Hazardous waste, impact on health and environment for development of better waste management strategies in future in India

Industry has become an essential part of modern society, and waste production is an inevitable outcome of the developmental activities. A material becomes waste when it is discarded without expecting to be compensated for its inherent value. These wastes may pose a potential hazard to the human health or the environment (soil, air, water) when improperly treated, stored, transported or disposed off or managed. Currently in India even though hazardous wastes, emanations and effluents are regulated, solid wastes often are disposed off indiscriminately posing health and environmental risk. In view of this, management of hazardous wastes including their disposal in environment friendly and economically viable way is very important and therefore suggestions are made for developing better strategies. Out of the various categories of the wastes, solid waste contributes a major share towards environmental degradation. The present paper outlines the nature of the wastes, waste generating industries, waste characterization, health and environmental implications of wastes management practices, steps towards planning, design and development of models for effective hazardous waste management, treatment, approaches and regulations for disposal of hazardous waste. Appraisal of the whole situation with reference to Indian scenario is attempted so that a better cost-effective strategies for waste management be evolved in future.     

Chemical contaminants in swimming pools: Occurrence,implications and control

A range of trace chemical contaminants have been reported to occur in swimming pools. Current disinfection practices and monitoring of swimming pool water quality are aimed at preventing the spread of microbial infections and diseases. However, disinfection by-products (DBPs) are formed when the disinfectants used react with organic and inorganic matter in the pool. Additional chemicals may be present in swimming pools originating from anthropogenic sources (bodily excretions, lotions, cosmetics, etc.) or from the source water used where trace chemicals may already be present. DBPs have been the most widely investigated trace chemical contaminants, including trihalomethanes (THMs), haloacetic acids (HAAs), halobenzoquinones (HBQs), haloacetonitriles (HANs), halonitromethanes (HNMs), N-nitrosamines, nitrite, nitrates and chloramines. The presence and concentrations of these chemical contaminants are dependent upon several factors including the types of pools, types of disinfectants used, disinfectant dosages, bather loads, temperature and pH of swimming pool waters. Chemical constituents of personal care products (PCPs) such as parabens and ultraviolet (UV) filters from sunscreens have also been reported. By-products from reactions of these chemicals with disinfectants and UV irradiation have been reported and some may be more toxic than their parent compounds. There is evidence to suggest that exposure to some of these chemicals may lead to health risks. This paper provides a detailed review of various chemical contaminants reported in swimming pools. The concentrations of chemicals present in swimming pools may also provide an alternative indicator to swimming pool water quality, providing insights to contamination sources. Alternative treatment methods such as activated carbon filtration and advanced oxidation processes may be beneficial in improving swimming pool water quality.     

Routine Reporting of Environmental Risk: The First Traces of Micropollutants in the German Press

ABSTRACT

This article analyzes the emergence of a new environmental issue in the German press. Since the 1990s, scientists have detected traces of pharmaceuticals, hormones and chemicals in all segments of the water cycle. These micropollutants have negative effects on aquatic life and might affect human health. Their sources are manifold and include private households. Yet although micropollutants of are direct concern to media audiences, they are a challenging topic for news reporting. Although this issue is systemic and fraught with uncertainty, it does not easily translate into news stories. Our content analysis of 444 articles (1995–2015) reveals that the societal risk was rarely presented as a stand-alone topic. Instead, the issue was mostly covered as part of local routine reporting and framed as a challenge for experts to solve. Over time, the reporting became more managerial, while media framings of micropollutants gained more substance and scope. We contend that local routine reporting should receive more attention as a public forum for addressing emerging environmental concerns.     

Viruses in wastewater sludges and in effluents used for irrigation

Disposal of sewage wastes is a problem of increasing magnitude in the United States. New control measures enacted by Congress require consideration of land disposal of sludges and effluents. The volume of wastes involved and the possibility of contaminating ground water supplies and vegetation has great public health significance. The effectiveness of the sewage treatment process to remove chemical and biological contaminants and the operational efficiency of many sewage treatment plants are factors that must be given careful consideration before final selection of disposal methodology. The quality of our future water and food supplies will be affected either beneficially or adversely by current management decisions.     

New regulations to minimize water impairment from animals rely on management practices

Water pollution from concentrated animal feeding operations (CAFOs) led to revised federal regulations in the United States. The regulations provide for the greater management of potential sources of agricultural contamination and impose additional financial costs on producers. Along with a duty to secure a permit, significant changes address coverage of pollutants, separation of production and land application areas, effluent limitation guidelines, and differentiating agricultural storm water discharges from other discharges. The revised provisions require more producers to secure National Pollutant Discharge Elimination System permits and mandate that large CAFOs develop technology-based effluent discharge limitations involving best management practices. Medium- and small-sized CAFOs need to adopt technology-based effluent discharge requirements employing best professional judgment. For farms raising animals that are not CAFOs, voluntary management practices may be employed to intercept pollutants before they enter waterbodies. Additional educational efforts promoting the implementation of further management practices that address the agricultural impairment of water resources may be needed.     

Environmental and economic viability of Alkali Activated Material (AAM) comprising slag,fly ash and spent coffee ground

ABSTRACT

This paper presents a concept of reusing spent coffee ground (CG) as a construction material. Through creating a CG-filled Alkali Activated Material (AAM) with industrial wastes such as fly ash (FA) and slag (S), a strong recycled material was synthesised and found suitable to be used as a road subgrade fill material. Potential groundwater contamination tests were done in accordance to the Australian Standard Leaching Procedure (ASLP). The environmental analysis done on this green material shows that albeit being composed of various industrial wastes and chemicals, CG-filled AAMs in the ground will not cause adverse environmental impacts to surrounding soils and groundwater. Heavy metals and cyanide leached from the AAMs were well below hazardous thresholds. Comparing the carbon footprint of CG, it is found that recycling CG into a construction material would reduce the nett global carbon emission by reducing dependency on quarried material. Cost analyses done on CG-filled AAMs show that these AAMs are expensive to produce relative to traditional construction materials. However, as recycling technology is progressively advancing, in the future the economic value of CG-filled AAM may increase to match those of contemporary construction materials.     

Legislation on protection of drinking water sources and local management practices in the Pearl River Delta region of China

The protection of drinking water sources is vital to urban development and public health. In this study, the current situation of the mandatory protection area for drinking water source in the Pearl River Delta region was investigated using a method combining Google Earth with the field survey. The gaps between management practices and legislation requirements were analyzed. Finally, several countermeasures for water resource protection were proposed as follows: to promote delineation in a more scientific way, to safeguard the sanctity of the law, to make better plan on water saving, and to encourage public participation in supervision and management.     

Discharge of swine wastes risks water quality and food safety: Antibiotics and antibiotic resistance genes from swine sources to the receiving environments

Swine feedlots are widely considered as a potential hotspot for promoting the dissemination of antibiotic resistance genes (ARGs) in the environment. ARGs could enter the environment via discharge of animal wastes, thus resulting in contamination of soil, water, and food. We investigated the dissemination and diversification of 22 ARGs conferring resistance to sulfonamides, tetracyclines, chloramphenicols, and macrolides as well as the occurrence of 18 corresponding antibiotics from three swine feedlots to the receiving water, soil environments and vegetables. Most ARGs and antibiotics survived the on-farm waste treatment processes in the three swine farms. Elevated diversity of ARGs was observed in the receiving environments including river water and vegetable field soils when compared with respective controls. The variation of ARGs along the vertical soil profiles of vegetable fields indicated enrichment and migration of ARGs. Detection of various ARGs and antibiotic residues in vegetables fertilized by swine wastes could be of great concern to the general public. This research demonstrated the contribution of swine wastes to the occurrence and development of antibiotic resistance determinants in the receiving environments and potential risks to food safety and human health.     

Causation in risk assessment and management: models, inference, biases, and a microbial risk-benefit case study

Causal inference of exposure-response relations from data is a challenging aspect of risk assessment with important implications for public and private risk management. Such inference, which is fundamentally empirical and based on exposure (or dose)-response models, seldom arises from a single set of data; rather, it requires integrating heterogeneous information from diverse sources and disciplines including epidemiology, toxicology, and cell and molecular biology. The causal aspects we discuss focus on these three aspects: drawing sound inferences about causal relations from one or more observational studies; addressing and resolving biases that can affect a single multivariate empirical exposure-response study; and applying the results from these considerations to the microbiological risk management of human health risks and benefits of a ban on antibiotic use in animals, in the context of banning enrofloxacin or macrolides, antibiotics used against bacterial illnesses in poultry, and the effects of such bans on changing the risk of human food-borne campylobacteriosis infections. The purposes of this paper are to describe novel causal methods for assessing empirical causation and inference; exemplify how to deal with biases that routinely arise in multivariate exposure- or dose-response modeling; and provide a simplified discussion of a case study of causal inference using microbial risk analysis as an example. The case study supports the conclusion that the human health benefits from a ban are unlikely to be greater than the excess human health risks that it could create, even when accounting for uncertainty. We conclude that quantitative causal analysis of risks is a preferable to qualitative assessments because it does not involve unjustified loss of information and is sound under the inferential use of risk results by management.     

Environmental sustainability practices in South Asian university campuses: an exploratory study on Bangladeshi universities

Environmental sustainability practices in universities can play an important role in helping society form a sustainable future. In this study, the roles that Bangladeshi universities play in terms of sustainability practices on their campuses are scrutinized, as well as the challenges these universities face. The existing research on campus sustainability practices in Asia is reviewed, and a new exploratory study is put forth on environmental sustainability practices in the higher education institutions of a developing country—Bangladesh. The Campus Sustainability Assessment Framework used in Canadian universities was taken as basis for determining potential environmental management indicators. Results show that environmental management practices (i.e., environmental education, research, governance and operations) are present only to a very limited extent in higher education institutions in Bangladesh.     

Environmental management of pesticidal POPs in China: past, present and future

China, the largest developing country in the world, has been undergoing rapid economic growth in the past two decades. Synchronously, large quantities of persistent organic chlorinated pesticides have been used in agriculture and non-agriculture areas. Accompanying with incomplete management framework, the improper use and disposal of pesticides have caused serious pollution problems. In this study, we discussed: (1) ten persistent organochlorine pesticides in terms of historical production, consumption and number of manufacturers, import and export; (2) the current management framework of pesticidal persistent organic pollutants (POPs) with respect to legal system and government administrative system; (3) the existing problems in the management of pesticidal POPs; and proposed recommendations for countermeasures. Based on the available information, it can be concluded that records on the historical production and consumption quantities of pesticidal POPs are incomplete which makes a difficulty in the management. Although China has come a long way in developing a modern legal system, the current system is still considered weak and inefficient; and many challenges are ahead. The government administrative system has also been reformed and improved, but over-lapping jurisdictions still exist and are ineffective in managing pesticidal POPs program. To address these existing problems in pesticidal POPs management, it was suggested that more investigations should be conducted to collect information on pollution sources of pesticidal POPs, to evaluate their environmental risks, to identify new alternative chemicals and to complete management framework of pesticidal POPs in China. Furthermore, the public should be encouraged to participate in managing hazardous pesticidal POPs in China, and international cooperation and communication should be established and strengthened imperatively as well.     

Trace metal bioaccumulation: models, metabolic availability and toxicity

Aquatic invertebrates take up and accumulate trace metals whether essential or non-essential, all of which have the potential to cause toxic effects. Subsequent tissue and body concentrations of accumulated trace metals show enormous variability across metals and invertebrate taxa. Accumulated metal concentrations are interpreted in terms of different trace metal accumulation patterns, dividing accumulated metals into two components - metabolically available metal and stored detoxified metal. Examples of different accumulation patterns are described from crustaceans but have a general applicability to all aquatic invertebrates. Toxicity does not depend on total accumulated metal concentration but is related to a threshold concentration of internal metabolically available metal. Toxicity ensues when the rate of metal uptake from all sources exceeds the combined rates of detoxification and excretion (if present) of the metal concerned. The biodynamic model of trace metal bioaccumulation allows the prediction and explanation of widely differing accumulated trace metal concentrations in organisms, combining geochemical analyses of environmental metal concentrations with the measurement of key physiological parameters for a species from the site under consideration. The combination of the biodynamic model as a unified explanation of metal bioaccumulation with an understanding of the relationship between accumulation and toxicity sets the stage for a realistic understanding of the significance of trace metal concentrations in aquatic invertebrates.     

Recent developments in the application of risk analysis to waste technologies

The European waste sector is undergoing a period of unprecedented change driven by business consolidation, new legislation and heightened public and government scrutiny. One feature is the transition of the sector towards a process industry with increased pre-treatment of wastes prior to the disposal of residues and the co-location of technologies at single sites, often also for resource recovery and residuals management. Waste technologies such as in-vessel composting, the thermal treatment of clinical waste, the stabilisation of hazardous wastes, biomass gasification, sludge combustion and the use of wastes as fuel, present operators and regulators with new challenges as to their safe and environmentally responsible operation. A second feature of recent change is an increased regulatory emphasis on public and ecosystem health and the need for assessments of risk to and from waste installations. Public confidence in waste management, secured in part through enforcement of the planning and permitting regimes and sound operational performance, is central to establishing the infrastructure of new waste technologies. Well-informed risk management plays a critical role. We discuss recent developments in risk analysis within the sector and the future needs of risk analysis that are required to respond to the new waste and resource management agenda.     

Radiochemical analyses for environmental radiological studies at nuclear power stations

The analytical procedures used in a program of radiological monitoring studies at nuclear power stations are discussed. Samples of in-plant and effluent liquids, gases, and airborne particles were analyzed by radiochemical methods or by gamma-ray spectrometry. These procedures were modified for environmental media, including air, airborne particles, vegetation and food, milk, animal tissue, water, soil and sediment, generally by analyzing larger samples, enhancing the purification procedures, and increasing the detection sensitivity. Emphasis was placed on analyzing special samples for effluent radionuclides not routinely monitored, such as gaseous H-3, C-14, and Kr-85, and on measuring radionuclides at very low concentrations in media of possible dosimetric significance, such as radioiodine in milk. Measurements at these low levels permitted comparisons of source terms with environmental radioactivity in terms of calculational models.     

An approach to comparative assessments of potential health risks from exposure to radionuclides and hazardous chemicals

The need to compare potential health risks to the public associated with different activities that can result in releases of hazardous substances to the environment is becoming increasingly important in decision-making. In making such comparisons, it is desirable to use equivalent indicators of potential health risks for radionuclides, chemical carcinogens, and noncarcinogenic hazardous chemicals. Current approaches to risk assessment that were developed for purposes of protecting human health do not provide equivalent indicators of potential risks from exposure to radionuclides and hazardous chemicals. Comparisons of environmental concentrations or calculated exposures or risks with standards for protection of public health also do not provide equivalent indicators of potential risks. We propose a simple approach to comparative risk assessments in which calculated exposures to any hazardous substances are expressed relative to no-observed-effect levels (NOELs) or, preferably, lower confidence limits of benchmark doses (BMDLs) in humans. This approach provides an equivalent, science-based indicator of the relative risks posed by different exposures to any hazardous substances.     

Uncertainties in human health risk assessment of environmental contaminants: A review and perspective

Addressing uncertainties in human health risk assessment is a critical issue when evaluating the effects of contaminants on public health. A range of uncertainties exist through the source-to-outcome continuum, including exposure assessment, hazard and risk characterisation. While various strategies have been applied to characterising uncertainty, classical approaches largely rely on how to maximise the available resources. Expert judgement, defaults and tools for characterising quantitative uncertainty attempt to fill the gap between data and regulation requirements. The experiences of researching 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) illustrated uncertainty sources and how to maximise available information to determine uncertainties, and thereby provide an ‘adequate’ protection to contaminant exposure. As regulatory requirements and recurring issues increase, the assessment of complex scenarios involving a large number of chemicals requires more sophisticated tools. Recent advances in exposure and toxicology science provide a large data set for environmental contaminants and public health. In particular, biomonitoring information, in vitro data streams and computational toxicology are the crucial factors in the NexGen risk assessment, as well as uncertainties minimisation. Although in this review we cannot yet predict how the exposure science and modern toxicology will develop in the long-term, current techniques from emerging science can be integrated to improve decision-making.     

Radon releases from Australian uranium mining and milling projects: assessing the UNSCEAR approach

The release of radon gas and progeny from the mining and milling of uranium-bearing ores has long been recognised as a potential radiological health hazard. The standards for exposure to radon and progeny have decreased over time as the understanding of their health risk has improved. In recent years there has been debate on the long-term releases (10,000 years) of radon from uranium mining and milling sites, focusing on abandoned, operational and rehabilitated sites. The primary purpose has been estimates of the radiation exposure of both local and global populations. Although there has been an increasing number of radon release studies over recent years in the USA, Australia, Canada and elsewhere, a systematic evaluation of this work has yet to be published in the international literature. This paper presents a detailed compilation and analysis of Australian studies. In order to quantify radon sources, a review of data on uranium mining and milling wastes in Australia, as they influence radon releases, is presented. An extensive compilation of the available radon release data is then assembled for the various projects, including a comparison to predictions of radon behaviour where available. An analysis of cumulative radon releases is then developed and compared to the UNSCEAR approach. The implications for the various assessments of long-term releases of radon are discussed, including aspects such as the need for ongoing monitoring of rehabilitation at uranium mining and milling sites and life-cycle accounting.     

Assessing the human health impacts of exposure to disinfection by-products — A critical review of concepts and methods

Understanding the public health implications of chemical contamination of drinking water is important for societies and their decision-makers. The possible population health impacts associated with exposure to disinfection by-products (DBPs) are of particular interest due to their potential carcinogenicity and their widespread occurrence as a result of treatments employed to control waterborne infectious disease.We searched the literature for studies that have attempted quantitatively to assess population health impacts and health risks associated with exposure to DBPs in drinking water. We summarised and evaluated these assessments in terms of their objectives, methods, treatment of uncertainties, and interpretation and communication of results.In total we identified 40 studies matching our search criteria. The vast majority of studies presented estimates of generic cancer and non-cancer risks based on toxicological data and methods that were designed with regulatory, health-protective purposes in mind, and therefore presented imprecise and biased estimates of health impacts. Many studies insufficiently addressed the numerous challenges to DBP risk assessment, failing to evaluate the evidence for a causal relationship, not appropriately addressing the complex nature of DBP occurrence as a mixture of chemicals, not adequately characterising exposure in space and time, not defining specific health outcomes, not accounting for characteristics of target populations, and not balancing potential risks of DBPs against the health benefits related with drinking water disinfection. Uncertainties were often poorly explained or insufficiently accounted for, and important limitations of data and methods frequently not discussed. Grave conceptual and methodological limitations in study design, as well as erroneous use of available dose–response data, seriously impede the extent to which many of these assessments contribute to understanding the public health implications of exposure to DBPs. In some cases, assessment results may cause unwarranted alarm among the public and potentially lead to poor decisions being made in sourcing, treatment, and provision of drinking water. We recommend that the assessment of public health impacts of DBPs should be viewed as a means of answering real world policy questions relating to drinking water quality, including microbial contaminants; that they should be conducted using the most appropriate and up-to-date data and methods, and that associated uncertainties and limitations should be accounted for using quantitative methods where appropriate.     

Indoor air pollution

As national trends accelerate towards the reduction of ventilation and infiltration rates in buildings, coupled with an increased use of synthetic chemicals in the indoor environment, a new phenomenon has arisen: the “sick building” syndrome. Traditional approaches to environmental health developed for the outdoor air, or for the industrial occupational setting, are inadequate to deal with this problem. It is argued that a comprehensive approach to the problem of indoor air pollution is necessary to protect public health.