A systematic review of biodiversity and demographic change: A misinterpreted relationship?

Demographic change is supposed to be the most important indirect driver for changing biodiversity. In this article, a systematic review of 148 studies was conducted to examine the scientific evidence for this relationship and to identify potential gaps in research. We explored the spatial distribution of studies, the categories addressed with respect to biodiversity and demographic change, and the ways in which their relationships were conceptualised (spatially and temporally) and valued. The majority of studies were carried out in Africa, Europe and North America. Our analysis confirms the trend that demographic phenomena were mostly found to negatively influence biodiversity. However, a considerable number of studies also point towards impacts that were context dependent, either positive or negative under certain circumstances. In addition to that we identified significant gaps in research. In particular, there is a lack of addressing (1) other demographic aspects such as population decline, age structure or gender differences, (2) spatial variability of, e.g. human population growth, (3) long-term effects of demographic processes, and (4) the context dependency (e.g. regulations/law enforcement, type of human activities, and choice of scale or proxy). We conclude there is evidence that the relationship between biodiversity and demographic change is much more complex than expected and so far represented in research. Thus, we call for a social–ecological biodiversity research that particularly focusses on the functional relation between biodiversity and human activities, namely the different types, context, and interdependent dynamics (spatial and temporal) of this complex relation.

     

Validation of road vehicle and traffic emission models – A review and meta-analysis

Road transport is often the main source of air pollution in urban areas, and there is an increasing need to estimate its contribution precisely so that pollution-reduction measures (e.g. emission standards, scrapage programs, traffic management, ITS) are designed and implemented appropriately. This paper presents a meta-analysis of 50 studies dealing with the validation of various types of traffic emission model, including ‘average speed’, ‘traffic situation’, ‘traffic variable’, ‘cycle variable’, and ‘modal’ models. The validation studies employ measurements in tunnels, ambient concentration measurements, remote sensing, laboratory tests, and mass-balance techniques. One major finding of the analysis is that several models are only partially validated or not validated at all. The mean prediction errors are generally within a factor of 1.3 of the observed values for CO₂, within a factor of 2 for HC and NO_x, and within a factor of 3 for CO and PM, although differences as high as a factor of 5 have been reported. A positive mean prediction error for NO_x (i.e. overestimation) was established for all model types and practically all validation techniques. In the case of HC, model predictions have been moving from underestimation to overestimation since the 1980s. The large prediction error for PM may be associated with different PM definitions between models and observations (e.g. size, measurement principle, exhaust/non-exhaust contribution).Statistical analyses show that the mean prediction error is generally not significantly different (p < 0.05) when the data are categorised according to model type or validation technique. Thus, there is no conclusive evidence that demonstrates that more complex models systematically perform better in terms of prediction error than less complex models. In fact, less complex models appear to perform better for PM. Moreover, the choice of validation technique does not systematically affect the result, with the exception of a CO underprediction when the validation is based on ambient concentration measurements and inverse modelling. The analysis identified two vital elements currently lacking in traffic emissions modelling: 1) guidance on the allowable error margins for different applications/scales, and 2) estimates of prediction errors. It is recommended that current and future emission models incorporate the capability to quantify prediction errors, and that clear guidelines are developed internationally with respect to expected accuracy.     

Application of ozone for the removal of bisphenol A from water and wastewater – A review

The extensive use of Bisphenol A (BPA) in the plastics industry has led to increasing reports of its presence in the aquatic environment, with concentrations of ng L^?1 to μg L^?1. Various advanced oxidation processes, including ozonation, have been shown to effectively degrade BPA. This paper reviews the current advancements in using ozone to remove BPA from water and wastewater.Most of the published work on the oxidation of BPA by ozone has focused on the efficiency of BPA removal in terms of the disappearance of BPA, and the effect of various operational parameters such as ozone feed rate, contact time and pH; some information is available on the estrogenic activity of the treated water. Due to increasing operational reliability and cost effectiveness, there is great potential for industrial scale application of ozone for the treatment of BPA. However, there is a significant lack of information on the formation of oxidation by-products and their toxicities, particularly in more complex matrices such as wastewater, and further investigation is needed for a better understanding of the environmental fate of BPA.     

A review of water electrolysis–based systems for hydrogen production using hybrid/solar/wind energy systems

Environmental Science and Pollution Research - Hydrogen energy, as clean and efficient energy, is considered significant support for the construction of a sustainable society in the face of global...     

Solution by dilution?—A review on the pollution status of the Yangtze River

The Yangtze River has been a source of life and prosperity for the Chinese people for centuries and is a habitat for a remarkable variety of aquatic species. But the river suffers from huge amounts of urban sewage, agricultural effluents, and industrial wastewater as well as ship navigation wastes along its course. With respect to the vast amounts of water and sediments discharged by the Yangtze River, it is reasonable to ask whether the pollution problem may be solved by simple dilution. This article reviews the past two decades of published research on organic pollutants in the Yangtze River and several adjacent water bodies connected to the main stream, according to a holistic approach. Organic pollutant levels and potential effects of water and sediments on wildlife and humans, measured in vitro, in vivo, and in situ, were critically reviewed. The contamination with organic pollutants, including polycyclic aromatic hydrocarbons, polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans, polybrominated diphenyl ethers (PBDEs), perfluorinated compounds (PFCs), and others, of water and sediment along the river was described. Especially Wuhan section and the Yangtze Estuary exhibited stronger pollution than other sections. Bioassays, displaying predominantly the endpoints mutagenicity and endocrine disruption, applied at sediments, drinking water, and surface water indicated a potential health risk in several areas. Aquatic organisms exhibited detectable concentrations of toxic compounds like PCBs, OCPs, PBDEs, and PFCs. Genotoxic effects could also be assessed in situ in fish. To summarize, it can be stated that dilution reduces the ecotoxicological risk in the Yangtze River, but does not eliminate it. Keeping in mind an approximately 14 times greater water discharge compared to the major European river Rhine, the absolute pollution mass transfer of the Yangtze River is of severe concern for the environmental quality of its estuary and the East China Sea. Based on the review, further research needs have been identified.     

A review of bioretention components and nutrient removal under different climates—future directions for tropics

Bioretention systems have been implemented as stormwater best management practices (BMPs) worldwide to treat non-point sources pollution. Due to insufficient research, the design guidelines for bioretention systems in tropical countries are modeled after those of temperate countries. However, climatic factors and stormwater runoff characteristics are the two key factors affecting the capacity of bioretention system. This paper reviews and compares the stormwater runoff characteristics, bioretention components, pollutant removal requirements, and applications of bioretention systems in temperate and tropical countries. Suggestions are given for bioretention components in the tropics, including elimination of mulch layer and submerged zone. More research is required to identify suitable additives for filter media, study tropical shrubs application while avoiding using grass and sedges, explore function of soil faunas, and adopt final discharged pollutants concentration (mg/L) on top of percentage removal (%) in bioretention design guidelines.

     

Removal effects and potential mechanisms of bisphenol A and 17α-ethynylestradiol by Biogenic Mn oxides generated by Bacillus sp. WH4

Environmental Science and Pollution Research - Endocrine disrupting compounds (EDCs), such as bisphenol A (BPA) and 17α-ethynylestradiol (EE2), have increasingly negative effects on human and...     

A model of natural degradation of 17-α-ethinylestradiol in surface water and identification of degradation products by GC-MS

Over the past decade, the environment has been polluted by a wide spectrum of exogenous chemicals and environmental analysis has become one of the most progressive parts of analytical research. The aim of this work was to determine the kinetics of natural degradation, and to identify the degradation products of the massively used estrogenic drug, 17-α-ethinylestradiol. The photodegradation, oxidation and thermostability conditions were selected according to ICH requirements for pharmaceutical stability testing. A simple 72-h photodegradation study in purified water exhibited significant first-order kinetics with the kinetic constant k = 0.0303 h^?1, and degradation halftime 22.8 h. The basic halftime could be reduced to 17.1 h by the addition of sea salt, and increase in temperature. Monohydroxy, dihydroxy and dehydrogenated derivatives of ethinylestradiol with intact steroidal structure were identified as major degradation products resulting from simple photodegradation. The addition of an oxidative agent significantly accelerated the degradation rate; combined with higher temperature, the degradation halftime was reduced to 1.1 h with the first-order kinetic constant k = 0.632 h^?1. TOC analysis showed a notable decrease of organic mass (18% in 3 days) during oxidation experiments, and confirmed the degradation of steroidal structure.

     

Impact of reaction products from building materials and furnishings on indoor air quality—A review of recent advances in indoor chemistry

The variety of chemical substances present in modern building products, household products and furnishings provides potential for chemical reactions in the material (case 1), on the material surface (case 2) and in the gas phase (case 3). Such “indoor chemistry” is known as one of the main reasons for primary and secondary emissions. The conditions of production often cause unwanted side reactions and a number of new compounds can be found in finished products. Elevated temperatures are responsible for the degradation of cellulose, decomposition of non-heat-resistant additives and other thermally induced reactions like Diels–Alder synthesis. Heterogeneous chemistry takes place on the surface of materials. Well-known examples are the formation of aliphatic aldehydes from the oxidation of unsaturated fatty acids or the cleavage of photoinitiators under the influence of light. In case of composite flooring structures hydrolysis is one of the major pathways for the appearance of alcohols from esters. If different kinds of material are fixed together, emissions of new VOCs formed by inter-species reactions are possible. Other indoor air pollutants are formed by rearrangement of cleavage products or by metabolism. Compounds with –CC– bonds like terpenes, styrene, 4-phenylcyclohexene, etc. undergo gas phase reactions with O₃, NO_x, OH and other reactive gases. It has been shown that such products derived from indoor-related reactions may have a negative impact on indoor air quality due to their low odor threshold or health-related properties. Therefore, the understanding of primary and secondary emissions and the chemical processes behind is essential for the evaluation of indoor air quality. This publication gives an overview on the current state of research and new findings regarding primary and secondary emissions from building products and furnishings.     

A review on efficient electromagnetic interference shielding materials by recycling waste—a trio of land to lab to land concept

Environmental Science and Pollution Research - The materials used in electrical and electronic applications have great importance and broader applications, but they have severe electromagnetic...     

Removal of bisphenol A and methylene blue through persulfate activation by calcinated α-MnO2 nanorods: effect of ultrasonic assistance and toxicity assessment

Environmental Science and Pollution Research - This work investigates the efficacy of α-MnO2 nanorods for persulfate-mediated degradation of bisphenol A (BPA) and methylene blue (MB), in...     

A discursive review of the textual use of ‘trapped’ in environmental migration studies: The conceptual birth and troubled teenage years of trapped populations

First mooted in 2011, the concept of Trapped Populations referring to people unable to move from environmentally high-risk areas broadened the study of human responses to environmental change. While a seemingly straightforward concept, the underlying discourses around the reasons for being ‘trapped’, and the language describing the concept have profound influences on the way in which policy and practice approaches the needs of populations at risk from environmental stresses and shocks. In this article, we apply a Critical Discourse Analysis to the academic literature on the subject to reveal some of the assumptions implicit within discussing ‘trapped’ populations. The analysis reveals a dominant school of thought that assisted migration, relocation, and resettlement in the face of climate change are potentially effective adaptation strategies along a gradient of migrant agency and governance.     

A review of plant–pharmaceutical interactions: from uptake and effects in crop plants to phytoremediation in constructed wetlands

Pharmaceuticals are commonly found both in the aquatic and the agricultural environments as a consequence of the human activities and associated discharge of wastewater effluents to the environment. The utilization of treated effluent for crop irrigation, along with land application of manure and biosolids, accelerates the introduction of these compounds into arable lands and crops. Despite the low concentrations of pharmaceuticals usually found, the continuous introduction into the environment from different pathways makes them ‘pseudo-persistent’. Several reviews have been published regarding the potential impact of veterinary and human pharmaceuticals on arable land. However, plant uptake as well as phytotoxicity data are scarcely studied. Simultaneously, phytoremediation as a tool for pharmaceutical removal from soils, sediments and water is starting to be researched, with promising results. This review gives an in-depth overview of the phytotoxicity of pharmaceuticals, their uptake and their removal by plants. The aim of the current work was to map the present knowledge concerning pharmaceutical interactions with plants in terms of uptake and the use of plant-based systems for phytoremediation purposes.     

Study of the accumulation of contaminants by Cyperus alternifolius,Lemna minor,Eichhornia crassipes,and Canna × generalis in some contaminated aquatic environments

Environmental Science and Pollution Research - Today, environmental pollution, especially heavy metal pollution, is known as a new and possibly more dangerous pollutant than other environmental...     

A review of Yemen’s current energy situation,challenges, strategies,and prospects for using renewable energy systems

Environmental Science and Pollution Research -     

Do plant traits help to design green walls for urban air pollution control? A short review of scientific evidences and knowledge gaps

Environmental Science and Pollution Research - It is often claimed that green walls (GW) and living wall systems (LWS) have a positive effect on urban air pollution problems if their plants...     

Removal of the emerging contaminant bisphenol A by an ureasil–PEO hybrid membrane: experimental study and molecular dynamic simulation

This work reports the use of a cross-linked ureasil–PEO hybrid matrix (designated PEO800) as an efficient adsorbent to retain the emerging contaminant bisphenol A (BPA) from an aqueous medium. The in-deep experimental and theoretical results provide information about the interactions between PEO800 and BPA. The in situ UV-vis spectroscopy data and the pseudo-first order, pseudo-second order, Elovich, and Morris–Webber intraparticle diffusion models allowed us to propose a three-step mechanism for the adsorption of BPA onto PEO800. The results indicate that the pseudo-first-order kinetic model effectively describes the adsorption of BPA onto PEO800. Differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy confirmed the interaction of PEO800 with BPA, showing an alteration in the chemical environment of the polymer ether oxygen atoms present in the hybrid matrix. The molecular dynamic simulation provides further evidence that the BPA molecules interact preferentially with PEO. The amount of desorbed BPA depended on the pH and solvent used in the assays. This work provides new opportunities for using the hydrophilic ureasil–PEO matrix which has demonstrated its abilities in being a fast and easy alternative to successfully removing organic contaminants from aqueous mediums and therefore having potential applications in water remediation.

Graphical abstract