Copper regulation and homeostasis of Daphnia magna and Pseudokirchneriella subcapitata: influence of acclimation

This study aimed to evaluate (1) the capacity of the green alga Pseudokirchneriella subcapitata and the waterflea Daphnia magna to regulate copper when exposed to environmentally realistic copper concentrations and (2) the influence of multi-generation acclimation to these copper concentrations on copper bioaccumulation and homeostasis. Based on bioconcentration factors, active copper regulation was observed in algae up to 5 microg Cu L(-1) and in daphnids up to 35 mug Cu L(-1). Constant body copper concentrations (13+/-4 microg Cu g DW(-1)) were observed in algae exposed to 1 through 5 microg Cu L(-1) and in daphnids exposed to 1 through 12 microg Cu L(-1). At higher exposure concentrations, there was an increase in internal body copper concentration, while no increase was observed in bioconcentration factors, suggesting the presence of a storage mechanism. At copper concentrations of 100 microg Cu L(-1) (P. subcapitata) and 150 microg Cu L(-1) (D. magna), the significant increases observed in body copper concentrations and in bioconcentration factors may be related to a failure of this regulation mechanism. For both organisms, internal body copper concentrations lower than 13 microg Cu g DW(-1) may result in copper deficiency. For P. subcapitata acclimated to 0.5 and 100 microg Cu L(-1), body copper concentrations ranged (mean+/-standard deviation) between 5+/-2 microg Cu g DW(-1) and 1300+/-197 microg Cu g DW(-1), respectively. For D. magna, this value ranged between 9+/-2 microg Cu g DW(-1) and 175+/-17 microg Cu g DW(-1) for daphnids acclimated to 0.5 and 150 microg Cu L(-1). Multi-generation acclimation to copper concentrations >or =12 microg Cu L(-1) resulted in a decrease (up to 40%) in body copper concentrations for both organisms compared to the body copper concentration of the first generation. It can be concluded that there is an indication that P. subcapitata and D. magna can regulate their whole body copper concentration to maintain copper homeostasis within their optimal copper range and acclimation enhances these mechanisms.     

The characteristics of wet air oxidation of phenol over CuOx/Al2O3 catalysts: effect of copper loading

The nature of active copper species is well-known to vary with copper loading, i.e., isolated Cu(2+) to bulk CuO. In this work, however, the effect of copper loading on the activity and the selectivity was investigated for the wet oxidation of phenol over CuO(x)/Al(2)O(3) catalysts. The activity and the mineralization selectivity of the catalysts increased with copper loading up to 7wt% and remained almost the same at a higher loading. The optimum copper loading was about 7wt% for the wet oxidation of phenol over CuO(x)/Al(2)O(3) catalysts in this work. The nature of copper species with different loading was characterized with TPR, XRD, and XANES. The chemical states of copper in the CuO(x)/Al(2)O(3) catalysts were confirmed as varying with copper loading: isolated Cu(2+) ions for 1wt%; highly dispersed Cu(2+) cluster for 5wt% and 7wt%, and bulk CuO for 10-25wt%. The stability of the CuO(x)/Al(2)O(3) catalysts with different copper loading was also studied with respect to carbonaceous deposits and copper leaching.     

Bacterial stimulation of copper phytoaccumulation by bioaugmentation with rhizosphere bacteria

Copper contaminated areas pose environmental health risk to living organisms. Remediation processes are thus required for both crop production and industrial activities. This study employed bioaugmentation with copper resistant bacteria to improve phytoremediation of vineyard soils and copper mining waste contaminated with high copper concentrations. Oatmeal plant (Avena sativa L.) was used for copper phytoextraction. Three copper resistant bacterial isolates from oatmeal rhizosphere (Pseudomonas putida A1; Stenotrophomonas maltophilia A2 and Acinetobacter calcoaceticus A6) were used for the stimulation of copper phytoextraction. Two long-term copper contaminated vineyard soils (Mollisol and Inceptisol) and copper mining waste from Southern Brazil were evaluated. Oatmeal plants substantially extracted copper from vineyard soils and copper mining waste. As much as 1549 mg of Cu kg?1 dry mass was extracted from plants grown in Inceptisol soil. The vineyard Mollisol copper uptake (55 mg Cu kg?1 of dry mass) in the shoots was significantly improved upon inoculation of oatmeal plants with isolate A2 (128 mg of Cu kg?1 of shoot dry mass). Overall oatmeal plant biomass displayed higher potential of copper phytoextraction with inoculation of rhizosphere bacteria in vineyard soil to the extent that 404 and 327 g ha?1 of copper removal were respectively observed in vineyard Mollisol bioaugmented with isolate A2 (S. maltophilia) and isolate A6 (A. calcoaceticus). Results suggest potential application of bacterial stimulation of phytoaccumulation of copper for biological removal of copper from contaminated areas.     

Influence of acidification of CCB (Cu/Cr/B) impregnated wood on fungal copper tolerance

Copper tolerant fungi are known for more than 60 years but the complete mechanisms of copper tolerance by these fungi are still not fully understood. Copper tolerance has previously been linked to oxalic acid excretion by copper tolerant brown rot fungi. The oxalic acid then reacts with copper in the wood to form an insoluble and therefore less toxic copper oxalate. It has been suggested that copper tolerance could be due to lowering of the pH of the medium rather than the low solubility of copper oxalate. In order to elucidate this presumption, copper/chromium/boron (CCB) treated wood specimens were acidified with organic (oxalic, acetic, lactic, formic) and inorganic (sulphuric) acids and exposed to copper tolerant (Antrodia vaillantii, Leucogyrophana pinastri) and copper sensitive (Poria monticola, Gloeophyllum trabeum) brown rot fungal strains according to the mini block procedure. After eight weeks of exposure, the wood specimens were isolated and their mass losses determined. Additionally, electron paramagnetic resonance (EPR) measurements on the exposed specimens were performed. The EPR spectra of the specimens decayed by A. vaillantii were very similar to the EPR spectra of the specimens acidified with oxalic acid. Additionally, acidification of the CCB impregnated specimens made them significantly more susceptible to decay by both the copper tolerant and copper sensitive brown rot fungi.     

Depuration of copper and zinc by green oysters and blue mussels of Taiwan

This paper describes depuration processes of copper and zinc in green oysters (Crassostrea gigas) and in blue mussels (Mytilus smarangdium) collected from an environment with heavy copper contamination, and then transferred to natural clean seawater. Results show that the total loss of copper content per oyster is an exponential function of exposure time for the first 6 days with a depuration rate of 351 microg g(-1) day(-1) and then levels off. During this exponential decrease period approximately 67% of the copper accumulated in green oysters was depurated. However, when the copper contents in the oysters decreased from 2225 +/- 111 microg g(-1) to 344 +/- 18.7 microg g(-1) the depuration rates decreased from 245 microg g(-1) day(-1) to 0.08 microg g(-1) day(-1). This means that green oysters had a 16-fold higher copper depuration rate (351 microg g(-1) day(-1)) than normal oysters (21.5 microg g(-1) day(-1)) for the first 6 days. However, the depuration of accumulated copper and zinc by the mussels was a fast process in natural clean seawater. About 91% of the accumulated copper was lost during the first 6-day period; copper contents declined from 20.2 +/- 3.41 microg g(-1) to 1.80 +/- 0.21 microg g(-1). Only 36% of the accumulated zinc was lost during a depuration period of 6 days. Calculations show that the biological half-lives of copper in green and normal oysters were 11.6 and 25.1 days, respectively. The biological half-lives of zinc in green and normal oysters were 16.7 and 30.1 days, respectively. In spite of the relatively low initial copper content in blue mussels being 20.2 +/- 3.41 microg g(-1), the biological half-life is only 6.40 days. From these results it is important to emphasise that the fastest turnover rate is for copper in blue mussels. However, zinc is more retentive in blue mussels than copper.     

A field study of the ecotoxicology of copper to bryophytes

The impact of particulate copper, emitted from a copper rod-rolling plant, on the distribution of common grassland bryophytes has been investigated. Several areas of managed grassland, differing in total and water-extractable soil copper content, surrounding the factory were surveyed to establish species composition and distribution of the bryophyte flora. Clear differences emerged in the distribution patterns of the main acrocarpous (upright/tufted growth form) and pleurocarpous (horizontal/spreading growth form) species present, with some species being more or less confined to soils with elevated copper (Pohlia nutans), whilst others were absent from such sites. The distribution of acrocarpous species was not related to increasing soil copper concentrations, whereas pleurocarpous species showed considerable sensitivity. This may not be a simple reflection of sensitivity to copper; ecological factors such as differences in patterns of water and soluble copper uptake between the different growth forms may be significant factors, as may be changes in the vascular plant flora giving rise to differences in population densities of potential competitors between sites. Pleurocarpous species are absent from grassland where total soil copper >550 microg g(-1) dry weight, whilst the less sensitive acrocarpous species occur at total soil copper levels in excess of 2000 microg g(-1) dry weight.     

Relationship between copper speciation in sediments and bioaccumulation by marine bivalves of Taiwan

This paper evaluates the relationships between copper species in sediments and accumulation by the purple clam (Hiatula diphos) and venus clam (Gomphina aeguilatera) collected from the field and culture (aquaculture) ponds in the polluted coastal area of Lukang, Taiwan. Sediment was sampled along with the molluscs, including oysters (Crassostrea gigas), purple clams (Hiatula diphos), rock-shells (Thais clavigera), venus clams (Gomphina aeguilatera), and hard clams (Meretrix lusoria), from two unique environments of Lukang during the period from August 1993 to July 1994. The data indicate that the total copper concentrations in sediments from culture ponds (185 microg g(-1)) was higher than those of the field (44.0 microg g(-1)). Copper species in sediments were analyzed by a sequential leaching technique. Results show that concentrations of various copper species in the sediments are in the range of 1.14 +/- 0.59 to 13.2 +/- 22.4 microg g(-1) and 0.36 +/- 0.24 to 133 +/- 36.7 microg g(-1) for the two environments, respectively. Also the exchangeable copper in sediment from culture ponds was 15 times higher than that from the field. In addition, the sum of exchangeable and copper carbonates had the highest percentages of copper in both the pond sediment (86.6 %) and the field sediment (50.7 %). Maximum copper concentrations (309 +/- 35.1 microg g(-1)) in oysters were much higher than those in the other benthic organisms by about 4-127 times. Similarly, the data also showed that copper concentrations in Thais clavigera were 12-32 times higher than those in other benthic organisms. Copper concentrations in various benthic organisms differed significantly (p < 0.05) from that in Thais clavigera. This capacity makes Thais clavigera a potential candidate for monitoring copper in marine sediments. In terms of copper species, the best correlation was generally obtained between copper carbonates in sediments and copper concentrations in Hiatula diphos (r = 0.886*). A strong multiple regression correlation (p < 0.05, r2 = 0.7894) also indicates that the copper carbonates may dominate as the available form of copper to Hiatula diphos from various environments in the Lukang coastal area under natural physicochemical conditions.     

氧化亚铁硫杆菌浸铜研究及胞外多聚物的作用

为了获得氧化亚铁硫杆菌(Acidithiobacillus ferrooxidans,A.f)以及胞外多聚物(extracellular polymeric sub-stances,EPS)对铜浸出的作用结果,进行了透析袋实验,设置2个处理,2者的浸出液均为成熟菌液,但一个将铜片装入透析袋中以隔离A.f及EPS与铜的直接接触。结果表明:(1)菌液的处理和加透析袋的处理中铜都得到了浸出,240 h铜的浸出浓度分别为6 796 mg/L和1 366 mg/L,可知A.f及EPS与铜片直接接触能促进铜的浸出;(2)透析袋的处理中Fe3+保持较高浓度,说明Fe3+与EPS络合后被阻挡在透析袋外面从而不能与铜反应,可知EPS在A.f浸铜中起了媒介载体的作用;(3)2者的SEM图表明无透析袋的处理A.f与铜在实验初期发生了吸附,实验后期则无,实验初期铜快速浸出是由于传质距离短,而后期速度变缓是由于传质距离增大。     

Copper-binding efficacy of water-soluble chitosans: characterization by aqueous binding isotherms

The major objective of the study is to measure directly the isotherms of copper binding onto soluble chitosan preparations, using ion-selective electrode technique. Copper uptake is found to decrease strongly when chitosan acetylation degree or chitosan concentration increased. When relating the bound copper concentrations to content of non-acetylated amine groups in a chitosan, differences between copper uptake on different chitosan preparations become reduced but not disappear. Other effects, in addition to the contents of non-acetylated amine groups, can involve differences in the copper binding by different chitosans. Due to isotherm non-linearity, the distribution coefficient K(d) of copper between a water-soluble chitosan and an aqueous solution may vary by two orders of magnitude as the free copper concentration C(free) varied. Linear relation between logK(d) normalized by free amine group content of chitosans and logC(free) may help in preliminary estimating of the copper binding by water-soluble chitosans at a certain pH.     

Toxicity of copper excess on the lichen Dermatocarpon luridum: antioxidant enzyme activities

The aim of this study was to investigate the toxicity of copper on the aquatic lichen Dermatocarpon luridum focusing on the activities of some antioxidant enzymes. Investigations were conducted using increasing copper concentrations (0.00, 0.25, 0.50, 0.75 and 1.00 mM CuSO(4) x 5H(2)O) in synthetic freshwater that emulated the major ion compositions of its natural water biota; time course measurement was 0, 3, 6, 12, 24 and 48 h. The copper concentration in thalli increased with its increase in the medium and the duration of treatment. Copper induced lipid peroxidation, measured using the hydroperoxi-conjugated dienes (HPCD) concentration. The decrease in the protein concentrations was similar in thalli exposed to copper concentrations above 0.50 mM and the decrease was twice lower in thalli exposed to 0.25 mM copper. The activities of antioxidant enzymes measured were differently affected by copper excess. For 0.25 mM copper, the activities of SOD (superoxide dismutase) and APX (ascorbate peroxidase) were unchanged when compared with unstressed thalli whereas the CAT (catalase) activity increased and the GR (glutathione reductase) activity decreased. The activities of SOD and APX increased in thalli exposed to concentrations above 0.50mM copper. The CAT activity increased after the first 3h of experiments at these concentrations and then decreased with the duration of treatment at an activity lower than in the unstressed plant. Whereas the APX activity increased, the GR activity similarly decreased for the copper concentration tested whatever the duration of the experiment.     

Preparation and characterization of surfactant-modified hydroxyapatite/zeolite composite and its adsorption behavior toward humic acid and copper(II)

A novel composite material, i.e., surfactant-modified hydroxyapatite/zeolite composite, was used as an adsorbent to remove humic acid (HA) and copper(II) from aqueous solution. Hydroxyapatite/zeolite composite (HZC) and surfactant-modified HZC (SMHZC) were prepared and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscope. The adsorption of HA and copper(II) on SMHZC was investigated. For comparison purposes, HA adsorption onto HZC was also investigated. SMHZC exhibited much higher HA adsorption capacity than HZC. The HA adsorption capacity for SMHZC decreased slightly with increasing pH from 3 to 8 but decreased significantly with increasing pH from 8 to 12. The copper(II) adsorption capacity for SMHZC increased with increasing pH from 3 to 6.5. The adsorption kinetic data of HA and copper(II) on SMHZC obeyed a pseudo-second-order kinetic model. The adsorption of HA and copper(II) on SMHZC took place in three different stages: fast external surface adsorption, gradual adsorption controlled by both film and intra-particle diffusions, and final equilibrium stage. The equilibrium adsorption data of HA on SMHZC better fitted to the Langmuir isotherm model than the Freundlich isotherm model. The equilibrium adsorption data of copper(II) on SMHZC could be described by the Langmuir, Freundlich, and Dubinin–Radushkevich isotherm models. The presence of copper(II) in solution enhanced HA adsorption onto SMHZC. The presence of HA in solution enhanced copper(II) adsorption onto SMHZC. The mechanisms for the adsorption of HA on SMHZC at pH 7 may include electrostatic attraction, organic partitioning, hydrogen bonding, and Lewis acid–base interaction. The mechanisms for the adsorption of copper(II) on SMHZC at pH 6 may include surface complexation, ion exchange, and dissolution–precipitation. The obtained results indicate that SMHZC can be used as an effective adsorbent to simultaneously remove HA and copper(II) from water.     

The role of copper(II) chloride in the formation of organic chlorine in fly ash

In the de-novo synthesis and formation of PCDD/PCDF, the transfer of inorganic chlorine to the carbonaceous material of fly ash plays an important role. Here, copper acts as a catalyst in the chlorination reaction. In experiments in the range of 250-350 degrees C under helium, we determined the stoichiometry of the chlorination reaction with model systems. Therefore, it was necessary to develop a method to quantify the copper(II) and copper(I) ions. In a combination of solid electron paramagnetic (spin) resonance spectroscopy (EPR) for Cu(I), and X-ray fluorescence spectroscopy (XRFA) analysis for Cu (total), we found a way for the quantification of copper(I) and (II). With these experiments, we can show that the chlorination reaction is relatively fast and comes to a stop under helium, after the copper(II) is reduced. The ratio between the organic chlorine formed and copper(II) reduced is, at the end of the reaction, 0.5, which is in agreement with the following reaction: 2CuCl2 + R-H-->2CuCl + R-Cl + HCl.     

Effects of copper(II) and copper oxides on THMs formation in copper pipe

Little is known about how the growth of trihalomethanes (THMs) in drinking water is affected in copper pipe. The formation of THMs and chlorine consumption in copper pipe under stagnant flow conditions were investigated. Experiments for the same water held in glass bottles were performed for comparison. Results showed that although THMs levels firstly increased in the presence of chlorine in copper pipe, faster decay of chlorine as compared to the glass bottle affected the rate of THMs formation. The analysis of water phase was supplemented by surface analysis of corrosion scales using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDX). The results showed the scales on the pipe surface mainly consisted of Cu₂O, CuO and Cu(OH)₂ or CuCO₃. Designed experiments confirmed that the fast depletion of chlorine in copper pipe was mainly due to effect of Cu₂O, CuO in corrosion scales on copper pipe. Although copper(II) and copper oxides showed effect on THMs formation, the rapid consumption of chlorine due to copper oxide made THM levels lower than that in glass bottles after 4 h. The transformations of CF, DCBM and CDBM to BF were accelerated in the presence of copper(II), cupric oxide and cuprous oxide. The effect of pH on THMs formation was influenced by effect of pH on corrosion of copper pipe. When pH was below 7, THMs levels in copper pipe was higher as compared to glass bottle, but lower when pH was above 7.     

Effect of copper(II) on natural organic matter removal during drinking water coagulation using aluminum-based coagulants.

Coagulation has been proposed as a best available technology for controlling natural organic matter (NOM) during drinking water treatment. The presence of heavy metals such as copper(II) in source water, which may form copper-NOM complexes and/or interact with a coagulant, may pose a potential challenge on the coagulation of NOM. In this work, the effect of copper(II) on NOM removal by coagulation using alum or PAX-18 (a commercial polymerized aluminum chloride from Kemiron Inc., Bartow, Florida) was examined. The results show that the presence of 1 to 10 mg/L of copper(H) in the simulated waters improved the total organic carbon (TOC) removal by up to 25% for alum coagulation and by up to 22% for PAX-18 coagulation. The increased NOM removal with the presence of copper(II) in the waters can most likely be ascribed to the formation copper-NOM complexes that may be more adsorbable on aluminum precipitates and to the formation of copper(II) co-precipitates that may also adsorb NOM. The presence of 1 to 5 mg/L of copper(I) in the waters containing 3 mg/L NOM as carbon was reduced below the maximum contaminant level goal (1.3 mg/L as copper) using either coagulant. The results suggest that the presence of copper(H) in source water may not adversely affect the NOM removal by coagulation. A good linear correlation was observed between the TOC removal efficiency and the log-total moles of the precipitated metals, which include the metal ion from a coagulant and the divalent metal ion(s) in source water.     

Copper and trace element fractionation in electrokinetically treated methanogenic anaerobic granular sludge

The effect of electrokinetic treatment (0.15 mA cm(-2)) on the metal fractionation in anaerobic granular sludge artificially contaminated with copper (initial copper concentration 1000 mg kg(-1) wet sludge) was studied. Acidification of the sludge (final pH 4.2 in the sludge bed) with the intention to desorb the copper species bound to the organic/sulfides and residual fractions did not result in an increased mobility, despite the fact that a higher quantity of copper was measured in the more mobile (i.e. exchangeable/carbonate) fractions at final pH 4.2 compared to circum-neutral pH conditions. Also addition of the chelating agent EDTA (Cu2+:EDTA4- ratio 1.2:1) did not enhance the mobility of copper from the organic/sulfides and residual fractions, despite the fact that it induced a reduction of the total copper content of the sludge. The presence of sulfide precipitates likely influences the copper mobilisation from these less mobile fractions, and thus makes EDTA addition ineffective to solubilise copper from the granules.     

In vitro studies of copper release from powder particles in synthetic biological media

The aim of this paper is to provide quantitative data on copper release from powder particles of different copper materials, including artificial copper patina, Cu(2)O and metallic Cu, when exposed to different synthetic biological media to simulate an inhalation scenario and/or skin contact. Generated data may contribute in risk assessment of potential health effects following exposure to and handling of various copper materials. All tests were performed in vitro to determine total copper concentrations, release rates of total copper, and to elucidate its time-dependence. The copper release process was interpreted in terms of specific surface area, surface morphology-, and composition. All powder materials show a time-dependent release process with total copper release rates less than 3 microg/cm(2) per hour at steady state conditions, for all media investigated. The importance of using relevant test media when simulating different interstitial lung conditions and difficulties encountered when comparing powder particles of essentially different properties are thoroughly discussed.     

Leaching behavior and chemical stability of copper butyl xanthate complex under acidic conditions

Although xanthate addition can be used for treating copper-containing wastewater, a better understanding of the leaching toxicity and the stability characteristics of the copper xanthate complexes formed is essential. This work was undertaken to evaluate the leaching behavior of copper xanthate complex precipitates by means of toxicity characteristics leaching procedure (TCLP) and semi-dynamic leaching test (SDLT) using 1 N acetic acid solution as the leachant. Also, the chemical stability of the copper xanthate complex during extraction has been examined with the studying of variation of chemical structure using UV-vis, Fourier transform infrared and X-ray photoelectron spectroscopies (XPS).Both TCLP and SDLT results showed that a negligible amount of copper ion was leached out from the copper xanthate complex precipitate, indicating that the complex exhibited a high degree of copper leaching stability under acidic conditions. Nevertheless, chemical structure of the copper xanthate complex precipitate varied during the leaching tests. XPS data suggested that the copper xanthate complex initially contained both cupric and cuprous xanthate, but the unstable cupric xanthate change to the cuprous form after acid extraction, indicating the cuprous xanthate to be the final stabilizing structure. Despite that, the changes of chemical structure did not induce the rapid leaching of copper from the copper xanthate complex.     

The effect of copper speciation on the formation of chlorinated aromatics on real municipal solid waste incinerator fly ash

A limited amount of information exists regarding the relationship between the chemical form of copper and the formation of chlorinated aromatics in fly ash. To understand the effects of the various forms of copper on the formation of chlorinated aromatics in real fly ash, we determined the chemical forms of copper present in various types of real fly ash using X-ray absorption near edge structure (XANES) and evaluated the relationship between the chemical forms of copper and the formation of chlorinated aromatics. Copper chloride hydroxide (CuCl2 x 3Cu(OH)2) and cuprous chloride (CuCl) were the predominant copper species found in real fly ash. Although pure cupric chloride (CuCl2) is known to be the most active catalyst for the formation of chlorinated aromatics under experimental conditions with synthetic fly ash, CuCl2 was not found in every real fly ash sample. The amount of copper chloride hydroxide was positively correlated with the formation of chlorinated aromatics in real fly ash and is, consequently, considered to be one of the key species involved in the formation of chlorinated aromatics.     

Effect of copper on the adsorption of p-nitrophenol onto soils

The effect of copper on adsorption of p-nitrophenol on two typical Chinese soils was investigated using a batch-equilibration method. Adsorption experiments were carried out when both copper and p-nitrophenol were adsorbed simultaneously, and when copper was previously adsorbed on soils. It was observed that adsorption of p-nitrophenol decreased with increasing copper concentrations thereby indicating a competition between copper and p-nitrophenol for occupying the adsorption sites on soils. Moisture increased the hydrated sphere and the acidity of water surrounding the cation, which further reduced the adsorption of p-nitrophenol. Fourier transform infrared spectroscopy study provided the direct evidence for the coordination of p-nitrophenol sorbed by soils with metal cation in n-hexane system. It was observed that the perturbations included a red shift of the nu(asym) (NO) band, a concomitant blue-shift of the nu(sym) (NO) band and a blue-shift of C-N band when compared with the infrared spectra obtained from water solution.     

Environmental impact of two successive chemical treatments in a small shallow eutrophied lake: Part II. Case of copper sulfate

The appearance of cyanobacteria ( > 10 colony per ml) was not prevented after alum treatment. In order to prevent cyanobacteria efflorescences in a small shallow polymictic lake (Courtille, France), copper sulfate was applied. Treatment level was 63 microg 1(-1) as Cu2+ from CUSO4, 5 H2O. Cyanobacteria were kept under control during the summer. Microcystis sp. completely disappeared, which allowed swimming in the lake throughout the tourist season. Microcystis only reappeared 2 months after the treatment. Copper content in the water column only returned to its background level 2 months after copper addition. This high residence time of copper in the water might have been caused by complexation and adsorption of copper on natural organic matter, whose level was high in the ecosystem studied. A mechanism of transfer of 'truly' dissolved copper towards particulate copper has been underlined and explains the disappearance of this fraction of copper in the water column.