Thermogravimetric coupled with Fourier transform infrared analysis study on thermal treatment of monopotassium phosphate residue

In China, safe disposal of hazardous waste is more and more a necessity, urged by rapid economic development. The pyrolysis and combustion characteristics of a residue from producing monopotassium phosphate (monopotassium phosphate residue), considered as a hazardous waste, were studied using a thermogravimetric, coupled with Fourier transform infrared analyzer (TG-FTIR). Both pyrolysis and combustion runs can be subdivided into three stages: drying, thermal decomposition, and final devolatilization. The average weight loss rate during fast thermal decomposition stage in pyrolysis is higher than combustion. Acetic acid, methane, pentane, (acetyl) cyclopropane, 2,4,6-trichlorophenol, CO, and CO₂ were distinguished in the pyrolysis process, while CO₂ was the dominant combustion product.     

Hazardous waste management in educational and research centers: a case study

The hazardous waste management (HWM) practice at Tehran University of Medical Sciences Central Campus, Iran, was investigated in this study. Four schools were selected and the required information such as type and amount of wastes, temporary storage methods, waste discharge frequency, and final waste disposal methods using sampling, questionnaires, interviews with laboratory staff, and reference to available documents were gathered. The quantity of hazardous waste generation per year excluding the uncontrolled wastewater was found to be 2.072 tons per year. The obtained results show that wastes having features of being infectious, toxic, ignitable, carcinogenic, corrosive, and reactive were present at 32%, 28%, 16%, 14%, 8%, and 2%, respectively. In the central campus, hazardous solid wastes managed with household solid wastes and hazardous liquid waste were discharged into the sinks without any kind of control; improper HWM practices are evident from the point of waste production to final disposal.     

The microbiological control of mine waste pollution

The removal of heavy metals and neutralisation of acidity in mine waste waters by algae and bacteria are reviewed. Algal growths in artificial meander systems have been shown to remove significant quantities of heavy metals and fine particulates from mine waste waters. Bacterial systems for the oxidation of ferrous iron and the reduction of sulphate leading to neutralisation of acidity are described. The use of bacterial extracellular polymers in the removal of heavy metals from solution is discussed with reference to its application to acid mine waters. It is concluded that a combination of bacterial and algal systems with process optimisation, including nutrient amendment, may provide suitable treatment for mine waste waters. Metal-resistant bacteria may also be important in reclamation, where it is possible that they can confer some degree of tolerance on the plants used to revegetate metal-contaminated tailings dumps.     

微波碱解处理剩余污泥的厌氧消化性能

为了研究微波碱解预处理（microwave/NaOH pretreatment,MNP）剩余污泥在高温和中温条件下厌氧消化的性能,采用半连续完全混合式反应器分别研究了MNP处理后的剩余污泥在高温厌氧消化工艺（thermophilic anaerobic di-gestion process,TADP）和中温厌氧消化工艺...     

Directions for hazardous waste storage and final disposal of treated hazardous waste (THW) in Austria

Austria produces about 700,000 tons of hazardous waste a year. Approximately 8% are sent to the incinerating facility EBS near Vienna. Approximately 60% THW (treated hazardous wastes) are finally disposed of. An unknown amount is sent to foreign countries for storage and landfilling.

By order of the Ministry of Agriculture and the Ministry of Public Health our institute elaborates guidelines for designing and operating final disposal hazardous waste facilities.

This paper deals with the fundamental aspects and the present state of these guidelines.     

Effect of technology convergence for tablet PC on potential environmental impacts from heavy metals

The technology convergence integrating multiple devices into a single one is now a distinct trend in electronic industry. This trend can lead to a decrease in the use of rare and toxic heavy metals due to resource sharing, or an increase due to the application of new and auxiliary technology. This study investigates the effect of technology convergence for tablet PC on hazardous waste, resource depletion, and toxicity potentials from heavy metals in electronic devices, considering how many single devices (i.e., netbook computer, electronic dictionary, mp3 player, digital camera, cell phone, and vehicle GPS system) can be displaced by a tablet PC depending on users. The hazardous waste potential from heavy metals is examined with existing U.S. federal and California state regulations, and the resource depletion and toxicity potentials from heavy metals are evaluated based on life cycle impact assessments. The potentials of a specific tablet PC are compared to the total of those of displaced single products. Overall, the tablet PC has lower hazardous waste, resource depletion, and toxicity potentials from heavy metals. However, in case the tablet PC displaces only two or three single devices, it requires more gold, molybdenum, and vanadium. Therefore, technology convergence should take into account materials consumption and user behavior to develop more sustainable products.     

Control Criteria and Activities in Dumping Management in Italy

In Italy, two different types of wastes can be dumped in the seas: industrial wastes and dredged material. There are no cases of sludges from urban treatment plants being discharged into the sea.

The sea dumping of harbour dredging sludges is a long standing practice, while the disposal of industrial wastes dates back to 1965.

Two specific laws regulate these two activities, although they do not establish quality standards for the receiving sea environment. Careful evaluation must be made, case by case, of possible effects of discharge with regard to physico-chemical characteristics of materials, to general oceanological characteristics of the dumpsite and to the uses to which such a dumpsite is designated.

The analysis of different cases of industrial waste dumping, carried out at the pre-operational level and during discharge, revealed some potential for negative long-term effects on the sea environment. This, as well as the increasing public sensitivity to environmental problems, led the management agencies in Italy to take several measures aimed to stop all forms of sea dumping of industrial wastes and to revise the general criteria in issuing permits for the discharge of dredged material.     

Overview of principles and implementations to deal with spatial issues in monitoring environmental effects of genetically modified organisms

Background

Sorting and disposal of waste are the last steps in the “lifetime” of a product. If products are contaminated with chemicals assessed to be hazardous for man or environment, waste management has the role of a vacuum cleaner in substance chain management working in two different ways: The hazardous compounds have to be properly separated from potential secondary resources in sorting processes. If this is not possible, those products have to be disposed safely. Starting from the experiences collected with some chemicals banned, the tools used for phasing out these chemicals from the technosphere are studied with respect to their influence on the contamination of the environment.

Results

Even if a dangerous substance has been banned, it is further used in a number of products. In the cases presented here, the substances were banned for further use. In the case of CFCs, the substitutes used have partially also been substituted because of adverse effects. Besides the prohibition of use of hazardous substances, numerous other regulations were issued to reduce unsafe handling and minimize emissions into the environment. It turned out that waste management cannot correct mistakes which already happened “upstream” in the product chain. The control of point sources works quite successfully, whereas today the overwhelming emissions stem from diffuse sources, partially caused by unsafe waste management procedures.

Conclusions

Though there are no complete balances for both groups of compounds serving as examples, some conclusions can be drawn based on the experiences collected. Hazardous compounds may be separated successfully from used products or waste,

• If they are mostly used in industry and not in households,
• if they can be identified as part of certain products,
• if their concentration in these products is rather high,
• if technical problems come up when they contaminate secondary raw materials,
• if there is international support for proper waste management.

     

Valorization of agro-industrial fruit peel waste to fluorescent nanocarbon sensor: Ultrasensitive detection of potentially hazardous tropane alkaloid

• Transformation of agro-industrial waste to value-added material via green chemistry. • Orange peel is valorized into fluorescent nanodiamond-like carbon (fNDC) sensor. • fNDC detects potentially hazardous drug atropine sulfate (AS). • fNDC recognizes AS in biological fluids and pharmaceuticals. • fNDC assures applications in clinical and forensic toxicology. Millions of tonnes of agro-industrial waste are generated each year globally, with the vast majority of it going untreated, underutilized, and disposed of by burning or landfilling, causing severe environmental distress and economic downturn. A practical solution to this global issue is to use green chemistry to convert this waste into value-added products. Accordingly, in the present study, agro-industrial orange peel waste was valorized into fluorescent nanodiamond-like carbon sensor via a green route involving hydrothermal treatment of microwave carbonized orange peel waste. The developed sensor, used for the fluorescence detection of potentially hazardous drug atropine sulfate, exhibits unique dual linearity over concentration ranges of 300 nM to 1 M and from 1 M to 10 M, as well as ultra-low sensitivity of 34.42 nM and 356.46 nM, respectively. Additionally, the sensor demonstrates excellent reproducibility, high stability, and satisfactory recovery when used to identify and quantify atropine sulfate in biological samples and commercially available pharmaceuticals, indicating promising multidisciplinary applications.     

Twenty-six tons of lead oxide used per year in wooden boat building and repairing in southern Thailand

In southern Thailand, the wooden boat building and repair industry uses powdered lead oxide (Pb₃O_4, or red lead) in the caulking process. This had been shown to be a significant source of contamination in the workplace and the communities. This cross-sectional study was conducted to estimate the amount of lead oxide used in the region and to document the management of hazardous waste product in this industry. All boatyards in southern Thailand registered to the Ministry of Industry were visited with walk-through observation. After consent, questionnaire-based interviews were conducted among workers and boatyard owners who rented out the space for building and repairing the boats. Of the 63 active boatyards identified, approximately 26 tons of lead oxide was used to repair approximately 8,000 boats each year. Due to the casual employment system in this industry, no facility for the protection of workers and the environment from lead contamination exists. The findings indicate the need for further studies on the extent of contamination in the broader area. Intervention programmes are also urgently needed to reduce the release of this hazardous waste into the community.     

三种工业废水颗粒污泥的化学及微生物学组成

对ＵＡＳＢ反应器中处理酒精废醪、木材纤维板热压废水及石灰法造纸黑液颗粒污泥的化学及微生物组成进行了比较研究，结果表明：无机元素在颗粒污泥中的沉积与废水组成及运行条件密切相关；接种污泥中加入少量的颗粒污泥可作为新生颗粒污泥的生长核心；胞外多聚物有利于颗粒污泥的形成与稳定，其产量与颗粒污泥的生物量有关，其分布有一定的区域性；颗粒污泥的微生物组成与废水水质、运行温度及颗粒污泥所处的生理阶段等因素密切相关；丝状细菌，特别是索氏甲烷丝菌类似菌在颗粒污泥中起着重要作用；污泥颗粒化过程中各类生理菌群的增殖次序与其在厌氧消化过程中的功能次序一致。当发酵细菌、产氢产乙酸菌、同型产乙酸菌和产甲烷菌在每ｍＬ颗粒污泥中分别达到１０７－１０、１０５－７、１０６－８和１０５－６个时，可构成一个较稳定的厌氧微生态系统。     

Trace metal content in inhalable particulate matter (PM<Subscript>2.5–10</Subscript> and PM<Subscript>2.5</Subscript>) collected from historical mine waste deposits using a laboratory-based approach

Mine wastes and tailings are considered hazardous to human health because of their potential to generate large quantities of highly toxic emissions of particulate matter (PM). Human exposure to As and other trace metals in PM may occur via inhalation of airborne particulates or through ingestion of contaminated dust. This study describes a laboratory-based method for extracting PM_2.5–10 (coarse) and PM_2.5 (fine) particles from As-rich mine waste samples collected from an historical gold mining region in regional, Victoria, Australia. We also report on the trace metal and metalloid content of the coarse and fine fraction, with an emphasis on As as an element of potential concern. Laser diffraction analysis showed that the proportions of coarse and fine particles in the bulk samples ranged between 3.4–26.6 and 0.6–7.6 %, respectively. Arsenic concentrations were greater in the fine fraction (1680–26,100 mg kg^?1) compared with the coarse fraction (1210–22,000 mg kg^?1), and Co, Fe, Mn, Ni, Sb and Zn were found to be present in the fine fraction at levels around twice those occurring in the coarse. These results are of particular concern given that fine particles can accumulate in the human respiratory system. Our study demonstrates that mine wastes may be an important source of metal-enriched PM for mining communities.     

A 25-year record of polycyclic aromatic hydrocarbons in soils amended with sewage sludges

We studied polycyclic aromatic hydrocarbons (PAHs) in crop soils amended with 1000 tonnes dry weight of sewage sludges per 10,000 m² from 1974 to 1992, then after sludges addition from 1993 to 1999. The absence of variations of total PAHs levels of control soils, averaging at 123 μg/Kg, shows the absence of horizontal contamination. During sludges addition, the total PAHs levels in amended soils increased from 232 to 402 μg/Kg. Seven years after sludges addition, it decreased to 275 μg/Kg, which is still more than twice –the levels of control soils. This finding shows that sludges PAHs are preserved in crop soils for long periods of time, on a human scale.     

Methods to alleviate the inhibition of sludge anaerobic digestion by emerging contaminants: a review

The rising occurrence of emerging contaminants in sludges both inhibits the anaerobic digestion of sludges and induces health issues when sludges are recycled in agriculture, calling for methods to remove contaminants. Here we review emerging pollutants in wastewater treatment plants, before and after anaerobic digestion. We present their inhibitory effects and remediation methods to alleviate inhibition. Pharmaceuticals have been detected in about 50% of the sludge samples. Sewage sludge contaminants include 19% of diuretics, 16–21% of lipid-modifying agents, hydrochlorothiazide, diclofenac, furosemide, clarithromycin, atorvastatin, and carbamazepine. Levels of antibiotics, azithromycin, ciprofloxacin, and estrone range from 500 to 600 ng/g in sludges from wastewater treatment plants. Remediation methods comprise electrooxidation, ultrasonication, thermal hydrolysis, ozonation, and bioaugmentation. Fermenting the sludges with acidogenic bacteria reduces the level of emerging pollutants in the supernatant. Nonetheless, liquid digestates still contains emerging pollutants such as sunscreen octocrylene at 147 ug/L and acetaminophen at 58.6 ug/L. As a result, pretreatment of sludge containing emerging pollutants is required.

     

抗生素菌渣处理技术研究进展

抗生素菌渣是制药企业在生产抗生素类药物时,由微生物发酵产生的固体废弃物.作为国家规定的危险废物,其产量大、含水率高、含氮、硫量高、残留抗生素的特点,使其具有巨大的环境危害性.抗生素菌渣的科学、无害处理是医药固废领域的热点难题.本文系统阐述了抗生素菌渣的类型、性质和危害,详细综述了目前主流的各类热化学处理技术和非热化学处...     

Physico-chemical characteristics of fine fraction materials from an old crystal glass dumpsite in Sweden

Physico-chemical characteristics of waste, particularly fine fraction (FF), from an old crystal glass waste dump in Sweden were studied to assess recycling or disposal alternatives. Hand-sorting of the waste indicated glass content of 44.1% while sieving established the FF as a more soil-like mix of glass and other materials constituting 33.3% of all excavated waste. The FF was around neutral pH with 24.4% moisture content, low values of Total Dissolved Solids, Dissolved Organic Carbon and fluorides, but hazardous concentrations of As, Cd, Pb and Zn according to the Swedish Environmental Protection Agency guidelines. While the FF leached metals in low concentrations at neutral pH, it leached considerably during digestion with nitric acid, implying leaching risks at low pH. Thus, the waste requires safe storage in hazardous waste class ‘bank account’ storage cells to avoid environmental contamination as metal recovery and other recycling strategies for the glass waste are being developed. The study could fill the information gap regarding preservation of potential resources in the on-going, fast-paced excavation and re-landfilling of heavy metal contaminated materials in the region.     

扩散模式在制定天津市有毒有害气体排放标准中的应用

本文介绍了天津市有毒有害气体排放标准的研究制定，并以一氧化碳为例，介绍了高斯扩散制定标准时应用。通过理论计算与现场实例，找出了理论值与实测值之间的关系，验证了所研究制定的天津市有毒有害气体排放标准的可靠性和适用性。     

Dioxin-/Furan-“Verbrennungsprofile” in Abgasen aus Hochtemperaturprozessen

Different mechanisms downstream from high temperature processes lead to the formation of polychlorinated dibenzo(p) dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). Independent from any concentrations, these mechanisms cause comparable PCDD/F patterns, the percentage proportion of single congeners or homologous groups related to the total of 17 2,3,7,8-Cl-substituted congeners or with respect to the sum of the homologous groups tetra to octa CDD/F. The characteristics of these so-called “combustion profiles” can help to interpret corresponding data from burning and melting facilities, such as municipal waste incinerators, coal power plants, sintering plants, metal finishing facilities, cement kilns, crematoria, hazardous waste incinerators and landfill gas burners     

Hospital waste generation and management in some provinces of Iran

The purpose of this investigation was to determine the rate of generation of different kinds of hospital waste and its management in 11 provinces of Iran in 2012. Waste samples were separated into two categories (domestic type and infectious waste) and weighed daily for 4 weeks, distributed over four seasons to determine quantities and composition. Data on waste management were collected through a questionnaire and interviews of hospital personnel. The total generation of hospital waste ranged from 2.3 to 4.6 kg bed-day^?1 for Razavi Khorasan and Sistan &; Baluchistan provinces. Generation of infectious waste varied from 1.0 to 1.7 kg bed-day^?1 for Sistan &; Baluchistan and Markazi provinces. The lowest and highest percentages of infectious waste generation were found in Golistan (3.8%) and Fars (15.3%). It was also revealed that management of sharps, infectious, and other hazardous wastes was not properly done. A segregation program must be implemented and each fraction of hospital waste must be collected and disposed of separately.     

Recycling sewage sludge into ceramic materials: A review

Environmental Chemistry Letters - Huge amounts of unwanted sewage sludge are generated in the process of wastewater treatment, calling for methods to recycle sewage sludges into value-added...