Cemetery waste as a substream of municipal waste: research and structure of the selective waste collection in Poland

Environmental Science and Pollution Research - Cemetery waste (CW) constitutes one of the streams of municipal waste (MW). Based on the available data, it can be said that it accounts for about 1%...     

Determination of sterols, estrogens and inorganic ions in waste water and size-segregated aerosol particles emitted from waste water treatment

Concentrations of steroids and inorganic ions were measured in waste water of an aerated sand trap as well as in aerosol particles emitted from this tank at the waste water treatment plant (WWTP) of Bayreuth, Germany, in January and February 2003. The investigations comprised seven sterols, two estrogens, and several inorganic ions. Since an appropriate method for the determination of sterols in waste water was not available, a new method based on solid phase extraction was developed. The concentrations of the sterols coprostanol and cholesterol amounted to 30-180 microg l(-1) in waste water and to 400-5000 pg m(-3) in aerosol particles. All other sterols were present in markedly lower concentrations. The mean concentrations of the two estrogens estrone and 17beta-estradiol were about 165 pg m(-3) in aerosol particles. The steroid concentrations in both waste water and aerosol particles varied greatly over time, however with the exception of coprostanol, no clear correlation was detected between concentrations in waste water and aerosol particles.     

A comparative study on per capita waste generation according to a waste collecting system in Korea

As cities are becoming increasingly aware of problems related to conventional mobile collection systems, automated pipeline-based vacuum collection (AVAC) systems have been introduced in some densely populated urban areas. The reasons are that in addition to cost savings, AVAC systems can be efficient, hygienic, and environmentally friendly. Despite difficulties in making direct comparisons of municipal waste between a conventional mobile collection system and an AVAC system, it is meaningful to measure the quantities in each of these collection methods either in total or on a per capita generation of waste (PCGW, g/(day*capita)) basis. Thus, the aim of this study was to assess the difference in per capita generation of household waste according to the different waste collection methods in Korea. Observations on household waste show that there were considerable differences according to waste collection methods. The value of per capita generation of food waste (PCGF) indicates that a person in a city using AVAC produces 60 % of PCGF (109.58 g/(day*capita)), on average, compared with that of a truck system (173.10 g/(day*capita)) as well as 23 %p less moisture component than that with trucks. The value of per capita generation of general waste (PCGG) in a city with an AVAC system showed 147.73 g/(day*capita), which is 20 % less than that with trucks delivered (185 g/(day*capita)). However, general waste sampled from AVAC showed a 35 %p increased moisture content versus truck delivery.     

Qualitative and quantitative assessment of waste generation in a refrigerator-manufacturing plant based on a waste tree and mass balance

In this study, wastes originating at each production station during refrigerator manufacturing were identified and classified based on a waste tree. A mass balance study revealed a total waste production factor of 0.046 kg/kg of a product of which 75.3%, 23.9%, and 0.8% were non-hazardous wastes (NHWs), packaging wastes (PWs), and hazardous wastes (HWs), respectively. Wastes produced during refrigerator manufacturing were grouped under 35 different waste codes. Waste codes that contributed more than 5% by weight were 15 02 02 (contaminated absorbent material), 15 01 10 (contaminated packaging), 16 02 13 (electronic cards), 07 02 14 (polyol) and 08 05 01 (isocyanates), 19 08 13 (treatment sludge), 16 02 15 (capacitors), and 13 01 13 (hydraulic oil) for HWs, 12 01 01 (ferrous metal), and 16 02 16 (components) for NHWs, and, finally, 15 01 03 (wooden), 15 01 01 (paper&cardboard), and 15 01 02 (plastic) for PWs over 5 years. Scrap costs were used as a surrogate to determine production stages that generated high amounts of metal and plastic wastes. Logarithmically, increasing and decreasing trends were observed for PWs and NHWs over the study period, respectively. HW amounts did not exhibit a statistically significant trend. Twenty-eight BATs (best available techniques) were identified that could be applied in refrigerator manufacturing for waste minimization and management. Among those, 8 of them were proposed for further improvement for waste management in the facility.

     

固体废物相关概念的基本特点

固体废物法对废物的一些概念进行了定义,在固体废物环境管理当中,对这些概念缺乏深入认识,导致在实际管理中对固体废物和危险废物的调查、认定、统计、管理、预测、设施建设等一系列与废物相关的行动出现偏差甚至不准确。对固体废物、危险废物以及废物利用、处置、贮存、排放等概念包含的内容进行了研究,提出了一些新的认识观点。     

Biomethanation of tobacco waste

Tobacco is an important cash crop produced in considerable quantities in India. During cigarette manufacturing large quantities of tobacco waste are produced annually and its disposal is a serious ecological problem. In the present study a process for the biodegradation of tobacco waste, under methanogenic conditions, was developed so that environmental pollution can be reduced while producing biogas as a useful energy source. The methanogenic bacterial consortium developed for the anaerobic degradation of tobacco waste without any chemical pretreatment in a single stage digester at 15 days HRT (hydraulic retention time) has been successfully scaled-up to install a 10 m(3) biogas plant. The gas yields (1 kg(-1 TS fed) day(-1)) varied from 169 to 282 depending on the ambient temperatures. The methane content in the biogas produced was 60%. The pH and VFA content of the digested slurry were 6.8 +/- 0.1 and 599 mg litre(-1), respectively. Nicotine, COD and BOD reductions were 75, 60 and 80%, respectively.     

Generation and management of waste electric vehicle batteries in China

With the increasing adoption of EVs (electric vehicles), a large number of waste EV LIBs (electric vehicle lithium-ion batteries) were generated in China. Statistics showed generation of waste EV LIBs in 2016 reached approximately 10,000 tons, and the amount of them would be growing rapidly in the future. In view of the deleterious effects of waste EV LIBs on the environment and the valuable energy storage capacity or materials that can be reused in them, China has started emphasizing the management, reuse, and recycling of them. This paper presented the generation trend of waste EV LIBs and focused on interrelated management development and experience in China. Based on the situation of waste EV LIBs management in China, existing problems were analyzed and summarized. Some recommendations were made for decision-making organs to use as valuable references to improve the management of waste EV LIBs and promote the sustainable development of EVs.     

Slurry-phase biodegradation of weathered oily sludge waste

We assessed the biodegradation of a typical oily sludge waste (PB401) in Mexico using several regimes of indigenous microbial consortium and relevant bioremediation strategies in slurry-phase system. Abiotic loss of total petroleum hydrocarbons (TPH) in the PB401 was insignificant, and degradation rates under the various treatment conditions ranged between 666.9 and 2168.7 mg kg(-1) day(-1) over a 15 days reaction period, while viable cell count peaked at between log(10)5.7 and log(10)7.4 cfu g(-1). Biostimulation with a commercial fertilizer resulted in 24% biodegradation of the TPH in the oily waste and a corresponding peak cell density of log(10)7.4 cfu g(-1). Addition of non-indigenous adapted consortium did not appear to enhance the removal of TPH from the oily waste. It would appear that the complexities of the components of the alkylaromatic fraction of the waste limited biodegradation rate even in a slurry system.     

危险废物分级管理方法研究

危险废物因具有毒性、易燃性、腐蚀性和反应性等多种危害特性,如果暴露于环境中将会对人类健康和生态环境造成很大威胁.深入分析了欧美等一些国家对危险废物进行分级管理的方法,针对中国目前危险废物的产生现状和管理现状,提出了综合考虑危险废物的产生量和活性大小等各个方面,借助风险评价对危险废物进行分级管理的方法和原则,以及相应的分级管理程序的建议,为完善中国的危险废物管理体系提供参考.     

Passengers waste production during flights

We assume that during flights the amount of waste that is produced is limited. However, daily, approximately 8000 commercial airplanes fly above Europe’s airspace while at the same time, more than 17,000 commercial flights exist in the entire world. Using primary data from airlines, which use the Larnaca’s International Airport (LIA) in Cyprus, we have tried to understand why wastes are produced during a typical flight such as food waste, paper, and plastics, as well as how passengers affect the production of those wastes. The compositional analysis took place on 27 flights of 4 different airlines which used LIA as final destination. The evaluation indicated that the passenger’s habits and ethics, and the policy of each airline produced different kinds of waste during the flights and especially food waste (FW). Furthermore, it was observed that the only waste management strategy that exists in place in the airport is the collection and the transportation of all those wastes from aircrafts and from the airport in the central unit for further treatment. Hence, this research indicated extremely difficulties to implement any specific waste minimization, or prevention practice or other sorting methods during the flights due to the limited time of the most flights (less than 3 h), the limited available space within the aircrafts, and the strictly safety roles that exist during the flights.     

An analysis of biomedical waste incineration.

The California Air Resources Board (ARB) completed a series of source tests of eight operating biomedical waste incinerators (BMWI) under conditions of typical operation. The emissions of certain metals, and chlorinated dioxins and furans in the flue gases of BMWI are relatively high in comparison to emissions from other combustion sources, such as hazardous waste or municipal waste incinerators of modern design. This study reports on an analysis of the status of the existing regulatory framework and the California data base. Clarification of definitional issues at the federal level is needed to effectively treat BMWI management issues. Although few relationships among combustion parameters and emissions were uncovered, patterns of emissions were evident, suggesting commonality and relationships among the waste stream constituents and emissions. Potential implications for future research, operation of BMWI, controls and source reduction and waste segregation strategies are also discussed.     

Solid waste forecasting using modified ANFIS modeling

Solid waste prediction is crucial for sustainable solid waste management. Usually, accurate waste generation record is challenge in developing countries which complicates the modelling process. Solid waste generation is related to demographic, economic, and social factors. However, these factors are highly varied due to population and economy growths. The objective of this research is to determine the most influencing demographic and economic factors that affect solid waste generation using systematic approach, and then develop a model to forecast solid waste generation using a modified Adaptive Neural Inference System (MANFIS). The model evaluation was performed using Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and the coefficient of determination (R2). The results show that the best input variables are people age groups 0-14, 15-64, and people above 65 years, and the best model structure is 3 triangular fuzzy membership functions and 27 fuzzy rules. The model has been validated using testing data and the resulted training RMSE, MAE and R2 were 0.2678, 0.045 and 0.99, respectively, while for testing phase RMSE =3.986, MAE = 0.673 and R2 = 0.98.

Implications: To date, a few attempts have been made to predict the annual solid waste generation in developing countries. This paper presents modeling of annual solid waste generation using Modified ANFIS, it is a systematic approach to search for the most influencing factors and then modify the ANFIS structure to simplify the model. The proposed method can be used to forecast the waste generation in such developing countries where accurate reliable data is not always available. Moreover, annual solid waste prediction is essential for sustainable planning.     

Public policy impacts on the generation and disposal of hazardous waste in New York State

A number of policies adopted by the federal government and the state have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects. Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to "higher" waste handling technologies in response to several policy interventions.     

Pesticide residues in biological waste

The aim of this study was to detect crop protection products (CPP) in single fractions of biological waste and to estimate pesticide concentrations in biological waste, depending on its composition. The composition of biological waste was determined from the literature, which provided information on its local and seasonal variability. The residue analysis included 17 pesticides for the analysis of tropical fruit peels and 48 pesticides for other fractions, e.g. vegetables, other fruits and ornamental flowers. The freeze-dried samples were extracted ultrasonically and purified by means of gel permeation chromatography. The analysis was carried out using gas chromatography with a mass selective detector in the selected ion monitoring mode. All tropical fruit peels contained CPP-residues. Thiabendazole was the most important contaminant with respect to the concentration and frequency of occurrence. The vegetables, other fruits and flowers also contained CPP-residues, such as the fungicides captan and dodemorph and the insecticide endosulfan. Based on import data and the composition of biological waste, the CPP-content of biological waste was estimated for rural and urban areas in summer and winter. Due to the higher percentage of tropical fruit peels, thiabendazole was the main contaminant in winter. The total concentration of CPP, summed up over all substances, ranged between 828 and 1829 μg (kg ww)⁻¹.     

Characterization of municipal waste in Kampala,Uganda

In Kampala, Uganda, about 28,000 tons of waste is collected and delivered to a landfill every month. Kampala Capital City Authority (KCCA) records show that this represents approximately 40% of the waste generated in the city. The remaining uncollected waste is normally dumped in unauthorized sites, causing health and environmental problems. However, the organic fraction of domestic waste can provide an opportunity to improve livelihoods and incomes through fertilizer and energy production. This study characterized the municipal waste generated in Kampala and delivered to Kiteezi landfill between July 2011 and June 2012, that is, covering the dry and wet months. On each sampling day, waste was randomly selected from five trucks, sorted and weighed into different physical fractions. Samples of the organic waste from each truck were analyzed for total solids, major nutrients, and energy content. During the wet months, the waste consisted of 88.5% organics, 3.8% soft plastics, 2.8% hard plastics, 2.2% paper, 0.9% glass, 0.7% textiles and leather, 0.2% metals, and 1.0% others. During the dry months, the waste consisted of 94.8% organics, 2.4% soft plastics, 1.0% hard plastics, 0.7% papers, 0.3% glass, 0.3% textile and leather, 0.1% metals, and 0.3% others. The organic waste on average had a moisture content of 71.1% and contained 1.89% nitrogen, 0.27% phosphorus, and 1.95% potassium. The waste had an average gross energy content of 17.3 MJ/kg. It was concluded that the organic waste generated can be a suitable source of some plant nutrients that are useful especially in urban agriculture.

Implications:?The result of the waste characterization in Kampala was found to be significantly different from that obtained for other Sub-Saharan African (SSA) cities, showing that studies assuming average values for the waste fractions are likely to result in erroneous results. Furthermore, no reduction in organic fraction of the waste was noticed when compared with a study done two decades ago in spite of greatly improved economic status of Kampala city, a finding that is not in agreement with several other similar studies done for other SSA cities.     

Survey of waste comminglers' VOC exposures

Twelve U.S. universities performing hazardous waste solvent commingling operations were surveyed for waste handler exposures to 45 U.S. Environmental Protection Agency (EPA)-designated volatile organic compounds (VOCs). Personal exposures (n = 33) and area concentrations (n = 30) were determined using gas chromatography/ mass spectrometry (GC/MS) analysis of passively collected samples. Air monitoring data were used to determine the veracity of laboratory-generated reports of waste container contents. Participants completed a questionnaire concerning the use of personal protective equipment, ventilation, and other appropriate safety equipment for their specific commingling operation. Follow-up telephone interviews were conducted to elucidate safeguards in place. Results showed that personal exposures exceeded area concentrations in 70% of operations. For the contaminant concentrations reported, 17% of personal samples exceeded Occupational Safety & Health Administration (OSHA) time-weighted average or ceiling limit values. Methylene chloride was a frequently seen airborne contaminant not listed on drum inventory sheets. When airborne constituents were compared with container content tags, 44% of the chemicals detected in air were omitted from the waste tags. This study concluded that the most frequently necessary safeguard is respiratory protection, preferably a supplied-air-type. The use of local exhaust ventilation systems rather than dilution or natural systems and facility operation in a totally explosion-safe manner are also recommended.     

Characterization of food waste from different sources in Hong Kong

Food waste from different sources or at different generation stages may have different compositional characteristics and is therefore suitable for recycling into different products. To have a better understanding of their chemical composition, five food waste types were collected, namely, household kitchen waste (HH), preconsumption and postconsumption food waste from a hotel (Hpr and Hpo), wet market food waste (WM) and kitchen waste from a Chinese restaurant (CR), and their compositions were assessed monthly for 1 year. They served as suitable feedstock for various conversion technologies according to their chemical profiles. HH and CR had higher crude protein content (26%) and considerable amounts of minerals, making them nutritionally suitable for feeding animals. Preconsumption food wastes Hpr and WM had more favorable C:N ratios (16.5–17.4) and crude fat contents (4.6–6.5%) as feedstock for composting. Postconsumption food wastes were potential feedstock for the production of biogas and biodiesel because of the higher dry matter (>26%) and fat content (>13%). The coefficients of variation (CV) in all nutrients analyzed except Ca for postconsumption food wastes ranged from 5% to 37%, which showed lower temporal variability than preconsumption food wastes (CVs 10–131%). This implies that the composition of postconsumption food waste was relatively less fluctuating and can be considered a more reliable feedstock for food waste conversion.

Implications: Characterization of food waste composition from different sources and determination of their temporal variation were performed to understand their characteristics and facilitate sound food waste management. Separating food wastes according to their sources and types helps reduce their composition variability, and thus increases the consistence in food-waste-derived products and recycling success. Study on temporal variation indicates that postconsumption food wastes varied less with time and could serve as reliable feedstocks for food waste conversion.     

洗像废液的分质处理

对洗像过程中产生的洗像废液按照成分的不同进行分质处理。其中 ,有机废液采用高温焚烧的方法进行处理 ;无机废液根据主要成分的化学性质分别采用中和、氧化等方法进行处理。通过室内试验 ,确定了处理工艺的主要参数 ,并根据试验结果 ,利用废液处理站设施处理了 1.6 4t洗像废液。处理后排放的废水、废气均达到了国家有关排放标准     

Dioxin mass balance in a municipal waste incinerator

A dioxin mass balance in an Spanish municipal waste incinerator (MWI) is presented. Input and output inventories from two sampling collection episodes including the analysis of PCDD/PCDF in urban solid waste (USW), stack gas emissions, fly ash and slag are reported. In one collection the levels of USW were around 8 pg I-TEQ/g and non-thermal destruction was observed overall. In the other collection the levels of USW were higher (around 64 pg I-TEQ/g) and the dioxin balance revealed a thermal destruction. Analysis of the different waste materials (textile, organic, plastic, wood and paper) was performed separately and the textile samples presented the highest levels.     

Antimony in municipal waste.

Antimony content in municipal waste was studied. Sampled municipal waste was dried, crushed and analyzed. Antimony determinations were performed by Kjeldahl decomposition--batch hydride generation spectrometry and neutron activation analysis. Overall content of antimony in waste was 40-50 g/t raw waste. It was estimated than 20% of the annual production of antimony was discarded as municipal waste in Japan. Leaching of antimony from antimony-added materials may occur, because "small tips" involved considerable amounts of antimony.