The origin of atmospheric lead in Oslo,Norway, studied with the use of isotopic ratios

Application of the lead isotope method to differentiate between the local contribution of lead and its portion from long-range transport of air pollution from sources a few thousand kilometers away to the lead pollution level measured in the Oslo area in Norway is discussed. The ²⁰⁶Pb/²⁰⁴Pb ratio is of particular interest in this respect. The results of measurements presented in the paper show that phase-out of lead additives to gasoline in Northern Europe has not phased out the Pb contamination of the environment. The lead isotope method proved very useful to present a contribution of small local sources to the Pb contamination of the air in the Oslo area during the period when the combustion of gasoline, the major source of Pb contamination has been decreasing. Wood combustion is one of these sources in Norway. Lower impact of long-range transport of air pollutants emitted from sources in Eastern and Central Europe and transported with air masses to Scandinavia, during the recent 5 years, can also be traced utilizing isotopic ratios of lead. The application of tree-rings as environmental archives contributed significantly to elucidating the historical Pb pollution.     

Product: Guide/1981

Abstract

The impact of weather on air pollution was examined and evaluated for the city of Athens, Greece. We used an objectively defined synoptic classification scheme consisting of six summer and eight winter circulation types. This scheme was established using a combination of both factor and cluster analysis during 1954–1999. Surface and isobaric levels of 850 hPa data were used. Factor analysis combined with cluster analysis was used to derive circulation types based on surface meteorological data for the period 1954–1999 in Athens and on surface pressure grid data. The city was divided into three sectors according to the financial and social activities of the residents. To examine the spatial characteristics of pollutant concentrations over Athens for each synoptic type, the synoptic circulation types were then correlated with both gaseous and particulate pollutant concentrations measured in each sector between 1983 and 1999. Finally, extreme and severe episodic events were studied in terms of their meteorological and synoptic characteristics.     

Sediment evidence of early eutrophication and heavy metal pollution of Lake Mälaren, central Sweden

Lake M?laren is the water supply and recreation area for more than 1 million people in central Sweden and subject to considerable environmental concern. To establish background data for assessments of contemporary levels of trophy and heavy metal pollution, sediment cores from the lake were analyzed. Diatom-inferred lake-water phosphorus concentrations suggest that pre-20th century nutrient levels in S?dra Bj?rkfj?rden, a basin in the eastern part of M?laren, were higher (c. 10-20 micrograms TP L-1) than previously assumed (c. 6 micrograms TP L-1). Stable lead isotope and lead concentration analyses from 3 basins (S. Bj?rkfj?rden, Gisselfj?rden and Ask?fj?rden) show that the lake was polluted in the 19th century and earlier from extensive metal production and processing in the catchment, particularly in the Bergslagen region. The lake has experienced a substantial improvement of the lead pollution situation in the 20th century following closure of the mining and metal industry. The lead pollution from the old mining industry was large compared to late-20th century pollution from car emissions, burning of fossil fuels and modern industries.     

Analysis of the impact of the forest fires in August 2007 on air quality of Athens using multi-sensor aerosol remote sensing data,meteorology and surface observations

Data from multiple satellite remote sensors are integrated with ground measurements and meteorological data to study the impact of Greek forest fires in August 2007 on the air quality in Athens. Two pollution episodes were identified by ground PM₁₀ measurements between August 23 and September 4. In the first episode, Evia and Peloponnese fires contributed substantially to the air pollution levels in Athens. In the second episode, transport of industrial pollution from Italy and Western Europe as well as forest fires in Albania contributed substantially to the air pollution levels in Athens. Local air pollution sources also contributed to the observed particle levels during these episodes. Satellite data provide valuable insights into the spatial distribution of particle concentrations, thus they can be used identify pollution sources. In spite of a few weaknesses in current satellite data products identified in this analysis, combining satellite aerosol remote sensing data with trajectory models and ground measurements is a powerful tool to study intensive particle pollution events such as forest fires.     

Investigating weekend air quality observations with the aid of Fourier analysis in Athens, Greece

Weekend air quality is analysed with the aid of Fourier analysis, in order to reveal time-series structures for Athens, Greece. For this reason, an appropriate analysis of a 10 year record from 1990–1999 of air quality data from the monitoring network in Athens is carried out for two specific monitoring sites. The aim of the paper is to investigate the temporal pattern of observations in order to reveal relations and trends. Thus, it is expected that the estimation of environmental consequences related to various incentives aimed at the reduction of air emissions will be enriched. The aim of the current work is also to demonstrate that the analysis of weekend air quality monitoring data records is an appropriate method for estimating the temporal variation of air pollution in urban agglomerations, based on appropriate approximations.     

Isotopes as tracers of sources of lead and strontium in aerosols (TSP & PM2.5) in Beijing

Even after its being phased out in gasoline in the late 90s, lead (Pb) is still present at relatively high levels in the atmosphere of Beijing, China (0.10–0.18 μg m^?3). Its origin is subject to debate as several distinct sources may contribute to the observed pollution levels. This study proposes to constrain the origin(s) of Pb and strontium (Sr) in aerosols, by coupling both Pb and Sr isotope systematics. The characterisation of the main pollution sources (road traffic, smelters, metal refining plants, coal combustion, cement factories, and soil erosion) shows that they can unambiguously be discriminated by the multi-isotope approach (²⁰⁶Pb/²⁰⁴Pb and ⁸⁷Sr/⁸⁶Sr). The study of total suspended particulates (TSP) and fine particles (PM_2.5) from Beijing and its vicinity indicates that both size fractions are controlled by the same sources. Lead isotopes indicate that metal refining plants are the major source of atmospheric lead, followed by thermal power stations and other coal combustion processes. The role of this latter source is confirmed by the study of strontium isotopes. Occasionally, emissions from cement plants and/or input from soil alteration are isotopically detectable.     

On the relation between seasonal synoptic circulation types and spatial air quality characteristics in Athens,Greece

The impact of weather on air pollution was examined and evaluated for the city of Athens, Greece. We used an objectively defined synoptic classification scheme consisting of six summer and eight winter circulation types. This scheme was established using a combination of both factor and cluster analysis during 1954-1999. Surface and isobaric levels of 850 hPa data were used. Factor analysis combined with cluster analysis was used to derive circulation types based on surface meteorological data for the period 1954-1999 in Athens and on surface pressure grid data. The city was divided into three sectors according to the financial and social activities of the residents. To examine the spatial characteristics of pollutant concentrations over Athens for each synoptic type, the synoptic circulation types were then correlated with both gaseous and particulate pollutant concentrations measured in each sector between 1983 and 1999. Finally, extreme and severe episodic events were studied in terms of their meteorological and synoptic characteristics.     

Pb isotopes as tracers of mining-related Pb in lichens, seaweed and mussels near a former Pb-Zn mine in West Greenland

Identification of mining-related contaminants is important in order to assess the spreading of contaminants from mining as well as for site remediation purposes. This study focuses on lead (Pb) contamination in biota near the abandoned ‘Black Angel Mine’ in West Greenland in the period 1988-2008. Stable Pb isotope ratios and total Pb concentrations were determined in lichens, seaweed and mussels as well as in marine sediments. The results show that natural background Pb (²⁰⁷Pb/²⁰⁶Pb: 0.704-0.767) and Pb originating from the mine ore (²⁰⁷Pb/²⁰⁶Pb: 0.955) have distinct isotopic fingerprints. Total Pb in lichens, seaweed, and mussels was measured at values up to 633, 19 and 1536 mg kg⁻¹ dry weight, respectively, and is shown to be a mixture of natural Pb and ore-Pb. This enables quantification of mining-related Pb and shows that application of Pb isotope data is a valuable tool for monitoring mining pollution.     

Applications of Anthropogenic Lead ArchaeoStratigraphy (ALAS Model) to Hydrocarbon Remediation

A model, which employs the use of high precision stable lead isotopic analyses, has been developed to estimate the age of hydrocarbon releases. The ALAS Model (Anthropogenic Lead ArchaeoStratigraphy) is based on calibrated, systematic increases in lead isotope ratios of gasolines caused by shifts in sources of lead ores used by the U.S. lead industry, including manufacturers of alkylleads, to more radiogenic Mississippi Valley Type (MVT) deposits. Acquisition of high quality samples (free product, gasoline-impacted soil and groundwater) of known age and subsequent analyses of the hydrocarbon component by high precision lead isotopic analyses by thermal ionization mass spectrometry (TIMS) have produced the ALAS Model calibration curve. Age uncertainties range from - 1 to 2 years for gasoline releases which occurred between 1965 and 1990, the major era of leaded gasoline usage. Analytical methods required to measure lead isotope ratios on ~5 nanograms of lead with precisions and accuracy of < - 0.1% (2 SEM ) are discussed in detail. Published lead isotopic measurements of gasoline-derived anthropogenic lead of samples throughout the United States are used to demonstrate the wide geographic range over which the ALAS Model may be applied. Two representative case studies involving an early 1970s free product release in California and the discrimination of a 1970s from modern unleaded gasoline release in Florida demonstrate the use of the model on single and multiple hydrocarbon releases, respectively, in different geographic regions of the United States. A third investigation focuses on the use of lead isotopes to correlate dissolved phase hydrocarbons with their source, in this case, unleaded (aka low lead) gasoline releases in New Jersey. Dissolved phase hydrocarbons (BTEX/MTBE) are shown to carry the lead isotopic signature of the unleaded gasoline into groundwater, allowing the specific source of the release to be identified. Investigations of lead isotopes as tracers of MTBE in groundwater are ongoing. However, both laboratory and field data indicate MTBE carries the lead isotopic signature of its unleaded gasoline source into groundwater, demonstrating the potential of the lead isotopic system as a discriminant of MTBE sources. Although developed to estimate the age of leaded gasoline releases, the ALAS Model has been successfully applied in studies requiring age dating of jet-A, diesel, kerosene, motor oil, and heating oil. These petroleum distillates are suspected of accidentally acquiring small, yet significant quantities of alkylleads during refining, allowing accurate ALAS Model ages to be determined. When lead levels in these petroleum distillates are within their normal range, typically tens to hundreds of ppb lead, it is possible to use lead isotopic ratios to correlate environmental releases of these products to their source or other releases.     

Neural Network and Multiple Regression Models for PM10 Prediction in Athens: A Comparative Assessment

Abstract

Particulate atmospheric pollution in urban areas is considered to have significant impact on human health. Therefore, the ability to make accurate predictions of particulate ambient concentrations is important to improve public awareness and air quality management. This study examines the possibility of using neural network methods as tools for daily average particulate matter with aerodynamic diameter <10 µm (PM₁₀) concentration forecasting, providing an alternative to statistical models widely used up to this day. Based on a data inventory, in a fixed central site in Athens, Greece, ranging over a two-year period, and using mainly meteorological variables as inputs, neural network models and multiple linear regression models were developed and evaluated. Comparison statistics used indicate that the neural network approach has an edge over regression models, expressed both in terms of prediction error (root mean square error values lower by 8.2–9.4%) and of episodic prediction ability (false alarm rate values lower by 7–13%). The results demonstrate that artificial neural networks (ANNs), if properly trained and formed, can provide adequate solutions to particulate pollution prognostic demands.     

Lead isotope ratios in the urban air of eastern and central Russia

In order to characterize airborne lead in eastern and central Russian cities in terms of lead isotope ratios, aerosol samples were collected at six selected cities and Moscow, and their lead concentrations and isotope ratios were studied by comparing them to the data of ore lead used in Russia. All eastern Russian cities (Vladivostok, Khabarovsk and Yakutsk) were found to have isotope ratios similar to those of ore leads in Kazakhstan, the major lead producer for Russia. Samples collected in Moscow also showed isotope ratios similar to those of eastern Russian cities. The contribution from coal combustion to airborne lead was considered to be small even in winter, in these cities. This observation suggested that the origin of lead in these Russian atmosphere regions is closely related to the lead products (e.g. leaded gasoline). The lead isotope ratios in three eastern Russian cities were very close to the value for Russian air mass reported previously in Japan, which were also in good agreement with the same observation in Sweden. However, considerably different lead isotope ratios were observed in central Russian cities, Kemerovo and Nizhnevartovsk, indicating that specific lead emissions, such as industrial activities using Precambrian-age ores or unique leaded gasoline, might contribute to the atmospheric lead.     

Applications of Anthropogenic Lead ArchaeoStratigraphy (ALAS Model) to Hydrocarbon Remediation

A model, which employs the use of high precision stable lead isotopic analyses, has been developed to estimate the age of hydrocarbon releases. The ALAS Model (Anthropogenic Lead ArchaeoStratigraphy) is based on calibrated, systematic increases in lead isotope ratios of gasolines caused by shifts in sources of lead ores used by the U.S. lead industry, including manufacturers of alkylleads, to more radiogenic Mississippi Valley Type (MVT) deposits. Acquisition of high quality samples (free product, gasoline-impacted soil and groundwater) of known age and subsequent analyses of the hydrocarbon component by high precision lead isotopic analyses by thermal ionization mass spectrometry (TIMS) have produced the ALAS Model calibration curve. Age uncertainties range from  ± 1 to 2 years for gasoline releases which occurred between 1965 and 1990, the major era of leaded gasoline usage. Analytical methods required to measure lead isotope ratios on ∼5 nanograms of lead with precisions and accuracy of < ± 0.1% (2_SEM) are discussed in detail. Published lead isotopic measurements of gasoline-derived anthropogenic lead of samples throughout the United States are used to demonstrate the wide geographic range over which the ALAS Model may be applied. Two representative case studies involving an early 1970s free product release in California and the discrimination of a 1970s from modern unleaded gasoline release in Florida demonstrate the use of the model on single and multiple hydrocarbon releases, respectively, in different geographic regions of the United States. A third investigation focuses on the use of lead isotopes to correlate dissolved phase hydrocarbons with their source, in this case, unleaded (aka low lead) gasoline releases in New Jersey. Dissolved phase hydrocarbons (BTEX/MTBE) are shown to carry the lead isotopic signature of the unleaded gasoline into groundwater, allowing the specific source of the release to be identified. Investigations of lead isotopes as tracers of MTBE in groundwater are ongoing. However, both laboratory and field data indicate MTBE carries the lead isotopic signature of its unleaded gasoline source into groundwater, demonstrating the potential of the lead isotopic system as a discriminant of MTBE sources. Although developed to estimate the age of leaded gasoline releases, the ALAS Model has been successfully applied in studies requiring age dating of jet-A, diesel, kerosene, motor oil, and heating oil. These petroleum distillates are suspected of accidentally acquiring small, yet significant quantities of alkylleads during refining, allowing accurate ALAS Model ages to be determined. When lead levels in these petroleum distillates are within their normal range, typically tens to hundreds of ppb lead, it is possible to use lead isotopic ratios to correlate environmental releases of these products to their source or other releases.     

Characterization of atmospheric particulates, particle-bound transition metals and polycyclic aromatic hydrocarbons of urban air in the centre of Athens (Greece)

The concentrations of trace metals and polycyclic aromatic hydrocarbons (PAHs) adsorbed to total suspended particulate (TSP) and finer fractions of airborne particulate matter (PM) were determined from a site in the centre of Athens (Greece), which is characterized by heavy local traffic and is densely populated, during the winter and summer periods in 2003-2004. Also, we collected and analyzed samples of diesel and gasoline exhaust particles from local vehicles (buses, taxis and private cars) and from chimney exhaust of residential central heating appliances. A seasonal effect was observed for the size distribution of aerosol mass, with a shift to larger fine fractions in winter. The most commonly detected trace metals in the TSP and PM fractions were Fe, Pb, Zn, Cu, Cr, V, Ni and Cd and their concentrations were similar to levels observed in heavily polluted urban areas from local traffic and other anthropogenic emissions. Analysis of 16 PAHs bound to PM showed that they are mostly traffic related. In general, the fine particulate PAHs concentrations were higher than coarse particles. The most common PAHs in PM(10.2) and PM(2.1) were pyrene, phenanthrene, acenapthylene and fluoranthene, which are associated with diesel and gasoline exhaust particles. The results of this study underlined the importance of local emission sources, especially vehicular traffic, central heating and other local anthropogenic emissions. Compared with other big cities, Athens has much higher levels of airborne particles, especially of the finer fractions PM(10) and PM(2.5), correlated with traffic-related air pollution.     

The analysis and levels of lead in human teeth: a review

Human teeth are a readily accessible biological tissue for which the analysis of lead has been used for the classification of people in terms of their lead exposure and absorption. However, there are three significant problem areas in the interpretation of the analytical results for lead in teeth. First, the lead is not homogeneously distributed throughout the tooth; secondly, the lead levels vary with tooth type, which relates to the age of a tooth. Lastly, there are significant variations in results from different laboratories, which, in part, reflect problems with contamination, pretreatment and analytical methods. Since teeth provide an integrated historical record of a person's lead exposure they have some attractive features as biological indicators, compared with materials such as blood. But considerable care and attention to detail is necessary to obtain reliable data.     

Levels of dioxins, furans and PCBs in human serum and milk of people living in Greece

In an attempt to evaluate the background levels of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), non-ortho, mono-ortho and indicator polychlorinated biphenyls (PCBs) in people living in an urban (Athens) and a rural (Kozani) area of Greece, blood serum and mother milk samples were analyzed. Analytical results are reported in this study. Statistically significantly differences were observed between regions, sexes and ages. Contamination levels in blood and human milk from Greece reported here are low compared to the previously reported dioxin data from other European countries and give no indication of particular health risk.     

Indoor metallic pollution related to mining activity in the Bolivian Altiplano

The environmental pollution associated with mining and metallurgical activities reaches its greatest extent in several Andean cities and villages. Many locations in this area have accumulated through centuries a large amount of mining wastes, often disregarding the magnitude of this situation. However, in these naturally mineralized regions, there is little information available stating the exact role of mining and metallurgical industries in urban pollution. In this study, we demonstrated that the various metallic elements present in indoor dust (As, Cd, Cu, Pb, Sb, Sn, Zn) had a common origin and this contamination was increased by the proximity to the mines. Lead dust concentration was found at concerning levels for public health. In addition, wrong behaviors such as carrying mining workwear home contributed to this indoor dust pollution. Consequently, the constant exposure of the population could represent a potential health hazard for vulnerable groups, especially children.     

Human health risk assessment of lead from mining activities at semi-arid locations in the context of total lead exposure

Lead from historical mining and mineral processing activities may pose potential human health risks if materials with high concentrations of bioavailable lead minerals are released to the environment. Since the Joint Expert Committee on Food Additives of Food and Agriculture Organization/World Health Organization withdrew the Provisional Tolerable Weekly Intake of lead in 2011, an alternative method was required for lead exposure assessment. This study evaluated the potential lead hazard to young children (0–7 years) from a historical mining location at a semi-arid area using the U.S. EPA Integrated Exposure Uptake Biokinetic (IEUBK) Model, with selected site-specific input data. This study assessed lead exposure via the inhalation pathway for children living in a location affected by lead mining activities and with specific reference to semi-arid conditions and made comparison with the ingestion pathway by using the physiologically based extraction test for gastro-intestinal simulation. Sensitivity analysis for major IEUBK input parameters was conducted. Three groups of input parameters were classified according to the results of predicted blood concentrations. The modelled lead absorption attributed to the inhalation route was lower than 2 % (mean?±?SE, 0.9 %?±?0.1 %) of all lead intake routes and was demonstrated as a less significant exposure pathway to children’s blood, compared with ingestion. Whilst dermal exposure was negligible, diet and ingestion of soil and dust were the dominant parameters in terms of children’s blood lead prediction. The exposure assessment identified the changing role of dietary intake when house lead loadings varied. Recommendations were also made to conduct comprehensive site-specific human health risk assessment in future studies of lead exposure under a semi-arid climate.     

Application of a Three-Layer Photochemical Box Model in an Athens Street Canyon

ABSTRACT

The aim of this paper is to show that a photochemical box model could describe the air pollution diurnal profiles within a typical street canyon in the city of Athens. As sophisticated three-dimensional dispersion models are computationally expensive and they cannot serve to simulate pollution levels in the scale of an urban street canyon, a suitably modified three-layer photochemical box model was applied. A street canyon of Athens with heavy traffic was chosen to apply the aforementioned model. The model was used to calculate pollutant concentrations during two days with meteorological conditions favoring pollutant accumulation. Road traffic emissions were calculated based on existing traffic load measurements. Meteorological data, as well as various pollutant concentrations, in order to compare with the model results, were provided by available measurements. The calculated concentrations were found to be in good agreement with measured concentration levels and show that, when traffic load and traffic composition data are available, this model can be used to predict pollution episodes. It is noteworthy that high concentrations persisted, even after additional traffic restriction measures were taken on the second day because of the high pollution levels.     

Blood Pb and δ-ALAD inhibition in cattle and sheep from a Pb-polluted mining area

The effects of Pb pollution on cattle and sheep raised in an ancient mining area were studied through the use of blood Pb (PbB) levels and δ-aminolevulinic acid dehydratase (δ-ALAD) activity. Lead levels in livestock blood from the mining area (n=110) were significantly elevated when compared to the controls (n=79). In 91.4% of cattle (n=58) and 13.5% of sheep (n=52) sampled in the mining area, PbB levels corresponded to subclinical exposure (6-35 μg/dl). Two young cattle (<2 years) from the mining area (n=5) had PbB levels indicative of clinical poisoning (>35 μg/dl). Elevated PbB was also accompanied by δ-ALAD activity inhibition in blood, which confirms that measurable effects of Pb poisoning were taking place. Observed PbB levels suggest that a potential risk to human consumers of beef from the Pb polluted areas may also exist, as has been shown previously for game meat from the same mining area.     

Impact of gold mining associated with mercury contamination in soil,biota sediments and tailings in Kenya

This work considered the environmental impact of artisanal mining gold activity in the Migori–Transmara area (Kenya). From artisanal gold mining, mercury is released to the environment, thus contributing to degradation of soil and water bodies. High mercury contents have been quantified in soil (140 μg kg^?1), sediment (430 μg kg^?1) and tailings (8,900 μg kg^?1), as expected. The results reveal that the mechanism for transporting mercury to the terrestrial ecosystem is associated with wet and dry depositions. Lichens and mosses, used as bioindicators of pollution, are related to the proximity to mining areas. The further the distance from mining areas, the lower the mercury levels. This study also provides risk maps to evaluate potential negative repercussions. We conclude that the Migori–Transmara region can be considered a strongly polluted area with high mercury contents. The technology used to extract gold throughout amalgamation processes causes a high degree of mercury pollution around this gold mining area. Thus, alternative gold extraction methods should be considered to reduce mercury levels that can be released to the environment.