Footprints on ammonia concentrations from environmental regulations

Releases of ammonia (NH3) to the atmosphere contribute significantly to the deposition of nitrogen to both terrestrial and aquatic ecosystems. This is the background for the national NH3 emission ceilings in Europe. However, in some countries the national legislation aims not only to meet these ceilings but also to reduce the atmospheric nitrogen deposition to local ecosystems. Such measures to reduce the load of nitrogen to local ecosystems were introduced in Denmark in 1994. In this paper we demonstrate that this regulation is reflected in the NH3 concentrations in Denmark. The Danish legislation forces farmers to applying manure to the fields during the crop-growing season. We have analyzed the seasonal variation in local NH3 concentrations over the time period of 1989-2003. During this period the seasonal variation has changed from having moderate spring and autumn concentration peaks to having a single and much more pronounced spring peak. In the analysis we apply an NH3 emission model to demonstrate that these changes in the seasonal variation are a result of the changes in the Danish legislation. The analysis demonstrates the strength of using a high-resolution emission model in the analysis of routine monitoring data.     

Development of aquatic life criteria in China: viewpoint on the challenge

While more developed countries have a well-established systems to develop water quality criteria (WQC), little research has been done on the adequacy of the current WQC to protect endemic species of China. In order to maintain the health of aquatic ecosystems in China, a series of projects to establish national WQC based on regional characteristics has recently been initiated. However, the establishment of a completely novel methodology would be costly and time consuming. Also, due to the similarities in physiologies and natural histories of classes of aquatic organisms, there is no reason to believe that WQC would not be sufficient to protect unique species in China. This review was undertaken to identify key outstanding issues regarding establishment of aquatic life criteria (ALC) to be applied in China, including prioritization of chemicals, test species, mode of action, field/semi-field data, and methods of aggregating the information and calculating the ALC. This was used to identify the principle issues that need to be addressed in order to better understand the methods for development of criteria for the protection of aquatic life and provide a reference to China and other developing countries committed to the establishment of their own WQC system.     

Matching of an anaerobic animal waste digester with a dual-fuel generator unit

This paper describes a scientific method for matching an anaerobic fermentation digester using animal dung with a diesel engine power-generating unit, in such a way as to specify the digester capacity to be suitable for various specific energy needs. An experimental model consisting of an Indian-type digester connected to a constant speed, single cylinder 3 kW diesel engine, was designed, constructed and tested in the laboratory to obtain a comprehensive understanding of the performance. The engine was operated with dual fuel (biogas and diesel). A performance map was derived to express the ability of the digester to satisfy the different loading conditions of the engine at different mass ratios of the two fuels. Dimensional analysis was carried out to compile the geometric and operating variables of the digester to establish a relation that can be used to demonstrate the effect of the daily loading on the rate of biogas generation using different digester capacities and different proportions of solids in the fermentation material. The study provides the means to match the geometric and dynamic parameters of a digester to specific power requirements within the applied range.     

Assessment of susceptibility of olive cultivars to the Bactrocera oleae (Gmelin, 1790) and Camarosporium dalmaticum (Thüm.) Zachos & Tzav.-Klon. attacks in Calabria (Southern Italy)

Within the framework of research concerning the application of techniques alternative to chemical pesticides for control of parasites, the C.R.A. Experimental Institute for Olive Growing for many years has been performing a large investigation in order to detect sources of genetic resistance in olive germplasm. In the present study we observed the behavior related to the olive fly (Bactrocera oleae) infestation and Camarosporium dalmaticum infection of ten olive cultivars farmed under the same agronomic and climatic conditions in Calabria, Southern Italy. The sampling and the data collecting were carried out in three different ripening times.The drupe amount of oleuropein and cyanidine was detected by laboratory analyses in order to verify a possible correlation between these molecules and the level of infestation/infection of the above-mentioned parasites. The obtained data were submitted to analysis of variance. In relation to the fungal infection the results displayed that cvs Tonda nera dolce showed the lowest susceptibility, while the cv Giarraffa turned out to be the most susceptible. The less susceptible cultivars to the phytophagous were Tonda nera dolce and Bhardi Tirana. Since the less susceptible cultivar to olive fly attacks are the same observed in relation to the susceptibility to olive fruit rot, it is suggested a relation between the olive fly infestation and the fungal infection. It suggests the utility to achieve these results both to transfer directly to the farmers' world and to emphasize ecosystem health and biodiversity conservation.     

Experimental variability in characterization of cyfluthrin sorption to soil

To assess the risk of a pesticide to leach to groundwater or to run off to surface water after application, it is necessary to characterize the sorption of the pesticide to soil. For pyrethroids, their hydrophobicity, strong sorption to various materials, and low solubility make it difficult to accurately characterize sorption processes. The objective of this research was to evaluate the variability in cyfluthrin ((RS)-alpha -cyano-4-fluoro-3-phenoxybenzyl (1RS,3RS;1RS,3SR)-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate) sorption to soil as affected by experiment conditions. To minimize cyfluthrin sorption on the walls of glass, silanized-glass, stainless steel, and PTFE centrifuge tubes, cyfluthrin solution was added to aqueous soil slurries or directly to soil, after which it was equilibrated with aqueous solution. Depending on the soil, variation in sorption coefficients, Koc, obtained using different experimental methodologies with one soil can be comparable to the variation in Koc values obtained for soils with different physical and chemical properties using one method. Koc values for cyfluthrin ranged from 56,000 to 300,000 L kg-1. Sorption methodology needs to be evaluated before sorption coefficients are used in predictive transport models.     

Variability in climate change simulations affects needed long-term riverine nutrient reductions for the Baltic Sea

Changes to runoff due to climate change may influence management of nutrient loading to the sea. Assuming unchanged river nutrient concentrations, we evaluate the effects of changing runoff on commitments to nutrient reductions under the Baltic Sea Action Plan. For several countries, climate projections point to large variability in load changes in relation to reduction targets. These changes either increase loads, making the target more difficult to reach, or decrease them, leading instead to a full achievement of the target. The impact of variability in climate projections varies with the size of the reduction target and is larger for countries with more limited commitments. In the end, a number of focused actions are needed to manage the effects of climate change on nutrient loads: reducing uncertainty in climate projections, deciding on frameworks to identify best performing models with respect to land surface hydrology, and increasing efforts at sustained monitoring of water flow changes.     

Response of multixenobiotic defence mechanism in Dreissena polymorpha exposed to environmental stress

Multixenobiotic defence mechanism (MXDM) has been recently described as a first line defence system in many aquatic organisms and it has raised attention for its potential as an early biomarker of exposure to environmental stress. In order to investigate the relevance of this biomarker in the freshwater zebra mussel Dreissena polymorpha, we examined its response to exposure and to cessation of exposure. For this purpose, depurated zebra mussels were transplanted to natural rivers or exposed to medium experimentally contaminated with fuel oil 2 in the laboratory. After the exposure period, mussels were submitted to depuration in clean water in the laboratory. The level of MXDM activity was assessed by the efflux method that allows a simple and fast measure of the rate of rhodamine B efflux. MXDM activity was induced following exposure and induction appears earlier after laboratory exposure (3 days) than after in the field exposure (3-14 days). The level of MXDM response could not be directly correlated to exposure dose in the laboratory and to isolated physicochemical parameters or AOX levels in the field. The behaviour of MXDM activity seems to reflect the occurrence of exposure to a global stress rather than to specific compounds. Our results highlighted the possibility to monitor MXDM response in the freshwater zebra mussel. In spite of the difficulty to interpret responses resulting from the lack of specificity of response, multixenobiotic defence mechanism displays qualities to represent a biomarker of general stress in freshwater ecosystems.     

Developing conceptual frameworks for the recovery of aquatic biota from acidification

Surface water acidity is decreasing in large areas of Europe and North America in response to reductions in atmospheric S deposition, but the ecological responses to these water-quality improvements are uncertain. Biota are recovering in some lakes and rivers, as water quality improves, but they are not yet recovering in others. To make sense of these different responses, and to foster effective management of the acid rain problem, we need to understand 2 things: i) the sequence of ecological steps needed for biotic communities to recover; and ii) where and how to intervene in this process should recovery stall. Here our purpose is to develop conceptual frameworks to serve these 2 needs. In the first framework, the primarily ecological one, a decision tree highlights the sequence of processes necessary for ecological recovery, linking them with management tools and responses to bottlenecks in the process. These bottlenecks are inadequate water quality, an inadequate supply of colonists to permit establishment, and community-level impediments to recovery dynamics. A second, more management-oriented framework identifies where we can intervene to overcome these bottlenecks, and what research is needed to build the models to operationalize the framework. Our ability to assess the benefits of S emission reduction would be simplified if we had models to predict the rate and extent of ecological recovery from acidification. To build such models we must identify the ecological steps in the recovery process. The frameworks we present will advance us towards this goal.     

Access to information and sustainable development: friend or foe?

This paper calls the reader's attention to the extent to which the advancement of sustainable development depends on industry's technology development ability and on the important role assigned to governments by environmental law and policy as brokers of industrial information. It argues that the provision of indiscriminate, unrestricted access to information may hinder industry's ability to contribute to the future of sustainable development. Rather than advocating restriction of the public's right to access, the paper proposes the need to review the manner in which the government's role is carried out in the light of its potential negative impact on environmentally oriented technology development.     

Design of an optimum air monitoring network for exposure assessments

Nonlinear programming techniques are frequently used to design optimum monitoring networks. These mathematically rigorous techniques are difficult to implement or cumbersome when considering other design criteria. This paper presents a more pragmatic approach to the design of an optimal monitoring network to estimate human exposure to hazardous air pollutants. In this approach, an air quality simulation model is used to produce representative air quality patterns, which are then combined with population patterns to obtain typical exposure patterns. These combined patterns are used to determine ‘figures of merit’ for each potential monitoring site, which are used to identify and rank the most favorable sites. The spatial covariance structure of the air quality patterns is used to draw a ‘sphere of influence’ around each site to identify and eliminate redundant monitoring sites. This procedure determines the minimum number of sites required to achieve the desired spatial coverage. This methodology was used to design an optimal ambient air monitoring network for assessing population exposure to hazardous pollutants in the southeastern Ohio River valley.     

Influence of uncertain reaction rates on ozone sensitivity to emissions

Air quality models rely upon simplified photochemical mechanisms to efficiently represent the thousands of chemical species that interact to form air pollution. Uncertainties in the chemical reaction rate constants and photolysis frequencies that comprise those mechanisms can generate uncertainty in the estimation of pollutant concentrations and their responsiveness to emission controls. A high-order sensitivity analysis technique is applied to quantify the extent to which reaction rate uncertainties influence estimates of ozone concentrations and their sensitivities to precursor emissions during an air pollution episode in Houston, Texas. Several reactions were found to have much larger proportional effects on ozone’s sensitivities to emissions than on its concentrations. In particular, uncertainties in photolysis frequencies and in the rate of reaction between NO₂ and OH to form nitric acid can significantly influence the magnitude and sign of peak ozone sensitivity to nitrogen oxide (NO_x) emissions. Ozone sensitivity to VOCs exhibits a much more muted response to uncertainties in the reaction rate constants and photolysis frequencies considered here. The results indicate the importance of accurate reaction rate constants to predicting the ozone impacts resulting from NO_x emission controls.     

Forest owners’ perceptions of ecotourism: Integrating community values and forest conservation

The use of forest land for ecotourism has been well accepted due to its ability to provide income to local people and to conserve the forest. Preparing the forest with infrastructure to attract and educate visitors has been reported of importance. This study applied Q methodology in a small rural community of the State of Puebla, Mexico, to reveal forest owners’ perceptions to build infrastructure in their forest as part of their ecotourism project. It also discloses forest owners’ underlying motives to use their forest for ecotourism. Ecotourism is perceived as a complementary activity to farming that would allow women to be involved in community development. Low impact infrastructure is desired due to forest owners’ perception to preserve the forest for the overall community well-being.     

Assessing performance and closure for soil vapor extraction: integrating vapor discharge and impact to groundwater quality

Soil vapor extraction (SVE) is typically effective for removal of volatile contaminants from higher-permeability portions of the vadose zone. However, contamination in lower-permeability zones can persist due to mass transfer processes that limit the removal effectiveness. After SVE has been operated for a period of time and the remaining contamination is primarily located in lower-permeability zones, the remedy performance needs to be evaluated to determine whether the SVE system should be optimized, terminated, or transitioned to another technology to replace or augment SVE. Numerical modeling of vapor-phase contaminant transport was used to investigate the correlation between measured vapor-phase mass discharge, MF(r), from a persistent, vadose-zone contaminant source and the resulting groundwater contaminant concentrations. This relationship was shown to be linear, and was used to directly assess SVE remediation progress over time and to determine the level of remediation in the vadose zone necessary to protect groundwater. Although site properties and source characteristics must be specified to establish a unique relation between MF(r) and the groundwater contaminant concentration, this correlation provides insight into SVE performance and support for decisions to optimize or terminate the SVE operation or to transition to another type of treatment.     

Sulfidation treatment of molten incineration fly ashes with Na2S for zinc, lead and copper resource recovery

The present study focuses on the conversion of heavy metals involved in molten incineration fly ashes to metal sulfides which could be thereafter separated by flotation. The sulfidation treatment was carried out for five molten incineration fly ashes (Fly ash-A to Fly ash-E) by contacting each fly ash with Na(2)S solution for a period of 10 min to 6h. The initial molar ratio of S(2-) to Me(2+) was adjusted to 1.20. The conversion of heavy metals to metal sulfides was evaluated by measuring the S(2-) residual concentrations using an ion selective electrode. The formation of metal sulfides was studied by XRD and SEM-EDS analyses. In the case of Fly ash-A to Fly ash-D, more than 79% of heavy metals of zinc, lead and copper was converted to metal sulfides within the contacting period of 0.5h owing to a fast conversion of metal chlorides to metal sulfides. By contrast, the conversion of about 35% was achieved for Fly ash-E within the same contacting period, which was attributed to a high content of metal oxides. Further, the S(2-) to Me(2+) molar ratio was reduced to 1.00 to minimize Na(2)S consumption and the conversions obtained within the contacting period of 0.5h varied from 76% for Fly ash-D to 91% for Fly ash-C. Finally, soluble salts such as NaCl and KCl were removed during the sulfidation treatment, which brought about a significant enrichment in metals content by a factor varying from 1.5 for Fly ash-D to 4.9 for Fly ash-A.     

Monitoring, modelling and environmental exposure assessment of industrial chemicals in the aquatic environment

Monitoring and laboratory data play integral roles alongside fate and exposure models in comprehensive risk assessments. The principle in the European Union Technical Guidance Documents for risk assessment is that measured data may take precedence over model results but only after they are judged to be of adequate reliability and to be representative of the particular environmental compartments to which they are applied. In practice, laboratory and field data are used to provide parameters for the models, while monitoring data are used to validate the models' predictions. Thus, comprehensive risk assessments require the integration of laboratory and monitoring data with the model predictions. However, this interplay is often overlooked. Discrepancies between the results of models and monitoring should be investigated in terms of the representativeness of both. Certainly, in the context of the EU risk assessment of existing chemicals, the specific requirements for monitoring data have not been adequately addressed. The resources required for environmental monitoring, both in terms of manpower and equipment, can be very significant. The design of monitoring programmes to optimise the use of resources and the use of models as a cost-effective alternative are increasing in importance. Generic considerations and criteria for the design of new monitoring programmes to generate representative quality data for the aquatic compartment are outlined and the criteria for the use of existing data are discussed. In particular, there is a need to improve the accessibility to data sets, to standardise the data sets, to promote communication and harmonisation of programmes and to incorporate the flexibility to change monitoring protocols to amend the chemicals under investigation in line with changing needs and priorities.     

A Load Shifting Model for Air Pollution Control in the Electric Power Industry

Load-shifting, a relatively inexpensive approach to air pollution control, involves transferring the generating load from one power plant to another according to meteorological conditions. In this paper, an atmospheric dispersion model is adapted to estimate the exposure of the urban population to sulfur dioxide from operating the power system in different ways. Then a mathematical model of the power system of a metropolitan area is constructed to determine the reduction in pollution exposure which could be achieved, and the costs involved. As a case study, the application of the model to St. Louis, Missouri, is simulated. Under favorable conditions, load shifting could reduce pollution exposure up to 95%, while increasing the costs of electric power generation by only 4%. The load-shifting model has use not only as an operational control strategy, but also as an analytical tool to evaluate alternative pollution control measures in the electric power industry.     

Backward location and travel time probabilities for a decaying contaminant in an aquifer

Backward location and travel time probabilities can be used to determine the prior position of contamination in an aquifer. These probabilities, which are related to adjoint states of concentration, can be used to improve characterization of known sources of groundwater contamination, to identify previously unknown contamination sources, and to delineate capture zones. The first contribution of this paper is to extend the adjoint model to the case of a decaying solute (first-order decay), and to describe two different interpretations of backward probabilities. The conventional interpretation accounts for the probability that a contaminant particle could decay before reaching the detection location. The other interpretation is conditioned on the fact that the detected contaminant particle actually reached the detection location, despite this possibility of decay. In either case, travel time probabilities are skewed toward earlier travel times, relative to a conservative solute. The second contribution of this paper is to verify the load term for a monitoring well observation. We provide examples using one-dimensional models and hypothetical aquifers. We employ an infinite domain in order to verify the monitoring well load. This new but simple one-dimensional adjoint solution can also be used to verify higher-dimensional numerical models of backward location and travel time probabilities. We employ a semi-infinite domain to illustrate the effect of decay on backward models of pumping well probabilistic capture zones. Decay causes the capture zones to fall closer to the well.     

Flow Injection Analysis of MWC Fly Ash Leaching Characteristics

Abstract

A completely mixed batch reactor leaching method utilizing flow injection analysis (the CMBR-FIA method) was developed to study the lead leaching characteristics of municipal waste combustor fly ash. Flow injection analysis (FIA) coupled with atomic absorption spectrophotometry enabled the determination of lead concentrations at one minute intervals. The pH and oxidation-reduction potential of the solution were continuously monitored to characterize the leaching conditions. Automatic titration was used to alter the solution pH to defined endpoints. The CMBR-FIA method offers the ability to immediately observe alterations to the leaching solution, and grants the freedom to study a number of parameters concurrently. The CMBR-FIA method is a rapid and reliable means to investigate leaching characteristics. This paper describes the method and demonstrates its use to monitor the leaching of lead from municipal solid waste combustor fly ash as a function of pH. Soluble lead concentrations are shown to increase quickly with decreasing pH.

A maximum of 50% of the total lead concentration was available in solution at pH 2. This value gradually decreased with time to over 35% of the total.     

The perception of aquaculture on the Swedish West Coast

Efforts are on the way on the Swedish West Coast to develop the capacity for cultivation of marine resources, notably of kelps. Given that this is a region of great natural and national heritage, public opposition to marine developments has been identified as a possible risk factor. This survey thus sought to shed light on awareness levels, perceptions of different types of aquaculture and on reactions to a scenario depicting future aquaculture developments on the West Coast. When asked about their general opinions of aquaculture, respondents tended to be favourable though a majority chose neutral responses. On the whole, respondents were favourable to the depicted scenario. Finally, it was found that the high-awareness group tended to be more supportive than the low or medium-awareness groups, hinting at the benefits of increasing awareness to reduce public aversion and to support a sustainable development of aquaculture on the Swedish West Coast.     

Ammonium and nitrate tolerance in lichens

Since lichens lack roots and take up water, solutes and gases over the entire thallus surface, these organisms respond more sensitively to changes in atmospheric purity than vascular plants. After centuries where effects of sulphur dioxide and acidity were in the focus of research on atmospheric chemistry and lichens, recently the globally increased levels of ammonia and nitrate increasingly affect lichen vegetation and gave rise to intense research on the tolerance of lichens to nitrogen pollution. The present paper discusses the main findings on the uptake of ammonia and nitrate in the lichen symbiosis and to the tolerance of lichens to eutrophication. Ammonia and nitrate are both efficiently taken up under ambient conditions. The tolerance to high nitrogen levels depends, among others, on the capability of the photobiont to provide sufficient amounts of carbon skeletons for ammonia assimilation. Lowly productive lichens are apparently predisposed to be sensitive to excess nitrogen.