Photodegradation of selected herbicides in various natural waters and soils under environmental conditions

The photochemical degradation of herbicides belonging to different chemical groups has been investigated in different types of natural waters (ground, river, lake, marine) and distilled water as well as in soils with different texture and composition. Studied herbicides and chemical groups included atrazine, propazine, and prometryne (s-triazines); propachlor and propanil (acetanilides); and molinate (thiocarbamate). The degradation kinetics were monitored under natural conditions of sunlight and temperature. Photodegradation experiments were performed in May through July 1998 at low concentrations in water samples (2-10 mg/L) and soil samples (5-20 mg/kg), which are close to usual field dosage. The photodegradation rates of all studied herbicides in different natural waters followed a pseudo-first order kinetics. The half-lives of the selected herbicides varied from 26 to 73 calendar days in waters and from 12 to 40 d in soil surfaces, showing that the degradation process depends on the constitution of the irradiated media. The presence of humic substances in the lake, river, and marine water samples reduces degradation rates in comparison with the distilled and ground water. On the contrary, the degradation in soil is accelerated as the percentage of organic matter increases. Generally, the photodegradation process in soil is faster than in water. The major photodegradation products identified by using gas chromatography-mass spectrometry (GC-MS) techniques were the hydroxy and dealkylated derivatives for s-triazines, the dechlorinated and hydroxy derivative for the anilides, and the keto-derivative for the thiocarbamate, indicating a similar mode of degradation for each chemical category.     

A desorption-dissolution model for metal release from polluted soil under reductive conditions

Various natural or provoked situations can cause significant variations in redox conditions that can induce reductive dissolution of soil components. When this happens, heavy metals that may be bound to solid phases are released. A surface desorption-dissolution model, which takes into account the effect of reductive conditions on surface site density, was established. This model is based on conventional reactions of surface hydroxyl groups, surface complexation reactions with cations and double-layer theory. The solid dissolution rate was taken into account, by following changes in total surface site number (i.e., cation exchange capacity [CEC]) under reductive conditions. This term was introduced in an electrostatic desorption model. Curves obtained by this calculation provided a good fit of experimental data as shown by statistical parameters. Experimental data corresponded to Pb and Cd released from a cultivated soil under reductive conditions induced by sodium ascorbate.     

Impact of climatic and soil conditions on environmental fate of atrazine used under plantation forestry in Australia

We studied the leaching and dissipation of atrazine (2-chloro-4-ethylamino-6-isopropylamino-1, 3, 5-s-triazine) and its two principal metabolites (desethylatrazine and desisopropylatrazine) for more than two years through soil profiles at five forestry sites across Australia (representing subtropical, temperate and Mediterranean climatic conditions with rainfall ranging from 780 to 1536 mm yr^?1). Following atrazine applications at local label rates, soil cores were collected at regular intervals (up to depths of 90–150 cm), and the residues of the three compounds in soil were analysed in composite samples using liquid chromatography. Bromide was applied simultaneously with atrazine to follow the movement of the soil water. While bromide ion rapidly leached through the entire profile, in most cases the bulk of atrazine, desethylatrazine and desisopropylatrazine remained in the top 45 cm of the soil profile. However, a small fraction of residue moved deeper into the soil profile and at a subtropical site (Toolara) trace levels (ng L^?1) of atrazine and one of its metabolites (DEA) were detected in perched groundwater located at a depth of 1.8 m. Data on the total residues of atrazine in soil profiles from all sites except the Tasmanian site fitted a first-order decay model. The half-life of atrazine in surface soils at the subtropical sites (Toolara and Imbil) ranged from 11 to 21 days. Four separate applications of atrazine at Toolara resulted in a narrow range of half-lives (16 ± 3.6 days), confirming relatively rapid dissipation of atrazine under subtropical conditions (Queensland). In contrast, a prominent biphasic pattern of initial rapid loss followed by very slow phase of degradation of atrazine was observed under the colder temperate climate of Highclere (Tasmania). The data showed that while its 50% (DT₅₀) loss occurred relatively rapidly (36 days), more than 10% of herbicide residue was still detectable in the profile even a year after application (DT₉₀ = 375 days). The rate of dissipation of atrazine at warm subtropical Queensland sites (Imbil and Toolara) was 2–3 times faster than sites located in colder climate of Tasmania. The marked contrast in DT₅₀ values between subtropical and temperate sites suggest that climatic conditions (soil temperature) is one of the key factors affecting atrazine dissipation. At the Tasmanian site, the combination of leaching of the herbicide in subsoil and slower microbial activity at cooler temperatures would have caused a longer persistence of atrazine.     

Measuring flux of soil fumigants using the aerodynamic and dynamic flux chamber methods

Methods for measuring and estimating flux density of soil fumigants under field conditions are important for the purpose of providing inputs to air dispersion models and for comparing the effects of management practices on emission reduction. The objective of this study was to measure the flux of 1,3-dichloropropene (1,3-D) and chloropicrin at a site in Georgia (GA) using the aerodynamic method and the dynamic flux chamber (FC) method. A secondary objective was to compare the effects of high density polyethylene (HDPE), and virtually impermeable film (VIF) tarps on fumigant flux at a site in Florida (FL). Chloropicrin and 1,3-D were applied by surface drip application of In-Line soil fumigant on vegetable beds covered by low density polyethylene (LDPE), HDPE, or VIF. The surface drip fumigation using In-Line and LDPE tarp employed in this study resulted in volatilization of 26.5% of applied 1,3-D and 11.2% of the applied chloropicrin at the GA site, as determined using the aerodynamic method. Estimates of mass loss obtained from dynamic FCs were 23.6% for 1,3-D and 18.0% for chloropicrin at the GA site. Flux chamber trials at the FL site indicate significant additional reduction in flux density, and cumulative mass loss when VIF tarp is used. This study supports the use of dynamic FCs as a valuable tool for estimating gas flux density from agricultural soils, and evaluating best management practices for reducing fumigant emissions to the atmosphere.     

An apparatus for measuring the gas permeability of films

The gas permeability of plastic films is important in packaging, containment, and agricultural fumigation. Recently, an approach for estimating the mass transfer coefficient of vapors across a film was presented by Papiernik et al. (2001). The mass transfer coefficient is an intrinsic property of a film-chemical combination, independent of the concentration gradient maintained across the film. Here we describe an apparatus useful for obtaining permeability data; the model of Papiernik et al. (2001) may be fitted to the data to determine mass transfer coefficients. The assembled equipment provides a sealed permeability cell, where a sample of the film to be tested is sandwiched between two static half-cells. Vapor is spiked to one side of the film and the concentrations in the spiked and receiving chamber are monitored until equilibrium. A sealed system is required for this approach; the permeability cells described here were gas-tight for >40 d. This approach produces reproducible measures of mass transfer coefficients that are not dependent on the size of the experimental apparatus. Model parameters were similar when fitted simultaneously as when determined independently from the same data set.     

A basin-scale approach to estimating stream temperatures of tributaries to the lower Klamath River, California

Stream temperature is an important component of salmonid habitat and is often above levels suitable for fish survival in the Lower Klamath River in northern California. The objective of this study was to provide boundary conditions for models that are assessing stream temperature on the main stem for the purpose of developing strategies to manage stream conditions using Total Maximum Daily Loads. For model input, hourly stream temperatures for 36 tributaries were estimated for 1 Jan. 2001 through 31 Oct. 2004. A basin-scale approach incorporating spatially distributed energy balance data was used to estimate the stream temperatures with measured air temperature and relative humidity data and simulated solar radiation, including topographic shading and corrections for cloudiness. Regression models were developed on the basis of available stream temperature data to predict temperatures for unmeasured periods of time and for unmeasured streams. The most significant factor in matching measured minimum and maximum stream temperatures was the seasonality of the estimate. Adding minimum and maximum air temperature to the regression model improved the estimate, and air temperature data over the region are available and easily distributed spatially. The addition of simulated solar radiation and vapor saturation deficit to the regression model significantly improved predictions of maximum stream temperature but was not required to predict minimum stream temperature. The average SE in estimated maximum daily stream temperature for the individual basins was 0.9 +/- 0.6 degrees C at the 95% confidence interval.     

A review of the military approach to urban environmental deterioration in Nigeria

The concern of this paper is a review of the urban environmental degradation and the current approach by the military (environmental task force) in solving the problem. It is based on the experience of a few states in Nigeria. The paper proposes a comprehensive urban planning approach which should be integrated with an awareness campaign.     

Bayesian approach to estimating margin of safety for total maximum daily load development

A Bayesian-updating approach is presented to the estimation of total uncertainty-based Margin of Safety (MOS) for Total Maximum Daily Load (TMDL) calculations. Probability distributions are presented to construct the likelihood function, the prior probability distribution, and the posterior (total uncertainty) probability distribution. The Bayesian-updating approach is demonstrated through a case study for the Lower Amite River, Louisiana. The posterior probability distribution-based on the Bayesian approach updates the standard deviation of summer dissolved oxygen in the Amite River from 1.88 mg/L to 2.10 mg/L when the total uncertainty is considered. Results from the Bayesian-updating approach are compared with two conventional methods. The dissolved oxygen reserve based on a conventional margin of safety of 20% is estimated to be 45,682.26 kg/Day. The second conventional method, where we consider the standard deviation of 1.88 mg/L, produces a dissolved oxygen reserve of 40,516.09 kg/Day. The Bayesian approach yields the dissolved oxygen reserve of 38,614.43 kg/Day with the first level (μ-σ) of MOS, producing a deficit of 5606.65 kg/Day in dissolved oxygen. The dissolved oxygen reserve deficit increases to 23,895.13 kg/Day when the second level (μ-2σ) of MOS is used, which escalated to 42,383.52 kg/Day when the highest level (μ-3σ) of MOS is used. While the total uncertainty-based Bayesian approach is demonstrated for a TMDL development on the Amite River, the overall approach could be applied in any river system with similar available data.     

The Delphi approach to the mediation of environmental disputes

Environmental disputes, in many countries, have taken on a ritualistic character. Their persistence, even after prolonged analysis and debate, suggests that they result from ideological rather than factual differences. Since no single ideological position holds a monopoly on the truth, effective environmental management would seem to require an integration of views, the problem being how to achieve this. One approach to this problem is illustrated in this article. Two factions in the spruce budworm dispute in New Brunswick, Canada, were engaged in a mediation exercise using the Delphi method. Details of the design and execution of this form of mediation are provided, together with an evaluation of the Delphi's effectiveness in this context.     

Are environmental conditions responsible for animal-plant carcinogen interaction? A study relating to enzootic bovine haematuria

Summary Enzootic bovine haematuria (EBH) is a disease of cattle characterised by intermittent presence of blood in their urine and tumours of mixed origin in the urinary bladder. No consensus exists on the etiology of the disease, though bracken fern (Pteridium aquilinum) and/or papilloma virus have been implicated. There are areas where the malady is absent but the putative incrementing factor(s) are present. This raised the possibility of investigations into the interplay of environmental factors which might be conducive to the possible exposures to carcinogens in some regions. A comparative study of areas where the disease is prevalent (enzootic), and where it is absent (nonenzootic), to determine the type of vegetation (including ferns), the grazing patterns, the animal husbandry practices and the agroclimatic conditions in animal-plant interaction, is presented. Most of the ferns are common to both enzootic and nonenzootic areas. Bracken fern, a known source of carcinogens is present in both enzootic and nonenzootic areas. Ferns, with the exception of Athyrium spp. are not acceptable to the cattle when offered, being smelt and rejected. Ferns are not used as bedding material in the enzootic area studied.The authors conclude that different environmental conditions and animal husbandry practices may result in the cattle in the enzootic areas being exposed to carcinogenic brackens and other ferns at a time when there is a shortage of other alternative feedstuffs.Drs Dawra, Sharma and Krishna work at the Palampur Regional Station of the Indian Veterinary Research Institute. Correspondence should be addressed to Dr Rajinder K. Dawra.     

A system dynamics approach for regional environmental planning and management: a study for the Lake Erhai Basin

In recent years, water-quality deterioration associated with rapid socio-economic development in the Lake Erhai Basin, China, has acquired more and more attention from the public and the government. An effective planning for the basin's environmental management system is desired for sustainable regional development. In this study, an environmental system dynamics model, named ErhaiSD, is developed for supporting this planning task. The ErhaiSD consists of dynamic simulation models that explicitly consider information feedback that governs interactions in the system. Such models are capable of synthesizing component-level knowledge into system behaviour simulation at an integrated level. This capability is very useful in analyzing and recommending policy decisions. For the study case, interactions among a umber of system components within a time frame of 15 years are examined dynamically. Four planning alternatives are considered. The base run is based on an assumption that the existing pattern of human activities will prevail in the entire planning horizon, and the other alternatives are based on previous planning studies. The contributions of various nonpoint pollution sources to the lake's eutrophication problems, and the effects of industrial activities and wastewater treatment processes on pollution problems in the Xier River are analyzed through the developed modeling system. The exercise draws attention to the implications of different alternatives to the system's environmental and socio-economic objectives. The modeling results are directly useful for simulating and evaluating a variety of decision actions and their dynamic consequences, and answering questions such as 'What should I do?', 'What if I do?' and 'What are the expected consequences?'.     

Towards a systematic approach of effect prediction: A handbook as guide and aid for environmental prediction. A review

Environmental impact assessment (EIA) is based on the results of effect prediction. In general, there is much diversity in the expertise in the field of environmental prediction between the different categories of actors involved in EIA. In practice it became obvious in The Netherlands that the accessibility and comprehensibility of existing relevant information was insufficient. For improvement, a series of systematic handbooks on effect prediction, useful for all categories of actors, has been developed in The Netherlands. In this way, the selection of effect prediction methods to be used in concrete circumstances is improved and speeded up for all parties involved in environmental prediction. After a discussion of the purpose of the handbook, the realization and structure of the series are presented. Finally, the use and (potential) benefits of the handbooks for environmental management are indicated.     

Application of polyacrylamide to reduce phosphorus losses from a Chinese purple soil: A laboratory and field investigation

Use of anionic polyacrylamide (PAM) to control phosphorus (P) losses from a Chinese purple soil was studied in both a laboratory soil column experiment and a field plot experiment on a steep slope (27%). Treatments in the column study were a control, and PAM mixed uniformly into the soil at rates of 0.02, 0.05, 0.08, 0.10, and 0.20%. We found that PAM had an important inhibitory effect on vertical P transport in the soil columns, with the 0.20% PAM treatment having the greatest significant reduction in leachate soluble P concentrations and losses resulting from nine leaching periods. Field experiments were conducted on 5 m wide by 21 m long natural rainfall plots, that allowed collection of both surface runoff and subsurface drainage water. Wheat was planted and grown on all plots with typical fertilizer applied. Treatments included a control, dry PAM at 3.9 kg ha^?1, dry PAM at 3.9 kg ha^?1 applied together with lime (CaCO₃ at 4.9 t ha^?1), and dry PAM at 3.9 kg ha^?1 applied together with gypsum (CaSO₄·2H₂O at 4 t ha^?1). Results from the field plot experiment in which 5 rainfall events resulted in measurable runoff and leachate showed that all PAM treatments significantly reduced runoff volume and total P losses in surface runoff compared to the control. The PAM treatments also all significantly reduced water volume leached to the tile drain. However, total P losses in the leachate water were not significantly different due to the treatments, perhaps due to the low PAM soil surface application rate and/or high experimental variability. The PAM alone treatment resulted in the greatest wheat growth as indicated by the plant growth indexes of wheat plant height, leaf length, leaf width, grain number per head, and dried grain mass. Growth indexes of the PAM with Calcium treatments were significantly lesser. These results indicate that the selection and use of soil amendments need to be carefully determined based upon the most important management goal at a particular site (runoff/nutrient loss control, enhanced plant growth, or a combination).     

A stochastic approach for the operation of a wind and pumped storage plant under a deregulated environment

To improve the competiveness in the energy market, it is necessary that the wind power plants provide guaranteed power generation, although, it is not possible to forecast power availability from wind power plant accurately. This paper presents a stochastic model and solution technique for the combined operation of wind and pumped storage power plants to improve the power availability and increasing the profit considering uncertainties of wind power generation. In this model, uncertainties in wind data have been forecasted for grid connected day-ahead market using Weibull distribution model. The imbalances in the forecasted wind data and the market demand have been reduced by operating the pumped storage power plant. In this stochastic mixed integer problem, pumped storage plant can take the supply either from the grid or from the wind power plant for the pumping operation to store the energy in order to utilize this energy during peak hours for increasing the overall revenue. The reliability of the pumped storage is improved by replacing the conventional unit with the adjustable speed type pumped storage unit. In order to prove the optimality of the solution, two case studies were considered. In case study–I, scheduling is provided by operating the conventional pumped storage unit, whereas in case study–II, adjustable speed pumped storage unit has been used. It has been found that the adjustable speed pumped storage unit has further reduced the imbalance between generated power and demand. The complete approach has been formulated and implemented using AMPL software.     

The effect of environmental conditions on the ability of a constructed wetland to disinfect municipal wastewaters

Constructed wetlands are widely used all over the world for the treatment of municipal wastewaters, which are characterized by high concentrations of pathogens. The objectives of this study were (1) to study the effect of solar radiation and temperature on the ability of a constructed wetland to reduce the concentration of total coliforms (TC), and (2) to evaluate the relationship between the presence of Salmonella spp. in the outflow and the concentration of TC. The results of this study showed that under Mediterranean environmental conditions, the percentage reduction in coliforms was lower during winter compared to all other seasons. Maximum removal of coliforms was achieved under conditions of high solar radiation and temperature. In addition, solar radiation was found to play a greater role in coliform die-off at low temperatures than at high temperatures. Finally, it was found that the probability of Salmonella spp. appearance in the outflow of the wetland was related to the concentration of TC. The increase in coliform bacteria in the effluents also increased the chances of Salmonella appearance. The risk of Salmonella spp. appearance in the outflow is minimized when the concentration of TC is below 10²/100 mL.     

The environmental attitudes inventory: A valid and reliable measure to assess the structure of environmental attitudes

Environmental attitudes (EA), a crucial construct in environmental psychology, are a psychological tendency expressed by evaluating the natural environment with some degree of favour or disfavour. There are hundreds of EA measures available based on different conceptual and theoretical frameworks, and most researchers prefer to generate new measures rather than organize those already available. The present research provides a cumulative and theoretical approach to the measurement of EA, in which the multidimensional and hierarchical nature of EA is considered. Reported are findings from three studies on the development of a psychometrically sound, multidimensional inventory to assess EA cross-culturally, the Environmental Attitudes Inventory (EAI). The EAI has twelve specific scales that capture the main facets measured by previous research. The twelve factors were established through confirmatory factor analyses, and the EAI scales are shown to be unidimensional scales with high internal consistency, homogeneity and high test-retest reliability, and also to be largely free from social desirability.     

An approach to tackling the environmental and health impacts of municipal solid waste disposal in developing countries

Indiscriminate disposal of municipal solid waste in developing countries poses severe environmental and health threats. The study proposes a new method for dealing with these problems. The hybrid structural interaction matrix (HSIM) was used to prioritise major identifiable environmental health factors arising from improper solid waste disposal. The simplistic resource allocation model was adopted to ensure optimality in the allocation of resources to prioritised factors. The study indicates that tackling environmental health impacts from the most prioritised negative disposal factors through optimal allocation of resources, will either reduce or eliminate the impacts associated with subsequent less prioritised factors that are direct consequences of the highly prioritised negative factors. The method proposed will aid decision makers in knowing which set of systemic factors are to be given preference and to what extent at given periods in time.