产生的水土流失和危害进行了分析,同时介绍了建设期和运行期采取的综合防治措施,为类似工程的水土保持提供借鉴.     

磷对环境的污染及防治对策

我国水体富营养化严重，其主要控制因子是磷。在分析磷污染的污染状况，污染源的基础上，介绍了防治对策，采用低磷循环冷却水处理剂，减少磷排放，是防止工业磷污染的有效方法。     

北京市居民衣服消费处置及对其回收利用认识调查与分析

首先对北京市居民每年购买新衣服的数量、支出、穿着时间、淘汰原因,以及闲置衣服的处理方式、数量等进行了调查与分析,然后对北京市居民对旧衣物回收利用的认识、回收形式及其处理方式,对旧衣物如何处理回收、再利用的担忧,对希望旧衣物回收箱摆放的场所等进行了调查与分析。其研究结果对废旧纺织品回收体系建设、制度及政策制定具有一定的参考价值。     

硫磺回收装置扩能改造及效果分析

介绍了回收酸性气体生产硫磺的工艺原理与工艺流程,论述了影响硫磺回收装置生产能力的诸多因素与扩能改造的情况。扩能改造后,该装置的酸性气体处理量平均为976m^3／h,瞬时处理量可达1200m^3／h,硫磺的生产能力从4450t／a提高到7500t／a,生产能力提高了68．5％,装置总硫回收率达到93．5％。     

微生物絮凝剂及其在水处理中的应用

近年来对微生物絮凝剂的研究不断深入，新的高效菌种不断被发现。简要介绍了微生物絮凝剂的絮凝机理、分关、絮凝效果及影响因素，重点介绍了新型微生物絮凝剂在水处理中的应用。     

Chemical and Microbiological Characteristics of Mineral Spoils and Drainage Waters at Abandoned Coal and Metal Mines

Mining is a long-established human activity. Abandonedmines, tailings, and mine spoils may have considerable impacton neighboring environments long after the sites are abandoned. Of greatest concern are derelict mines and wastes that generateacidic discharge waters that are enriched with iron and othermetals and metalloids. The chemistry and microbiology of thesesites are intricately intertwined. Whilst some indigenousmicroorganisms are responsible for accelerating sulfide mineraloxidation, thereby generating acidity and mobilizing metals,others catalyze reductive processes that essentially reversethese reactions and thereby ameliorate polluted mine waters.This article reviews current knowledge on the chemistry and microbiology of abandoned coal and metal mines, mine spoils and tailings.     

含氟化物及沥青的烟尘治理

铝厂排出的含有氟、氟化物、沥青的烟气及粉尘、使植物、家畜受到危害,引起氟中毒。应用沥青混凝聚装置和静电回收净化技术,既能净化有害烟气又能回收有价值的工业原料。     

Synthesis and Characterization of Polyols and Polyurethane Foams from PET Waste and Crude Glycerol

In this study, polyethylene terephthalate (PET) waste from post-consumer soft-drink bottles and crude glycerol from the biodiesel industry were used for the preparation of polyols and polyurethane foams. PET waste was firstly depolymerized by the glycolysis of diethylene glycol. The glycolyzed PET oligomers were then reacted with crude glycerol at different weight ratios to produce polyols via a series of reactions, such as esterification, transesterification, condensation, and polycondensation. The polyols were characterized by titration, viscometry, gel permeation chromatography (GPC), and differential scanning calorimetry. Subsequently, polyurethane (PU) foams were made via the reaction between the produced polyols and polymeric methylene-4,4′-diphenyl diisocyanate and were characterized by mechanical testing, scanning electron microscopy, and thermogravimetric analysis. Polyols from crude glycerol and their PU foams were also prepared to compare properties with those of polyols and PU foams from PET and crude glycerol. The influence of aromatic segments existing in glycolyzed PET and glycerol content on the properties of the polyols and PU foams was investigated. It was found that aromatic segments of polyols from glycolyzed PET helped increase their molecular weights and improve thermal stability of PU foams, while high glycerol content in polyols increased the hydroxyl number of polyols and the density and compressive strength of PU foams.     

Dialdehyde starch and zein plastic: Mechanical properties and biodegradability

Dialdehyde starch (DAS) and zein, a hydrophobic corn protein, were investigated to produce biodegradable plastics with improved water resistance and mechanical properties. In the study, dialdehyde starch and zein ratio, plasticizers, and degree of starch oxidation were examined. Increased molding temperature and level of starch oxidation decreased water absorption of the plastic. Tensile strength and Young's modulus increased with starch oxidation. The biodegradation of starting materials and ground plastic specimens was studied in aerobic soil reactors maintained at 25°C for 180 days. Biodegradation of corn starch, zein, and dialdehyde starch for 180 days produced CO₂ equivalent to 64, 63, and 10% of theoretical carbon, respectively. Specimens of molded DAS and zein (3 : 1) plastic showed accelerated CO₂ evolution compared to DAS and other raw materials alone. By 180 days, specimens made with starch of low oxidation (1 and 5% oxidized) demonstrated a 60% biodegradation, and specimens with highly oxidized starch (90% oxidized) achieved 37% biodegradation.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Journal Paper J-15927 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Project No. 3258.