Lead(II) and cadmium(II) removal from aqueous solution using processed walnut shell: kinetic and equilibrium study

The biosorption potential of processed walnut shell for Pb(II) and Cd(II) ions from aqueous solutions was explored. The effects of pH, contact time, initial ion concentration, and amount of dried adsorbent were studied in batch experiments. The maximum adsorption was achieved within the pH range 4.0–6.0. The equilibrium data were well fitted by the Langmuir isotherm model. The maximum monolayer adsorption capacities were found to be 32?g?kg^?1 and 11.6?g?kg^?1 for Pb(II) and Cd(II) ions, respectively. Kinetic data were best described by the pseudo-second-order model. The structural features of the adsorbent were characterized by Fourier transform infrared spectroscopy, which confirmed the involvement of hydroxyl (–OH), carboxyl (–COO^–), and carbonyl (C=O) groups in metal sorption. This readily available adsorbent is efficient in the uptake of Pb(II) and Cd(II) ions from an aqueous solution and could be used for the treatment of wastewater streams bearing these metal ions.     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

Removal of Eu3+, Ce3+, Sr2+, and Cs+ ions from radioactive waste solutions by modified activated carbon prepared from coconut shells

As a biomass agricultural waste material, coconut shells were used for the preparation of high-quality modified activated carbon. Chemical modification of the surface of the prepared activated carbon is done by oxidation using H₂O₂ and HNO₃, respectively. The surface area and pore volume of the coconut shells activated carbon are increased by the chemical modification, and followingly the removal of the metals is improved. The structural morphology and composition of the modified activated carbon coconut shells (MACCS) were evaluated by Fourier transform infrared (FTIR) spectra, thermogravimetric analysis–differential thermal analysis (TGA-DTA), scanning electron microscope (SEM), X-ray diffraction (XRD), surface area analysis (SAA), X-ray fluorescence (XRF), and carbon, hydrogen, nitrogen, and sulfur (CHNS) elemental analysis. The prepared MACCS has reasonably good chemical stability. The influence of solution pH, contact time, adsorbent dosage, adsorption temperature, initial metal concentrations, and interfering ions on the adsorption performance of the investigated ions onto the prepared sorbent was examined by a batch method. The selectivity sequence for sorption of Eu³⁺, Ce³⁺, Sr²⁺, and Cs⁺ ions on MACCS was found to be Eu^3+?>?Ce^3+?>?Sr^2+?>?Cs⁺. The saturation capacities of MACCS for the studied metal ions were found to be 136.84, 85.55, 69.85, and 60.00?mg?g^?1 for Eu³⁺, Ce³⁺, Sr²⁺, and Cs⁺ ions, respectively. The thermodynamic parameters, ΔH°, ΔS°, and ΔG° were also evaluated.     

Sulfonated cross-linked polyethylenimine for selective removal of mercury from aqueous solutions

Polymeric materials are among the most promising, effective, and increasingly important adsorbents for the removal of toxic metals from wastewater. This study was dedicated to the development of an insoluble, modified chelating polymer for use as an adsorbent for abstraction of Hg from aqueous solutions. Cross-linked polyethylenimine (CPEI) was sulfonated by 3-chloropropanesulfonyl chloride for selective removal of Hg. The binding affinity of the sulfonated CPEI (SCPEI) to Hg was assessed as well as its ability to be regenerated for reuse. It exhibited high removal percentage for Hg up to 87% in synthetic solutions, with high selectivity even in the presence of competing ions: “Mn, Ni, Fe, Pb, Zn, and Cr.” The removal mechanism followed was observed to be adsorption and precipitation at pH 3 and 8, respectively. High adsorption capacities were also observed for wastewater to which the polymer was applied. The Freundlich isotherm was found to be the best fit describing the adsorption process of Hg onto the SCPEI. The pseudo second-order equation was found to better explain the adsorption kinetics, implying chemisorption. The thermodynamic study of the adsorption revealed high activation energies which confirmed the chemisorption as the mechanism of adsorption. The polymer exhibited up to 72% removal efficiency after regeneration, thus showing potential for re-use.     

Synthesis and characterization of an ion exchanger based on tamarind kernel powder and its application for removal of some metal ions from industrial effluents

A resin synthesized from tamarind kernel powder possesses high selectivity for metal ions. Distribution coefficients for some metal ions has been determined by the batch method. The influence of pH on ion exchange capacity and K _d value of metal ions were studied. The resin has been characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, chemical composition and ion exchange capacity (IEC). The selectivity order is Pb²⁺?>?Cu²⁺?>?Fe²⁺?>?Zn²⁺?>?Ni²⁺. Removal of metal ions from the aqueous solution and from effluents of a steel mill has been studied.     

Selective separation and preconcentration studies of chromium(VI) with Alamine 336 supported liquid membrane

Chromium compounds have received considerable attention because these are used extensively in such industrial applications as electroplating, steelmaking, tanning of leather goods, and corrosion inhibition. The use of supported liquid membranes (SLMs) to remove metals from wastewaters has actively been pursued by the scientific and industrial community. In the present work, the selective separation and preconcentration of Cr(VI) ions has been studied by using a commercial amine as the membrane liquid on the porous polypropylene support. Permeation experiments were conducted on a laboratory scale batch reactor made up of perspex, with a memberane fixed amid the two chambers. The flux of Cr(VI) ions was found to be maximum (3.15?×?10^?5?mol?cm^?2?s^?1) around pH 1. Above and below this pH the flux decreases. Distribution studies show that an increase in the amine concentration leads to higher distribution coefficients at fixed pH values. At pH around unity, the distribution of Cr(VI) ions into the organic phase was found to be maximum, of the order of 56.3. The Cr(VI) transport through the membrane increases with rise in temperature. In order to check the long-term efficiency of the flat sheet SLM, an experiment was conducted with higher Cr(VI) concentration (5000?ppm) for 24?h, at optimised parameters. It was observed that in 24?h, about 1/5th of the feed Cr(VI) is left over while the rest is transported. However, minute organic droplets were also seen in the feed and strip compartments, after 1 day. This observation suggested the loss of membrane liquid. The feasibility of preconcentration of Cr(VI) by using the proposed SLM parameters, was also studied by using the hollow fibre (HF) system. Highest enrichment factor (E.F) value was obtained for 50?mg?L^?1 whereby all of the metal was transported to the stripping phase and the resulting Cr concentration was 688?mg?L^?1 (E.F?=?13.8). It was observed that while treating more diluted solutions, the enrichment factor decreases. The values of E.F equal to 8.9 and 11.3 were found for initial Cr concentration of 10 and 30?mg?L^?1.     

Comparative effects of five chelating agents on testicular toxicity in mice induced by acute exposure to cadmium

The aim of this study was to develop new antidotes for cadmium (Cd) since this metal is known to produce mammalian toxicity. N-p-hydroxymethylbenzyl-D-glucamine dithiocarbamate (HBGD), N-benzyl-D-glucamine dithiocarbamate (BGD), diethyldithiocarbamate (DDTC), 2,3-dimercaptopropanol (BAL), and ethylenediamine-tetraacetic acid (EDTA) were studied for their ability to inhibit the adverse effects induced by Cd on mouse testes. The parameters examined included concentrations of Cd, calcium (Ca), iron (Fe), and zinc (Zn) in testes, lipid peroxidation (LPO) levels in testes, lactate dehydrogenase (LDH) activity in serum and reproductive ability of male mice. Mice injected intraperitoneally (ip) with CdCl₂ (2.5?mgCd?kg^?1) after 30?min or 24?h, were then injected ip with chelating agents (400?µmol?kg^?1). Cd increased the concentrations of testicular Ca, Cd, Fe, Zn, and LPO levels as well as the activity of LDH in serum. HBGD and BGD effectively prevented the increase in above indices, and improved the reproductive ability weakened by exposure to Cd. The results suggested that HBGD and BGD are more effective detoxificants in the case of testicular toxicity in mice induced by acute exposure to Cd.     

In vitro toxic effects of heavy metals on fungal growth and phosphate-solubilising abilities of isolates obtained from Phragmites australis rhizosphere

In this research, we evaluated the toxic effect of metal ions on mycelial growth and phosphate-solubilising activity of soil-borne micromycetes isolated from the Phragmites australis rhizosphere using Pikovskaya-agar plates supplemented with four metal concentrations. The diameter growth rate (DGR) decreased as the metal concentration rise for all tested fungi. Trichoderma atroviride had the fastest growth rate (1.48?cm²?day^?1) and was the least susceptible to Al³⁺, Cd²⁺, Cr³⁺, Cu²⁺ and Pb²⁺ with a median effective concentration (MEC₅₀) of 12.19, 0.48, 4.51, 11.44 and 50.05?mM, respectively. Aspergillus japonicus was the most tolerant to Co²⁺, Ni²⁺ and Zn²⁺, with MEC₅₀ values of 3.36, 1.095 and 2.34?mM, respectively. Penicillium italicum was the most tolerant to Cr6⁺ (MEC₅₀?=?0.677?mM). The ability to solubilise phosphate remained, despite the decrease in the DGR, and P. italicum and Penicillium dipodomyicola had the highest Phosphate Solubilisation Indexes (PSIs) at 1.97 and 2.12, respectively. In particular, P. italicum recorded the highest PSI of all the studied isolates at 0.62?mM Cr³⁺ (PSI?=?4.74). A. japonicus and T. atroviride were the most tolerant isolates to all tested metals, which suggests that these isolates are promising candidates for further study with regard to mycoremediation and biofertilisation of metal-polluted soils.     

Determination of the levels of selected metals in seeds,flowers and fruits of medicinal plants used for tapeworm treatment in Ethiopia

The level of accumulation of selected essential and non-essential metals, namely; Ca, Cu, Fe, Zn, Mn, Cd, Pb, and Cr have been investigated in the seeds, fruits, and flowers of some medicinal plants utilized for tapeworm treatment in Ethiopia and their respective soil samples. These include seed of Cucurbita maxima (Duba), fruit of Embelia abyssinica (Ankoko), flowers of Hagenia abyssinica (Kosso), and fruits of Rosa abyssinica (Kega) and their respective soil samples. A wet digestion procedure with a mixture of conc. HNO₃ and HClO₄ for the plant samples and a mixture of conc. HNO₃, HCl, and H₂O₂ for soil samples were used to solubilize the metals. Ca (1280–12,670?mg?kg^?1) was the predominant metal followed by Fe (104–420?mg?kg^?1), and Zn (18–185?mg?kg^?1) in all the plant materials except for Hagenia abyssinica flower from Hirna in which Mn (16–42?mg?kg^?1) followed by Fe. Among the non-essential toxic metals, Pb was not detected in Cucurbita maxima of Boji, Gedo and Hirna origins and in Rosa abyssinica of Hirna site. Similarly, Cr was not detected in Rosa abyssinica fruits of Boji and Gedo sites. The sampled soils were found to be between strongly acidic to weakly basic (pH: 4.7–7.1). In the soil samples, Ca (8528–18,900?mg?kg^?1) was the most abundant metal followed by Fe (417–912?mg?kg^?1), Zn (155–588?mg?kg^?1), Mn (54–220?mg?kg^?1), Cr (21–105. mg?kg^?1), Cu (11–58?mg?kg^?1), Pb (13–32?mg?kg^?1) and Cd (2.8–4.8?mg?kg^?1). The levels of most of the metals determined in the medicinal plants and the respective soil samples are in good agreement with those reported in the literature and the standards set for the soil by various legislative authorities.     

Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces

This study examines the adsorption isotherms, kinetics and mechanisms of Pb²⁺ sorption onto waste cow bone powder (WCBP) surfaces. The concentrations of Pb²⁺ in the study range from 10 to 90 mg/L. Although the sorption data follow the Langmuir and Freundlich isotherm, a detailed examination reveals that surface sorption or complexation and co-precipitation are the most important mechanisms, along with possibly ion exchange and solid diffusion also contributing to the overall sorption process. The co-precipitation of Pb²⁺ with the calcium hydroxyapatite (Ca-HAP) is implied by significant changes in Ca²⁺ and PO₄ ^3? concentrations during the metal sorption processes. The Pb²⁺ sorption onto the WCBP surface by metal complexation with surface functional groups such as ≡ POH. The major metal surface species are likely to be ≡ POPb⁺. The sorption isotherm results indicated that Pb²⁺ sorption onto the Langmuir and Freundlich constant q _max and K _F is 9.52 and 8.18 mg g^?1, respectively. Sorption kinetics results indicated that Pb²⁺ sorption onto WCBP was pseudo-second-order rate constants K ₂ was 1.12 g mg^?1 h^?1. The main mechanism is adsorption or surface complexation (≡POPb⁺: 61.6%), co-precipitation or ion exchange [Ca_3.93 Pb_1.07 (PO₄)₃ (OH): 21.4%] and other precipitation [Pb 50 mg L^?1 and natural pH: 17%). Sorption isotherms showed that WCBP has a much higher Pb²⁺ removal rate in an aqueous solution; the greater capability of WCBP to remove aqueous Pb²⁺ indicates its potential as another promising way to remediate Pb²⁺-contaminated media.     

Removal of heavy metals from aqueous solutions using activated carbon prepared from Cicer arietinum

Removal of Cu²⁺, Cd²⁺, Pb²⁺, and Zn²⁺ from aqueous solutions by activated carbon prepared from stems and seed hulls of Cicer arietinum, an agricultural solid waste, has been studied. The influence of various parameters, such as pH, contact time, adsorbent dose, and initial concentration of metal ions on removal was evaluated. The activated carbon was characterized by FT-IR spectroscopy, X-ray diffraction, and elemental analysis. Sorption isotherms were studied using Langmuir and Freundlich isotherm models. All experimental sorption data were fitted to the sorption models using nonlinear least-squares regression. The maximum adsorption capacity values for activated carbon prepared from Cicer arietinum waste for metal ions were 18 mg g^?1 (Cu²⁺), 18 mg g^?1 (Cd²⁺), 20 mg g^?1 (Pb²⁺), and 20 mg g^?1 (Zn²⁺), respectively. The Freundlich isotherm model fit was best, followed by the pseudo-second-order kinetic model. Desorption studies were carried out with dilute hydrochloric acid for quantitative recovery of the metal ions and for regeneration of the adsorbent.     

Removal of selenite using ‘waste’ Fe(III)/Cr(III) hydroxide: Adsorption kinetics and isotherms

Removal of selenite [Se (IV)] from aqueous solution on to industrial solid ‘waste’ Fe(III)/Cr(III) hydroxide as adsorbent was investigated in the present article. Maximum adsorption was found to be at pH 4.0. Pretreated Fe(III)/Cr(III) hydroxide was found to be more efficient for the removal of selenite compared to untreated adsorbent. Langmuir and Freundlich isotherms have been studied. The Langmuir adsorption capacity (Q ₀) of the pretreated and untreated adsorbents was found to be 15.63 and 6.04?mg?g^?1, respectively. The adsorption process fit into the second-order kinetics. Thermodynamic parameters show that the adsorption process is spontaneous and endothermic in the temperature range 32 to 60°C. Coexisting anions vanadate and phosphate significantly affect the adsorption of selenite for both the pretreated and untreated adsorbents. Molybdate, thiocyanate, sulphate, nitrate and chloride do not significantly affect the removal of selenite for pretreated adsorbent.     

The accumulation levels of heavy metals (Ni,Cr, Sr, & Ag) in marine algae from southwest coast of India

In the context of use of marine algae as biological indicators of heavy metal pollution in coastal waters, six species of marine algae collected from the southwest coast of India were analysed for the levels of heavy metals (Ni, Cr, Sr, and Ag). Interspecies and interclass variations were determined on a spatial and temporal scale. The metal contents varied in the ranges, Ni: 0.20–21.06?µg?g^?1 (mean?=?10.13?µg?g^?1), Cr: non-detectable level (ND)–37.18?µg?g^?1 (mean?=?13.86?µg?g^?1), Sr: 2.19–103.90?µg?g^?1 (mean =?29.40?µg?g^?1), and Ag: ND–6.39?µg?g^?1 (mean?=?1.80?µg?g^?1). Ni and Cr contents were of similar magnitude to those reported for algae from polluted areas.     

Concentrations of Cd,Ni, Pb,and Cr in the two edible fish species Liza klunzingeri and Sillago sihama collected from Hara biosphere in Iran

The concentrations of four metals (Cd, Ni, Pb, and Cr) were determined in the muscles, gills, and livers of two edible fish species (Liza klunzingeri and Sillago sihama) caught from the Hara biosphere of Southern Iran. In both fish species, metal concentrations and bioaccumulation factors were in the sequence liver?>?gill?>?muscle. Bioaccumulation factors were found to be highest in S. sihama. The metal concentrations were descending in the order of Ni?>?Cr?>?Pb?>?Cd, except for muscle samples from S. sihama showing an inversion of Pb and Cr. There is a significant negative correlation between the concentrations of the metals in each tissue with length, weight, and age, except for muscle in L. klunzingeri. Some metal levels in the muscle exceeded the limits recommended by FAO, WHO, and FEPA.     

Immobilized Lentinus edodes residue as absorbent for the enhancement of cadmium adsorption performance

To investigate the potential use of Lentinus edodes (L. edodes) residue for Cd²⁺ adsorption, poly alcohol Na alginate (PVA) was applied to immobilize it. The parameters including contact time, pH, adsorbent dosages, and coexisting metal ions were studied. The suitable pH for immobilized L. edodes was 4?C7 wider than that for raw L. edodes (pH 6?C7). In the presence of Pb²⁺ concentration varying from 0 to 30 mg·L^?1, the Cd²⁺ adsorption ratios declined by 6.71% and 47.45% for immobilized and raw L. edodes, respectively. While, with the coexisting ion Cu²⁺ concentration varied from 0 to 30 mg·L^?1, the Cd²⁺ adsorption ratios declined by 12.97% and 50.56% for immobilized and raw L. edodes, respectively. The Cd²⁺ adsorption isotherms in single-metal and dual-metal solutions were analyzed by using Langmuir, Freundlich, and Dubinin-Radushkevich models. The Cd²⁺ adsorption capacities (q _m) in single-metal solution were 6.448 mg·L^?1 and 2.832 mg·L^?1 for immobilized and raw L. edodes, respectively. The q _m of immobilized L. edodes were 1.850 mg Cd·g^?1 in Cd²⁺ + Pb²⁺ solution and 3.961 mg Cd·g^?1 in Cd²⁺ + Cu²⁺ solution, respectively. The Cd²⁺ adsorption processes subjected to both adsorbents follow pseudo-second-order model. Mechanism study showed the functional group of L. edodes was -OH, -NH, -CO, and PVA played an important role in metal adsorbing. Mining wastewater treatment test showed that PVA-SA-immobilized L. edodes was effective in mixed pollutant treatment even for wastewater containing metal ions in very low concentration.     

Acute toxicity of benzophenone-type UV filters and paraben preservatives to freshwater planarian,Dugesia japonica

Fourteen benzophenone-type UV filters and four paraben preservatives were selected to examine their acute toxicities on Dugesia japonica. The 48-h LC₅₀ values for planarians exposed to benzophenone-type UV filters can be ranked as oxybenzone?>?mexenone?>?5-chloro-2-hydroxybenzophenone?> 2,4-dihydroxybenzophenone?>?2-hydroxybenzophenone?>?dioxybenzone?>?benzophenone?>?2,2′,4,4′-tetrahydroxybenzophenone?>?4-hydroxybenzophenone?> 3-hydroxybenzophenone?>?4,4′-dihydroxybenzophenone?>?2,2′-dihydroxy-4,4′-dimethoxybenzophenone?>?2,3,4-trihydroxybenzophenone?>?sulisobenzone with a range from 0.9 to 145?mg?L^?1 with a similar sequence for the 96?h LC₅₀ values, ranging from 0.5 to 77?mg?L^?1. The 48 and 96?LC₅₀ values for planarians exposed to paraben preservatives can be ranked as butylparaben?>?propylparaben?>?ethylparaben?>?methylparaben. Among all the tested chemicals, oxybenzone was the most toxic and sulisobenzone the least toxic chemical to planarian at each exposure period. Most benzophenone-type UV filters are toxic to aquatic animals with 48?h LC₅₀ values less than 10 mg?L^?1, except for 2,2′-dihydroxy-4,4′-dimethoxybenzophenone, 2,3,4-trihydroxybenzophenone, and sulisobenzone. Because of their common occurrence in aquatic environment, more studies on aquatic toxicities of benzophenone-type UV filters and paraben preservativs are needed to provide important information to adequately assess their ecological risk.     

Low-cost and efficient adsorbent derived from pyrolysis of Jatropha curcas seeds for the removal of Cu2+ from aqueous solutions

Biochar, is a low-cost material that can be used as an alternative adsorbent for the removal of heavy metals. In this study, a low-cost and efficient adsorbent synthesised from Jatropha curcas seeds was used for the uptake of Cu²⁺ from aqueous solutions. The as-prepared adsorbent was characterised by scanning electron microscopy and Brunauer–Emmett–Teller analysis post calcination at 500 °C, its BET surface area and total pore volume were 39.62?m²?g^?1 and 0.049?m³?g^?1, respectively. Subsequently, the effects of initial pH of the solution, contact time, and adsorbent material dosage on the adsorption of Cu²⁺ by the prepared adsorbent were investigated. The as-prepared adsorbent exhibited a high performance, with a maximum adsorption amount of 32.895?mg?g^?1 for Cu²⁺ at pH 5.0 and 25 °C, owing to the presence of ?OH, C=O, C–O, Si-O-Si, and O-Si-O on its surface. The predominant Cu²⁺ adsorption mechanism was assumed to be ion exchange. Notably, the Cu²⁺ adsorption could attain equilibrium within 90?min. In addition, the fact that the Langmuir model was a better fit than the Freundlich model for the isotherm data of Cu²⁺ adsorption by the as-prepared adsorbent suggested that the adsorption of Cu²⁺ was a monolayer adsorption process.     

Removal of chromium(VI) by ZnCl2 activated coir pith carbon

The adsorption of chromium(VI) onto ZnCl₂ activated carbon developed from coir pith was investigated to assess the possible use of this adsorbent. The influence of contact time, adsorbent dose, Cr(VI) concentration, pH and temperature were investigated. The two theoretical adsorption isotherms, namely, Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Q ₀) was found to be 120.5?mg Cr(VI) per g of the adsorbent. The adsorption followed the second-order kinetics and was found to be maximum at pH 2.0. The pH effect and the desorption studies showed that ion exchange mechanism might be involved in the adsorption process. The effects of foreign ions such as chloride, sulphate, phosphate, selenite, molybdate, nitrate and perchlorate on the removal of Cr(VI) have been investigated. The removal of Cr(VI) from synthetic ground water was also tested. The results show that ZnCl₂ activated coir pith carbon is effective for the removal of Cr(VI) from water.     

A comparative study of modified and unmodified maize tassels for removal of selected trace metals in contaminated water

Powdered maize tassels were studied and found to exhibit metal sorption properties due to the availability of functional groups. The tassels have a high amount of soluble organic substances that can dissolve in aqueous media, contributing to secondary pollution during a water treatment process. A chelating agent was chemically attached on the maize tassels with a view to increase the sorption capacity, minimize leaching, and enhance the tassels’ stability. Thermogravimetric analysis confirmed that modification improved their thermal stability to withstand temperatures above 600°C as well as reduced the “secondary pollution”. The modified sorbent was employed for the sorption of lead, copper, and cadmium ions in both the model solutions and the real samples. The contact time and pH were optimized after which Langmuir and Freundlich isotherms were applied to the data. The sorption capacities for Cu²⁺, Cd²⁺, and Pb²⁺ improved from 3.4, 0.8, and 1.7?g?kg^?1, respectively, to 6.3, 2.6, and 2.6?g?kg^?1 in the same order. The sorbent was shown to remove up to 95% of the metals in less than 10 min. This study has a potential application for the remediation of polluted waters.