Preconcentration of tin in environmental and biological samples by ion exchange using modified Amberlite XAD-2

Utilization of Amberlite XAD-2 surface modified by covalent immobilization of brilliant green through an azo spacer for adsorptive enrichment of Sn(II) from environmental and biological samples was highlighted. The resulting resin was characterized by Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis, and scanning electron microscopy. The resin retained Sn(II) ions at an optimum pH of 9.5 with a sorption capacity of 40 mg g^?1. The modified sorbent could be reused for 10 cycles without significant changes in sorption capacity. The recovery of Sn(II) was 98% when eluted with 0.1 mol L^?1 ethylenediaminetetraacetic acid. Scatchard analysis revealed that binding sites in the modified resin were homogeneous. The equilibrium adsorption data were analyzed using the Langmuir, Freundlich, Temkin, and Redlich–Peterson isotherm models. The method was applied with satisfactory results for determination of Sn(II) ions in human plasma and sea water.     

Ligand-less in situ surfactant-based solid phase extraction for preconcentration of silver from natural water samples prior to its determination by atomic absorption spectroscopy

A simple and rapid ligand-less in situ surfactant-based solid phase extraction method for preconcentration of silver from water samples is developed. In this method, a cationic surfactant containing a proper alkyl group (n-dodecyltrimethylammonium bromide) is dissolved in the aqueous sample and then a proper ion-pairing agent (ClO₄^?) is added. Due to the interaction between surfactant and ion-pairing agent, solid particles are formed and used for adsorption of silver carbonate. After centrifugation, the sediment is dissolved in 2.0 mL 1 M HNO₃ in ethanol and then aspirated directly into the flame atomic absorption spectrometer. Variables affecting the extraction efficiencies such as pH, concentrations of surfactant and CO₃^2?, ion pair concentration, and extraction time, are optimized. Under such conditions, the calibration curve is linear from 3 to 700 μg L^?1. Detection limit is 1.1 μg L^?1 with an enrichment factor of 37. The relative standard deviation for eight replicate measurements of 100 μg L^?1 is 2.1%. The method has been applied for the determination of silver in water samples.     

Solid phase extraction of Cu (II), Ni (II), Co (II), and Fe (III) ions in water samples using salicylaldehyde benzoylhydrazone on Amberlite XAD-4 and their determinations by flame atomic absorption spectrometry

A multi element preconcentration procedure for solid phase extraction on Amberlite XAD-4 as their salicylaldehyde benzoylhydrazone chelates and flame atomic absorption spectrometric determination of some trace metal ions in water samples are proposed in this work. The influences of some analytical parameters, including pH of aqueous solution, amounts of reagent, flow rates of sample and eluent solutions, and sample volume on the quantitative recoveries of copper, nickel, cobalt, and iron were investigated. The effects of concomitant ions on the retentions of the analytes were also examined. The developed method has been successfully applied to the determination of metal ions in some real samples, including, tap water, river water, spring water, and waste water.     

Determination of cadmium in water and herbal medicine by Penicillium chrysogenum immobilized on silica gel for flame atomic absorption spectroscopy

Penicillium chrysogenum was immobilized on silica to develop a simple and cost effective method for solid phase extraction of Cd(II) and determination using flame atomic absorption spectrometry (FAAS). The sorbent was characterized by Fourier transform infrared spectroscopy and packed into a column. The conditions for quantitative sorption and desorption of Cd(II) were optimized. The preconcentration factor was 100 while detection limit was 0.61 µg L^?1 with a relative standard deviation of 1.0%. The method was applied for determination of Cd in herbal medicine and tap water.     

Determination of Au(III) and Pd(II) ions by flame atomic absorption spectrometry in some environmental samples after solid phase extraction

A simple and sensitive solid phase extraction method was developed for simultaneous separation and preconcentration of gold and palladium ions with N-(4-methylphenyl)-2-{[(4-phenyl-5-pyridine-4-yl-4H-1,2,4-triazol-3-yl)thio]acetyl}hydrazine carbo thioamide complex on Amberlite XAD-1180 resin before their determination by flame atomic absorption spectrometry. Some analytical parameters such as HNO₃ concentration of the sample solution, amount of complexing agent, sample volume, eluent type and volume, effects of foreign ions and adsorption capacity of the resin were investigated for quantitative recovery of gold and palladium ions. The effects of some anions and cations were also examined. Under optimum conditions, the detection limits for gold and palladium ions were found to be 0.29 and 0.19 μg L^?1, respectively. The preconcentration factor for gold and palladium was 250. After being validated by standard addition and analysis of standard reference material, the procedure was successfully applied to the analysis of sea and stream water, anodic slime, gold ore, soil and electronic waste.     

Preconcentration of some trace metal ions on coated alumina modified by 1-((6-(-(2-hydroxynaphthalen-1-yl)methyleneamino) hexylimino) methyl) naphthalen-2-ol

A sensitive and efficient method for preconcentration of trace amounts of some metal ions such as Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Cr³⁺, and Fe³⁺ ions based on modification of sodium-dodecyl-sulphate (SDS) coated alumina with 1-(6-(-(2-hydroxynaphthalen-1-yl) methyleneamino) hexylimino) methyl) naphthalen-2-ol (HNMAHN) is reported. The method is based on the uptake of these ions following their chelation with HNMAHN and their recovery using a suitable eluent. The influence of parameters such as pH, concentration of ligand and amount of coated alumina, SDS concentration, eluent (type and concentrations), and elution volume on metal ion recoveries are investigated. The preconcentration factor is 150 (10?mL elution volume) for a 1500?mL sample volume. The method has been successfully applied for extraction and determination of these ions content in some real samples. Extraction efficiency is generally >95% with low relative standard deviations between 1.8% and 2.4 %.     

Synthesis of 2,3-dihydroxynaphthalene-functionalized Amberlite XAD-4 resin: Applications for the separation and preconcentration of trace metal ions prior to their determination by inductively coupled plasma atomic emission spectrometry

A simple, sensitive column solid-phase extraction procedure for separation and preconcentration of Cu(II), Ni(II), Co(II), and Cd(II) in spiked and natural water samples using 2,3-dihydroxynaphthalene-functionalized Amberlite XAD-4 (XAD-4-DHN) chelating resin prior to their determination by inductively coupled plasma atomic emission spectrometry was discussed. The optimum experimental parameters such as pH, volume of sample and eluent, flow-rates of uptake and stripping, and sorption capacity of the chelating resin, were evaluated. The effect of the electrolytes and the cations on the preconcentration of metal ions was also investigated. The chelating resin could be reused for more than 20 cycles of sorption–desorption without any significant change (<1.0%). Recoveries obtained from this method range from 96 to 102% with R.S.D of 2.50 (n = 4). The detection limits for Cu(II), Ni(II), Co(II), and Cd(II) were found to be 1.9, 0.9, 1.2 µg, and 1.4 µg L^?1, respectively. The proposed method was applied for the determination of Cu(II), Ni(II), Co(II), and Cd(II) in spiked, tap water, and river water samples.     

通过式固相萃取/超高效液相色谱-串联质谱法测定蔬菜中18种农药残留

建立了超高效液相色谱-串联质谱(UPLC-MS;MS)快速测定蔬菜中18种农药残留的方法.样品经乙腈提取后,经Oasis PRiME HLB固相萃取柱净化,采用ACQUITY UPLC HSS T3 C18(50 mm×2.1 mm,1.8μm)色谱柱进行分离,以0.1%甲酸水溶液和乙腈作为流动相进行梯度洗脱.采用电喷雾电离源、正离子模式下以多反应监测(MRM)进行定性和定量分析.结果表明,18种农药在0.5—50μg·L^-1范围内线性关系良好(r2>0.995),方法最低检出限为0.4—1.5μg·kg^-1,最低定量限为1.4—5.0μg·kg^-1.在韭菜、芹菜、番茄、白菜基质中,5、10、50μg·kg^-1添加水平下的加标回收率为60.2%—126.9%,相对标准偏差(RSD)为0.4%—21.6%(n=3).     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

An efficient resin for solid-phase extraction and determination by UPLCMS/MS of 44 pharmaceutical personal care products in environmental waters

• A hydrophilic resin (GCHM) was facile synthesis and characterized. • Average absolute recovery of GCHM (75.6%) performs better than Oasis^® HLB. • Detection limits of method (SPE-UPLC-MS/MS) ranged between 0.03 and 0.6 ng/L. • 22 PPCPs were determined in environmental waters ranging from 0.5 to 1590 ng/L. In this study, a hydrophilic resin named GCHM was fabricated based on poly(N-vinyl pyrrolidone-co-divinylbenzene), characterized, and applied as a solid-phase extraction (SPE) material. Up to 44 pharmaceuticals and personal care products (PPCPs) belonging to 10 classes were recovered in environmental water samples. Different variables affecting extraction, such as adsorbent amount, sample pH, and loading speed, were optimized. Under optimal conditions, the average absolute recovery of 44 PPCPs was 75.6% using GCHM, indicating a better performance than the commercial Oasis^® HLB. SPE with home-made hydrophilic polymeric sorbent followed by ultra-performance liquid chromatography and tandem mass spectrometry was validated, and the method achieved good linearity (r²>0.991, for all analytes). In addition, the method detection limits of target compounds ranged from 0.03 to 0.6 ng/L. The developed method was applied to determine PPCPs in 10 environmental water samples taken from the Yangtze River, Huaihe River, and Taihu Lake, 1 groundwater sample from Changzhou in Jiangsu Province, 1 wastewater sample from Xiamen and 2 seawater samples from the Jiulong River in Fujian Province, China. In these samples, 22 compounds were determined at levels ranging from 0.5 to 1590 ng/L.     

Electrochemical hydride generation of tin(II) and its determination by electrothermal atomic absorption spectrometry with in situ trapping in the graphite tube atomizer

An electrolytic hydride generation system for the determination of tin(II) by means of batch electrochemical hydride generation-electrothermal atomic absorption spectrometry (EcHG-ETAAS) with in situ trapping in a graphite tube atomizer is described. The effects of four permanent chemical modifiers – palladium, tungsten, iridium, and platinum – for graphite tube treatment on analyte absorbance and the effects of four cathode materials, i.e., Pb, Sn, Pb–Sn alloy, and glassy carbon, are checked. Three electrolytes, i.e., nitric acid, sulfuric acid, and hydrochloric acid, are examined as catholyte solutions. The influence of several parameters on EcHG is investigated using multivariate and univariate methods. Interferences of some concomitant ions are evaluated. The calibration curve is linear from 1 to 200?µg?L^?1, with a detection limit of 0.8?µg?L^?1 and a relative standard deviation of 6.2% (n?=?3) for 100?µg?L^?1 Sn(II). The proposed method was successfully applied in the analysis of real environmental water samples and reference materials, and good spiked recoveries over the range of 93.1–115% were obtained. The proposed technique provides a means for developing hydride generation of other elements.